| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix GISC refcount leak on AIF enable failure
kvm_s390_gisc_register() registers the guest ISC before pinning
the guest interrupt forwarding pages and allocating the AISB bit.
If any of the later setup steps fails, the function unwinds the
pinned pages and other local state, but does not unregister the
GISC reference. Add the missing kvm_s390_gisc_unregister() to the
error unwind path. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix unlikely race in try_get_locked_pte()
Fix an unlikely race in try_get_locked_pte(), which could have happened
if puds or pmds get unmapped between the p?dp_get() and p?d_offset()
functions. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-control: Validate notification payload size
Validate MODULE_NOTIFICATION payload length before reading
bytes/channel data in control update handling. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: Fix race in vduse_dev_msg_sync and vduse_dev_read_iter
There is one race case in vduse_dev_msg_sync and vduse_dev_read_iter:
vduse_dev_read_iter():
lock(msg_lock);
dequeue_msg(send_list);
unlock(msg_lock);
vduse_dev_msg_sync():
wait_timeout() finish
lock(msg_lock);
check msg->complete is false
list_del(msg); <- double list_del() crash!
To fix this case, we shall ensure vduse_msg is on send_list or recv_list
outside the msg_lock critical section. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: fix refcount leak in mlxsw_sp_vrs_lpm_tree_replace()
When mlxsw_sp_vrs_lpm_tree_replace() fails after replacing some VRs,
the error rollback loop does not correctly revert the preceding
replacements. The loop decrements the index but fails to update the
vr pointer, which still points to the VR that caused the failure. As
a result, the condition and the rollback call always operate on the
same VR, potentially calling mlxsw_sp_vr_lpm_tree_replace() multiple
times on it while never rolling back the earlier VRs. Those VRs
continue to hold a reference to new_tree acquired via
mlxsw_sp_lpm_tree_hold(), leaking the reference count of new_tree.
Fix by reinitializing vr inside the error loop with the updated index:
vr = &mlxsw_sp->router->vrs[i];
so that the loop correctly iterates over all VRs that were actually
replaced. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix VF bringup affecting PF promiscuous state
Mbox handling of nix_set_rx_mode for a VF with promiscuous and
all_multi flags set to false causes deletion of the PF's promiscuous
and allmulti MCAM rules. This occurs because the APIs that
enable/disable these rules operate only on the PF, even when the
mbox request is made via a VF interface.
Guard both rvu_npc_enable_allmulti_entry() and
rvu_npc_enable_promisc_entry() disable paths with an is_vf() check so
that a VF bringing up or tearing down its interface cannot inadvertently
clear the PF's MCAM rules. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/fb-helper: Only consider active CRTCs for vblank sync
Only synchronize fbdev output to the vblank of an active CRTC. Go over
the list of CRTCs and pick the first that matches. Fixes warnings as
the one shown below
[ 77.201354] WARNING: drivers/gpu/drm/drm_vblank.c:1320 at drm_crtc_wait_one_vblank+0x194/0x1cc [drm], CPU#1: kworker/1:7/1867
[ 77.201354] omapdrm omapdrm.0: [drm] vblank wait timed out on crtc 0
This currently happens if the fbdev output is not on CRTC 0.
Atomic and non-atomic drivers require distinct code paths. As for other
fbdev operations, implement both and select the correct one at runtime.
Not finding an active CRTC is not a bug. Do not wait in this case, but
flush the display update as before.
v4:
- avoid possible deadlocks with locking context (Sashiko)
v3:
- drop excessive state validation (Jani)
- acquire plane and CRTC mutices (Sashiko)
v2:
- move look-up code into separate helper
- support drivers with legacy modesetting
v1:
- see https://lore.kernel.org/dri-devel/1c9e0e24-9c4a-4259-8700-cf9e5fd60ca3@suse.de/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: fix NPD in bo_meminfo()
When a buffer object is purged, its ttm.resource is set to NULL via the
TTM pipeline gutting flow. However, the BO remains in the client's
object list until userspace explicitly closes the GEM handle. If memory
stats are queried during this time, accessing bo->ttm.resource->mem_type
will result in a NULL pointer dereference.
Fix this by safely skipping purged BOs in bo_meminfo, as they no longer
consume any memory.
User is getting NPD on device resume, and possible theory is that in
bo_move(), if we need to evict something to SYSTEM to save the CCS state,
but the BO is marked as dontneed, this won't trigger a move but will
nuke the pages, leaving us with a NULL bo resource. And the meminfo()
doesn't look ready to handle a NULL resource.
v2 (Sashiko):
- There could potentially be other cases where we might end up with a
NULL resource, so make this a general NULL check for now.
(cherry picked from commit c9a8e7daa0afe3161111e27fd92176e608c7f186) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pt: Fix NULL pointer dereference in xe_pt_zap_ptes_entry()
The page-table walk framework may pass a NULL *child pointer for
unpopulated entries. xe_pt_zap_ptes_entry() called container_of(*child)
before checking for NULL, then dereferenced the result, causing a crash.
Move the container_of() call after a NULL guard, so the function returns
early instead of proceeding with an invalid pointer. XE_WARN_ON is kept
to help root cause the issue, but we now bail instead of crashing the
driver.
v2: Comment that triggering XE_WARN_ON is unexpected behavior (Matt Brost)
(cherry picked from commit b9297d19d9df5d4b6c994648570c5dcd1cac68ff) |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix reinitialisation of the inode, in particular ->lock_work
It seems that initalising afs_vnode::lock_work a single time in the slab's
init function isn't sufficient for work_structs. This results in the
DEBUG_OBJECTS debugging stuff producing a warning occasionally when running
the generic/131 xfstest:
ODEBUG: activate not available (active state 0) object: 0000000016d8760f object type: work_struct hint: afs_lock_work+0x0/0x220
WARNING: lib/debugobjects.c:629 at debug_print_object+0x4b/0x90, CPU#3: locktest/7695
...
CPU: 3 UID: 0 PID: 7695 Comm: locktest Tainted: G S 7.1.0-build3+ #2771 PREEMPT
...
RIP: 0010:debug_print_object+0x65/0x90
...
Call Trace:
<TASK>
? __pfx_afs_lock_work+0x10/0x10
debug_object_activate+0x122/0x170
insert_work+0x25/0x60
__queue_work+0x2e0/0x340
queue_delayed_work_on+0x48/0x70
afs_fl_release_private+0x57/0x70
locks_release_private+0x5c/0xa0
locks_free_lock+0xe/0x20
posix_lock_inode+0x55f/0x5b0
locks_lock_inode_wait+0x81/0x140
? file_write_and_wait_range+0x50/0x70
afs_lock+0xcd/0x110
fcntl_setlk+0x10d/0x260
do_fcntl+0x24e/0x5b0
__do_sys_fcntl+0x6a/0x90
do_syscall_64+0x11e/0x310
entry_SYSCALL_64_after_hwframe+0x71/0x79
Fix this by reinitialising ->lock_work after allocating an inode.
Also, flush ->lock_work when the inode is being evicted to make sure it's
not still running. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix order of kfree_rcu() and rcu_assign_pointer()
Sashiko pointed out that kfree_rcu() was called before
rcu_assign_pointer() in handling the comment extension.
Fix the order so that rcu_assign_pointer() called first. |
| In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: check device type before reading ETH_ADDRS
__skb_flow_dissect() unconditionally reads 12 bytes from eth_hdr(skb)
when FLOW_DISSECTOR_KEY_ETH_ADDRS is requested. This assumes the skb
has a valid Ethernet header at mac_header, which is not always the case.
The problem can be triggered by:
1. Creating a TUN device in L3 mode (IFF_TUN, hard_header_len=0)
2. Attaching a multiq qdisc with a flower filter matching on eth_src
3. Sending a packet through AF_PACKET
Since TUN in L3 mode has no link-layer header, mac_header points to
the L3 data area. The flow dissector reads 12 bytes of uninitialized
skb memory, which then propagates through fl_set_masked_key() and is
used as a rhashtable lookup key in __fl_lookup(), as reported by KMSAN.
Rejecting the filter in the control path (at tc filter add time) is
not feasible because TC filter blocks can be shared between arbitrary
devices -- a filter installed on an Ethernet device may later classify
packets on a headerless device through a shared block. The device
association is not fixed at filter creation time.
Fix this by gating the memcpy on dev->type == ARPHRD_ETHER, which
ensures only true Ethernet-framed packets have their addresses read.
This is more precise than the previous hard_header_len >= 12 check,
which would incorrectly pass for non-Ethernet link types like IPoIB
(ARPHRD_INFINIBAND, hard_header_len=24) and FDDI (hard_header_len=21)
whose L2 headers are not in Ethernet format. Additionally check
skb_mac_header_was_set() to guard against the pathological case where
mac_header is the unset sentinel (~0U), which would cause eth_hdr() to
return a wild pointer.
For the act_mirred redirect case (Ethernet packet redirected to a
non-Ethernet device sharing a TC block), zeroing the key is the correct
behavior: the packet is now being classified on the target device, where
Ethernet address matching is not semantically meaningful.
Note: on non-Ethernet devices, the zeroed key will match a filter
configured with all-zero MAC addresses. This is an improvement over the
previous behavior where uninitialized memory could randomly match any
filter. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: hold socket lock when dumping endpoints in sctp_diag
SCTP_DIAG endpoint dumping was traversing endpoint address lists without
holding lock_sock(), while those lists could change concurrently via
socket operations (e.g., bindx changes). This creates a race where
nla_reserve() counts addresses under RCU protection, but the subsequent
copy may see fewer entries, potentially leaking uninitialized memory to
userspace.
Fix this by:
- Taking a reference on each endpoint during hash traversal
- Moving socket operations (lock_sock()) outside read_lock_bh()
- Serializing address list access during dump
- Reworking sctp_for_each_endpoint() to support restart-based traversal
with (net, pos) tracking
Also:
- Add WARN_ON_ONCE() for inconsistent address counts
- Fix idiag_states filtering for LISTEN vs association cases
- Skip dumping endpoints being freed (ep->base.dead)
- Move dump position tracking into iterator, removing cb->args[4] and
its comment for sctp_ep_dump().,
- Update the comment for cb->args[4] and remove the comment for unused
cb->args[5] for sctp_sock_dump().
Note: traversal is restart-based and may re-scan buckets multiple times,
but this is acceptable due to small bucket sizes and required to support
sleeping-safe callbacks.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative. |
| In the Linux kernel, the following vulnerability has been resolved:
net: watchdog: fix refcount tracking races
Blamed commit converted the untracked dev_hold()/dev_put() calls
in the watchdog code to use the tracked dev_hold_track()/dev_put_track()
(which were later renamed/interfaced to netdev_hold() and netdev_put()).
By introducing dev->watchdog_dev_tracker to store the
reference tracking information without adding synchronization
between netdev_watchdog_up() and dev_watchdog(), it enabled the
race condition where this pointer could be overwritten or freed
concurrently, leading to the list corruption crash syzbot reported:
list_del corruption, ffff888114a18c00->next is NULL
kernel BUG at lib/list_debug.c:52 !
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 91 Comm: kworker/u8:5 Not tainted syzkaller #0 PREEMPT(lazy)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026
Workqueue: events_unbound linkwatch_event
RIP: 0010:__list_del_entry_valid_or_report.cold+0x22/0x2a lib/list_debug.c:52
Call Trace:
<TASK>
__list_del_entry_valid include/linux/list.h:132 [inline]
__list_del_entry include/linux/list.h:246 [inline]
list_move_tail include/linux/list.h:341 [inline]
ref_tracker_free+0x1a7/0x6c0 lib/ref_tracker.c:329
netdev_tracker_free include/linux/netdevice.h:4491 [inline]
netdev_put include/linux/netdevice.h:4508 [inline]
netdev_put include/linux/netdevice.h:4504 [inline]
netdev_watchdog_down net/sched/sch_generic.c:600 [inline]
dev_deactivate_many+0x28c/0xfe0 net/sched/sch_generic.c:1363
dev_deactivate+0x109/0x1d0 net/sched/sch_generic.c:1397
linkwatch_do_dev net/core/link_watch.c:184 [inline]
linkwatch_do_dev+0xd3/0x120 net/core/link_watch.c:166
__linkwatch_run_queue+0x3a5/0x810 net/core/link_watch.c:240
linkwatch_event+0x8f/0xc0 net/core/link_watch.c:314
process_one_work+0xa0e/0x1980 kernel/workqueue.c:3314
process_scheduled_works kernel/workqueue.c:3397 [inline]
worker_thread+0x5ef/0xe50 kernel/workqueue.c:3478
kthread+0x370/0x450 kernel/kthread.c:436
ret_from_fork+0x69a/0xc80 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
This patch has three coordinated parts:
1) Add dev->watchdog_lock and dev->watchdog_ref_held to serialize watchdog operations.
2) Remove netdev_watchdog_up() call from netif_carrier_on():
This ensures netdev_watchdog_up() is only called from process/BH context
(via linkwatch workqueue dev_activate()), allowing us to use
spin_lock_bh() for synchronization.
3) Synchronize watchdog up and watchdog timer:
Protect netdev_watchdog_up() with tx_global_lock and watchdog_lock.
Only allocate a new tracker in netdev_watchdog_up() if one is
not already present.
In dev_watchdog(), ensure we don't release the tracker if the
timer was rescheduled either by dev_watchdog() itself or concurrently
by netdev_watchdog_up(). |
| A weakness has been identified in Jinher OA 1.0. Impacted is an unknown function of the file /C6/JHSoft.Web.HrmAttendance/attendance_out_approve.aspx. This manipulation of the argument httpOID causes sql injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix potential amdxdna_umap lifetime race
amdxdna_umap_release() calls the blocking mmu_interval_notifier_remove()
before removing the object from abo->mem.umap_list. If
aie2_populate_range() runs concurrently, it may obtain a reference to an
amdxdna_umap that is being released, leading to a potential use-after-free.
Use kref_get_unless_zero() in aie2_populate_range() when acquiring a
reference. If the reference count has already dropped to zero, release
is in progress and the entry is skipped. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix VMA access race
aie2_populate_range() and amdxdna_umap_release() access a saved VMA
pointer that may have already been freed, leading to a potential
use-after-free.
Remove the VMA accesses from these functions to avoid the race. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix adv monitor add failure cleanup
hci_add_adv_monitor() publishes a new adv_monitor in
hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT
offload add path can then fail either locally before the controller add
command completes, or in the MSFT add callback. In the current queued
management add flow, hci_cmd_sync_work() still invokes
mgmt_add_adv_patterns_monitor_complete() with the original pending command
after msft_add_monitor_pattern() returns.
The buggy scenario involves two paths, with each column showing the order
within that path:
MSFT add handling MGMT completion
1. insert monitor and handle 1. receive sync error
2. send MSFT add command 2. call add-monitor completion
3. callback sees bad response 3. load cmd->user_data
4. callback frees monitor 4. read monitor->handle
Local MSFT setup failures have the other half of the same ownership bug:
they return an error after the IDR insertion, but no later code removes the
failed monitor from the IDR.
Keep ownership with the pending management command until its completion.
For normal management adds, the MSFT add callback now records successful
controller state and returns errors to its caller. The management
completion frees the monitor on non-success after copying the response
handle, while resume/reregister callback-error cleanup remains in the
MSFT callback. The success path keeps the existing bookkeeping.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x19f/0x330
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
kasan_report+0xe0/0x110
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? 0xffffffffc00d00da
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? hci_cmd_sync_work+0x1ab/0x210 [bluetooth]
hci_cmd_sync_work+0x1c0/0x210 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
process_one_work+0x4fd/0xbc0
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 471 on cpu 3 at 285.205389s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
__sys_sendto+0x2bc/0x2d0
__x64_sys_sendto+0x76/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 454 on cpu 2 at 285.217112s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
msft_add_monitor_sync+0x54a/0x570 [bluetooth]
hci_add_adv_monitor+0x133/0x180 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
net: microchip: vcap: fix races on the shared Super VCAP block
The VCAP instances on a chip are not independent, yet they are locked
independently. On sparx5 and lan969x the IS0 and IS2 instances are
backed by the same Super VCAP hardware block and share its cache and
command registers: every access drives the shared VCAP_SUPER_CTRL
register and moves data through the shared cache registers.
Accessing one instance therefore races with accessing another. The
per-instance admin->lock cannot prevent this, as each instance takes a
different lock.
The locking issue is mostly disguised by the fact that the core usage of
the vcap api runs under rtnl. However, the full rule dump in debugfs
decodes rules straight from hardware (a READ command followed by a cache
read) and runs outside rtnl, so it races a concurrent tc-flower rule
write to another Super VCAP instance.
Besides corrupting the dump, the read repopulates the shared cache
between the writers cache fill and its write command, so the writer
commits the wrong data and corrupts the hardware entry.
Introduce vcap_lock() and vcap_unlock() helpers and route every rule
lock site in the VCAP API and its debugfs code through them. Replace the
per-instance admin->lock with a single mutex in struct vcap_control that
serializes access to all instances. The helpers reach it through a new
admin->vctrl back-pointer, and the clients initialise and destroy the
control lock instead of a per-instance one.
No path holds more than one instance lock, so collapsing them onto a
single mutex cannot self-deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix publication race for priv->channel_stats[]
mlx5e_channel_stats_alloc() publishes a new entry to
priv->channel_stats[] and then increments priv->stats_nch as a
publication token, but neither store carries any memory barrier:
priv->channel_stats[ix] = kvzalloc_node(...);
if (!priv->channel_stats[ix])
return -ENOMEM;
priv->stats_nch++;
Concurrent readers compute the loop bound from priv->stats_nch and
then dereference priv->channel_stats[i] using plain accesses, e.g.
for (i = 0; i < priv->stats_nch; i++) {
struct mlx5e_channel_stats *cs = priv->channel_stats[i];
... cs->rq.packets ...
}
On weakly-ordered architectures (ARM, PowerPC, RISC-V) the writes to
channel_stats[ix] and stats_nch may become visible to other CPUs out
of program order. A reader can observe stats_nch == N while still
seeing channel_stats[N-1] == NULL, leading to a NULL pointer
dereference in the channel_stats loop.
This has been observed in production on BlueField-3 DPUs (arm64),
where ovs-vswitchd queries netdev statistics over netlink during NIC
bringup, racing mlx5e_open_channel() -> mlx5e_channel_stats_alloc()
on another CPU:
Unable to handle kernel NULL pointer dereference at virtual address 0x840
Hardware name: BlueField-3 DPU
pc : mlx5e_fold_sw_stats64+0x30/0x180 [mlx5_core]
Call trace:
mlx5e_fold_sw_stats64+0x30/0x180 [mlx5_core]
dev_get_stats+0x50/0xc0
ovs_vport_get_stats+0x38/0xac [openvswitch]
ovs_vport_cmd_fill_info+0x194/0x290 [openvswitch]
ovs_vport_cmd_get+0xbc/0x10c [openvswitch]
genl_family_rcv_msg_doit+0xd0/0x160
genl_rcv_msg+0xec/0x1f0
netlink_rcv_skb+0x64/0x130
genl_rcv+0x40/0x60
netlink_unicast+0x2fc/0x370
netlink_sendmsg+0x1dc/0x454
...
__arm64_sys_sendmsg+0x2c/0x40
Add mlx5e_stats_nch_write() and mlx5e_stats_nch_read() helpers in en.h
that wrap the smp_store_release()/smp_load_acquire() pair on stats_nch.
The release/acquire pair establishes the contract:
stats_nch == N => channel_stats[0..N-1] are visible and non-NULL.
Publish the stats_nch increment via mlx5e_stats_nch_write() in the
writer (mlx5e_channel_stats_alloc()), and read stats_nch via
mlx5e_stats_nch_read() in all readers: mlx5e RX/TX queue stats,
mlx5e_get_base_stats(), ethtool channels stats, IPoIB stats, the
sw_stats fold and the HV VHCA stats agent. |
