| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error
This patch addresses a race condition for an ODP MR that can result in a
CQE with an error on the UMR QP.
During the __mlx5_ib_dereg_mr() flow, the following sequence of calls
occurs:
mlx5_revoke_mr()
mlx5r_umr_revoke_mr()
mlx5r_umr_post_send_wait()
At this point, the lkey is freed from the hardware's perspective.
However, concurrently, mlx5_ib_invalidate_range() might be triggered by
another task attempting to invalidate a range for the same freed lkey.
This task will:
- Acquire the umem_odp->umem_mutex lock.
- Call mlx5r_umr_update_xlt() on the UMR QP.
- Since the lkey has already been freed, this can lead to a CQE error,
causing the UMR QP to enter an error state [1].
To resolve this race condition, the umem_odp->umem_mutex lock is now also
acquired as part of the mlx5_revoke_mr() scope. Upon successful revoke,
we set umem_odp->private which points to that MR to NULL, preventing any
further invalidation attempts on its lkey.
[1] From dmesg:
infiniband rocep8s0f0: dump_cqe:277:(pid 0): WC error: 6, Message: memory bind operation error
cqe_dump: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000030: 00 00 00 00 08 00 78 06 25 00 11 b9 00 0e dd d2
WARNING: CPU: 15 PID: 1506 at drivers/infiniband/hw/mlx5/umr.c:394 mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib]
Modules linked in: ip6table_mangle ip6table_natip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core
CPU: 15 UID: 0 PID: 1506 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1626
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib]
[..]
Call Trace:
<TASK>
mlx5r_umr_update_xlt+0x23c/0x3e0 [mlx5_ib]
mlx5_ib_invalidate_range+0x2e1/0x330 [mlx5_ib]
__mmu_notifier_invalidate_range_start+0x1e1/0x240
zap_page_range_single+0xf1/0x1a0
madvise_vma_behavior+0x677/0x6e0
do_madvise+0x1a2/0x4b0
__x64_sys_madvise+0x25/0x30
do_syscall_64+0x6b/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: bail out when failed to load fw in psp_init_cap_microcode()
In function psp_init_cap_microcode(), it should bail out when failed to
load firmware, otherwise it may cause invalid memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Validate the persistent meta data subbuf array
The meta data for a mapped ring buffer contains an array of indexes of all
the subbuffers. The first entry is the reader page, and the rest of the
entries lay out the order of the subbuffers in how the ring buffer link
list is to be created.
The validator currently makes sure that all the entries are within the
range of 0 and nr_subbufs. But it does not check if there are any
duplicates.
While working on the ring buffer, I corrupted this array, where I added
duplicates. The validator did not catch it and created the ring buffer
link list on top of it. Luckily, the corruption was only that the reader
page was also in the writer path and only presented corrupted data but did
not crash the kernel. But if there were duplicates in the writer side,
then it could corrupt the ring buffer link list and cause a crash.
Create a bitmask array with the size of the number of subbuffers. Then
clear it. When walking through the subbuf array checking to see if the
entries are within the range, test if its bit is already set in the
subbuf_mask. If it is, then there is duplicates and fail the validation.
If not, set the corresponding bit and continue. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix incorrect autogroup migration detection
scx_move_task() is called from sched_move_task() and tells the BPF scheduler
that cgroup migration is being committed. sched_move_task() is used by both
cgroup and autogroup migrations and scx_move_task() tried to filter out
autogroup migrations by testing the destination cgroup and PF_EXITING but
this is not enough. In fact, without explicitly tagging the thread which is
doing the cgroup migration, there is no good way to tell apart
scx_move_task() invocations for racing migration to the root cgroup and an
autogroup migration.
This led to scx_move_task() incorrectly ignoring a migration from non-root
cgroup to an autogroup of the root cgroup triggering the following warning:
WARNING: CPU: 7 PID: 1 at kernel/sched/ext.c:3725 scx_cgroup_can_attach+0x196/0x340
...
Call Trace:
<TASK>
cgroup_migrate_execute+0x5b1/0x700
cgroup_attach_task+0x296/0x400
__cgroup_procs_write+0x128/0x140
cgroup_procs_write+0x17/0x30
kernfs_fop_write_iter+0x141/0x1f0
vfs_write+0x31d/0x4a0
__x64_sys_write+0x72/0xf0
do_syscall_64+0x82/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix it by adding an argument to sched_move_task() that indicates whether the
moving is for a cgroup or autogroup migration. After the change,
scx_move_task() is called only for cgroup migrations and renamed to
scx_cgroup_move_task(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels
Some lwtunnels have a dst cache for post-transformation dst.
If the packet destination did not change we may end up recording
a reference to the lwtunnel in its own cache, and the lwtunnel
state will never be freed.
Discovered by the ioam6.sh test, kmemleak was recently fixed
to catch per-cpu memory leaks. I'm not sure if rpl and seg6
can actually hit this, but in principle I don't see why not. |
| Opencast is free and open source software for automated video capture and distribution. First noticed in Opencast 13 and 14, Opencast's Elasticsearch integration may generate syntactically invalid Elasticsearch queries in relation to previously acceptable search queries. From Opencast version 11.4 and newer, Elasticsearch queries are retried a configurable number of times in the case of error to handle temporary losses of connection to Elasticsearch. These invalid queries would fail, causing the retry mechanism to begin requerying with the same syntactically invalid query immediately, in an infinite loop. This causes a massive increase in log size which can in some cases cause a denial of service due to disk exhaustion.
Opencast 13.10 and Opencast 14.3 contain patches which address the base issue, with Opencast 16.7 containing changes which harmonize the search behaviour between the admin UI and external API. Users are strongly recommended to upgrade as soon as possible if running versions prior to 13.10 or 14.3. While the relevant endpoints require (by default) `ROLE_ADMIN` or `ROLE_API_SERIES_VIEW`, the problem queries are otherwise innocuous. This issue could be easily triggered by normal administrative work on an affected Opencast system. Those who run a version newer than 13.10 and 14.3 and see different results when searching in their admin UI vs your external API or LMS, may resolve the issue by upgrading to 16.7. No known workarounds for the vulnerability are available. |
| In Samsung Mobile Processor and Wearable Processor Exynos 980, 850, 1280, 1330, 1380, 1480, 1580, W920, W930, and W1000, there is an improper access control vulnerability related to a log file. |
| An issue was discovered in L2 in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 980, 990, 850, 1080, 2100, 1280, 2200, 1330, 1380, 1480, 9110, W920, W930, Modem 5123, and Modem 5300. Incorrect handling of RLC AM PDUs leads to a Denial of Service. |
| OpenTelemetry-Go Contrib is a collection of third-party packages for OpenTelemetry-Go. Starting in version 0.37.0 and prior to version 0.46.0, the grpc Unary Server Interceptor out of the box adds labels `net.peer.sock.addr` and `net.peer.sock.port` that have unbound cardinality. It leads to the server's potential memory exhaustion when many malicious requests are sent. An attacker can easily flood the peer address and port for requests. Version 0.46.0 contains a fix for this issue. As a workaround to stop being affected, a view removing the attributes can be used. The other possibility is to disable grpc metrics instrumentation by passing `otelgrpc.WithMeterProvider` option with `noop.NewMeterProvider`. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix legacy client tracking initialization
Get rid of the nfsd4_legacy_tracking_ops->init() call in
check_for_legacy_methods(). That will be handled in the caller
(nfsd4_client_tracking_init()). Otherwise, we'll wind up calling
nfsd4_legacy_tracking_ops->init() twice, and the second time we'll
trigger the BUG_ON() in nfsd4_init_recdir(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm: zswap: fix crypto_free_acomp() deadlock in zswap_cpu_comp_dead()
Currently, zswap_cpu_comp_dead() calls crypto_free_acomp() while holding
the per-CPU acomp_ctx mutex. crypto_free_acomp() then holds scomp_lock
(through crypto_exit_scomp_ops_async()).
On the other hand, crypto_alloc_acomp_node() holds the scomp_lock (through
crypto_scomp_init_tfm()), and then allocates memory. If the allocation
results in reclaim, we may attempt to hold the per-CPU acomp_ctx mutex.
The above dependencies can cause an ABBA deadlock. For example in the
following scenario:
(1) Task A running on CPU #1:
crypto_alloc_acomp_node()
Holds scomp_lock
Enters reclaim
Reads per_cpu_ptr(pool->acomp_ctx, 1)
(2) Task A is descheduled
(3) CPU #1 goes offline
zswap_cpu_comp_dead(CPU #1)
Holds per_cpu_ptr(pool->acomp_ctx, 1))
Calls crypto_free_acomp()
Waits for scomp_lock
(4) Task A running on CPU #2:
Waits for per_cpu_ptr(pool->acomp_ctx, 1) // Read on CPU #1
DEADLOCK
Since there is no requirement to call crypto_free_acomp() with the per-CPU
acomp_ctx mutex held in zswap_cpu_comp_dead(), move it after the mutex is
unlocked. Also move the acomp_request_free() and kfree() calls for
consistency and to avoid any potential sublte locking dependencies in the
future.
With this, only setting acomp_ctx fields to NULL occurs with the mutex
held. This is similar to how zswap_cpu_comp_prepare() only initializes
acomp_ctx fields with the mutex held, after performing all allocations
before holding the mutex.
Opportunistically, move the NULL check on acomp_ctx so that it takes place
before the mutex dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vimc: skip .s_stream() for stopped entities
Syzbot reported [1] a warning prompted by a check in call_s_stream()
that checks whether .s_stream() operation is warranted for unstarted
or stopped subdevs.
Add a simple fix in vimc_streamer_pipeline_terminate() ensuring that
entities skip a call to .s_stream() unless they have been previously
properly started.
[1] Syzbot report:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5933 at drivers/media/v4l2-core/v4l2-subdev.c:460 call_s_stream+0x2df/0x350 drivers/media/v4l2-core/v4l2-subdev.c:460
Modules linked in:
CPU: 0 UID: 0 PID: 5933 Comm: syz-executor330 Not tainted 6.13.0-rc2-syzkaller-00362-g2d8308bf5b67 #0
...
Call Trace:
<TASK>
vimc_streamer_pipeline_terminate+0x218/0x320 drivers/media/test-drivers/vimc/vimc-streamer.c:62
vimc_streamer_pipeline_init drivers/media/test-drivers/vimc/vimc-streamer.c:101 [inline]
vimc_streamer_s_stream+0x650/0x9a0 drivers/media/test-drivers/vimc/vimc-streamer.c:203
vimc_capture_start_streaming+0xa1/0x130 drivers/media/test-drivers/vimc/vimc-capture.c:256
vb2_start_streaming+0x15f/0x5a0 drivers/media/common/videobuf2/videobuf2-core.c:1789
vb2_core_streamon+0x2a7/0x450 drivers/media/common/videobuf2/videobuf2-core.c:2348
vb2_streamon drivers/media/common/videobuf2/videobuf2-v4l2.c:875 [inline]
vb2_ioctl_streamon+0xf4/0x170 drivers/media/common/videobuf2/videobuf2-v4l2.c:1118
__video_do_ioctl+0xaf0/0xf00 drivers/media/v4l2-core/v4l2-ioctl.c:3122
video_usercopy+0x4d2/0x1620 drivers/media/v4l2-core/v4l2-ioctl.c:3463
v4l2_ioctl+0x1ba/0x250 drivers/media/v4l2-core/v4l2-dev.c:366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f2b85c01b19
... |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: add check read-only before txBeginAnon() call
Added a read-only check before calling `txBeginAnon` in `extAlloc`
and `extRecord`. This prevents modification attempts on a read-only
mounted filesystem, avoiding potential errors or crashes.
Call trace:
txBeginAnon+0xac/0x154
extAlloc+0xe8/0xdec fs/jfs/jfs_extent.c:78
jfs_get_block+0x340/0xb98 fs/jfs/inode.c:248
__block_write_begin_int+0x580/0x166c fs/buffer.c:2128
__block_write_begin fs/buffer.c:2177 [inline]
block_write_begin+0x98/0x11c fs/buffer.c:2236
jfs_write_begin+0x44/0x88 fs/jfs/inode.c:299 |
| Improper authorization in Smart Switch installed on non-Samsung Device prior to version 3.7.64.10 allows local attackers to read data with the privilege of Smart Switch. User interaction is required for triggering this vulnerability. |
| HCL Connections is vulnerable to a cross-site scripting attack where an attacker may leverage this issue to execute arbitrary script code in the browser of an unsuspecting user which leads to executing malicious script code. This may let the attacker steal cookie-based authentication credentials and comprise user's account then launch other attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Don't skip on Stopped - Length Invalid
Up until commit d56b0b2ab142 ("usb: xhci: ensure skipped isoc TDs are
returned when isoc ring is stopped") in v6.11, the driver didn't skip
missed isochronous TDs when handling Stoppend and Stopped - Length
Invalid events. Instead, it erroneously cleared the skip flag, which
would cause the ring to get stuck, as future events won't match the
missed TD which is never removed from the queue until it's cancelled.
This buggy logic seems to have been in place substantially unchanged
since the 3.x series over 10 years ago, which probably speaks first
and foremost about relative rarity of this case in normal usage, but
by the spec I see no reason why it shouldn't be possible.
After d56b0b2ab142, TDs are immediately skipped when handling those
Stopped events. This poses a potential problem in case of Stopped -
Length Invalid, which occurs either on completed TDs (likely already
given back) or Link and No-Op TRBs. Such event won't be recognized
as matching any TD (unless it's the rare Link TRB inside a TD) and
will result in skipping all pending TDs, giving them back possibly
before they are done, risking isoc data loss and maybe UAF by HW.
As a compromise, don't skip and don't clear the skip flag on this
kind of event. Then the next event will skip missed TDs. A downside
of not handling Stopped - Length Invalid on a Link inside a TD is
that if the TD is cancelled, its actual length will not be updated
to account for TRBs (silently) completed before the TD was stopped.
I had no luck producing this sequence of completion events so there
is no compelling demonstration of any resulting disaster. It may be
a very rare, obscure condition. The sole motivation for this patch
is that if such unlikely event does occur, I'd rather risk reporting
a cancelled partially done isoc frame as empty than gamble with UAF.
This will be fixed more properly by looking at Stopped event's TRB
pointer when making skipping decisions, but such rework is unlikely
to be backported to v6.12, which will stay around for a few years. |
| Delinea Secret Server before 11.7.000001 allows attackers to bypass authentication via the SOAP API in SecretServer/webservices/SSWebService.asmx. This is related to a hardcoded key, the use of the integer 2 for the Admin user, and removal of the oauthExpirationId attribute. |
| HCL Connections is vulnerable to a broken access control vulnerability that may allow an unauthorized user to update data in certain scenarios. |
| SAP Business Warehouse - Business Planning and
Simulation application does not sufficiently encode user-controlled inputs,
resulting in Stored Cross-Site Scripting (XSS) vulnerability. This
vulnerability allows users to modify website content and on successful
exploitation, an attacker can cause low impact to the confidentiality and
integrity of the application. |
| Due to a Protection Mechanism Failure in SAP
NetWeaver Application Server for ABAP and ABAP Platform, a developer can bypass
the configured malware scanner API because of a programming error. This leads
to a low impact on the application's confidentiality, integrity, and
availability. |
