| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address
The device stores IPv6 addresses that are used for encapsulation in
linear memory that is managed by the driver.
Changing the remote address of an ip6gre net device never worked
properly, but since cited commit the following reproducer [1] would
result in a warning [2] and a memory leak [3]. The problem is that the
new remote address is never added by the driver to its hash table (and
therefore the device) and the old address is never removed from it.
Fix by programming the new address when the configuration of the ip6gre
net device changes and removing the old one. If the address did not
change, then the above would result in increasing the reference count of
the address and then decreasing it.
[1]
# ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit
# ip link set dev bla type ip6gre remote 2001:db8:3::1
# ip link del dev bla
# devlink dev reload pci/0000:01:00.0
[2]
WARNING: CPU: 0 PID: 1682 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3002 mlxsw_sp_ipv6_addr_put+0x140/0x1d0
Modules linked in:
CPU: 0 UID: 0 PID: 1682 Comm: ip Not tainted 6.12.0-rc3-custom-g86b5b55bc835 #151
Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023
RIP: 0010:mlxsw_sp_ipv6_addr_put+0x140/0x1d0
[...]
Call Trace:
<TASK>
mlxsw_sp_router_netdevice_event+0x55f/0x1240
notifier_call_chain+0x5a/0xd0
call_netdevice_notifiers_info+0x39/0x90
unregister_netdevice_many_notify+0x63e/0x9d0
rtnl_dellink+0x16b/0x3a0
rtnetlink_rcv_msg+0x142/0x3f0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x242/0x390
netlink_sendmsg+0x1de/0x420
____sys_sendmsg+0x2bd/0x320
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xd0
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[3]
unreferenced object 0xffff898081f597a0 (size 32):
comm "ip", pid 1626, jiffies 4294719324
hex dump (first 32 bytes):
20 01 0d b8 00 02 00 00 00 00 00 00 00 00 00 01 ...............
21 49 61 83 80 89 ff ff 00 00 00 00 01 00 00 00 !Ia.............
backtrace (crc fd9be911):
[<00000000df89c55d>] __kmalloc_cache_noprof+0x1da/0x260
[<00000000ff2a1ddb>] mlxsw_sp_ipv6_addr_kvdl_index_get+0x281/0x340
[<000000009ddd445d>] mlxsw_sp_router_netdevice_event+0x47b/0x1240
[<00000000743e7757>] notifier_call_chain+0x5a/0xd0
[<000000007c7b9e13>] call_netdevice_notifiers_info+0x39/0x90
[<000000002509645d>] register_netdevice+0x5f7/0x7a0
[<00000000c2e7d2a9>] ip6gre_newlink_common.isra.0+0x65/0x130
[<0000000087cd6d8d>] ip6gre_newlink+0x72/0x120
[<000000004df7c7cc>] rtnl_newlink+0x471/0xa20
[<0000000057ed632a>] rtnetlink_rcv_msg+0x142/0x3f0
[<0000000032e0d5b5>] netlink_rcv_skb+0x50/0x100
[<00000000908bca63>] netlink_unicast+0x242/0x390
[<00000000cdbe1c87>] netlink_sendmsg+0x1de/0x420
[<0000000011db153e>] ____sys_sendmsg+0x2bd/0x320
[<000000003b6d53eb>] ___sys_sendmsg+0x9a/0xe0
[<00000000cae27c62>] __sys_sendmsg+0x7a/0xd0 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: CPPC: Make rmw_lock a raw_spin_lock
The following BUG was triggered:
=============================
[ BUG: Invalid wait context ]
6.12.0-rc2-XXX #406 Not tainted
-----------------------------
kworker/1:1/62 is trying to lock:
ffffff8801593030 (&cpc_ptr->rmw_lock){+.+.}-{3:3}, at: cpc_write+0xcc/0x370
other info that might help us debug this:
context-{5:5}
2 locks held by kworker/1:1/62:
#0: ffffff897ef5ec98 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x2c/0x50
#1: ffffff880154e238 (&sg_policy->update_lock){....}-{2:2}, at: sugov_update_shared+0x3c/0x280
stack backtrace:
CPU: 1 UID: 0 PID: 62 Comm: kworker/1:1 Not tainted 6.12.0-rc2-g9654bd3e8806 #406
Workqueue: 0x0 (events)
Call trace:
dump_backtrace+0xa4/0x130
show_stack+0x20/0x38
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x28
__lock_acquire+0x480/0x1ad8
lock_acquire+0x114/0x310
_raw_spin_lock+0x50/0x70
cpc_write+0xcc/0x370
cppc_set_perf+0xa0/0x3a8
cppc_cpufreq_fast_switch+0x40/0xc0
cpufreq_driver_fast_switch+0x4c/0x218
sugov_update_shared+0x234/0x280
update_load_avg+0x6ec/0x7b8
dequeue_entities+0x108/0x830
dequeue_task_fair+0x58/0x408
__schedule+0x4f0/0x1070
schedule+0x54/0x130
worker_thread+0xc0/0x2e8
kthread+0x130/0x148
ret_from_fork+0x10/0x20
sugov_update_shared() locks a raw_spinlock while cpc_write() locks a
spinlock.
To have a correct wait-type order, update rmw_lock to a raw spinlock and
ensure that interrupts will be disabled on the CPU holding it.
[ rjw: Changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix possible deadlock in mi_read
Mutex lock with another subclass used in ni_lock_dir(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Additional check in ni_clear()
Checking of NTFS_FLAGS_LOG_REPLAYING added to prevent access to
uninitialized bitmap during replay process. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix general protection fault in run_is_mapped_full
Fixed deleating of a non-resident attribute in ntfs_create_inode()
rollback. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Additional check in ntfs_file_release |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: Fix memory leak in management tx
In the current logic, memory is allocated for storing the MSDU context
during management packet TX but this memory is not being freed during
management TX completion. Similar leaks are seen in the management TX
cleanup logic.
Kmemleak reports this problem as below,
unreferenced object 0xffffff80b64ed250 (size 16):
comm "kworker/u16:7", pid 148, jiffies 4294687130 (age 714.199s)
hex dump (first 16 bytes):
00 2b d8 d8 80 ff ff ff c4 74 e9 fd 07 00 00 00 .+.......t......
backtrace:
[<ffffffe6e7b245dc>] __kmem_cache_alloc_node+0x1e4/0x2d8
[<ffffffe6e7adde88>] kmalloc_trace+0x48/0x110
[<ffffffe6bbd765fc>] ath10k_wmi_tlv_op_gen_mgmt_tx_send+0xd4/0x1d8 [ath10k_core]
[<ffffffe6bbd3eed4>] ath10k_mgmt_over_wmi_tx_work+0x134/0x298 [ath10k_core]
[<ffffffe6e78d5974>] process_scheduled_works+0x1ac/0x400
[<ffffffe6e78d60b8>] worker_thread+0x208/0x328
[<ffffffe6e78dc890>] kthread+0x100/0x1c0
[<ffffffe6e78166c0>] ret_from_fork+0x10/0x20
Free the memory during completion and cleanup to fix the leak.
Protect the mgmt_pending_tx idr_remove() operation in
ath10k_wmi_tlv_op_cleanup_mgmt_tx_send() using ar->data_lock similar to
other instances.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: clear wdev->cqm_config pointer on free
When we free wdev->cqm_config when unregistering, we also
need to clear out the pointer since the same wdev/netdev
may get re-registered in another network namespace, then
destroyed later, running this code again, which results in
a double-free. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()
In the ad9832_write_frequency() function, clk_get_rate() might return 0.
This can lead to a division by zero when calling ad9832_calc_freqreg().
The check if (fout > (clk_get_rate(st->mclk) / 2)) does not protect
against the case when fout is 0. The ad9832_write_frequency() function
is called from ad9832_write(), and fout is derived from a text buffer,
which can contain any value. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr()
In the ad7124_write_raw() function, parameter val can potentially
be zero. This may lead to a division by zero when DIV_ROUND_CLOSEST()
is called within ad7124_set_channel_odr(). The ad7124_write_raw()
function is invoked through the sequence: iio_write_channel_raw() ->
iio_write_channel_attribute() -> iio_channel_write(), with no checks
in place to ensure val is non-zero. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix potential deadlock with newly created symlinks
Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers
memory reclamation involving the filesystem layer, which can result in
circular lock dependencies among the reader/writer semaphore
nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the
fs_reclaim pseudo lock.
This is because after commit 21fc61c73c39 ("don't put symlink bodies in
pagecache into highmem"), the gfp flags of the page cache for symbolic
links are overwritten to GFP_KERNEL via inode_nohighmem().
This is not a problem for symlinks read from the backing device, because
the __GFP_FS flag is dropped after inode_nohighmem() is called. However,
when a new symlink is created with nilfs_symlink(), the gfp flags remain
overwritten to GFP_KERNEL. Then, memory allocation called from
page_symlink() etc. triggers memory reclamation including the FS layer,
which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can
cause a deadlock if they are called while nilfs->ns_segctor_sem is held:
Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags
of newly created symlinks in the same way that nilfs_new_inode() and
__nilfs_read_inode() do, as a workaround until we adopt nofs allocation
scope consistently or improve the locking constraints. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: pass u64 to ocfs2_truncate_inline maybe overflow
Syzbot reported a kernel BUG in ocfs2_truncate_inline. There are two
reasons for this: first, the parameter value passed is greater than
ocfs2_max_inline_data_with_xattr, second, the start and end parameters of
ocfs2_truncate_inline are "unsigned int".
So, we need to add a sanity check for byte_start and byte_len right before
ocfs2_truncate_inline() in ocfs2_remove_inode_range(), if they are greater
than ocfs2_max_inline_data_with_xattr return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Add a check for memory allocation
__alloc_pbl() can return error when memory allocation fails.
Driver is not checking the status on one of the instances. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: propagate directory read errors from nilfs_find_entry()
Syzbot reported that a task hang occurs in vcs_open() during a fuzzing
test for nilfs2.
The root cause of this problem is that in nilfs_find_entry(), which
searches for directory entries, ignores errors when loading a directory
page/folio via nilfs_get_folio() fails.
If the filesystem images is corrupted, and the i_size of the directory
inode is large, and the directory page/folio is successfully read but
fails the sanity check, for example when it is zero-filled,
nilfs_check_folio() may continue to spit out error messages in bursts.
Fix this issue by propagating the error to the callers when loading a
page/folio fails in nilfs_find_entry().
The current interface of nilfs_find_entry() and its callers is outdated
and cannot propagate error codes such as -EIO and -ENOMEM returned via
nilfs_find_entry(), so fix it together. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: Fix encoder->possible_clones
Include the encoder itself in its possible_clones bitmask.
In the past nothing validated that drivers were populating
possible_clones correctly, but that changed in commit
74d2aacbe840 ("drm: Validate encoder->possible_clones").
Looks like radeon never got the memo and is still not
following the rules 100% correctly.
This results in some warnings during driver initialization:
Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7)
WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c
...
(cherry picked from commit 3b6e7d40649c0d75572039aff9d0911864c689db) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/swapfile: skip HugeTLB pages for unuse_vma
I got a bad pud error and lost a 1GB HugeTLB when calling swapoff. The
problem can be reproduced by the following steps:
1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory.
2. Swapout the above anonymous memory.
3. run swapoff and we will get a bad pud error in kernel message:
mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7)
We can tell that pud_clear_bad is called by pud_none_or_clear_bad in
unuse_pud_range() by ftrace. And therefore the HugeTLB pages will never
be freed because we lost it from page table. We can skip HugeTLB pages
for unuse_vma to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: veml6030: fix IIO device retrieval from embedded device
The dev pointer that is received as an argument in the
in_illuminance_period_available_show function references the device
embedded in the IIO device, not in the i2c client.
dev_to_iio_dev() must be used to accessthe right data. The current
implementation leads to a segmentation fault on every attempt to read
the attribute because indio_dev gets a NULL assignment.
This bug has been present since the first appearance of the driver,
apparently since the last version (V6) before getting applied. A
constant attribute was used until then, and the last modifications might
have not been tested again. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: ocelot: fix system hang on level based interrupts
The current implementation only calls chained_irq_enter() and
chained_irq_exit() if it detects pending interrupts.
```
for (i = 0; i < info->stride; i++) {
uregmap_read(info->map, id_reg + 4 * i, ®);
if (!reg)
continue;
chained_irq_enter(parent_chip, desc);
```
However, in case of GPIO pin configured in level mode and the parent
controller configured in edge mode, GPIO interrupt might be lowered by the
hardware. In the result, if the interrupt is short enough, the parent
interrupt is still pending while the GPIO interrupt is cleared;
chained_irq_enter() never gets called and the system hangs trying to
service the parent interrupt.
Moving chained_irq_enter() and chained_irq_exit() outside the for loop
ensures that they are called even when GPIO interrupt is lowered by the
hardware.
The similar code with chained_irq_enter() / chained_irq_exit() functions
wrapping interrupt checking loop may be found in many other drivers:
```
grep -r -A 10 chained_irq_enter drivers/pinctrl
``` |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: probes: Fix uprobes for big-endian kernels
The arm64 uprobes code is broken for big-endian kernels as it doesn't
convert the in-memory instruction encoding (which is always
little-endian) into the kernel's native endianness before analyzing and
simulating instructions. This may result in a few distinct problems:
* The kernel may may erroneously reject probing an instruction which can
safely be probed.
* The kernel may erroneously erroneously permit stepping an
instruction out-of-line when that instruction cannot be stepped
out-of-line safely.
* The kernel may erroneously simulate instruction incorrectly dur to
interpretting the byte-swapped encoding.
The endianness mismatch isn't caught by the compiler or sparse because:
* The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so
the compiler and sparse have no idea these contain a little-endian
32-bit value. The core uprobes code populates these with a memcpy()
which similarly does not handle endianness.
* While the uprobe_opcode_t type is an alias for __le32, both
arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[]
to the similarly-named probe_opcode_t, which is an alias for u32.
Hence there is no endianness conversion warning.
Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and
adding the appropriate __le32_to_cpu() conversions prior to consuming
the instruction encoding. The core uprobes copies these fields as opaque
ranges of bytes, and so is unaffected by this change.
At the same time, remove MAX_UINSN_BYTES and consistently use
AARCH64_INSN_SIZE for clarity.
Tested with the following:
| #include <stdio.h>
| #include <stdbool.h>
|
| #define noinline __attribute__((noinline))
|
| static noinline void *adrp_self(void)
| {
| void *addr;
|
| asm volatile(
| " adrp %x0, adrp_self\n"
| " add %x0, %x0, :lo12:adrp_self\n"
| : "=r" (addr));
| }
|
|
| int main(int argc, char *argv)
| {
| void *ptr = adrp_self();
| bool equal = (ptr == adrp_self);
|
| printf("adrp_self => %p\n"
| "adrp_self() => %p\n"
| "%s\n",
| adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL");
|
| return 0;
| }
.... where the adrp_self() function was compiled to:
| 00000000004007e0 <adrp_self>:
| 4007e0: 90000000 adrp x0, 400000 <__ehdr_start>
| 4007e4: 911f8000 add x0, x0, #0x7e0
| 4007e8: d65f03c0 ret
Before this patch, the ADRP is not recognized, and is assumed to be
steppable, resulting in corruption of the result:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0xffffffffff7e0
| NOT EQUAL
After this patch, the ADRP is correctly recognized and simulated:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| #
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL |
| In the Linux kernel, the following vulnerability has been resolved:
x86/entry_32: Clear CPU buffers after register restore in NMI return
CPU buffers are currently cleared after call to exc_nmi, but before
register state is restored. This may be okay for MDS mitigation but not for
RDFS. Because RDFS mitigation requires CPU buffers to be cleared when
registers don't have any sensitive data.
Move CLEAR_CPU_BUFFERS after RESTORE_ALL_NMI. |
