| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: validate reply message payload bounds against transfer length
nvmet_auth_reply() accesses the variable-length rval[] array using
attacker-controlled hl (hash length) and dhvlen (DH value length) fields
without verifying they fit within the allocated buffer of tl bytes.
A malicious NVMe-oF initiator can craft a DHCHAP_REPLY message with a
small transfer length but large hl/dhvlen values, causing out-of-bounds
heap reads when the target processes the DH public key (rval + 2*hl) or
performs the host response memcmp.
With DH authentication configured, the OOB pointer is passed directly to
sg_init_one() and read by crypto_kpp_compute_shared_secret(), reaching
up to 526 bytes past the buffer. This is exploitable pre-authentication.
Add bounds validation ensuring sizeof(*data) + 2*hl + dhvlen <= tl before
any access to the variable-length fields.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: fix out-of-bounds bit access on mt_io_flags
mt_io_flags is a single unsigned long, but mt_process_slot(),
mt_release_pending_palms() and mt_release_contacts() use it as a
per-slot bitmap indexed by the slot number. That slot number is only
bounded by td->maxcontacts, which is taken from the device's
ContactCountMaximum feature report and can be up to 255, not by
BITS_PER_LONG.
As a result, a multitouch device that advertises a large contact count
makes set_bit()/clear_bit() operate past the mt_io_flags word and
corrupt the adjacent members of struct mt_device. The sticky-fingers
release timer is the easiest way to reach this. mt_release_contacts()
runs
for (i = 0; i < mt->num_slots; i++)
clear_bit(i, &td->mt_io_flags);
with num_slots == maxcontacts. For maxcontacts around 250 the loop
clears the bits that overlap td->applications.next, zeroing that list
head, and the list_for_each_entry() that immediately follows then
dereferences NULL. The kernel panics from timer (softirq) context. On a
KASAN build this shows up as a general protection fault in
mt_release_contacts() with a null-ptr-deref at offset 0x58, which is
offsetof(struct mt_application, num_received).
The state is reachable from an untrusted USB or Bluetooth HID
multitouch device; no local privileges are required.
Store the per-slot active state in a separately allocated bitmap sized
for maxcontacts, the same pattern already used for pending_palm_slots,
and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two
"mt_io_flags & MT_IO_SLOTS_MASK" arming checks become
bitmap_empty(td->active_slots, td->maxcontacts).
Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the
same commit to leave the low byte for the slot bits; with the slot bits
gone it fits in bit 0 again, which also keeps it within the unsigned
long on 32-bit. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (FD links)
proc_pid_get_link() and proc_pid_readlink() currently look up the task from
the pid once, then do the ptrace access check on that task, then look up
the task from the pid a second time to do the actual access.
That's racy in several ways.
To fix it, pass the task to the ->proc_get_link() handler, and instead of
proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that
looks up and locks the task, does the access check, and calls
->proc_get_link(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: harden POSIX SID length parsing
posix_info_sid_size() reads sid[1] to obtain the subauthority count,
but its existing boundary check still accepts buffers with only one
remaining byte. Require two bytes before reading sid[1] so all client
paths that reuse the helper reject truncated POSIX SIDs safely. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix next buffer leak in receive_encrypted_standard()
receive_encrypted_standard() allocates next_buffer before checking
whether the number of compound PDUs already reached MAX_COMPOUND. If
the limit check fails, the function returns immediately and the newly
allocated next_buffer is not assigned to server->smallbuf/server->bigbuf,
making it leaked.
Move the MAX_COMPOUND check before allocating next_buffer. |
| A flaw has been found in kalcaddle kodbox 1.67 Build 02. This vulnerability affects unknown code of the file /index.php?plugin/msgWarning/action of the component msgWarning Plugin. Executing a manipulation can lead to improper authorization. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in OpenAkita up to 1.27.12. This vulnerability affects unknown code of the file /api/upload of the component File Upload API. The manipulation of the argument File results in cross site scripting. The attack may be performed from remote. A high complexity level is associated with this attack. It is stated that the exploitability is difficult. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw was found in the backchannel logout endpoint of the keycloak-services component, which is part of the Red Hat Build of Keycloak. This component handles authentication and session management for applications. The issue occurs when an OIDC identity provider is configured to skip signature validation. In this specific setup, the system incorrectly accepts logout requests that have no cryptographic signature. An attacker who knows certain technical details about a user's session can use this flaw to force that user to be logged out, potentially disrupting their work. |
| The EmbedPress WordPress plugin before 4.6.1 does not validate user-supplied URLs before making server-side requests through unauthenticated endpoints, allowing unauthenticated attackers to induce the site to send HTTP requests to internal hosts and services that WordPress core URL validation does not cover (a blind Server-Side Request Forgery). |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc
vfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time,
looping to skip optional states the device does not support until
*next_fsm is supported. A blocked transition is encoded as
VFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL.
The skip loop does not account for the ERROR sentinel.
state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] is
ERROR, so once *next_fsm becomes ERROR the loop condition stays true and
*next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY and
STOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on a
precopy-capable device, causing the loop to spin forever while holding
the driver state mutex. This can result in a soft lockup, and a panic
with softlockup_panic set.
Terminate the skip loop on the ERROR sentinel so a blocked transition
falls through to the existing return and reports -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: virtio: Validate control metadata from the device
virtio-snd control handling trusts the device-provided control type and
value count returned by the device.
That metadata is then used directly to index g_v2a_type_map[] in
virtsnd_kctl_info(), and to size loops and memcpy() operations in
virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size
virtio_snd_ctl_value and snd_ctl_elem_value arrays.
A buggy or malicious device can therefore trigger out-of-bounds access by
advertising an invalid control type or an oversized value count.
Validate control type and count once in virtsnd_kctl_parse_cfg(), before
querying enumerated items or exposing the control to ALSA. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap002: fix runtime PM leak on read error
gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the
lux value, but if gp2ap002_get_lux() fails, it returns directly. This
skips the pm_runtime_put_autosuspend() call at the "out" label,
permanently leaking a runtime PM reference and preventing the device
from autosuspending.
Replace the direct return with a "goto out" to ensure the reference
is properly dropped on the error path. |
| The wpForo Forum WordPress plugin before 3.1.3 does not restrict which profile fields a member may set when editing their own account, allowing users with a subscriber-level account to write administrator-controlled account-state and reputation fields on their own profile, including self-activating a pending or banned account and forging their forum reputation score. |
| The Brizy WordPress plugin before 2.8.19 does not sanitize or escape featured-image focal-point coordinates submitted through one of its AJAX actions before storing them and later echoing them into HTML attributes in the post editor's Featured Image meta box, allowing users with the Contributor role or above to inject arbitrary web scripts that execute in the session of a higher-privileged user who opens the post for review. |
| A stack-based out-of-bounds read vulnerability exists in the "s_vlog" function of stunnel, when handling oversized log messages via "vsnprintf". A remote attacker with network access to a stunnel service can send protocol inputs that trigger a log message longer than 1024 bytes, leading to an out-of-bounds stack read and a potential crash. In certain corner cases, the same vulnerability could be used to replace a series of trailing "\n" characters with "\0". |
| A vulnerability was found in diaowen DWSurvey up to 6.14.0. Impacted is the function in DwDeisgnSurveyController.devSurvey. of the file /api/dwsurvey/app/v6/dw-design-survey/dev-survey.do of the component Survey Handler. The manipulation results in authorization bypass. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in GL.iNet GL-MT3000 up to 4.4.5. Impacted is the function set_upgrade of the file /cgi-bin/glc of the component modem.so. Such manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. |
| Origin validation error in Microsoft Edge (Chromium-based) allows an unauthorized attacker to perform tampering over a network. |
| Access of resource using incompatible type ('type confusion') in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network. |
| The Clearfy Cache WordPress plugin before 2.4.3 does not validate the redirect target in its Cyrlitera old-URL redirect handler, passing a decoded request URI to an unsafe redirect function, which allows unauthenticated attackers to redirect visitors to an arbitrary external URL when a non-default option is enabled. |
