| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mlxbf_gige: call request_irq() after NAPI initialized
The mlxbf_gige driver encounters a NULL pointer exception in
mlxbf_gige_open() when kdump is enabled. The sequence to reproduce
the exception is as follows:
a) enable kdump
b) trigger kdump via "echo c > /proc/sysrq-trigger"
c) kdump kernel executes
d) kdump kernel loads mlxbf_gige module
e) the mlxbf_gige module runs its open() as the
the "oob_net0" interface is brought up
f) mlxbf_gige module will experience an exception
during its open(), something like:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000086000004
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e29a4000
[0000000000000000] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000086000004 [#1] SMP
CPU: 0 PID: 812 Comm: NetworkManager Tainted: G OE 5.15.0-1035-bluefield #37-Ubuntu
Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.6.0.13024 Jan 19 2024
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : 0x0
lr : __napi_poll+0x40/0x230
sp : ffff800008003e00
x29: ffff800008003e00 x28: 0000000000000000 x27: 00000000ffffffff
x26: ffff000066027238 x25: ffff00007cedec00 x24: ffff800008003ec8
x23: 000000000000012c x22: ffff800008003eb7 x21: 0000000000000000
x20: 0000000000000001 x19: ffff000066027238 x18: 0000000000000000
x17: ffff578fcb450000 x16: ffffa870b083c7c0 x15: 0000aaab010441d0
x14: 0000000000000001 x13: 00726f7272655f65 x12: 6769675f6662786c
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa870b0842398
x8 : 0000000000000004 x7 : fe5a48b9069706ea x6 : 17fdb11fc84ae0d2
x5 : d94a82549d594f35 x4 : 0000000000000000 x3 : 0000000000400100
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000066027238
Call trace:
0x0
net_rx_action+0x178/0x360
__do_softirq+0x15c/0x428
__irq_exit_rcu+0xac/0xec
irq_exit+0x18/0x2c
handle_domain_irq+0x6c/0xa0
gic_handle_irq+0xec/0x1b0
call_on_irq_stack+0x20/0x2c
do_interrupt_handler+0x5c/0x70
el1_interrupt+0x30/0x50
el1h_64_irq_handler+0x18/0x2c
el1h_64_irq+0x7c/0x80
__setup_irq+0x4c0/0x950
request_threaded_irq+0xf4/0x1bc
mlxbf_gige_request_irqs+0x68/0x110 [mlxbf_gige]
mlxbf_gige_open+0x5c/0x170 [mlxbf_gige]
__dev_open+0x100/0x220
__dev_change_flags+0x16c/0x1f0
dev_change_flags+0x2c/0x70
do_setlink+0x220/0xa40
__rtnl_newlink+0x56c/0x8a0
rtnl_newlink+0x58/0x84
rtnetlink_rcv_msg+0x138/0x3c4
netlink_rcv_skb+0x64/0x130
rtnetlink_rcv+0x20/0x30
netlink_unicast+0x2ec/0x360
netlink_sendmsg+0x278/0x490
__sock_sendmsg+0x5c/0x6c
____sys_sendmsg+0x290/0x2d4
___sys_sendmsg+0x84/0xd0
__sys_sendmsg+0x70/0xd0
__arm64_sys_sendmsg+0x2c/0x40
invoke_syscall+0x78/0x100
el0_svc_common.constprop.0+0x54/0x184
do_el0_svc+0x30/0xac
el0_svc+0x48/0x160
el0t_64_sync_handler+0xa4/0x12c
el0t_64_sync+0x1a4/0x1a8
Code: bad PC value
---[ end trace 7d1c3f3bf9d81885 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
Kernel Offset: 0x2870a7a00000 from 0xffff800008000000
PHYS_OFFSET: 0x80000000
CPU features: 0x0,000005c1,a3332a5a
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
The exception happens because there is a pending RX interrupt before the
call to request_irq(RX IRQ) executes. Then, the RX IRQ handler fires
immediately after this request_irq() completes. The
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: avoid dereference of garbage after mount failure
In case kern_mount() fails and returns an error pointer return in the
error branch instead of continuing and dereferencing the error pointer.
While on it drop the never read static variable selinuxfs_mount. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: prevent BPF accessing lowat from a subflow socket.
Alexei reported the following splat:
WARNING: CPU: 32 PID: 3276 at net/mptcp/subflow.c:1430 subflow_data_ready+0x147/0x1c0
Modules linked in: dummy bpf_testmod(O) [last unloaded: bpf_test_no_cfi(O)]
CPU: 32 PID: 3276 Comm: test_progs Tainted: GO 6.8.0-12873-g2c43c33bfd23
Call Trace:
<TASK>
mptcp_set_rcvlowat+0x79/0x1d0
sk_setsockopt+0x6c0/0x1540
__bpf_setsockopt+0x6f/0x90
bpf_sock_ops_setsockopt+0x3c/0x90
bpf_prog_509ce5db2c7f9981_bpf_test_sockopt_int+0xb4/0x11b
bpf_prog_dce07e362d941d2b_bpf_test_socket_sockopt+0x12b/0x132
bpf_prog_348c9b5faaf10092_skops_sockopt+0x954/0xe86
__cgroup_bpf_run_filter_sock_ops+0xbc/0x250
tcp_connect+0x879/0x1160
tcp_v6_connect+0x50c/0x870
mptcp_connect+0x129/0x280
__inet_stream_connect+0xce/0x370
inet_stream_connect+0x36/0x50
bpf_trampoline_6442491565+0x49/0xef
inet_stream_connect+0x5/0x50
__sys_connect+0x63/0x90
__x64_sys_connect+0x14/0x20
The root cause of the issue is that bpf allows accessing mptcp-level
proto_ops from a tcp subflow scope.
Fix the issue detecting the problematic call and preventing any action. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxbf_gige: stop interface during shutdown
The mlxbf_gige driver intermittantly encounters a NULL pointer
exception while the system is shutting down via "reboot" command.
The mlxbf_driver will experience an exception right after executing
its shutdown() method. One example of this exception is:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000011d373000
[0000000000000070] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
CPU: 0 PID: 13 Comm: ksoftirqd/0 Tainted: G S OE 5.15.0-bf.6.gef6992a #1
Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.0.2.12669 Apr 21 2023
pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige]
lr : mlxbf_gige_poll+0x54/0x160 [mlxbf_gige]
sp : ffff8000080d3c10
x29: ffff8000080d3c10 x28: ffffcce72cbb7000 x27: ffff8000080d3d58
x26: ffff0000814e7340 x25: ffff331cd1a05000 x24: ffffcce72c4ea008
x23: ffff0000814e4b40 x22: ffff0000814e4d10 x21: ffff0000814e4128
x20: 0000000000000000 x19: ffff0000814e4a80 x18: ffffffffffffffff
x17: 000000000000001c x16: ffffcce72b4553f4 x15: ffff80008805b8a7
x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101
x11: 7f7f7f7f7f7f7f7f x10: c2ac898b17576267 x9 : ffffcce720fa5404
x8 : ffff000080812138 x7 : 0000000000002e9a x6 : 0000000000000080
x5 : ffff00008de3b000 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige]
mlxbf_gige_poll+0x54/0x160 [mlxbf_gige]
__napi_poll+0x40/0x1c8
net_rx_action+0x314/0x3a0
__do_softirq+0x128/0x334
run_ksoftirqd+0x54/0x6c
smpboot_thread_fn+0x14c/0x190
kthread+0x10c/0x110
ret_from_fork+0x10/0x20
Code: 8b070000 f9000ea0 f95056c0 f86178a1 (b9407002)
---[ end trace 7cc3941aa0d8e6a4 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
Kernel Offset: 0x4ce722520000 from 0xffff800008000000
PHYS_OFFSET: 0x80000000
CPU features: 0x000005c1,a3330e5a
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
During system shutdown, the mlxbf_gige driver's shutdown() is always executed.
However, the driver's stop() method will only execute if networking interface
configuration logic within the Linux distribution has been setup to do so.
If shutdown() executes but stop() does not execute, NAPI remains enabled
and this can lead to an exception if NAPI is scheduled while the hardware
interface has only been partially deinitialized.
The networking interface managed by the mlxbf_gige driver must be properly
stopped during system shutdown so that IFF_UP is cleared, the hardware
interface is put into a clean state, and NAPI is fully deinitialized. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe
In function pci1xxxx_spi_probe, there is a potential null pointer that
may be caused by a failed memory allocation by the function devm_kzalloc.
Hence, a null pointer check needs to be added to prevent null pointer
dereferencing later in the code.
To fix this issue, spi_bus->spi_int[iter] should be checked. The memory
allocated by devm_kzalloc will be automatically released, so just directly
return -ENOMEM without worrying about memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix module reference leakage from bdev_open_by_dev error path
At the time bdev_may_open() is called, module reference is grabbed
already, hence module reference should be released if bdev_may_open()
failed.
This problem is found by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_acl_tcam: Fix possible use-after-free during activity update
The rule activity update delayed work periodically traverses the list of
configured rules and queries their activity from the device.
As part of this task it accesses the entry pointed by 'ventry->entry',
but this entry can be changed concurrently by the rehash delayed work,
leading to a use-after-free [1].
Fix by closing the race and perform the activity query under the
'vregion->lock' mutex.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140
Read of size 8 at addr ffff8881054ed808 by task kworker/0:18/181
CPU: 0 PID: 181 Comm: kworker/0:18 Not tainted 6.9.0-rc2-custom-00781-gd5ab772d32f7 #2
Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019
Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xce/0x670
kasan_report+0xd7/0x110
mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140
mlxsw_sp_acl_rule_activity_update_work+0x219/0x400
process_one_work+0x8eb/0x19b0
worker_thread+0x6c9/0xf70
kthread+0x2c9/0x3b0
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 1039:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__kmalloc+0x19c/0x360
mlxsw_sp_acl_tcam_entry_create+0x7b/0x1f0
mlxsw_sp_acl_tcam_vchunk_migrate_all+0x30d/0xb50
mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300
process_one_work+0x8eb/0x19b0
worker_thread+0x6c9/0xf70
kthread+0x2c9/0x3b0
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30
Freed by task 1039:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
poison_slab_object+0x102/0x170
__kasan_slab_free+0x14/0x30
kfree+0xc1/0x290
mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3d7/0xb50
mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300
process_one_work+0x8eb/0x19b0
worker_thread+0x6c9/0xf70
kthread+0x2c9/0x3b0
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_acl_tcam: Fix memory leak during rehash
The rehash delayed work migrates filters from one region to another.
This is done by iterating over all chunks (all the filters with the same
priority) in the region and in each chunk iterating over all the
filters.
If the migration fails, the code tries to migrate the filters back to
the old region. However, the rollback itself can also fail in which case
another migration will be erroneously performed. Besides the fact that
this ping pong is not a very good idea, it also creates a problem.
Each virtual chunk references two chunks: The currently used one
('vchunk->chunk') and a backup ('vchunk->chunk2'). During migration the
first holds the chunk we want to migrate filters to and the second holds
the chunk we are migrating filters from.
The code currently assumes - but does not verify - that the backup chunk
does not exist (NULL) if the currently used chunk does not reference the
target region. This assumption breaks when we are trying to rollback a
rollback, resulting in the backup chunk being overwritten and leaked
[1].
Fix by not rolling back a failed rollback and add a warning to avoid
future cases.
[1]
WARNING: CPU: 5 PID: 1063 at lib/parman.c:291 parman_destroy+0x17/0x20
Modules linked in:
CPU: 5 PID: 1063 Comm: kworker/5:11 Tainted: G W 6.9.0-rc2-custom-00784-gc6a05c468a0b #14
Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:parman_destroy+0x17/0x20
[...]
Call Trace:
<TASK>
mlxsw_sp_acl_atcam_region_fini+0x19/0x60
mlxsw_sp_acl_tcam_region_destroy+0x49/0xf0
mlxsw_sp_acl_tcam_vregion_rehash_work+0x1f1/0x470
process_one_work+0x151/0x370
worker_thread+0x2cb/0x3e0
kthread+0xd0/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_acl_tcam: Fix memory leak when canceling rehash work
The rehash delayed work is rescheduled with a delay if the number of
credits at end of the work is not negative as supposedly it means that
the migration ended. Otherwise, it is rescheduled immediately.
After "mlxsw: spectrum_acl_tcam: Fix possible use-after-free during
rehash" the above is no longer accurate as a non-negative number of
credits is no longer indicative of the migration being done. It can also
happen if the work encountered an error in which case the migration will
resume the next time the work is scheduled.
The significance of the above is that it is possible for the work to be
pending and associated with hints that were allocated when the migration
started. This leads to the hints being leaked [1] when the work is
canceled while pending as part of ACL region dismantle.
Fix by freeing the hints if hints are associated with a work that was
canceled while pending.
Blame the original commit since the reliance on not having a pending
work associated with hints is fragile.
[1]
unreferenced object 0xffff88810e7c3000 (size 256):
comm "kworker/0:16", pid 176, jiffies 4295460353
hex dump (first 32 bytes):
00 30 95 11 81 88 ff ff 61 00 00 00 00 00 00 80 .0......a.......
00 00 61 00 40 00 00 00 00 00 00 00 04 00 00 00 ..a.@...........
backtrace (crc 2544ddb9):
[<00000000cf8cfab3>] kmalloc_trace+0x23f/0x2a0
[<000000004d9a1ad9>] objagg_hints_get+0x42/0x390
[<000000000b143cf3>] mlxsw_sp_acl_erp_rehash_hints_get+0xca/0x400
[<0000000059bdb60a>] mlxsw_sp_acl_tcam_vregion_rehash_work+0x868/0x1160
[<00000000e81fd734>] process_one_work+0x59c/0xf20
[<00000000ceee9e81>] worker_thread+0x799/0x12c0
[<00000000bda6fe39>] kthread+0x246/0x300
[<0000000070056d23>] ret_from_fork+0x34/0x70
[<00000000dea2b93e>] ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: fix NULL-deref on non-serdev suspend
Qualcomm ROME controllers can be registered from the Bluetooth line
discipline and in this case the HCI UART serdev pointer is NULL.
Add the missing sanity check to prevent a NULL-pointer dereference when
wakeup() is called for a non-serdev controller during suspend.
Just return true for now to restore the original behaviour and address
the crash with pre-6.2 kernels, which do not have commit e9b3e5b8c657
("Bluetooth: hci_qca: only assign wakeup with serial port support") that
causes the crash to happen already at setup() time. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: fix NULL-deref on non-serdev setup
Qualcomm ROME controllers can be registered from the Bluetooth line
discipline and in this case the HCI UART serdev pointer is NULL.
Add the missing sanity check to prevent a NULL-pointer dereference when
setup() is called for a non-serdev controller. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Prevent double free on error
The error handling path in its_vpe_irq_domain_alloc() causes a double free
when its_vpe_init() fails after successfully allocating at least one
interrupt. This happens because its_vpe_irq_domain_free() frees the
interrupts along with the area bitmap and the vprop_page and
its_vpe_irq_domain_alloc() subsequently frees the area bitmap and the
vprop_page again.
Fix this by unconditionally invoking its_vpe_irq_domain_free() which
handles all cases correctly and by removing the bitmap/vprop_page freeing
from its_vpe_irq_domain_alloc().
[ tglx: Massaged change log ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm: zswap: fix shrinker NULL crash with cgroup_disable=memory
Christian reports a NULL deref in zswap that he bisected down to the zswap
shrinker. The issue also cropped up in the bug trackers of libguestfs [1]
and the Red Hat bugzilla [2].
The problem is that when memcg is disabled with the boot time flag, the
zswap shrinker might get called with sc->memcg == NULL. This is okay in
many places, like the lruvec operations. But it crashes in
memcg_page_state() - which is only used due to the non-node accounting of
cgroup's the zswap memory to begin with.
Nhat spotted that the memcg can be NULL in the memcg-disabled case, and I
was then able to reproduce the crash locally as well.
[1] https://github.com/libguestfs/libguestfs/issues/139
[2] https://bugzilla.redhat.com/show_bug.cgi?id=2275252 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
This dma_alloc_coherent() is undone neither in the remove function, nor in
the error handling path of fsl_qdma_probe().
Switch to the managed version to fix both issues. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/lima: fix a memleak in lima_heap_alloc
When lima_vm_map_bo fails, the resources need to be deallocated, or
there will be memleaks. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix deadlock while reading mqd from debugfs
An errant disk backup on my desktop got into debugfs and triggered the
following deadlock scenario in the amdgpu debugfs files. The machine
also hard-resets immediately after those lines are printed (although I
wasn't able to reproduce that part when reading by hand):
[ 1318.016074][ T1082] ======================================================
[ 1318.016607][ T1082] WARNING: possible circular locking dependency detected
[ 1318.017107][ T1082] 6.8.0-rc7-00015-ge0c8221b72c0 #17 Not tainted
[ 1318.017598][ T1082] ------------------------------------------------------
[ 1318.018096][ T1082] tar/1082 is trying to acquire lock:
[ 1318.018585][ T1082] ffff98c44175d6a0 (&mm->mmap_lock){++++}-{3:3}, at: __might_fault+0x40/0x80
[ 1318.019084][ T1082]
[ 1318.019084][ T1082] but task is already holding lock:
[ 1318.020052][ T1082] ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu]
[ 1318.020607][ T1082]
[ 1318.020607][ T1082] which lock already depends on the new lock.
[ 1318.020607][ T1082]
[ 1318.022081][ T1082]
[ 1318.022081][ T1082] the existing dependency chain (in reverse order) is:
[ 1318.023083][ T1082]
[ 1318.023083][ T1082] -> #2 (reservation_ww_class_mutex){+.+.}-{3:3}:
[ 1318.024114][ T1082] __ww_mutex_lock.constprop.0+0xe0/0x12f0
[ 1318.024639][ T1082] ww_mutex_lock+0x32/0x90
[ 1318.025161][ T1082] dma_resv_lockdep+0x18a/0x330
[ 1318.025683][ T1082] do_one_initcall+0x6a/0x350
[ 1318.026210][ T1082] kernel_init_freeable+0x1a3/0x310
[ 1318.026728][ T1082] kernel_init+0x15/0x1a0
[ 1318.027242][ T1082] ret_from_fork+0x2c/0x40
[ 1318.027759][ T1082] ret_from_fork_asm+0x11/0x20
[ 1318.028281][ T1082]
[ 1318.028281][ T1082] -> #1 (reservation_ww_class_acquire){+.+.}-{0:0}:
[ 1318.029297][ T1082] dma_resv_lockdep+0x16c/0x330
[ 1318.029790][ T1082] do_one_initcall+0x6a/0x350
[ 1318.030263][ T1082] kernel_init_freeable+0x1a3/0x310
[ 1318.030722][ T1082] kernel_init+0x15/0x1a0
[ 1318.031168][ T1082] ret_from_fork+0x2c/0x40
[ 1318.031598][ T1082] ret_from_fork_asm+0x11/0x20
[ 1318.032011][ T1082]
[ 1318.032011][ T1082] -> #0 (&mm->mmap_lock){++++}-{3:3}:
[ 1318.032778][ T1082] __lock_acquire+0x14bf/0x2680
[ 1318.033141][ T1082] lock_acquire+0xcd/0x2c0
[ 1318.033487][ T1082] __might_fault+0x58/0x80
[ 1318.033814][ T1082] amdgpu_debugfs_mqd_read+0x103/0x250 [amdgpu]
[ 1318.034181][ T1082] full_proxy_read+0x55/0x80
[ 1318.034487][ T1082] vfs_read+0xa7/0x360
[ 1318.034788][ T1082] ksys_read+0x70/0xf0
[ 1318.035085][ T1082] do_syscall_64+0x94/0x180
[ 1318.035375][ T1082] entry_SYSCALL_64_after_hwframe+0x46/0x4e
[ 1318.035664][ T1082]
[ 1318.035664][ T1082] other info that might help us debug this:
[ 1318.035664][ T1082]
[ 1318.036487][ T1082] Chain exists of:
[ 1318.036487][ T1082] &mm->mmap_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex
[ 1318.036487][ T1082]
[ 1318.037310][ T1082] Possible unsafe locking scenario:
[ 1318.037310][ T1082]
[ 1318.037838][ T1082] CPU0 CPU1
[ 1318.038101][ T1082] ---- ----
[ 1318.038350][ T1082] lock(reservation_ww_class_mutex);
[ 1318.038590][ T1082] lock(reservation_ww_class_acquire);
[ 1318.038839][ T1082] lock(reservation_ww_class_mutex);
[ 1318.039083][ T1082] rlock(&mm->mmap_lock);
[ 1318.039328][ T1082]
[ 1318.039328][ T1082] *** DEADLOCK ***
[ 1318.039328][ T1082]
[ 1318.040029][ T1082] 1 lock held by tar/1082:
[ 1318.040259][ T1082] #0: ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu]
[ 1318.040560][ T1082]
[ 1318.040560][ T1082] stack backtrace:
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix stale locked mutex in nouveau_gem_ioctl_pushbuf
If VM_BIND is enabled on the client the legacy submission ioctl can't be
used, however if a client tries to do so regardless it will return an
error. In this case the clients mutex remained unlocked leading to a
deadlock inside nouveau_drm_postclose or any other nouveau ioctl call. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: region: add owner module and take its refcount
The current implementation of the fpga region assumes that the low-level
module registers a driver for the parent device and uses its owner pointer
to take the module's refcount. This approach is problematic since it can
lead to a null pointer dereference while attempting to get the region
during programming if the parent device does not have a driver.
To address this problem, add a module owner pointer to the fpga_region
struct and use it to take the module's refcount. Modify the functions for
registering a region to take an additional owner module parameter and
rename them to avoid conflicts. Use the old function names for helper
macros that automatically set the module that registers the region as the
owner. This ensures compatibility with existing low-level control modules
and reduces the chances of registering a region without setting the owner.
Also, update the documentation to keep it consistent with the new interface
for registering an fpga region. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: of_property: Return error for int_map allocation failure
Return -ENOMEM from of_pci_prop_intr_map() if kcalloc() fails to prevent a
NULL pointer dereference in this case.
[bhelgaas: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe()
'clk_data' is allocated with mtk_devm_alloc_clk_data(). So calling
mtk_free_clk_data() explicitly in the remove function would lead to a
double-free.
Remove the redundant call. |
