Export limit exceeded: 374968 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (47463 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49570 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: gpio-xilinx: Fix integer overflow Current implementation is not able to configure more than 32 pins due to incorrect data type. So type casting with unsigned long to avoid it. | ||||
| CVE-2022-49551 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: isp1760: Fix out-of-bounds array access Running the driver through kasan gives an interesting splat: BUG: KASAN: global-out-of-bounds in isp1760_register+0x180/0x70c Read of size 20 at addr f1db2e64 by task swapper/0/1 (...) isp1760_register from isp1760_plat_probe+0x1d8/0x220 (...) This happens because the loop reading the regmap fields for the different ISP1760 variants look like this: for (i = 0; i < HC_FIELD_MAX; i++) { ... } Meaning it expects the arrays to be at least HC_FIELD_MAX - 1 long. However the arrays isp1760_hc_reg_fields[], isp1763_hc_reg_fields[], isp1763_hc_volatile_ranges[] and isp1763_dc_volatile_ranges[] are dynamically sized during compilation. Fix this by putting an empty assignment to the [HC_FIELD_MAX] and [DC_FIELD_MAX] array member at the end of each array. This will make the array one member longer than it needs to be, but avoids the risk of overwriting whatever is inside [HC_FIELD_MAX - 1] and is simple and intuitive to read. Also add comments explaining what is going on. | ||||
| CVE-2022-49548 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix potential array overflow in bpf_trampoline_get_progs() The cnt value in the 'cnt >= BPF_MAX_TRAMP_PROGS' check does not include BPF_TRAMP_MODIFY_RETURN bpf programs, so the number of the attached BPF_TRAMP_MODIFY_RETURN bpf programs in a trampoline can exceed BPF_MAX_TRAMP_PROGS. When this happens, the assignment '*progs++ = aux->prog' in bpf_trampoline_get_progs() will cause progs array overflow as the progs field in the bpf_tramp_progs struct can only hold at most BPF_MAX_TRAMP_PROGS bpf programs. | ||||
| CVE-2022-49478 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix array-index-out-of-bounds in pvr2_i2c_core_init Syzbot reported that -1 is used as array index. The problem was in missing validation check. hdw->unit_number is initialized with -1 and then if init table walk fails this value remains unchanged. Since code blindly uses this member for array indexing adding sanity check is the easiest fix for that. hdw->workpoll initialization moved upper to prevent warning in __flush_work. | ||||
| CVE-2022-49387 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: rzg2l_wdt: Fix 32bit overflow issue The value of timer_cycle_us can be 0 due to 32bit overflow. For eg:- If we assign the counter value "0xfff" for computing maxval. This patch fixes this issue by appending ULL to 1024, so that it is promoted to 64bit. This patch also fixes the warning message, 'watchdog: Invalid min and max timeout values, resetting to 0!'. | ||||
| CVE-2022-49368 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry() The "fsp->location" variable comes from user via ethtool_get_rxnfc(). Check that it is valid to prevent an out of bounds read. | ||||
| CVE-2022-49365 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Off by one in dm_dmub_outbox1_low_irq() The > ARRAY_SIZE() should be >= ARRAY_SIZE() to prevent an out of bounds access. | ||||
| CVE-2022-49218 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/dp: Fix OOB read when handling Post Cursor2 register The link_status array was not large enough to read the Adjust Request Post Cursor2 register, so remove the common helper function to avoid an OOB read, found with a -Warray-bounds build: drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_get_adjust_request_post_cursor': drivers/gpu/drm/drm_dp_helper.c:59:27: error: array subscript 10 is outside array bounds of 'const u8[6]' {aka 'const unsigned char[6]'} [-Werror=array-bounds] 59 | return link_status[r - DP_LANE0_1_STATUS]; | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/drm_dp_helper.c:147:51: note: while referencing 'link_status' 147 | u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZE], | ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Replace the only user of the helper with an open-coded fetch and decode, similar to drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c. | ||||
| CVE-2022-49208 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Prevent some integer underflows My static checker complains that: drivers/infiniband/hw/irdma/ctrl.c:3605 irdma_sc_ceq_init() warn: can subtract underflow 'info->dev->hmc_fpm_misc.max_ceqs'? It appears that "info->dev->hmc_fpm_misc.max_ceqs" comes from the firmware in irdma_sc_parse_fpm_query_buf() so, yes, there is a chance that it could be zero. Even if we trust the firmware, it's easy enough to change the condition just as a hardenning measure. | ||||
| CVE-2022-49186 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: clk: visconti: prevent array overflow in visconti_clk_register_gates() This code was using -1 to represent that there was no reset function. Unfortunately, the -1 was stored in u8 so the if (clks[i].rs_id >= 0) condition was always true. This lead to an out of bounds access in visconti_clk_register_gates(). | ||||
| CVE-2021-47636 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock() Function ubifs_wbuf_write_nolock() may access buf out of bounds in following process: ubifs_wbuf_write_nolock(): aligned_len = ALIGN(len, 8); // Assume len = 4089, aligned_len = 4096 if (aligned_len <= wbuf->avail) ... // Not satisfy if (wbuf->used) { ubifs_leb_write() // Fill some data in avail wbuf len -= wbuf->avail; // len is still not 8-bytes aligned aligned_len -= wbuf->avail; } n = aligned_len >> c->max_write_shift; if (n) { n <<= c->max_write_shift; err = ubifs_leb_write(c, wbuf->lnum, buf + written, wbuf->offs, n); // n > len, read out of bounds less than 8(n-len) bytes } , which can be catched by KASAN: ========================================================= BUG: KASAN: slab-out-of-bounds in ecc_sw_hamming_calculate+0x1dc/0x7d0 Read of size 4 at addr ffff888105594ff8 by task kworker/u8:4/128 Workqueue: writeback wb_workfn (flush-ubifs_0_0) Call Trace: kasan_report.cold+0x81/0x165 nand_write_page_swecc+0xa9/0x160 ubifs_leb_write+0xf2/0x1b0 [ubifs] ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs] write_head+0xdc/0x1c0 [ubifs] ubifs_jnl_write_inode+0x627/0x960 [ubifs] wb_workfn+0x8af/0xb80 Function ubifs_wbuf_write_nolock() accepts that parameter 'len' is not 8 bytes aligned, the 'len' represents the true length of buf (which is allocated in 'ubifs_jnl_xxx', eg. ubifs_jnl_write_inode), so ubifs_wbuf_write_nolock() must handle the length read from 'buf' carefully to write leb safely. Fetch a reproducer in [Link]. | ||||
| CVE-2025-51281 | 2 D-link, Dlink | 3 Di-8100, Di-8100, Di-8100 Firmware | 2025-10-01 | 7 High |
| D-Link DI-8100 16.07.26A1 is vulnerable to Buffer Overflow via the en`, `val and id parameters in the qj_asp function. This vulnerability allows authenticated attackers to cause a Denial of Service (DoS) by sending crafted GET requests with overly long values for these parameters. | ||||
| CVE-2025-6566 | 1 Oatpp | 1 Oat\+\+ | 2025-10-01 | 5.3 Medium |
| A vulnerability was found in oatpp Oat++ up to 1.3.1. It has been declared as critical. This vulnerability affects the function deserializeArray of the file src/oatpp/json/Deserializer.cpp. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-46417 | 1 Mmaitre314 | 1 Picklescan | 2025-10-01 | 7.5 High |
| The unsafe globals in Picklescan before 0.0.25 do not include ssl. Consequently, ssl.get_server_certificate can exfiltrate data via DNS after deserialization. | ||||
| CVE-2025-41395 | 1 Mattermost | 2 Mattermost, Mattermost Server | 2025-10-01 | 6.5 Medium |
| Mattermost versions 10.4.x <= 10.4.2, 10.5.x <= 10.5.0, 9.11.x <= 9.11.10 fail to properly validate the props used by the RetrospectivePost custom post type in the Playbooks plugin, which allows an attacker to create a specially crafted post with maliciously crafted props and cause a denial of service (DoS) of the web app for all users. | ||||
| CVE-2025-7074 | 1 Vercel | 1 Hyper | 2025-10-01 | 4.3 Medium |
| A vulnerability classified as problematic has been found in vercel hyper up to 3.4.1. This affects the function expand/braceExpand/ignoreMap of the file hyper/bin/rimraf-standalone.js. The manipulation leads to inefficient regular expression complexity. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-21966 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-flakey: Fix memory corruption in optional corrupt_bio_byte feature Fix memory corruption due to incorrect parameter being passed to bio_init | ||||
| CVE-2024-10921 | 1 Mongodb | 1 Mongodb | 2025-10-01 | 6.8 Medium |
| An authorized user may trigger crashes or receive the contents of buffer over-reads of Server memory by issuing specially crafted requests that construct malformed BSON in the MongoDB Server. This issue affects MongoDB Server v5.0 versions prior to 5.0.30 , MongoDB Server v6.0 versions prior to 6.0.19, MongoDB Server v7.0 versions prior to 7.0.15 and MongoDB Server v8.0 versions prior to and including 8.0.2. | ||||
| CVE-2024-52523 | 1 Nextcloud | 2 Nextcloud Enterprise Server, Nextcloud Server | 2025-10-01 | 4.6 Medium |
| Nextcloud Server is a self hosted personal cloud system. After setting up a user or administrator defined external storage with fixed credentials, the API returns them and adds them into the frontend again, allowing to read them in plain text when an attacker already has access to an active session of a user. It is recommended that the Nextcloud Server is upgraded to 28.0.12, 29.0.9 or 30.0.2 and Nextcloud Enterprise Server is upgraded to 25.0.13.14, 26.0.13.10, 27.1.11.10, 28.0.12, 29.0.9 or 30.0.2. | ||||
| CVE-2025-52548 | 1 Copeland | 8 E3 Supervisory Controller Firmware, Site Supervisor Bx 860-1240, Site Supervisor Bxe 860-1245 and 5 more | 2025-10-01 | 4.9 Medium |
| E3 Site Supervisor Control (firmware version < 2.31F01) contains a hidden API call in the application services that enables SSH and Shellinabox, which exist but are disabled by default. An attacker with admin access to the application services can utilize this API to enable remote access to the underlying OS. | ||||