| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dpll: fix dpll_pin_on_pin_register() for multiple parent pins
In scenario where pin is registered with multiple parent pins via
dpll_pin_on_pin_register(..), all belonging to the same dpll device.
A second call to dpll_pin_on_pin_unregister(..) would cause a call trace,
as it tries to use already released registration resources (due to fix
introduced in b446631f355e). In this scenario pin was registered twice,
so resources are not yet expected to be release until each registered
pin/pin pair is unregistered.
Currently, the following crash/call trace is produced when ice driver is
removed on the system with installed E810T NIC which includes dpll device:
WARNING: CPU: 51 PID: 9155 at drivers/dpll/dpll_core.c:809 dpll_pin_ops+0x20/0x30
RIP: 0010:dpll_pin_ops+0x20/0x30
Call Trace:
? __warn+0x7f/0x130
? dpll_pin_ops+0x20/0x30
dpll_msg_add_pin_freq+0x37/0x1d0
dpll_cmd_pin_get_one+0x1c0/0x400
? __nlmsg_put+0x63/0x80
dpll_pin_event_send+0x93/0x140
dpll_pin_on_pin_unregister+0x3f/0x100
ice_dpll_deinit_pins+0xa1/0x230 [ice]
ice_remove+0xf1/0x210 [ice]
Fix by adding a parent pointer as a cookie when creating a registration,
also when searching for it. For the regular pins pass NULL, this allows to
create separated registration for each parent the pin is registered with. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ptdma: Fix the error handling path in pt_core_init()
In order to free resources correctly in the error handling path of
pt_core_init(), 2 goto's have to be switched. Otherwise, some resources
will leak and we will try to release things that have not been allocated
yet.
Also move a dev_err() to a place where it is more meaningful. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ks8851: Handle softirqs at the end of IRQ thread to fix hang
The ks8851_irq() thread may call ks8851_rx_pkts() in case there are
any packets in the MAC FIFO, which calls netif_rx(). This netif_rx()
implementation is guarded by local_bh_disable() and local_bh_enable().
The local_bh_enable() may call do_softirq() to run softirqs in case
any are pending. One of the softirqs is net_rx_action, which ultimately
reaches the driver .start_xmit callback. If that happens, the system
hangs. The entire call chain is below:
ks8851_start_xmit_par from netdev_start_xmit
netdev_start_xmit from dev_hard_start_xmit
dev_hard_start_xmit from sch_direct_xmit
sch_direct_xmit from __dev_queue_xmit
__dev_queue_xmit from __neigh_update
__neigh_update from neigh_update
neigh_update from arp_process.constprop.0
arp_process.constprop.0 from __netif_receive_skb_one_core
__netif_receive_skb_one_core from process_backlog
process_backlog from __napi_poll.constprop.0
__napi_poll.constprop.0 from net_rx_action
net_rx_action from __do_softirq
__do_softirq from call_with_stack
call_with_stack from do_softirq
do_softirq from __local_bh_enable_ip
__local_bh_enable_ip from netif_rx
netif_rx from ks8851_irq
ks8851_irq from irq_thread_fn
irq_thread_fn from irq_thread
irq_thread from kthread
kthread from ret_from_fork
The hang happens because ks8851_irq() first locks a spinlock in
ks8851_par.c ks8851_lock_par() spin_lock_irqsave(&ksp->lock, ...)
and with that spinlock locked, calls netif_rx(). Once the execution
reaches ks8851_start_xmit_par(), it calls ks8851_lock_par() again
which attempts to claim the already locked spinlock again, and the
hang happens.
Move the do_softirq() call outside of the spinlock protected section
of ks8851_irq() by disabling BHs around the entire spinlock protected
section of ks8851_irq() handler. Place local_bh_enable() outside of
the spinlock protected section, so that it can trigger do_softirq()
without the ks8851_par.c ks8851_lock_par() spinlock being held, and
safely call ks8851_start_xmit_par() without attempting to lock the
already locked spinlock.
Since ks8851_irq() is protected by local_bh_disable()/local_bh_enable()
now, replace netif_rx() with __netif_rx() which is not duplicating the
local_bh_disable()/local_bh_enable() calls. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
commit 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear
mapping") added logic to allow using RAM below the kernel load address.
However, this does not work for NOMMU, where PAGE_OFFSET is fixed to the
kernel load address. Since that range of memory corresponds to PFNs
below ARCH_PFN_OFFSET, mm initialization runs off the beginning of
mem_map and corrupts adjacent kernel memory. Fix this by restoring the
previous behavior for NOMMU kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: parsers: qcom: Fix missing free for pparts in cleanup
Mtdpart doesn't free pparts when a cleanup function is declared.
Add missing free for pparts in cleanup function for smem to fix the
leak. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue
drain_workqueue() cannot be called safely in a spinlocked context due to
possible task rescheduling. In the multi-task scenario, calling
queue_work() while drain_workqueue() will lead to a Call Trace as
pushing a work on a draining workqueue is not permitted in spinlocked
context.
Call Trace:
<TASK>
? __warn+0x7d/0x140
? __queue_work+0x2b2/0x440
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? __queue_work+0x2b2/0x440
queue_work_on+0x28/0x30
idxd_misc_thread+0x303/0x5a0 [idxd]
? __schedule+0x369/0xb40
? __pfx_irq_thread_fn+0x10/0x10
? irq_thread+0xbc/0x1b0
irq_thread_fn+0x21/0x70
irq_thread+0x102/0x1b0
? preempt_count_add+0x74/0xa0
? __pfx_irq_thread_dtor+0x10/0x10
? __pfx_irq_thread+0x10/0x10
kthread+0x103/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
The current implementation uses a spinlock to protect event log workqueue
and will lead to the Call Trace due to potential task rescheduling.
To address the locking issue, convert the spinlock to mutex, allowing
the drain_workqueue() to be called in a safe mutex-locked context.
This change ensures proper synchronization when accessing the event log
workqueue, preventing potential Call Trace and improving the overall
robustness of the code. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: decrease MHI channel buffer length to 8KB
Currently buf_len field of ath11k_mhi_config_qca6390 is assigned
with 0, making MHI use a default size, 64KB, to allocate channel
buffers. This is likely to fail in some scenarios where system
memory is highly fragmented and memory compaction or reclaim is
not allowed.
There is a fail report which is caused by it:
kworker/u32:45: page allocation failure: order:4, mode:0x40c00(GFP_NOIO|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 0 PID: 19318 Comm: kworker/u32:45 Not tainted 6.8.0-rc3-1.gae4495f-default #1 openSUSE Tumbleweed (unreleased) 493b6d5b382c603654d7a81fc3c144d59a1dfceb
Workqueue: events_unbound async_run_entry_fn
Call Trace:
<TASK>
dump_stack_lvl+0x47/0x60
warn_alloc+0x13a/0x1b0
? srso_alias_return_thunk+0x5/0xfbef5
? __alloc_pages_direct_compact+0xab/0x210
__alloc_pages_slowpath.constprop.0+0xd3e/0xda0
__alloc_pages+0x32d/0x350
? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
__kmalloc_large_node+0x72/0x110
__kmalloc+0x37c/0x480
? mhi_map_single_no_bb+0x77/0xf0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
__mhi_prepare_for_transfer+0x44/0x80 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
? __pfx_____mhi_prepare_for_transfer+0x10/0x10 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
device_for_each_child+0x5c/0xa0
? __pfx_pci_pm_resume+0x10/0x10
ath11k_core_resume+0x65/0x100 [ath11k a5094e22d7223135c40d93c8f5321cf09fd85e4e]
? srso_alias_return_thunk+0x5/0xfbef5
ath11k_pci_pm_resume+0x32/0x60 [ath11k_pci 830b7bfc3ea80ebef32e563cafe2cb55e9cc73ec]
? srso_alias_return_thunk+0x5/0xfbef5
dpm_run_callback+0x8c/0x1e0
device_resume+0x104/0x340
? __pfx_dpm_watchdog_handler+0x10/0x10
async_resume+0x1d/0x30
async_run_entry_fn+0x32/0x120
process_one_work+0x168/0x330
worker_thread+0x2f5/0x410
? __pfx_worker_thread+0x10/0x10
kthread+0xe8/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Actually those buffers are used only by QMI target -> host communication.
And for WCN6855 and QCA6390, the largest packet size for that is less
than 6KB. So change buf_len field to 8KB, which results in order 1
allocation if page size is 4KB. In this way, we can at least save some
memory, and as well as decrease the possibility of allocation failure
in those scenarios.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 |
| A command injection vulnerability has been reported to affect QuRouter 2.5.1. If a remote attacker gains an administrator account, they can then exploit the vulnerability to execute arbitrary commands.
We have already fixed the vulnerability in the following version:
QuRouter 2.5.1.060 and later |
| Reflected Cross-Site Scripting in the Change Template function in Easy Hosting Control Panel (EHCP) 20.04.1.b allows authenticated attackers to execute arbitrary JavaScript via the template parameter. |
| Reflected Cross-Site Scripting in the List MySQL Databases function in Easy Hosting Control Panel (EHCP) 20.04.1.b allows authenticated attackers to execute arbitrary JavaScript via the action parameter. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/a4xx: fix error handling in a4xx_gpu_init()
This code returns 1 on error instead of a negative error. It leads to
an Oops in the caller. A second problem is that the check for
"if (ret != -ENODATA)" cannot be true because "ret" is set to 1. |
| Easy Hosting Control Panel EHCP v20.04.1.b was discovered to contain a SQL injection vulnerability via the id parameter in the List All Email Addresses function. |
| A CORS misconfiguration in Nginx Proxy Manager v2.12.3 allows unauthorized domains to access sensitive data, particularly JWT tokens, due to improper validation of the Origin header. This misconfiguration enables attackers to intercept tokens using a simple browser script and exfiltrate them to a remote attacker-controlled server, potentially leading to unauthorized actions within the application. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL
If we fail to copy the just created file descriptor to userland, we
try to clean up by putting back 'fd' and freeing 'ib'. The code uses
put_unused_fd() for the former which is wrong, as the file descriptor
was already published by fd_install() which gets called internally by
anon_inode_getfd().
This makes the error handling code leaving a half cleaned up file
descriptor table around and a partially destructed 'file' object,
allowing userland to play use-after-free tricks on us, by abusing
the still usable fd and making the code operate on a dangling
'file->private_data' pointer.
Instead of leaving the kernel in a partially corrupted state, don't
attempt to explicitly clean up and leave this to the process exit
path that'll release any still valid fds, including the one created
by the previous call to anon_inode_getfd(). Simply return -EFAULT to
indicate the error. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: ti: Fix missing sentinel for clk_div_table
_get_table_maxdiv() tries to access "clk_div_table" array out of bound
defined in phy-j721e-wiz.c. Add a sentinel entry to prevent
the following global-out-of-bounds error reported by enabling KASAN.
[ 9.552392] BUG: KASAN: global-out-of-bounds in _get_maxdiv+0xc0/0x148
[ 9.558948] Read of size 4 at addr ffff8000095b25a4 by task kworker/u4:1/38
[ 9.565926]
[ 9.567441] CPU: 1 PID: 38 Comm: kworker/u4:1 Not tainted 5.16.0-116492-gdaadb3bd0e8d-dirty #360
[ 9.576242] Hardware name: Texas Instruments J721e EVM (DT)
[ 9.581832] Workqueue: events_unbound deferred_probe_work_func
[ 9.587708] Call trace:
[ 9.590174] dump_backtrace+0x20c/0x218
[ 9.594038] show_stack+0x18/0x68
[ 9.597375] dump_stack_lvl+0x9c/0xd8
[ 9.601062] print_address_description.constprop.0+0x78/0x334
[ 9.606830] kasan_report+0x1f0/0x260
[ 9.610517] __asan_load4+0x9c/0xd8
[ 9.614030] _get_maxdiv+0xc0/0x148
[ 9.617540] divider_determine_rate+0x88/0x488
[ 9.622005] divider_round_rate_parent+0xc8/0x124
[ 9.626729] wiz_clk_div_round_rate+0x54/0x68
[ 9.631113] clk_core_determine_round_nolock+0x124/0x158
[ 9.636448] clk_core_round_rate_nolock+0x68/0x138
[ 9.641260] clk_core_set_rate_nolock+0x268/0x3a8
[ 9.645987] clk_set_rate+0x50/0xa8
[ 9.649499] cdns_sierra_phy_init+0x88/0x248
[ 9.653794] phy_init+0x98/0x108
[ 9.657046] cdns_pcie_enable_phy+0xa0/0x170
[ 9.661340] cdns_pcie_init_phy+0x250/0x2b0
[ 9.665546] j721e_pcie_probe+0x4b8/0x798
[ 9.669579] platform_probe+0x8c/0x108
[ 9.673350] really_probe+0x114/0x630
[ 9.677037] __driver_probe_device+0x18c/0x220
[ 9.681505] driver_probe_device+0xac/0x150
[ 9.685712] __device_attach_driver+0xec/0x170
[ 9.690178] bus_for_each_drv+0xf0/0x158
[ 9.694124] __device_attach+0x184/0x210
[ 9.698070] device_initial_probe+0x14/0x20
[ 9.702277] bus_probe_device+0xec/0x100
[ 9.706223] deferred_probe_work_func+0x124/0x180
[ 9.710951] process_one_work+0x4b0/0xbc0
[ 9.714983] worker_thread+0x74/0x5d0
[ 9.718668] kthread+0x214/0x230
[ 9.721919] ret_from_fork+0x10/0x20
[ 9.725520]
[ 9.727032] The buggy address belongs to the variable:
[ 9.732183] clk_div_table+0x24/0x440 |
| Mattermost Mobile Apps versions <=2.22.0 fail to properly handle specially crafted attachment names, which allows an attacker to crash the mobile app for any user who opened a channel containing the specially crafted attachment |
| Mattermost Mobile versions <= 2.22.0 fail to properly validate the style of proto supplied to an action's style in post.props.attachments, which allows an attacker to crash the mobile via crafted malicious input. |
| Mattermost Mobile versions <=2.22.0 fail to properly handle posts with attachments containing fields that cannot be cast to a String, which allows an attacker to cause the mobile to crash via creating and sending such a post to a channel. |
| TrueFiling is a collaborative, web-based electronic filing system where attorneys, paralegals, court reporters and self-represented filers collect public legal documentation into cases. TrueFiling is an entirely cloud-hosted application. Prior to version 3.1.112.19, TrueFiling trusted some client-controlled identifiers passed in URL requests to retrieve information. Platform users must self-register for an account, and once authenticated, could manipulate those identifiers to gain partial access to case information and the ability to partially change user access to case information. This vulnerability was addressed in version 3.1.112.19 and all instances were updated by 2024-11-08. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Ensure shadow stack is active before "getting" registers
The x86 shadow stack support has its own set of registers. Those registers
are XSAVE-managed, but they are "supervisor state components" which means
that userspace can not touch them with XSAVE/XRSTOR. It also means that
they are not accessible from the existing ptrace ABI for XSAVE state.
Thus, there is a new ptrace get/set interface for it.
The regset code that ptrace uses provides an ->active() handler in
addition to the get/set ones. For shadow stack this ->active() handler
verifies that shadow stack is enabled via the ARCH_SHSTK_SHSTK bit in the
thread struct. The ->active() handler is checked from some call sites of
the regset get/set handlers, but not the ptrace ones. This was not
understood when shadow stack support was put in place.
As a result, both the set/get handlers can be called with
XFEATURE_CET_USER in its init state, which would cause get_xsave_addr() to
return NULL and trigger a WARN_ON(). The ssp_set() handler luckily has an
ssp_active() check to avoid surprising the kernel with shadow stack
behavior when the kernel is not ready for it (ARCH_SHSTK_SHSTK==0). That
check just happened to avoid the warning.
But the ->get() side wasn't so lucky. It can be called with shadow stacks
disabled, triggering the warning in practice, as reported by Christina
Schimpe:
WARNING: CPU: 5 PID: 1773 at arch/x86/kernel/fpu/regset.c:198 ssp_get+0x89/0xa0
[...]
Call Trace:
<TASK>
? show_regs+0x6e/0x80
? ssp_get+0x89/0xa0
? __warn+0x91/0x150
? ssp_get+0x89/0xa0
? report_bug+0x19d/0x1b0
? handle_bug+0x46/0x80
? exc_invalid_op+0x1d/0x80
? asm_exc_invalid_op+0x1f/0x30
? __pfx_ssp_get+0x10/0x10
? ssp_get+0x89/0xa0
? ssp_get+0x52/0xa0
__regset_get+0xad/0xf0
copy_regset_to_user+0x52/0xc0
ptrace_regset+0x119/0x140
ptrace_request+0x13c/0x850
? wait_task_inactive+0x142/0x1d0
? do_syscall_64+0x6d/0x90
arch_ptrace+0x102/0x300
[...]
Ensure that shadow stacks are active in a thread before looking them up
in the XSAVE buffer. Since ARCH_SHSTK_SHSTK and user_ssp[SHSTK_EN] are
set at the same time, the active check ensures that there will be
something to find in the XSAVE buffer.
[ dhansen: changelog/subject tweaks ] |
