| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: fix use-after-free in store_modes()
store_modes() replaces a framebuffer's modelist with modes from userspace.
On success it frees the old modelist with fb_destroy_modelist(). Two
fields still point into that freed list.
One pointer is fb_display[i].mode, the mode a console is using.
fbcon_new_modelist() moves these pointers to the new list. It only does so
for consoles still mapped to the framebuffer. An unmapped console is
skipped and keeps its stale pointer. Unbinding fbcon, for example, sets
con2fb_map[i] to -1 but leaves fb_display[i].mode set. An
FBIOPUT_VSCREENINFO ioctl with FB_ACTIVATE_INV_MODE later reaches
fbcon_mode_deleted(). That function reads the stale fb_display[i].mode
through fb_mode_is_equal(). The read is a use-after-free.
The other pointer is fb_info->mode, the current mode. It is set through
the mode sysfs attribute. store_modes() does not update fb_info->mode, so
it is left pointing into the freed list. show_mode(), the attribute's read
handler, dereferences the stale fb_info->mode through mode_string(). The
read is a use-after-free.
Clear both pointers before freeing the list. Commit a1f305893074 ("fbcon:
Set fb_display[i]->mode to NULL when the mode is released") added the
helper fbcon_delete_modelist(). It clears every fb_display[i].mode that
points into a given list. So far it is called only from the unregister
path. Call it from store_modes() too, and set fb_info->mode to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
info->var, a framebuffer's current mode, is expected to have a matching
entry in info->modelist. var_to_display() relies on this and treats a
failed fb_match_mode() as "This should not happen". fb_set_var() keeps it
true by adding the mode to the list on every change, and
do_register_framebuffer() does the same at registration.
store_modes() replaces the modelist from userspace. fb_new_modelist()
validates the new modes but does not check that info->var still has a
match. It relies on fbcon_new_modelist() to re-point consoles, but that
only handles consoles mapped to the framebuffer. With fbcon unbound there
are none, so info->var is left describing a mode that is no longer in the
list.
A later console takeover runs var_to_display(), where fb_match_mode()
returns NULL and leaves fb_display[i].mode NULL. fbcon_switch() passes it
to display_to_var(), and fb_videomode_to_var() dereferences the NULL mode.
Keep the current mode in the list in fb_new_modelist(), the same way
fb_set_var() does. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: always recover the gpu
Previously, in case there was no more work to do, recover worker
wouldn't trigger recovery and would instead rely on the gpu going to
sleep and then resuming when more work is submitted.
Recover_worker will first increment the fence of the hung ring so, if
there's only one job submitted to a ring and that causes an hang, it
will early out.
There's no guarantee that the gpu will suspend and resume before more
work is submitted and if the gpu is in a hung state it will stay in that
state and probably trigger a timeout again.
Just stop checking and always recover the gpu.
Patchwork: https://patchwork.freedesktop.org/patch/704066/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add upper bound check for num_of_nodes
drm/amdkfd: Add upper bound check for num_of_nodes
in kfd_ioctl_get_process_apertures_new.
(cherry picked from commit 98ff46a5ea090c14d2cdb4f5b993b05d74f3949f) |
| A vulnerability was detected in yzhao062 pyod up to 3.6.1. Affected is the function pyod.utils.persistence.load of the file pyod/utils/persistence.py. Performing a manipulation of the argument path results in deserialization. The attack can be initiated remotely. Upgrading to version 3.6.2 is able to address this issue. It is recommended to apply a patch to fix this issue. The pull request to fix this issue requires some minor changes. |
| In PHP 8.0.X before 8.0.28, 8.1.X before 8.1.16 and 8.2.X before 8.2.3, password_verify() function may accept some invalid Blowfish hashes as valid. If such invalid hash ever ends up in the password database, it may lead to an application allowing any password for this entry as valid. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memory_hotplug: fix memory block reference leak on remove
Patch series "mm: Fix memory block leaks and locking", v2.
This series fixes two memory block device reference leaks and one locking
issue around the per-memory_block hwpoison counter.
This patch (of 2):
remove_memory_blocks_and_altmaps() looks up each memory block with
find_memory_block(), which acquires a reference to the memory block
device.
That reference is never dropped on this path, resulting in a leaked device
reference when removing memory blocks and their altmaps. Drop the
reference after retrieving mem->altmap and clearing mem->altmap, before
removing the memory block device. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: iosm: fix potential memory leaks in ipc_imem_init()
The memory allocated in ipc_protocol_init() is not freed on the error
paths that follow in ipc_imem_init(). Fix that by calling the
corresponding release function ipc_protocol_deinit() in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
phonet/pep: disable BH around forwarded sk_receive_skb()
The networking receive path is usually run from softirq context, but
protocols that take the socket lock may have packets stored in the
backlog and processed later from process context. In that case
release_sock() -> __release_sock() drops the slock with spin_unlock_bh()
and then calls sk->sk_backlog_rcv() with bottom halves enabled.
Typical sk_backlog_rcv handlers process the socket whose backlog is
being drained, so the BH state at entry is irrelevant for the slocks
they touch. pep_do_rcv() is different: when the inbound skb targets an
existing PEP pipe, it forwards the skb to a different *child* socket
via sk_receive_skb(). That helper takes the child slock with
bh_lock_sock_nested(), which is just spin_lock_nested() and assumes BH
is already off. The same child slock therefore ends up acquired with
BH on (process path) and with BH off (softirq path):
process context softirq context
--------------- ---------------
release_sock(listener) __netif_receive_skb()
__release_sock() phonet_rcv()
spin_unlock_bh() __sk_receive_skb(listener)
[BH now ENABLED] [BH already disabled]
sk_backlog_rcv: sk_backlog_rcv:
pep_do_rcv() pep_do_rcv()
sk_receive_skb(child) sk_receive_skb(child)
bh_lock_sock_nested(child) bh_lock_sock_nested(child)
=> SOFTIRQ-ON-W => IN-SOFTIRQ-W
Lockdep flags this as inconsistent lock state, and it can become a real
self-deadlock if a softirq on the same CPU tries to receive to the same
child socket while its slock is held in the BH-enabled path:
WARNING: inconsistent lock state
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
(slock-AF_PHONET/1){+.?.}-{3:3}, at: __sk_receive_skb+0x1cf/0x900
__sk_receive_skb net/core/sock.c:563
sk_receive_skb include/net/sock.h:2022 [inline]
pep_do_rcv net/phonet/pep.c:675
sk_backlog_rcv include/net/sock.h:1190
__release_sock net/core/sock.c:3216
release_sock net/core/sock.c:3815
pep_sock_accept net/phonet/pep.c:879
Wrap the forwarded sk_receive_skb() in local_bh_disable() /
local_bh_enable() so the child slock is always acquired with BH off.
local_bh_disable() nests safely on the softirq path.
Discovered via in-house syzkaller fuzzing; the same root cause also
on the linux-6.1.y syzbot dashboard as extid 44f0626dd6284f02663c.
Reproduced under KASAN + LOCKDEP + PROVE_LOCKING, reproducer:
https://pastebin.com/A3t8xzCR |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: advance loop vars in cfg80211_merge_profile()
cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS
profile that has been split across multiple consecutive MBSSID elements.
Its while-loop calls
cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem)
but never advances mbssid_elem or sub_elem inside the body. Each
iteration therefore searches for a continuation that follows the same
fixed pair; the helper returns the same next_mbssid; and the same
next_sub bytes are memcpy()'d into merged_ie at a growing offset until
the buffer fills.
Advance both mbssid_elem and sub_elem to the just-consumed continuation
so the next call to cfg80211_get_profile_continuation() searches for a
further continuation beyond it (or returns NULL when none exists).
A specially-crafted malicious beacon can take advantage of this bug
to cause the kernel to spend an excessive amount of time in
cfg80211_merge_profile (up to as much as 2ms per beacon received),
which could theoretically be abused in some way. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Do not call map->ops->elt_free() if elt_alloc() fails
In paths where tracing_map_elt_alloc() failed to allocate objects,
the map->ops->elt_alloc() call was never successful. In this case,
map->ops->elt_free() should not be called. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: tegra: fix pm_runtime leak on mutex_lock failure
If tegra_i2c_mutex_lock() fails, the function returns without calling
pm_runtime_put(), leaking the runtime PM reference acquired by the
preceding pm_runtime_get_sync(). This prevents the device from ever
entering runtime suspend.
Add the missing pm_runtime_put() before returning on lock failure. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: qup: fix error pointer deref after DMA setup failure
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to the clear the DMA channel pointers on setup failure to
avoid dereferencing an error pointer (or attempting to release a channel
a second time) on later probe errors or driver unbind.
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ep93xx: fix error pointer deref after DMA setup failure
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to the clear the DMA channel pointers on setup failure to
avoid dereferencing an error pointer on later probe errors or driver
unbind.
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: sprd: fix error pointer deref after DMA setup failure
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to check the dma.enabled flag before trying to release the DMA
channels also on late probe errors to avoid dereferencing an error
pointer (or attempting to release a channel a second time).
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch. |
| In the Linux kernel, the following vulnerability has been resolved:
kho: skip KHO for crash kernel
kho_fill_kimage() unconditionally populates the kimage with KHO
metadata for every kexec image type. When the image is a crash kernel,
this can be problematic as the crash kernel can run in a small reserved
region and the KHO scratch areas can sit outside it.
The crash kernel then faults during kho_memory_init() when it
tries phys_to_virt() on the KHO FDT address:
Unable to handle kernel paging request at virtual address xxxxxxxx
...
fdt_offset_ptr+...
fdt_check_node_offset_+...
fdt_first_property_offset+...
fdt_get_property_namelen_+...
fdt_getprop+...
kho_memory_init+...
mm_core_init+...
start_kernel+...
kho_locate_mem_hole() already skips KHO logic for KEXEC_TYPE_CRASH
images, but kho_fill_kimage() was missing the same guard. As
kho_fill_kimage() is the single point that populates image->kho.fdt
and image->kho.scratch, fixing it here is sufficient for both arm64
and x86 as the FDT and boot_params path are bailing out when these
fields are unset. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Check for NULL FF-A ID table while driver registration
The bus match callback assumes that every FF-A driver provides an
id_table and dereferences it unconditionally. Enforce that contract at
registration time so a buggy client driver cannot crash the bus during
match. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: integrator: Fix early initialization
Starting with commit bdb249fce9ad4 ("ARM: integrator: read counter using
syscon/regmap"), intcp_init_early calls syscon_regmap_lookup_by_compatible
which in turn calls of_syscon_register. This function allocates memory.
Since the memory management code has not been initialized at that time,
the call always fails. It either returns -ENOMEM or crashes as follows.
Unable to handle kernel NULL pointer dereference at virtual address 0000000c when read
[0000000c] *pgd=00000000
Internal error: Oops: 5 [#1] ARM
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc5-00026-g5fcc9bf84ee5 #1 PREEMPT
Hardware name: ARM Integrator/CP (Device Tree)
PC is at __kmalloc_cache_noprof+0xec/0x39c
LR is at __kmalloc_cache_noprof+0x34/0x39c
...
Call trace:
__kmalloc_cache_noprof from of_syscon_register+0x7c/0x310
of_syscon_register from device_node_get_regmap+0xa4/0xb0
device_node_get_regmap from intcp_init_early+0xc/0x40
intcp_init_early from start_kernel+0x60/0x688
start_kernel from 0x0
The crash is seen due to a dereferenced pointer which is not supposed to be
NULL but is NULL if the memory management subsystem has not been
initialized. The crash is not seen with all versions of gcc. Some versions
such as gcc 9.x apparently do not dereference the pointer, presumably if
tracing is disabled. The problem has been reproduced with gcc 10.x, 11.x,
and 13.x. Either case, if the crash is not seen, the call to
syscon_regmap_lookup_by_compatible returns -ENOMEM, and
sched_clock_register is never called.
Fix the problem by moving the early initialization code into the standard
machine initialization code. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file()
The trace event btrfs_sync_file() is called in an atomic context (all trace
events are) and its call to dput(), which is needed due to the call to
dget_parent(), can sleep, triggering a kernel splat.
This can be reproduced by enabling the trace event and running btrfs/056
from fstests for example. The splat shown in dmesg is the following:
[53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970
[53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io
[53.988] preempt_count: 2, expected: 0
[53.967] RCU nest depth: 0, expected: 0
[53.943] Preemption disabled at:
[53.944] [<0000000000000000>] 0x0
[54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full)
[54.070] Tainted: [W]=WARN
[54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[54.072] Call Trace:
[54.074] <TASK>
[54.076] dump_stack_lvl+0x56/0x80
[54.079] __might_resched.cold+0xd6/0x10f
[54.072] dput.part.0+0x24/0x110
[54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs]
[54.089] btrfs_sync_file+0x1ed/0x530 [btrfs]
[54.087] ? __handle_mm_fault+0x8ae/0xed0
[54.089] btrfs_do_write_iter+0x172/0x210 [btrfs]
[54.091] vfs_write+0x21f/0x450
[54.094] __x64_sys_pwrite64+0x8d/0xc0
[54.096] ? do_user_addr_fault+0x20c/0x670
[54.099] do_syscall_64+0x60/0xf20
[54.092] ? clear_bhb_loop+0x60/0xb0
[54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e
So stop using dget_parent() and dput() and access the parent dentry
directly as dentry->d_parent. This is also what ext4 is doing in
its equivalent trace event ext4_sync_file_enter(). |
| In the Linux kernel, the following vulnerability has been resolved:
test_kprobes: clear kprobes between test runs
Running the kprobes sanity tests twice makes all tests fail and
eventually crashes the kernel.
[root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run
...
# Totals: pass:5 fail:0 skip:0 total:5
ok 1 kprobes_test
[root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run
...
# test_kprobe: EXPECTATION FAILED at lib/tests/test_kprobes.c:64
Expected 0 == register_kprobe(&kp), but
register_kprobe(&kp) == -22 (0xffffffffffffffea)
...
Unable to handle kernel paging request ...
The testsuite defines several kprobes and kretprobes as static variables
that are preserved across test runs.
After register_kprobe and unregister_kprobe, a kprobe contains some
leftover data that must be cleared before the kprobe can be registered
again. The tests are setting symbol_name to define the probe location.
Address and flags must be cleared.
The existing code clears some of the probes between subsequent tests, but
not between two test runs. The leftover data from a previous test run
makes the registrations fail in the next run.
Move the cleanups for all kprobes into kprobes_test_init, this function
is called before each single test (including the first test of a test
run). |
