| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx5: Fix potential deadlock in MR deregistration
The issue arises when kzalloc() is invoked while holding umem_mutex or
any other lock acquired under umem_mutex. This is problematic because
kzalloc() can trigger fs_reclaim_aqcuire(), which may, in turn, invoke
mmu_notifier_invalidate_range_start(). This function can lead to
mlx5_ib_invalidate_range(), which attempts to acquire umem_mutex again,
resulting in a deadlock.
The problematic flow:
CPU0 | CPU1
---------------------------------------|------------------------------------------------
mlx5_ib_dereg_mr() |
→ revoke_mr() |
→ mutex_lock(&umem_odp->umem_mutex) |
| mlx5_mkey_cache_init()
| → mutex_lock(&dev->cache.rb_lock)
| → mlx5r_cache_create_ent_locked()
| → kzalloc(GFP_KERNEL)
| → fs_reclaim()
| → mmu_notifier_invalidate_range_start()
| → mlx5_ib_invalidate_range()
| → mutex_lock(&umem_odp->umem_mutex)
→ cache_ent_find_and_store() |
→ mutex_lock(&dev->cache.rb_lock) |
Additionally, when kzalloc() is called from within
cache_ent_find_and_store(), we encounter the same deadlock due to
re-acquisition of umem_mutex.
Solve by releasing umem_mutex in dereg_mr() after umr_revoke_mr()
and before acquiring rb_lock. This ensures that we don't hold
umem_mutex while performing memory allocations that could trigger
the reclaim path.
This change prevents the deadlock by ensuring proper lock ordering and
avoiding holding locks during memory allocation operations that could
trigger the reclaim path.
The following lockdep warning demonstrates the deadlock:
python3/20557 is trying to acquire lock:
ffff888387542128 (&umem_odp->umem_mutex){+.+.}-{4:4}, at:
mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib]
but task is already holding lock:
ffffffff82f6b840 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at:
unmap_vmas+0x7b/0x1a0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}:
fs_reclaim_acquire+0x60/0xd0
mem_cgroup_css_alloc+0x6f/0x9b0
cgroup_init_subsys+0xa4/0x240
cgroup_init+0x1c8/0x510
start_kernel+0x747/0x760
x86_64_start_reservations+0x25/0x30
x86_64_start_kernel+0x73/0x80
common_startup_64+0x129/0x138
-> #2 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x91/0xd0
__kmalloc_cache_noprof+0x4d/0x4c0
mlx5r_cache_create_ent_locked+0x75/0x620 [mlx5_ib]
mlx5_mkey_cache_init+0x186/0x360 [mlx5_ib]
mlx5_ib_stage_post_ib_reg_umr_init+0x3c/0x60 [mlx5_ib]
__mlx5_ib_add+0x4b/0x190 [mlx5_ib]
mlx5r_probe+0xd9/0x320 [mlx5_ib]
auxiliary_bus_probe+0x42/0x70
really_probe+0xdb/0x360
__driver_probe_device+0x8f/0x130
driver_probe_device+0x1f/0xb0
__driver_attach+0xd4/0x1f0
bus_for_each_dev+0x79/0xd0
bus_add_driver+0xf0/0x200
driver_register+0x6e/0xc0
__auxiliary_driver_register+0x6a/0xc0
do_one_initcall+0x5e/0x390
do_init_module+0x88/0x240
init_module_from_file+0x85/0xc0
idempotent_init_module+0x104/0x300
__x64_sys_finit_module+0x68/0xc0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #1 (&dev->cache.rb_lock){+.+.}-{4:4}:
__mutex_lock+0x98/0xf10
__mlx5_ib_dereg_mr+0x6f2/0x890 [mlx5_ib]
mlx5_ib_dereg_mr+0x21/0x110 [mlx5_ib]
ib_dereg_mr_user+0x85/0x1f0 [ib_core]
---truncated--- |
| A vulnerability was determined in SourceCodester Farm Management System 1.0. Affected by this vulnerability is an unknown functionality. This manipulation causes exposure of information through directory listing. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: appletb-kbd: fix memory corruption of input_handler_list
In appletb_kbd_probe an input handler is initialised and then registered
with input core through input_register_handler(). When this happens input
core will add the input handler (specifically its node) to the global
input_handler_list. The input_handler_list is central to the functionality
of input core and is traversed in various places in input core. An example
of this is when a new input device is plugged in and gets registered with
input core.
The input_handler in probe is allocated as device managed memory. If a
probe failure occurs after input_register_handler() the input_handler
memory is freed, yet it will remain in the input_handler_list. This
effectively means the input_handler_list contains a dangling pointer
to data belonging to a freed input handler.
This causes an issue when any other input device is plugged in - in my
case I had an old PixArt HP USB optical mouse and I decided to
plug it in after a failure occurred after input_register_handler().
This lead to the registration of this input device via
input_register_device which involves traversing over every handler
in the corrupted input_handler_list and calling input_attach_handler(),
giving each handler a chance to bind to newly registered device.
The core of this bug is a UAF which causes memory corruption of
input_handler_list and to fix it we must ensure the input handler is
unregistered from input core, this is done through
input_unregister_handler().
[ 63.191597] ==================================================================
[ 63.192094] BUG: KASAN: slab-use-after-free in input_attach_handler.isra.0+0x1a9/0x1e0
[ 63.192094] Read of size 8 at addr ffff888105ea7c80 by task kworker/0:2/54
[ 63.192094]
[ 63.192094] CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.16.0-rc2-00321-g2aa6621d
[ 63.192094] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.164
[ 63.192094] Workqueue: usb_hub_wq hub_event
[ 63.192094] Call Trace:
[ 63.192094] <TASK>
[ 63.192094] dump_stack_lvl+0x53/0x70
[ 63.192094] print_report+0xce/0x670
[ 63.192094] kasan_report+0xce/0x100
[ 63.192094] input_attach_handler.isra.0+0x1a9/0x1e0
[ 63.192094] input_register_device+0x76c/0xd00
[ 63.192094] hidinput_connect+0x686d/0xad60
[ 63.192094] hid_connect+0xf20/0x1b10
[ 63.192094] hid_hw_start+0x83/0x100
[ 63.192094] hid_device_probe+0x2d1/0x680
[ 63.192094] really_probe+0x1c3/0x690
[ 63.192094] __driver_probe_device+0x247/0x300
[ 63.192094] driver_probe_device+0x49/0x210
[ 63.192094] __device_attach_driver+0x160/0x320
[ 63.192094] bus_for_each_drv+0x10f/0x190
[ 63.192094] __device_attach+0x18e/0x370
[ 63.192094] bus_probe_device+0x123/0x170
[ 63.192094] device_add+0xd4d/0x1460
[ 63.192094] hid_add_device+0x30b/0x910
[ 63.192094] usbhid_probe+0x920/0xe00
[ 63.192094] usb_probe_interface+0x363/0x9a0
[ 63.192094] really_probe+0x1c3/0x690
[ 63.192094] __driver_probe_device+0x247/0x300
[ 63.192094] driver_probe_device+0x49/0x210
[ 63.192094] __device_attach_driver+0x160/0x320
[ 63.192094] bus_for_each_drv+0x10f/0x190
[ 63.192094] __device_attach+0x18e/0x370
[ 63.192094] bus_probe_device+0x123/0x170
[ 63.192094] device_add+0xd4d/0x1460
[ 63.192094] usb_set_configuration+0xd14/0x1880
[ 63.192094] usb_generic_driver_probe+0x78/0xb0
[ 63.192094] usb_probe_device+0xaa/0x2e0
[ 63.192094] really_probe+0x1c3/0x690
[ 63.192094] __driver_probe_device+0x247/0x300
[ 63.192094] driver_probe_device+0x49/0x210
[ 63.192094] __device_attach_driver+0x160/0x320
[ 63.192094] bus_for_each_drv+0x10f/0x190
[ 63.192094] __device_attach+0x18e/0x370
[ 63.192094] bus_probe_device+0x123/0x170
[ 63.192094] device_add+0xd4d/0x1460
[ 63.192094] usb_new_device+0x7b4/0x1000
[ 63.192094] hub_event+0x234d/0x3
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-multipath: fix suspicious RCU usage warning
When I run the NVME over TCP test in virtme-ng, I get the following
"suspicious RCU usage" warning in nvme_mpath_add_sysfs_link():
'''
[ 5.024557][ T44] nvmet: Created nvm controller 1 for subsystem nqn.2025-06.org.nvmexpress.mptcp for NQN nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77.
[ 5.027401][ T183] nvme nvme0: creating 2 I/O queues.
[ 5.029017][ T183] nvme nvme0: mapped 2/0/0 default/read/poll queues.
[ 5.032587][ T183] nvme nvme0: new ctrl: NQN "nqn.2025-06.org.nvmexpress.mptcp", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77
[ 5.042214][ T25]
[ 5.042440][ T25] =============================
[ 5.042579][ T25] WARNING: suspicious RCU usage
[ 5.042705][ T25] 6.16.0-rc3+ #23 Not tainted
[ 5.042812][ T25] -----------------------------
[ 5.042934][ T25] drivers/nvme/host/multipath.c:1203 RCU-list traversed in non-reader section!!
[ 5.043111][ T25]
[ 5.043111][ T25] other info that might help us debug this:
[ 5.043111][ T25]
[ 5.043341][ T25]
[ 5.043341][ T25] rcu_scheduler_active = 2, debug_locks = 1
[ 5.043502][ T25] 3 locks held by kworker/u9:0/25:
[ 5.043615][ T25] #0: ffff888008730948 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x7ed/0x1350
[ 5.043830][ T25] #1: ffffc900001afd40 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0xcf3/0x1350
[ 5.044084][ T25] #2: ffff888013ee0020 (&head->srcu){.+.+}-{0:0}, at: nvme_mpath_add_sysfs_link.part.0+0xb4/0x3a0
[ 5.044300][ T25]
[ 5.044300][ T25] stack backtrace:
[ 5.044439][ T25] CPU: 0 UID: 0 PID: 25 Comm: kworker/u9:0 Not tainted 6.16.0-rc3+ #23 PREEMPT(full)
[ 5.044441][ T25] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 5.044442][ T25] Workqueue: async async_run_entry_fn
[ 5.044445][ T25] Call Trace:
[ 5.044446][ T25] <TASK>
[ 5.044449][ T25] dump_stack_lvl+0x6f/0xb0
[ 5.044453][ T25] lockdep_rcu_suspicious.cold+0x4f/0xb1
[ 5.044457][ T25] nvme_mpath_add_sysfs_link.part.0+0x2fb/0x3a0
[ 5.044459][ T25] ? queue_work_on+0x90/0xf0
[ 5.044461][ T25] ? lockdep_hardirqs_on+0x78/0x110
[ 5.044466][ T25] nvme_mpath_set_live+0x1e9/0x4f0
[ 5.044470][ T25] nvme_mpath_add_disk+0x240/0x2f0
[ 5.044472][ T25] ? __pfx_nvme_mpath_add_disk+0x10/0x10
[ 5.044475][ T25] ? add_disk_fwnode+0x361/0x580
[ 5.044480][ T25] nvme_alloc_ns+0x81c/0x17c0
[ 5.044483][ T25] ? kasan_quarantine_put+0x104/0x240
[ 5.044487][ T25] ? __pfx_nvme_alloc_ns+0x10/0x10
[ 5.044495][ T25] ? __pfx_nvme_find_get_ns+0x10/0x10
[ 5.044496][ T25] ? rcu_read_lock_any_held+0x45/0xa0
[ 5.044498][ T25] ? validate_chain+0x232/0x4f0
[ 5.044503][ T25] nvme_scan_ns+0x4c8/0x810
[ 5.044506][ T25] ? __pfx_nvme_scan_ns+0x10/0x10
[ 5.044508][ T25] ? find_held_lock+0x2b/0x80
[ 5.044512][ T25] ? ktime_get+0x16d/0x220
[ 5.044517][ T25] ? kvm_clock_get_cycles+0x18/0x30
[ 5.044520][ T25] ? __pfx_nvme_scan_ns_async+0x10/0x10
[ 5.044522][ T25] async_run_entry_fn+0x97/0x560
[ 5.044523][ T25] ? rcu_is_watching+0x12/0xc0
[ 5.044526][ T25] process_one_work+0xd3c/0x1350
[ 5.044532][ T25] ? __pfx_process_one_work+0x10/0x10
[ 5.044536][ T25] ? assign_work+0x16c/0x240
[ 5.044539][ T25] worker_thread+0x4da/0xd50
[ 5.044545][ T25] ? __pfx_worker_thread+0x10/0x10
[ 5.044546][ T25] kthread+0x356/0x5c0
[ 5.044548][ T25] ? __pfx_kthread+0x10/0x10
[ 5.044549][ T25] ? ret_from_fork+0x1b/0x2e0
[ 5.044552][ T25] ? __lock_release.isra.0+0x5d/0x180
[ 5.044553][ T25] ? ret_from_fork+0x1b/0x2e0
[ 5.044555][ T25] ? rcu_is_watching+0x12/0xc0
[ 5.044557][ T25] ? __pfx_kthread+0x10/0x10
[ 5.04
---truncated--- |
| A NULL pointer dereference vulnerability was discovered in radare2 6.0.5 and earlier within the load() function of bin_dyldcache.c. Processing a crafted file can cause a segmentation fault and crash the program. |
| A NULL pointer dereference vulnerability was discovered in radare2 6.0.5 and earlier within the info() function of bin_ne.c. A crafted binary input can trigger a segmentation fault, leading to a denial of service when the tool processes malformed data. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix regression with native SMB symlinks
Some users and customers reported that their backup/copy tools started
to fail when the directory being copied contained symlink targets that
the client couldn't parse - even when those symlinks weren't followed.
Fix this by allowing lstat(2) and readlink(2) to succeed even when the
client can't resolve the symlink target, restoring old behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
video: screen_info: Relocate framebuffers behind PCI bridges
Apply PCI host-bridge window offsets to screen_info framebuffers. Fixes
invalid access to I/O memory.
Resources behind a PCI host bridge can be relocated by a certain offset
in the kernel's CPU address range used for I/O. The framebuffer memory
range stored in screen_info refers to the CPU addresses as seen during
boot (where the offset is 0). During boot up, firmware may assign a
different memory offset to the PCI host bridge and thereby relocating
the framebuffer address of the PCI graphics device as seen by the kernel.
The information in screen_info must be updated as well.
The helper pcibios_bus_to_resource() performs the relocation of the
screen_info's framebuffer resource (given in PCI bus addresses). The
result matches the I/O-memory resource of the PCI graphics device (given
in CPU addresses). As before, we store away the information necessary to
later update the information in screen_info itself.
Commit 78aa89d1dfba ("firmware/sysfb: Update screen_info for relocated
EFI framebuffers") added the code for updating screen_info. It is based
on similar functionality that pre-existed in efifb. Efifb uses a pointer
to the PCI resource, while the newer code does a memcpy of the region.
Hence efifb sees any updates to the PCI resource and avoids the issue.
v3:
- Only use struct pci_bus_region for PCI bus addresses (Bjorn)
- Clarify address semantics in commit messages and comments (Bjorn)
v2:
- Fixed tags (Takashi, Ivan)
- Updated information on efifb |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: wcd9375: Fix double free of regulator supplies
Driver gets regulator supplies in probe path with
devm_regulator_bulk_get(), so should not call regulator_bulk_free() in
error and remove paths to avoid double free. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd: pmf: Use device managed allocations
If setting up smart PC fails for any reason then this can lead to
a double free when unloading amd-pmf. This is because dev->buf was
freed but never set to NULL and is again freed in amd_pmf_remove().
To avoid subtle allocation bugs in failures leading to a double free
change all allocations into device managed allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix eswitch code memory leak in reset scenario
Add simple eswitch mode checker in attaching VF procedure and allocate
required port representor memory structures only in switchdev mode.
The reset flows triggers VF (if present) detach/attach procedure.
It might involve VF port representor(s) re-creation if the device is
configured is switchdev mode (not legacy one).
The memory was blindly allocated in current implementation,
regardless of the mode and not freed if in legacy mode.
Kmemeleak trace:
unreferenced object (percpu) 0x7e3bce5b888458 (size 40):
comm "bash", pid 1784, jiffies 4295743894
hex dump (first 32 bytes on cpu 45):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
pcpu_alloc_noprof+0x4c4/0x7c0
ice_repr_create+0x66/0x130 [ice]
ice_repr_create_vf+0x22/0x70 [ice]
ice_eswitch_attach_vf+0x1b/0xa0 [ice]
ice_reset_all_vfs+0x1dd/0x2f0 [ice]
ice_pci_err_resume+0x3b/0xb0 [ice]
pci_reset_function+0x8f/0x120
reset_store+0x56/0xa0
kernfs_fop_write_iter+0x120/0x1b0
vfs_write+0x31c/0x430
ksys_write+0x61/0xd0
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Testing hints (ethX is PF netdev):
- create at least one VF
echo 1 > /sys/class/net/ethX/device/sriov_numvfs
- trigger the reset
echo 1 > /sys/class/net/ethX/device/reset |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850
GCC_GCC_PCIE_HOT_RST is wrongly defined for WCN7850, causing kernel crash
on some specific platforms.
Since this register is divergent for WCN7850 and QCN9274, move it to
register table to allow different definitions. Then correct the register
address for WCN7850 to fix this issue.
Note IPQ5332 is not affected as it is not PCIe based device.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
| Information Disclosure in web-accessible backup file in SourceCodester Simple Online Book Store System allows a remote unauthenticated attacker to disclose full database contents (including schema and credential hashes) via an unauthenticated HTTP GET request to /obs/database/obs_db.sql. |
| An authenticated SQL injection vulnerability exists in Cloudlog 2.7.5 and earlier. The vucc_details_ajax function in application/controllers/Awards.php does not properly sanitize the user-supplied Gridsquare POST parameter. This allows a remote, authenticated attacker to execute arbitrary SQL commands by injecting a malicious payload, which is then concatenated directly into a raw SQL query in the vucc_qso_details function. |
| SysAid On-Prem versions <= 23.3.40 are vulnerable to an unauthenticated XML External Entity (XXE) vulnerability in the Checkin processing functionality, allowing for administrator account takeover and file read primitives. |
| SysAid On-Prem versions <= 23.3.40 are vulnerable to an unauthenticated XML External Entity (XXE) vulnerability in the Server URL processing functionality, allowing for administrator account takeover and file read primitives. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: cpu_ops_sbi: Use static array for boot_data
Since commit 6b9f29b81b15 ("riscv: Enable pcpu page first chunk
allocator"), if NUMA is enabled, the page percpu allocator may be used
on very sparse configurations, or when requested on boot with
percpu_alloc=page.
In that case, percpu data gets put in the vmalloc area. However,
sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data,
and simply assumes that __pa() would work. This causes the just started
hart to immediately access an invalid address and hang.
Fortunately, struct sbi_hart_boot_data is not too large, so we can
simply allocate an array for boot_data statically, putting it in the
kernel image.
This fixes NUMA=y SMP boot on Sophgo SG2042.
To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then
run with:
qemu-system-riscv64 -M virt -smp 2 -nographic \
-kernel arch/riscv/boot/Image \
-append "percpu_alloc=page"
Kernel output:
[ 0.000000] Booting Linux on hartid 0
[ 0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025
...
[ 0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712
...
[ 0.083192] smp: Bringing up secondary CPUs ...
[ 0.086722] ------------[ cut here ]------------
[ 0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080)
[ 0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8
[ 0.088376] Modules linked in:
[ 0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE
[ 0.088833] Hardware name: riscv-virtio,qemu (DT)
[ 0.088948] epc : __virt_to_phys+0xae/0xe8
[ 0.089001] ra : __virt_to_phys+0xae/0xe8
[ 0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0
[ 0.089057] gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976
[ 0.089076] t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0
[ 0.089095] s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000
[ 0.089113] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
[ 0.089131] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000
[ 0.089155] s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001
[ 0.089174] s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec
[ 0.089193] s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000
[ 0.089211] s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7
[ 0.089960] t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8
[ 0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003
[ 0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8
[ 0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8
[ 0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c
[ 0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258
[ 0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c
[ 0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc
[ 0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244
[ 0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90
[ 0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118
[ 0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8
[ 0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4
[ 0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c
[ 0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0
[ 0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18
[ 0.090560] ---[ end trace 0000000000000000 ]---
[ 1.179875] CPU1: failed to come online
[ 1.190324] smp: Brought up 1 node, 1 CPU |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: return 0 size for RSS key if not supported
Returning -EOPNOTSUPP from function returning u32 is leading to
cast and invalid size value as a result.
-EOPNOTSUPP as a size probably will lead to allocation fail.
Command: ethtool -x eth0
It is visible on all devices that don't have RSS caps set.
[ 136.615917] Call Trace:
[ 136.615921] <TASK>
[ 136.615927] ? __warn+0x89/0x130
[ 136.615942] ? __alloc_frozen_pages_noprof+0x322/0x330
[ 136.615953] ? report_bug+0x164/0x190
[ 136.615968] ? handle_bug+0x58/0x90
[ 136.615979] ? exc_invalid_op+0x17/0x70
[ 136.615987] ? asm_exc_invalid_op+0x1a/0x20
[ 136.616001] ? rss_prepare_get.constprop.0+0xb9/0x170
[ 136.616016] ? __alloc_frozen_pages_noprof+0x322/0x330
[ 136.616028] __alloc_pages_noprof+0xe/0x20
[ 136.616038] ___kmalloc_large_node+0x80/0x110
[ 136.616072] __kmalloc_large_node_noprof+0x1d/0xa0
[ 136.616081] __kmalloc_noprof+0x32c/0x4c0
[ 136.616098] ? rss_prepare_get.constprop.0+0xb9/0x170
[ 136.616105] rss_prepare_get.constprop.0+0xb9/0x170
[ 136.616114] ethnl_default_doit+0x107/0x3d0
[ 136.616131] genl_family_rcv_msg_doit+0x100/0x160
[ 136.616147] genl_rcv_msg+0x1b8/0x2c0
[ 136.616156] ? __pfx_ethnl_default_doit+0x10/0x10
[ 136.616168] ? __pfx_genl_rcv_msg+0x10/0x10
[ 136.616176] netlink_rcv_skb+0x58/0x110
[ 136.616186] genl_rcv+0x28/0x40
[ 136.616195] netlink_unicast+0x19b/0x290
[ 136.616206] netlink_sendmsg+0x222/0x490
[ 136.616215] __sys_sendto+0x1fd/0x210
[ 136.616233] __x64_sys_sendto+0x24/0x30
[ 136.616242] do_syscall_64+0x82/0x160
[ 136.616252] ? __sys_recvmsg+0x83/0xe0
[ 136.616265] ? syscall_exit_to_user_mode+0x10/0x210
[ 136.616275] ? do_syscall_64+0x8e/0x160
[ 136.616282] ? __count_memcg_events+0xa1/0x130
[ 136.616295] ? count_memcg_events.constprop.0+0x1a/0x30
[ 136.616306] ? handle_mm_fault+0xae/0x2d0
[ 136.616319] ? do_user_addr_fault+0x379/0x670
[ 136.616328] ? clear_bhb_loop+0x45/0xa0
[ 136.616340] ? clear_bhb_loop+0x45/0xa0
[ 136.616349] ? clear_bhb_loop+0x45/0xa0
[ 136.616359] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 136.616369] RIP: 0033:0x7fd30ba7b047
[ 136.616376] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d bd d5 0c 00 00 41 89 ca 74 10 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 71 c3 55 48 83 ec 30 44 89 4c 24 2c 4c 89 44
[ 136.616381] RSP: 002b:00007ffde1796d68 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
[ 136.616388] RAX: ffffffffffffffda RBX: 000055d7bd89f2a0 RCX: 00007fd30ba7b047
[ 136.616392] RDX: 0000000000000028 RSI: 000055d7bd89f3b0 RDI: 0000000000000003
[ 136.616396] RBP: 00007ffde1796e10 R08: 00007fd30bb4e200 R09: 000000000000000c
[ 136.616399] R10: 0000000000000000 R11: 0000000000000202 R12: 000055d7bd89f340
[ 136.616403] R13: 000055d7bd89f3b0 R14: 000055d78943f200 R15: 0000000000000000 |
| In the Linux kernel, the following vulnerability has been resolved:
net: netpoll: Initialize UDP checksum field before checksumming
commit f1fce08e63fe ("netpoll: Eliminate redundant assignment") removed
the initialization of the UDP checksum, which was wrong and broke
netpoll IPv6 transmission due to bad checksumming.
udph->check needs to be set before calling csum_ipv6_magic(). |
| In the Linux kernel, the following vulnerability has been resolved:
block: reject bs > ps block devices when THP is disabled
If THP is disabled and when a block device with logical block size >
page size is present, the following null ptr deref panic happens during
boot:
[ [13.2 mK AOSAN: null-ptr-deref in range [0x0000000000000000-0x0000000000K0 0 0[07]
[ 13.017749] RIP: 0010:create_empty_buffers+0x3b/0x380
<snip>
[ 13.025448] Call Trace:
[ 13.025692] <TASK>
[ 13.025895] block_read_full_folio+0x610/0x780
[ 13.026379] ? __pfx_blkdev_get_block+0x10/0x10
[ 13.027008] ? __folio_batch_add_and_move+0x1fa/0x2b0
[ 13.027548] ? __pfx_blkdev_read_folio+0x10/0x10
[ 13.028080] filemap_read_folio+0x9b/0x200
[ 13.028526] ? __pfx_filemap_read_folio+0x10/0x10
[ 13.029030] ? __filemap_get_folio+0x43/0x620
[ 13.029497] do_read_cache_folio+0x155/0x3b0
[ 13.029962] ? __pfx_blkdev_read_folio+0x10/0x10
[ 13.030381] read_part_sector+0xb7/0x2a0
[ 13.030805] read_lba+0x174/0x2c0
<snip>
[ 13.045348] nvme_scan_ns+0x684/0x850 [nvme_core]
[ 13.045858] ? __pfx_nvme_scan_ns+0x10/0x10 [nvme_core]
[ 13.046414] ? _raw_spin_unlock+0x15/0x40
[ 13.046843] ? __switch_to+0x523/0x10a0
[ 13.047253] ? kvm_clock_get_cycles+0x14/0x30
[ 13.047742] ? __pfx_nvme_scan_ns_async+0x10/0x10 [nvme_core]
[ 13.048353] async_run_entry_fn+0x96/0x4f0
[ 13.048787] process_one_work+0x667/0x10a0
[ 13.049219] worker_thread+0x63c/0xf60
As large folio support depends on THP, only allow bs > ps block devices
if THP is enabled. |
