| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Enabling `CURLOPT_CRLF` causes curl to advertise the raw input byte count in
the `IMAP APPEND {N}` literal while transmitting line-ending expanded data.
The server reads only $N$ bytes for the payload, causing the remaining
overflow bytes to be interpreted and executed as pipelined IMAP commands
within the authenticated session. |
| Importing a `includeSubDomains` parent HSTS entry before a longer-lived child
entry, silently drops the child. Consequently, when the parent expires, the
child's valid HSTS policy is lost, causing curl to issue unencrypted HTTP
requests rather than upgrading to HTTPS. |
| Joomla Extension - lomart.fr - Unauthenticated remote code installation in UP plugin extension 5.0.0-5.2.0, 6.0.0-6.0.29 |
| When using ambient user credentials, an HTTP request directed to one origin
may be dispatched over a connection previously authenticated via Negotiate for
a different origin, leaving the request's intended credentials unused. |
| libcurl's connection cache match function never considers the automatic client
certificate option, so a cached, already authenticated Schannel connection can
be handed to a transfer that got redirected to a different origin, even though
the code explicitly switched off the auto client cert option for that transfer
to prevent exactly this. |
| An HTTP proxy can trick libcurl into sending the origin's credentials (Basic
password, or a Negotiate/Kerberos ticket) to the proxy itself, by answering
the `CONNECT` tunnel request with 401 `WWW-Authenticate:` instead of the
expected 407 `Proxy-Authenticate:`. |
| follow-redirects is a Node.js HTTP and HTTPS client wrapper that automatically follows redirects. From version 1.16.0 to before version 1.16.1, follow-redirects removes sensitive credential headers (Authorization, Proxy-Authorization, Cookie, and any caller-declared sensitiveHeaders) before following a redirect that crosses to a different host or downgrades to a less secure protocol. The removal routine iterates the caller's headers container with for...in and matches header names against a filter. This assumes the headers container is a plain object keyed by header names. Node's underlying http.request, which follow-redirects is a drop-in replacement for, also accepts headers as an alternating array of names and values. For an array, for...in yields the numeric indices "0", "1", "2" and so on, which never match a header-name filter, so nothing is removed. An application that sends array-form headers and follows an attacker-controlled cross-origin redirect therefore forwards its Authorization, Cookie, and Proxy-Authorization headers verbatim to the attacker-controlled destination, with no error or warning. The sensitiveHeaders option added to fix CVE-2026-40895 / GHSA-r4q5-vmmm-2653 is equally ineffective, because it relies on the same helper. This is an unauthenticated confidentiality vulnerability: any remote server the victim application contacts can harvest the victim's credential headers by responding with a cross-origin redirect. This issue has been patched in version 1.16.1. |
| When using an *ambient user* in a first transfer doing Negotiate
authentication and asked to follow redirects, curl could pass on its
credential details to an unrelated second origin when asked to redirect there. |
| Joomla Extension - svenbluege.de - CSRF in image upload in Event Gallery extension < 6.5.0 - Due to lack of an CSRF token check, a third-party site can upload files to an event and overwrite existing files with the same name. |
| A remote HTTP server can set a cookie that curl accepts and writes to a
Netscape cookie jar but cannot reload. On the next invocation using the same
path for `--cookie` and `--cookie-jar`, curl fails before connecting, then the
cleanup procedure replaces the jar with an empty file, deleting cookies for
unrelated domains. |
| An `ftp://` transfer configured with `CURLUSESSL_NONE` can reuse a pooled FTP
control connection that a previous easy handle upgraded with `STARTTLS` and
authenticated using a client certificate. The second handle performs neither a
new TLS handshake nor a new FTP login, so the server continues to authorize it
under the first handle's certificate identity. |
| In the Linux kernel, the following vulnerability has been resolved:
fou: reject omitted FOU_ATTR_IPPROTO on FOU_ENCAP_DIRECT
Commit 7a9bc9e3f423 ("fou: Don't allow 0 for FOU_ATTR_IPPROTO.") added
NLA_POLICY_MIN(NLA_U8, 1) to fou_nl_policy[FOU_ATTR_IPPROTO], which
rejects an explicitly supplied FOU_ATTR_IPPROTO == 0 attribute with
-ERANGE.
However, FOU_ATTR_IPPROTO is an optional netlink attribute. When a user
sends FOU_CMD_ADD with FOU_ATTR_TYPE set to FOU_ENCAP_DIRECT and omits
FOU_ATTR_IPPROTO entirely, nla_policy validation succeeds and
parse_nl_config() leaves cfg->protocol as 0 (from memset(cfg, 0,
sizeof(*cfg))). fou_create() then creates a FOU_ENCAP_DIRECT socket with
fou->protocol == 0.
In fou_udp_recv(), returning -fou->protocol to udp_queue_rcv_one_skb()
triggers IP protocol resubmission when fou->protocol > 0, whereas
returning 0 tells the UDP tunnel layer that the skb was consumed without
freeing it. When fou->protocol == 0, every packet received on the socket
returns 0 from fou_udp_recv() and leaks the sk_buff.
Reject FOU_ENCAP_DIRECT when !cfg->protocol in fou_create() so that
creating a direct encapsulation port without FOU_ATTR_IPPROTO fails with
-EINVAL while leaving FOU_CMD_DEL and FOU_CMD_GET (which share
parse_nl_config()) unaffected.
Tested in QEMU against Linux 7.3.0-rc3 by sending a FOU_CMD_ADD Generic
Netlink request with FOU_ATTR_PORT = 5555 and FOU_ATTR_TYPE =
FOU_ENCAP_DIRECT while omitting FOU_ATTR_IPPROTO. On the unfixed kernel,
FOU_CMD_ADD succeeds (err = 0), FOU_CMD_GET reports fou->type = 1 and
fou->protocol = 0, and sending 4000 UDP packets to 127.0.0.1:5555 leaks
all 4000 sk_buffs (SUnreclaim in /proc/meminfo grows from 41456 kB to
59008 kB, +17552 kB); with this patch applied, FOU_CMD_ADD is rejected
with -EINVAL (-22). |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Return PERR_NOCPUS in remote_partition_enable() on subpartitions_cpus conflict
When a remote partition is created underneath an existing local partition
via a non-partition (PRS_MEMBER) intermediate cgroup, update_prstate() sees
parent->partition_root_state == PRS_MEMBER and calls
remote_partition_enable().
Commit 86888c7bd117 ("cgroup/cpuset: Add warnings to catch inconsistency
in exclusive CPUs") replaced the cpumask_intersects(tmp->new_cpus,
subpartitions_cpus) error check in remote_partition_enable() with
WARN_ON_ONCE(). As a result, remote_partition_enable() emits a warning
and proceeds to enable the remote partition on CPUs that are already
owned by the ancestor local partition in subpartitions_cpus.
This can be reproduced on Linux 7.3.0-rc3 with:
mkdir -p /tmp/cg1
mount -t cgroup2 none /tmp/cg1
echo "+cpuset" > /tmp/cg1/cgroup.subtree_control
mkdir /tmp/cg1/A
echo 1 > /tmp/cg1/A/cpuset.cpus
echo 1 > /tmp/cg1/A/cpuset.cpus.exclusive
echo root > /tmp/cg1/A/cpuset.cpus.partition
echo "+cpuset" > /tmp/cg1/A/cgroup.subtree_control
mkdir /tmp/cg1/A/B
echo 1 > /tmp/cg1/A/B/cpuset.cpus
echo 1 > /tmp/cg1/A/B/cpuset.cpus.exclusive
echo "+cpuset" > /tmp/cg1/A/B/cgroup.subtree_control
mkdir /tmp/cg1/A/B/D
echo 1 > /tmp/cg1/A/B/D/cpuset.cpus
echo 1 > /tmp/cg1/A/B/D/cpuset.cpus.exclusive
echo root > /tmp/cg1/A/B/D/cpuset.cpus.partition
which triggers:
WARNING: kernel/cgroup/cpuset.c:1594 at remote_partition_enable+0x1c1/0x300
and leaves both /tmp/cg1/A and /tmp/cg1/A/B/D as active root partitions
claiming exclusive CPU 1.
Fix this by returning PERR_NOCPUS when tmp->new_cpus intersects
subpartitions_cpus in remote_partition_enable(), matching the error code
used by remote_cpus_update() for the same subpartitions_cpus conflict, and
add a regression test case to
tools/testing/selftests/cgroup/test_cpuset_prs.sh.
Tested in QEMU on Linux 7.3.0-rc3 using the reproducer above and
tools/testing/selftests/cgroup/test_cpuset_prs.sh. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-scsi: bound the ATA passthru sense descriptor writes
When an ATA PASS-THROUGH command to an ATAPI device fails, the sense
buffer holds the device's REQUEST SENSE reply, and
ata_scsi_set_passthru_sense_fields() trusts its additional length
byte, sb[7], when adding the ATA Status Return descriptor. A faulty
or malicious device can use that to make the kernel read and write
past the 96-byte buffer in three ways:
- scsi_sense_desc_find() is passed sb[7] + 8 as the buffer length, so
its clamp against sb[7] does nothing and the walk runs off the end.
- A type-9 descriptor found near the end is filled in unchecked.
- A new descriptor at sb[8 + len] needs len + 22 bytes, not len + 14,
so len 75..82 writes up to 8 bytes past the end.
Reproduced with KASAN under qemu, with the emulated ATAPI REQUEST SENSE
reply patched:
BUG: KASAN: slab-out-of-bounds in scsi_sense_desc_find+0x1a5/0x210
BUG: KASAN: slab-out-of-bounds in ata_scsi_qc_complete+0x1a15/0x1a50
Both are gone with this patch, and a valid descriptor is still filled
in. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: stop Tx NAPI before disabling the queues
bcmgenet_netif_stop() and the Wake-on-LAN branch of bcmgenet_suspend()
both disable the Tx queues first and stop Tx NAPI several steps later. A
completion in flight calls netif_tx_wake_queue() in between, and nothing
stops the queue again, so a transmit can reach the rings after they have
been freed.
Close is safe because dev_deactivate_many() stops the qdisc first.
bcmgenet_suspend() does not, so stop Tx NAPI before the queues on both
paths.
KASAN on a Raspberry Pi CM4, driven from an MTU change because suspend
freezes user space before the callback runs:
BUG: KASAN: use-after-free in bcmgenet_xmit+0x17f8/0x2258
Write of size 8 at addr ffffff8055844a68 by task ksoftirqd/0/14
bcmgenet_xmit+0x17f8/0x2258
dev_hard_start_xmit+0x13c/0x588
sch_direct_xmit+0x108/0x340
__dev_queue_xmit+0x1190/0x3848 |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: fix WKS SAP hijacking via prefix match in nfc_llcp_wks_sap()
nfc_llcp_wks_sap() compares only service_name_len bytes, so a short
service_name like "u" matches longer WKS strings like "urn:nfc:sn:snep".
Fix by requiring exact length match before strncmp(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: fix sdreq TLV list leak on parse/alloc/send failure
nfc_genl_llc_sdreq() builds a list of TLV nodes while walking nested
netlink attrs, but 3 error paths (nested-attr parse failure, TLV alloc
ENOMEM, nfc_llcp_send_snl_sdreq() failure) all skip freeing what was
already queued.
Route them through a new free_list label, mirroring the SDRES path in
the same file which already does this. Harmless on the success path
too -- send_snl_sdreq() drains the list as it moves nodes, so it's
already empty by the time free_list runs. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix race condition in accept_queue lifecycle
In nfc_llcp_socket_release(), sockets and listener accept queues are
walked under the local sockets rwlock and bh_lock_sock(). However,
bh_lock_sock() does not synchronise against process-context lock_sock()
held by nfc_llcp_accept_dequeue() during accept(). Because
socket_release() does not check sock_owned_by_user(), both paths can
concurrently unlink and release the same child socket, resulting in
use-after-free or a NULL pointer dereference of child->parent in
nfc_llcp_accept_unlink().
Fix this synchronisation race by having nfc_llcp_socket_release() use
process-context lock_sock() instead of bh_lock_sock():
1. Pop sockets from the local sockets list under the write lock using
nfc_llcp_sock_list_pop() so lock_sock() can be acquired without
holding the rwlock.
2. Because lock_sock() can sleep, defer the final release of the
nfc_llcp_local structure to a workqueue (release_work). This avoids
a sleeping-in-atomic bug when the last local reference is dropped
from softirq context. Additionally, hold a single device reference
on local from registration until final destruction.
3. In nfc_llcp_local_get(), use kref_get_unless_zero() to prevent
resurrecting a local object whose teardown has been scheduled.
4. In llcp_sock_accept(), verify that the listener socket state is still
LLCP_LISTEN after waking from schedule_timeout() to prevent hangs if
the listener is closed concurrently.
5. When unlinking unaccepted child sockets during listener release,
unlink them from local->sockets, call sock_orphan(), and drop their
initial sk_alloc creation reference via sock_put().
6. Make nfc_llcp_accept_unlink() idempotent by guarding parent access with
a NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix list corruption / refcount desync in nfc_llcp_recv_dm()
nfc_llcp_recv_dm() handles DM(NOBOUND)/DM(REJ) for a socket that is still
linked on local->connecting_sockets: it looks the socket up with
nfc_llcp_connecting_sock_get(), sets sk->sk_state = LLCP_CLOSED and
returns, without taking the socket lock and without unlinking the socket
from the connecting_sockets list.
llcp_sock_release() selects the list to unlink from by sk_state: a socket
in LLCP_CONNECTING is unlinked from connecting_sockets, otherwise from the
sockets list. Because recv_dm left the socket physically on
connecting_sockets but in the LLCP_CLOSED state, release() takes the else
branch and calls nfc_llcp_sock_unlink(&local->sockets, sk). That runs
sk_del_node_init() while holding sockets.lock, i.e. it removes the socket
from the connecting_sockets hlist under the wrong lock. A concurrent
connect() linking another socket onto connecting_sockets under
connecting_sockets.lock then mutates the same hlist unserialized, which
corrupts the list and desyncs the sk_add_node()/sk_del_node_init()
sock_hold()/__sock_put() pairing. An unprivileged local process holding
LLCP sockets, with the DM supplied by the remote peer over an established
LLCP link, can drive this to leak kernel sockets without bound (the
mis-decrement goes through the non-freeing __sock_put() path, so the
object is never released), leading to memory exhaustion / DoS.
This is the same class of bug that was fixed in the sibling handler
nfc_llcp_recv_cc() by commit b493ea2765cc ("nfc: llcp: Fix use-after-free
race in nfc_llcp_recv_cc()"); recv_dm did not receive the equivalent fix.
Fix it the same way: take lock_sock(), re-check that the socket is still
hashed (release() may have won the race), and for the NOBOUND/REJ case
unlink it from connecting_sockets before moving it to LLCP_CLOSED. The
unlink drops the connecting_sockets membership reference via
sk_del_node_init(), leaving the socket unhashed, so the later
nfc_llcp_sock_unlink() in llcp_sock_release() becomes a no-op and no
double put occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix potential stack infoleak in em_text_dump()
em_text_dump() allocates struct tcf_em_text on the stack without zeroing
it. strscpy() writes the algorithm name and a NUL terminator into
conf.algo[], leaving the remaining bytes uninitialised. nla_put_nohdr()
then copies the full struct to the netlink response.
KMSAN on Linux 7.2-rc6 reports two kernel-infoleak splats from this path,
one triggered via "tc filter show" and one via a raw RTM_GETTFILTER dump:
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x1c9/0x2620
nla_put_nohdr+0x83/0x130
em_text_dump+0x291/0x550
Local variable conf created at: em_text_dump+0x5d/0x550
Bytes 168-179 of 199 are uninitialized
I am not certain whether this constitutes a real security problem in
practice: the test was conducted in a controlled KMSAN environment and
the leaked stack bytes may or may not carry sensitive data on actual
production kernels. I am reporting it because KMSAN flagged it as a
kernel-infoleak and the fix is straightforward. I can provide a
userspace reproducer on request.
The original code used strncpy() which zero-pads to the destination size.
Commit b04202d6065c ("net/sched: replace strncpy with strscpy") replaced
it with strscpy(), which does not pad, creating this condition.
Zero-initialising the struct closes it. |
