| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: PAC1934: fix accessing out of bounds array index
Fix accessing out of bounds array index for average
current and voltage measurements. The device itself has
only 4 channels, but in sysfs there are "fake"
channels for the average voltages and currents too. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger
When the cpu5wdt module is removing, the origin code uses del_timer() to
de-activate the timer. If the timer handler is running, del_timer() could
not stop it and will return directly. If the port region is released by
release_region() and then the timer handler cpu5wdt_trigger() calls outb()
to write into the region that is released, the use-after-free bug will
happen.
Change del_timer() to timer_shutdown_sync() in order that the timer handler
could be finished before the port region is released. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Check 'folio' pointer for NULL
It can be NULL if bmap is called. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: carl9170: re-fix fortified-memset warning
The carl9170_tx_release() function sometimes triggers a fortified-memset
warning in my randconfig builds:
In file included from include/linux/string.h:254,
from drivers/net/wireless/ath/carl9170/tx.c:40:
In function 'fortify_memset_chk',
inlined from 'carl9170_tx_release' at drivers/net/wireless/ath/carl9170/tx.c:283:2,
inlined from 'kref_put' at include/linux/kref.h:65:3,
inlined from 'carl9170_tx_put_skb' at drivers/net/wireless/ath/carl9170/tx.c:342:9:
include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
493 | __write_overflow_field(p_size_field, size);
Kees previously tried to avoid this by using memset_after(), but it seems
this does not fully address the problem. I noticed that the memset_after()
here is done on a different part of the union (status) than the original
cast was from (rate_driver_data), which may confuse the compiler.
Unfortunately, the memset_after() trick does not work on driver_rates[]
because that is part of an anonymous struct, and I could not get
struct_group() to do this either. Using two separate memset() calls
on the two members does address the warning though. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: connac: check for null before dereferencing
The wcid can be NULL. It should be checked for validity before
dereferencing it to avoid crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix netif state handling
mlx5e_suspend cleans resources only if netif_device_present() returns
true. However, mlx5e_resume changes the state of netif, via
mlx5e_nic_enable, only if reg_state == NETREG_REGISTERED.
In the below case, the above leads to NULL-ptr Oops[1] and memory
leaks:
mlx5e_probe
_mlx5e_resume
mlx5e_attach_netdev
mlx5e_nic_enable <-- netdev not reg, not calling netif_device_attach()
register_netdev <-- failed for some reason.
ERROR_FLOW:
_mlx5e_suspend <-- netif_device_present return false, resources aren't freed :(
Hence, clean resources in this case as well.
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0010 [#1] SMP
CPU: 2 PID: 9345 Comm: test-ovs-ct-gen Not tainted 6.5.0_for_upstream_min_debug_2023_09_05_16_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:0x0
Code: Unable to access opcode bytes at0xffffffffffffffd6.
RSP: 0018:ffff888178aaf758 EFLAGS: 00010246
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x14c/0x3c0
? exc_page_fault+0x75/0x140
? asm_exc_page_fault+0x22/0x30
notifier_call_chain+0x35/0xb0
blocking_notifier_call_chain+0x3d/0x60
mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core]
mlx5_core_uplink_netdev_event_replay+0x3e/0x60 [mlx5_core]
mlx5_mdev_netdev_track+0x53/0x60 [mlx5_ib]
mlx5_ib_roce_init+0xc3/0x340 [mlx5_ib]
__mlx5_ib_add+0x34/0xd0 [mlx5_ib]
mlx5r_probe+0xe1/0x210 [mlx5_ib]
? auxiliary_match_id+0x6a/0x90
auxiliary_bus_probe+0x38/0x80
? driver_sysfs_add+0x51/0x80
really_probe+0xc9/0x3e0
? driver_probe_device+0x90/0x90
__driver_probe_device+0x80/0x160
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
bus_for_each_drv+0x80/0xd0
__device_attach+0xbc/0x1f0
bus_probe_device+0x86/0xa0
device_add+0x637/0x840
__auxiliary_device_add+0x3b/0xa0
add_adev+0xc9/0x140 [mlx5_core]
mlx5_rescan_drivers_locked+0x22a/0x310 [mlx5_core]
mlx5_register_device+0x53/0xa0 [mlx5_core]
mlx5_init_one_devl_locked+0x5c4/0x9c0 [mlx5_core]
mlx5_init_one+0x3b/0x60 [mlx5_core]
probe_one+0x44c/0x730 [mlx5_core]
local_pci_probe+0x3e/0x90
pci_device_probe+0xbf/0x210
? kernfs_create_link+0x5d/0xa0
? sysfs_do_create_link_sd+0x60/0xc0
really_probe+0xc9/0x3e0
? driver_probe_device+0x90/0x90
__driver_probe_device+0x80/0x160
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
bus_for_each_drv+0x80/0xd0
__device_attach+0xbc/0x1f0
pci_bus_add_device+0x54/0x80
pci_iov_add_virtfn+0x2e6/0x320
sriov_enable+0x208/0x420
mlx5_core_sriov_configure+0x9e/0x200 [mlx5_core]
sriov_numvfs_store+0xae/0x1a0
kernfs_fop_write_iter+0x10c/0x1a0
vfs_write+0x291/0x3c0
ksys_write+0x5f/0xe0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
CR2: 0000000000000000
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - validate slices count returned by FW
The function adf_send_admin_tl_start() enables the telemetry (TL)
feature on a QAT device by sending the ICP_QAT_FW_TL_START message to
the firmware. This triggers the FW to start writing TL data to a DMA
buffer in memory and returns an array containing the number of
accelerators of each type (slices) supported by this HW.
The pointer to this array is stored in the adf_tl_hw_data data
structure called slice_cnt.
The array slice_cnt is then used in the function tl_print_dev_data()
to report in debugfs only statistics about the supported accelerators.
An incorrect value of the elements in slice_cnt might lead to an out
of bounds memory read.
At the moment, there isn't an implementation of FW that returns a wrong
value, but for robustness validate the slice count array returned by FW. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset()
pci_alloc_irq_vectors() allocates an irq vector. When devm_add_action()
fails, the irq vector is not freed, which leads to a memory leak.
Replace the devm_add_action with devm_add_action_or_reset to ensure
the irq vector can be destroyed when it fails. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: sungem: remove .ndo_poll_controller to avoid deadlocks
Erhard reports netpoll warnings from sungem:
netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll (gem_start_xmit+0x0/0x398)
WARNING: CPU: 1 PID: 1 at net/core/netpoll.c:370 netpoll_send_skb+0x1fc/0x20c
gem_poll_controller() disables interrupts, which may sleep.
We can't sleep in netpoll, it has interrupts disabled completely.
Strangely, gem_poll_controller() doesn't even poll the completions,
and instead acts as if an interrupt has fired so it just schedules
NAPI and exits. None of this has been necessary for years, since
netpoll invokes NAPI directly. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
In the prueth_probe() function, if one of the calls to emac_phy_connect()
fails due to of_phy_connect() returning NULL, then the subsequent call to
phy_attached_info() will dereference a NULL pointer.
Check the return code of emac_phy_connect and fail cleanly if there is an
error. |
| In the Linux kernel, the following vulnerability has been resolved:
libbpf: Prevent null-pointer dereference when prog to load has no BTF
In bpf_objec_load_prog(), there's no guarantee that obj->btf is non-NULL
when passing it to btf__fd(), and this function does not perform any
check before dereferencing its argument (as bpf_object__btf_fd() used to
do). As a consequence, we get segmentation fault errors in bpftool (for
example) when trying to load programs that come without BTF information.
v2: Keep btf__fd() in the fix instead of reverting to bpf_object__btf_fd(). |
| In the Linux kernel, the following vulnerability has been resolved:
cppc_cpufreq: Fix possible null pointer dereference
cppc_cpufreq_get_rate() and hisi_cppc_cpufreq_get_rate() can be called from
different places with various parameters. So cpufreq_cpu_get() can return
null as 'policy' in some circumstances.
Fix this bug by adding null return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/tsens: Fix null pointer dereference
compute_intercept_slope() is called from calibrate_8960() (in tsens-8960.c)
as compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB) which lead to null
pointer dereference (if DEBUG or DYNAMIC_DEBUG set).
Fix this bug by adding null pointer check.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group
The perf tool allows users to create event groups through following
cmd [1], but the driver does not check whether the array index is out of
bounds when writing data to the event_group array. If the number of events
in an event_group is greater than HISI_PCIE_MAX_COUNTERS, the memory write
overflow of event_group array occurs.
Add array index check to fix the possible array out of bounds violation,
and return directly when write new events are written to array bounds.
There are 9 different events in an event_group.
[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}' |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group
The perf tool allows users to create event groups through following
cmd [1], but the driver does not check whether the array index is out
of bounds when writing data to the event_group array. If the number of
events in an event_group is greater than HNS3_PMU_MAX_HW_EVENTS, the
memory write overflow of event_group array occurs.
Add array index check to fix the possible array out of bounds violation,
and return directly when write new events are written to array bounds.
There are 9 different events in an event_group.
[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/} |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix potential memory leakage when reading chip temperature
Without this commit, reading chip temperature will cause memory leakage. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: Avoid address calculations via out of bounds array indexing
Before request->channels[] can be used, request->n_channels must be set.
Additionally, address calculations for memory after the "channels" array
need to be calculated from the allocation base ("request") rather than
via the first "out of bounds" index of "channels", otherwise run-time
bounds checking will throw a warning. |
| In the Linux kernel, the following vulnerability has been resolved:
kunit: Fix kthread reference
There is a race condition when a kthread finishes after the deadline and
before the call to kthread_stop(), which may lead to use after free. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Reload only IB representors upon lag disable/enable
On lag disable, the bond IB device along with all of its
representors are destroyed, and then the slaves' representors get reloaded.
In case the slave IB representor load fails, the eswitch error flow
unloads all representors, including ethernet representors, where the
netdevs get detached and removed from lag bond. Such flow is inaccurate
as the lag driver is not responsible for loading/unloading ethernet
representors. Furthermore, the flow described above begins by holding
lag lock to prevent bond changes during disable flow. However, when
reaching the ethernet representors detachment from lag, the lag lock is
required again, triggering the following deadlock:
Call trace:
__switch_to+0xf4/0x148
__schedule+0x2c8/0x7d0
schedule+0x50/0xe0
schedule_preempt_disabled+0x18/0x28
__mutex_lock.isra.13+0x2b8/0x570
__mutex_lock_slowpath+0x1c/0x28
mutex_lock+0x4c/0x68
mlx5_lag_remove_netdev+0x3c/0x1a0 [mlx5_core]
mlx5e_uplink_rep_disable+0x70/0xa0 [mlx5_core]
mlx5e_detach_netdev+0x6c/0xb0 [mlx5_core]
mlx5e_netdev_change_profile+0x44/0x138 [mlx5_core]
mlx5e_netdev_attach_nic_profile+0x28/0x38 [mlx5_core]
mlx5e_vport_rep_unload+0x184/0x1b8 [mlx5_core]
mlx5_esw_offloads_rep_load+0xd8/0xe0 [mlx5_core]
mlx5_eswitch_reload_reps+0x74/0xd0 [mlx5_core]
mlx5_disable_lag+0x130/0x138 [mlx5_core]
mlx5_lag_disable_change+0x6c/0x70 [mlx5_core] // hold ldev->lock
mlx5_devlink_eswitch_mode_set+0xc0/0x410 [mlx5_core]
devlink_nl_cmd_eswitch_set_doit+0xdc/0x180
genl_family_rcv_msg_doit.isra.17+0xe8/0x138
genl_rcv_msg+0xe4/0x220
netlink_rcv_skb+0x44/0x108
genl_rcv+0x40/0x58
netlink_unicast+0x198/0x268
netlink_sendmsg+0x1d4/0x418
sock_sendmsg+0x54/0x60
__sys_sendto+0xf4/0x120
__arm64_sys_sendto+0x30/0x40
el0_svc_common+0x8c/0x120
do_el0_svc+0x30/0xa0
el0_svc+0x20/0x30
el0_sync_handler+0x90/0xb8
el0_sync+0x160/0x180
Thus, upon lag enable/disable, load and unload only the IB representors
of the slaves preventing the deadlock mentioned above.
While at it, refactor the mlx5_esw_offloads_rep_load() function to have
a static helper method for its internal logic, in symmetry with the
representor unload design. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: Assign dummy when codec not specified for a DAI link
MediaTek sound card drivers are checking whether a DAI link is present
and used on a board to assign the correct parameters and this is done
by checking the codec DAI names at probe time.
If no real codec is present, assign the dummy codec to the DAI link
to avoid NULL pointer during string comparison. |
