| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Uninitialized memory in the Storage: Quota Manager component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, Firefox ESR 115.42, and Firefox ESR 140.17. |
| A missing authentication for critical function vulnerability exists in baserCMS. If this vulnerability is exploited, a remote attacker may obtain sensitive information. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode driver where a local user may access another process's GPU channel state due to missing authorization checks. A successful exploit of this vulnerability might lead to information disclosure. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in LA-Studio LA-Studio Element Kit for Elementor lastudio-element-kit allows DOM-Based XSS.This issue affects LA-Studio Element Kit for Elementor: from n/a through 1.6.3. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: zero-initialize policy cpumask before sysfs publication
cpufreq_policy_alloc() allocates policy->cpus with alloc_cpumask_var(),
i.e. without __GFP_ZERO, unlike the sibling related_cpus and real_cpus
masks. With CONFIG_CPUMASK_OFFSTACK=y the mask is a separate
kmalloc_node() allocation, so its bitmap holds whatever the slab allocator
left behind:
cpufreq_online()
cpufreq_policy_alloc()
alloc_cpumask_var(&policy->cpus) /* bitmap is uninitialized */
kobject_init_and_add() /* policy%u/ appears in sysfs */
cpufreq_policy_online()
cpumask_copy(policy->cpus, cpumask_of(cpu)) /* first valid value */
This leaves a window in which the sysfs attributes are already reachable
while policy->cpus is still garbage. show()/store() gate on
policy_is_inactive(), i.e. cpumask_empty(policy->cpus), so a non-zero
bitmap makes them run the attribute callbacks on a policy that is not
initialized yet.
Fix this by using zalloc_cpumask_var() for policy->cpus. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sti: initialize IRQ lock before requesting IRQ
uni_reader_init() registers the shared IRQ before initializing
reader->irq_lock. A pending interrupt can invoke the handler while the
lock is still uninitialized.
Initialize the lock before registering the IRQ so the interrupt path
always sees valid lock state. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Ensure SRAM size is 0 on mapping failure
On a mapping failure of the SRAM, the SRAM size is left as non-zero. The
probe will succeed as the error return is not checked since having SRAM is
not a hard requirement. The non-zero size allows jobs to access SRAM which
is left pointing to physical base address 0x0. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where an unprivileged user can write to read-only memory because the memory's permissions are not preserved. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, denial of service, information disclosure, and data tampering. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram the var ref when its initialization fails
create_var_ref() allocates a VAR_REF hist_field and then calls
init_var_ref() to fill it in. When that fails the field is leaked.
commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy
var_refs") made destroy_hist_field() return early for
HIST_FIELD_FL_VAR_REF, since var refs are freed by walking the trigger's
var_refs[] array instead. create_var_ref() adds the field to that array
only after init_var_ref() has succeeded, so on this path the field is in
neither place and nothing frees it. The call was correct when it was
written, before var refs were taken out of destroy_hist_field().
init_var_ref() cannot free it either. The caller owns the field, so
init_var_ref() undoes only its own string allocations and leaves the
field alone. Freeing it there would leave create_var_ref() passing freed
memory to destroy_hist_field(), which reads its flags.
Call __destroy_hist_field(), which frees the field without consulting
the flag. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Don't destroy fields when event removal fails
destroy_user_event() destroys the event's fields before attempting to
remove the trace event call. If user_event_set_call_visible() fails,
e.g. because the event is still enabled and trace_remove_event_call()
returns -EBUSY, the event is left registered with an irreversibly
destroyed field list. Any subsequent interaction with the event then
operates on an empty field list while it is still fully visible in
tracefs.
Move the field destruction after the call removal, and splice the
field list back onto the event when the removal fails so the event
remains in a consistent state. |
| In the Linux kernel, the following vulnerability has been resolved:
ufs: validate cylinder group metadata before caching it
ufs_read_cylinder() copies the cylinder group index and the rotor
positions straight from the on-disk group and caches them without any
check:
ucpi->c_cgx = fs32_to_cpu(sb, ucg->cg_cgx);
ucpi->c_rotor = fs32_to_cpu(sb, ucg->cg_rotor);
ucpi->c_frotor = fs32_to_cpu(sb, ucg->cg_frotor);
ucpi->c_irotor = fs32_to_cpu(sb, ucg->cg_irotor);
They are then used as indices during allocation and free:
- c_cgx indexes the cylinder summary array as
UFS_SB(sb)->fs_cs(ucpi->c_cgx), so a value past s_ncg writes a 32
bit count outside the s_csp allocation.
- c_frotor becomes a bitmap scan start, start = c_frotor >> 3, and
then length = ((s_fpg + 7) >> 3) - start. A start beyond the block
bitmap wraps the unsigned length to a huge value, so ubh_scanc()
walks far past the cylinder group buffers. c_irotor drives the
inode bitmap the same way.
A crafted image can set any of these freely, turning an ordinary
allocation into an out of bounds access.
Reject a cylinder group whose recorded index does not match the group
being read, or whose rotors fall outside the group, before the metadata
is cached. Valid filesystems keep cg_cgx equal to the group number and
the rotors within the group, so only malformed images are rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: skip the VMID 0 flush for VRAM
Clear-on-release only runs on VRAM, which amdgpu_ttm_map_buffer() reaches
via its direct MC address without programming a GART window, yet the wipe
still forces a VMID 0 flush. On GFX11 (e.g. Navi33) that spurious SDMA
flush can wedge the engine; only flush when a GART window is actually used.
v2: Let amdgpu_ttm_map_buffer() return whether the VMID 0 flush is needed,
and drive the clear and copy paths from that. (Christian)
v3: Make the vm_needs_flush output parameter mandatory instead of
allowing NULL. (Christian)
(cherry picked from commit a306e406e570b74318ff7d80e5b07b540ca1d3a9) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: us122l: Prevent write upgrades for read mappings
The hwdep mmap callback rejects read-buffer mappings that are initially
writable, but leaves VM_MAYWRITE set on mappings created with PROT_READ.
A process that can open the hwdep node O_RDWR can later use mprotect() to
make the mapping writable.
The read allocation begins with struct usb_stream. Its read_size member is
used by the fault handler to decide which pages belong to the read buffer.
The read VMA intentionally remains expandable because pcm_usb_stream uses
mremap() after reading that size. Changing read_size first can therefore
map and access pages beyond the allocation. The same member is also
consumed by usb_stream_free(), where changing it can make
free_pages_exact() release pages outside the allocation.
Clear VM_MAYWRITE for read-buffer mappings after rejecting an initially
writable VMA. This keeps the separate output-buffer mapping writable while
preventing later permission upgrades. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: pin the symlink target's dirent instead of chasing ->ci_dentry
create_link() reads the target's configfs_dirent from
item->ci_dentry->d_fsdata, relying on the item reference taken by
get_target(). That reference pins the item, not its dentry: the dentry is
pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via
simple_rmdir() while the item is still alive. A symlink racing with rmdir
of its target can therefore find ->ci_dentry freed and its dirent
released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get().
Take the dirent in get_target() as well, under ->d_lock and atomically
with the item reference, and pass it down to create_link(). A hashed
dentry has not been killed yet, so its ->d_fsdata reference keeps the
dirent alive there. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: fix tcp stream corruption with large pages
rds_message_map_pages() assigns PAGE_SIZE bytes to every
scatterlist entry, even when total_len ends in a partial page. The RDS
congestion map is defined as 8192 bytes, so on systems with PAGE_SIZE
greater than 8192 the scatterlist maps bytes beyond the end of the
congestion map. RDS-TCP transmits the SG contents according to those
lengths, so the extra bytes become part of the TCP RDS stream and are
interpreted as subsequent RDS message headers, corrupting the stream.
Limit the final scatterlist mapping to the number of bytes remaining.
This has no effect on systems with a 4K page size and allows RDS-TCP to
be used on systems with 16K and larger page sizes.
The RDS selftest, which previously hung on 16K pages, now passes. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Fix clock leak and spurious timer in settimeout()
msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which
introduces two severe bugs:
1. If the watchdog is already active, calling start() again will
increase the reference count of the clock again. However stop() is
only called once, the reference count is unbalance.
2. If the watchdog is stopped, calling settimeout() will start
the hardware timer accidentally.
Factor out the register-writing logic into a helper function. Only call
it in settimeout() if the watchdog is running. Otherwise, simply update
`wdev->timeout`. |
| In DB-GPT 0.7.5 and 0.8.0, a skill uploaded through the real /api/v1/skills/upload route can later be executed through the real /api/v1/chat/react-agent flow. |
| DB-GPT v0.8.0 sandbox API silently falls back to LocalRuntime and executes code on host. |
| The object name of a dynamically created BACnet File Object is interpreted as a file path without sufficient validation. Because relative paths are not limited to the intended directory, an unauthenticated remote attacker can traverse outside of it and read or overwrite arbitrary files on the device, which may lead to full system compromise. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Set the trace clock before registering the histogram trigger
hist_register_trigger() puts the trigger on the global named_triggers
list in cmd_ops->init(), and only then sets the trace clock:
if (data->cmd_ops->init) {
ret = data->cmd_ops->init(data);
if (ret < 0)
goto out;
}
if (hist_data->enable_timestamps) {
ret = tracing_set_clock(file->tr, hist_data->attrs->clock);
if (ret) {
hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock));
goto out;
}
The clock string is not checked anywhere before that call, so a named
trigger using common_timestamp with an unknown clock fails after it has
already become findable. event_hist_trigger_parse() then frees it
without taking it off the list, and the next lookup by name reads the
freed object:
~# cd /sys/kernel/tracing/events/sched/sched_switch
~# echo 'hist:name=foo:keys=common_pid:ts=common_timestamp:clock=bogus' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=foo:keys=common_pid' > trigger
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff88800915d760 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0x900
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 63:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Set the clock before the trigger is registered, so that nothing which
can fail runs after it is published, the way commit 6f86bdeab633
("tracing: Fix bad hist from corrupting named_triggers list") moved the
registration below the rest of the setup.
tracing_set_filter_buffering() is reference counted, so the init failure
path has to drop the reference that the clock block now takes first. |
