| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in ESM 11.6.10 allows unauthenticated access to the internal Snowservice API. This leads to improper handling of path traversal, insecure forwarding to an AJP backend without adequate validation, and lack of authentication for accessing internal API endpoints. |
| A vulnerability in ESM 11.6.10 allows unauthenticated access to the internal Snowservice API and enables remote code execution through command injection, executed as the root user. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: core: fix cleanup after dev_set_name()
If dev_set_name() fails, we leak nvmem->wp_gpio as the cleanup does not
put this. While a minimal fix for this would be to add the gpiod_put()
call, we can do better if we split device_register(), and use the
tested nvmem_release() cleanup code by initialising the device early,
and putting the device.
This results in a slightly larger fix, but results in clear code.
Note: this patch depends on "nvmem: core: initialise nvmem->id early"
and "nvmem: core: remove nvmem_config wp_gpio".
[Srini: Fixed subject line and error code handing with wp_gpio while applying.] |
| Under certain conditions SAP BusinessObjects Business Intelligence platform allows an attacker to access information which would otherwise be restricted.This has low impact on Confidentiality with no impact on Integrity and Availability of the application. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: fix handling and sanity checking of xattr_ids count
A Sysbot [1] corrupted filesystem exposes two flaws in the handling and
sanity checking of the xattr_ids count in the filesystem. Both of these
flaws cause computation overflow due to incorrect typing.
In the corrupted filesystem the xattr_ids value is 4294967071, which
stored in a signed variable becomes the negative number -225.
Flaw 1 (64-bit systems only):
The signed integer xattr_ids variable causes sign extension.
This causes variable overflow in the SQUASHFS_XATTR_*(A) macros. The
variable is first multiplied by sizeof(struct squashfs_xattr_id) where the
type of the sizeof operator is "unsigned long".
On a 64-bit system this is 64-bits in size, and causes the negative number
to be sign extended and widened to 64-bits and then become unsigned. This
produces the very large number 18446744073709548016 or 2^64 - 3600. This
number when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and
divided by SQUASHFS_METADATA_SIZE overflows and produces a length of 0
(stored in len).
Flaw 2 (32-bit systems only):
On a 32-bit system the integer variable is not widened by the unsigned
long type of the sizeof operator (32-bits), and the signedness of the
variable has no effect due it always being treated as unsigned.
The above corrupted xattr_ids value of 4294967071, when multiplied
overflows and produces the number 4294963696 or 2^32 - 3400. This number
when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and divided by
SQUASHFS_METADATA_SIZE overflows again and produces a length of 0.
The effect of the 0 length computation:
In conjunction with the corrupted xattr_ids field, the filesystem also has
a corrupted xattr_table_start value, where it matches the end of
filesystem value of 850.
This causes the following sanity check code to fail because the
incorrectly computed len of 0 matches the incorrect size of the table
reported by the superblock (0 bytes).
len = SQUASHFS_XATTR_BLOCK_BYTES(*xattr_ids);
indexes = SQUASHFS_XATTR_BLOCKS(*xattr_ids);
/*
* The computed size of the index table (len bytes) should exactly
* match the table start and end points
*/
start = table_start + sizeof(*id_table);
end = msblk->bytes_used;
if (len != (end - start))
return ERR_PTR(-EINVAL);
Changing the xattr_ids variable to be "usigned int" fixes the flaw on a
64-bit system. This relies on the fact the computation is widened by the
unsigned long type of the sizeof operator.
Casting the variable to u64 in the above macro fixes this flaw on a 32-bit
system.
It also means 64-bit systems do not implicitly rely on the type of the
sizeof operator to widen the computation.
[1] https://lore.kernel.org/lkml/000000000000cd44f005f1a0f17f@google.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
mm: multi-gen LRU: fix crash during cgroup migration
lru_gen_migrate_mm() assumes lru_gen_add_mm() runs prior to itself. This
isn't true for the following scenario:
CPU 1 CPU 2
clone()
cgroup_can_fork()
cgroup_procs_write()
cgroup_post_fork()
task_lock()
lru_gen_migrate_mm()
task_unlock()
task_lock()
lru_gen_add_mm()
task_unlock()
And when the above happens, kernel crashes because of linked list
corruption (mm_struct->lru_gen.list). |
| In the Linux kernel, the following vulnerability has been resolved:
can: isotp: split tx timer into transmission and timeout
The timer for the transmission of isotp PDUs formerly had two functions:
1. send two consecutive frames with a given time gap
2. monitor the timeouts for flow control frames and the echo frames
This led to larger txstate checks and potentially to a problem discovered
by syzbot which enabled the panic_on_warn feature while testing.
The former 'txtimer' function is split into 'txfrtimer' and 'txtimer'
to handle the two above functionalities with separate timer callbacks.
The two simplified timers now run in one-shot mode and make the state
transitions (especially with isotp_rcv_echo) better understandable. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Fix wrong check in update_parent_subparts_cpumask()
It was found that the check to see if a partition could use up all
the cpus from the parent cpuset in update_parent_subparts_cpumask()
was incorrect. As a result, it is possible to leave parent with no
effective cpu left even if there are tasks in the parent cpuset. This
can lead to system panic as reported in [1].
Fix this probem by updating the check to fail the enabling the partition
if parent's effective_cpus is a subset of the child's cpus_allowed.
Also record the error code when an error happens in update_prstate()
and add a test case where parent partition and child have the same cpu
list and parent has task. Enabling partition in the child will fail in
this case.
[1] https://www.spinics.net/lists/cgroups/msg36254.html |
| In the Linux kernel, the following vulnerability has been resolved:
block: ublk: extending queue_size to fix overflow
When validating drafted SPDK ublk target, in a case that
assigning large queue depth to multiqueue ublk device,
ublk target would run into a weird incorrect state. During
rounds of review and debug, An overflow bug was found
in ublk driver.
In ublk_cmd.h, UBLK_MAX_QUEUE_DEPTH is 4096 which means
each ublk queue depth can be set as large as 4096. But
when setting qd for a ublk device,
sizeof(struct ublk_queue) + depth * sizeof(struct ublk_io)
will be larger than 65535 if qd is larger than 2728.
Then queue_size is overflowed, and ublk_get_queue()
references a wrong pointer position. The wrong content of
ublk_queue elements will lead to out-of-bounds memory
access.
Extend queue_size in ublk_device as "unsigned int". |
| In the Linux kernel, the following vulnerability has been resolved:
fscache: Use wait_on_bit() to wait for the freeing of relinquished volume
The freeing of relinquished volume will wake up the pending volume
acquisition by using wake_up_bit(), however it is mismatched with
wait_var_event() used in fscache_wait_on_volume_collision() and it will
never wake up the waiter in the wait-queue because these two functions
operate on different wait-queues.
According to the implementation in fscache_wait_on_volume_collision(),
if the wake-up of pending acquisition is delayed longer than 20 seconds
(e.g., due to the delay of on-demand fd closing), the first
wait_var_event_timeout() will timeout and the following wait_var_event()
will hang forever as shown below:
FS-Cache: Potential volume collision new=00000024 old=00000022
......
INFO: task mount:1148 blocked for more than 122 seconds.
Not tainted 6.1.0-rc6+ #1
task:mount state:D stack:0 pid:1148 ppid:1
Call Trace:
<TASK>
__schedule+0x2f6/0xb80
schedule+0x67/0xe0
fscache_wait_on_volume_collision.cold+0x80/0x82
__fscache_acquire_volume+0x40d/0x4e0
erofs_fscache_register_volume+0x51/0xe0 [erofs]
erofs_fscache_register_fs+0x19c/0x240 [erofs]
erofs_fc_fill_super+0x746/0xaf0 [erofs]
vfs_get_super+0x7d/0x100
get_tree_nodev+0x16/0x20
erofs_fc_get_tree+0x20/0x30 [erofs]
vfs_get_tree+0x24/0xb0
path_mount+0x2fa/0xa90
do_mount+0x7c/0xa0
__x64_sys_mount+0x8b/0xe0
do_syscall_64+0x30/0x60
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Considering that wake_up_bit() is more selective, so fix it by using
wait_on_bit() instead of wait_var_event() to wait for the freeing of
relinquished volume. In addition because waitqueue_active() is used in
wake_up_bit() and clear_bit() doesn't imply any memory barrier, use
clear_and_wake_up_bit() to add the missing memory barrier between
cursor->flags and waitqueue_active(). |
| A vulnerability exists in the QuickJS engine's BigInt string parsing logic (js_bigint_from_string) when attempting to create a BigInt from a string with an excessively large number of digits.
The function calculates the necessary number of bits (n_bits) required to store the BigInt using the formula:
$$\text{n\_bits} = (\text{n\_digits} \times 27 + 7) / 8 \quad (\text{for radix 10})$$
* For large input strings (e.g., $79,536,432$ digits or more for base 10), the intermediate calculation $(\text{n\_digits} \times 27 + 7)$ exceeds the maximum value of a standard signed 32-bit integer, resulting in an Integer Overflow.
* The resulting n_bits value becomes unexpectedly small or even negative due to this wrap-around.
* This flawed n_bits is then used to compute n_limbs, the number of memory "limbs" needed for the BigInt object. Since n_bits is too small, the calculated n_limbs is also significantly underestimated.
* The function proceeds to allocate a JSBigInt object using this underestimated n_limbs.
* When the function later attempts to write the actual BigInt data into the allocated object, the small buffer size is quickly exceeded, leading to a Heap Out-of-Bounds Write as data is written past the end of the allocated r->tab array. |
| A stored cross-site scripting (XSS) vulnerability exists in chatwoot/chatwoot versions 3.0.0 to 3.5.1. This vulnerability allows an admin user to inject malicious JavaScript code via the dashboard app settings, which can then be executed by another admin user when they access the affected dashboard app. The issue is fixed in version 3.5.2. |
| Internet Starter, one of SoftCOM iKSORIS system modules, is vulnerable to Reflected XSS (Cross-site Scripting) attacks. An attacker might trick a user into filling a login form with a malicious script, what causes the script to run in user's context.
This vulnerability has been patched in version 79.0 |
| Internet Starter, one of SoftCOM iKSORIS system modules, is vulnerable to Stored XSS (Cross-site Scripting) attacks. An attacker might trick a user into filling a form designed for changing user's data with a malicious script, what causes the script to run in user's context.
This vulnerability has been patched in version 79.0 |
| Internet Starter, one of SoftCOM iKSORIS system modules, is vulnerable to Reflected XSS (Cross-site Scripting) attacks. An attacker might trick a user into filling a form designed for adding users with a malicious script, what causes the script to run in user's context.
This vulnerability has been patched in version 79.0 |
| Internet Starter, one of SoftCOM iKSORIS system modules, is vulnerable to Reflected XSS (Cross-site Scripting) attacks. Using a functionality of creating new form fields one creates new parameters vulnerable to XSS attacks. A user tricked into filling such a form with a malicious script will run the code in their's context.
This vulnerability has been patched in version 79.0 |
| Internet Starter, one of SoftCOM iKSORIS system modules, is vulnerable to client-side Denial of Servise (DoS) attacks. An attacker might trick a user into using an URL with a d parameter set to an unhandled value. All the subsequent requests will not be accepted as the server returns an error message. Since this parameter is sent as part of a session cookie, the issue persists until the session expires or the user deletes cookies manually.
Similar effect might be achieved when a user tries to change platform language to an unimplemented one.
This vulnerability has been patched in version 79.0 |
| Internet Starter, one of SoftCOM iKSORIS system modules, is vulnerable to Open Redirect attacks by including base64 encoded URLs in the target parameter sent in a POST request to one of the endpoints.
This vulnerability has been patched in version 79.0 |
| In the Linux kernel, the following vulnerability has been resolved:
dpll: fix xa_alloc_cyclic() error handling
In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will
be returned, which will cause IS_ERR() to be false. Which can lead to
dereference not allocated pointer (pin).
Fix it by checking if err is lower than zero.
This wasn't found in real usecase, only noticed. Credit to Pierre. |
| Internet Starter, one of SoftCOM iKSORIS system modules, is vulnerable to Reflected XSS (Cross-site Scripting) attacks. An attacker might trick a user into filling a form designed for resetting user's password with a malicious script, what causes the script to run in user's context.
This vulnerability has been patched in version 79.0 |
