| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix f2fs_bug_on when uninstalling filesystem call f2fs_evict_inode.
creating a large files during checkpoint disable until it runs out of
space and then delete it, then remount to enable checkpoint again, and
then unmount the filesystem triggers the f2fs_bug_on as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/inode.c:896!
CPU: 2 UID: 0 PID: 1286 Comm: umount Not tainted 6.11.0-rc7-dirty #360
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:f2fs_evict_inode+0x58c/0x610
Call Trace:
__die_body+0x15/0x60
die+0x33/0x50
do_trap+0x10a/0x120
f2fs_evict_inode+0x58c/0x610
do_error_trap+0x60/0x80
f2fs_evict_inode+0x58c/0x610
exc_invalid_op+0x53/0x60
f2fs_evict_inode+0x58c/0x610
asm_exc_invalid_op+0x16/0x20
f2fs_evict_inode+0x58c/0x610
evict+0x101/0x260
dispose_list+0x30/0x50
evict_inodes+0x140/0x190
generic_shutdown_super+0x2f/0x150
kill_block_super+0x11/0x40
kill_f2fs_super+0x7d/0x140
deactivate_locked_super+0x2a/0x70
cleanup_mnt+0xb3/0x140
task_work_run+0x61/0x90
The root cause is: creating large files during disable checkpoint
period results in not enough free segments, so when writing back root
inode will failed in f2fs_enable_checkpoint. When umount the file
system after enabling checkpoint, the root inode is dirty in
f2fs_evict_inode function, which triggers BUG_ON. The steps to
reproduce are as follows:
dd if=/dev/zero of=f2fs.img bs=1M count=55
mount f2fs.img f2fs_dir -o checkpoint=disable:10%
dd if=/dev/zero of=big bs=1M count=50
sync
rm big
mount -o remount,checkpoint=enable f2fs_dir
umount f2fs_dir
Let's redirty inode when there is not free segments during checkpoint
is disable. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix sleeping in atomic context for PREEMPT_RT
Commit bab1c299f3945ffe79 ("LoongArch: Fix sleeping in atomic context in
setup_tlb_handler()") changes the gfp flag from GFP_KERNEL to GFP_ATOMIC
for alloc_pages_node(). However, for PREEMPT_RT kernels we can still get
a "sleeping in atomic context" error:
[ 0.372259] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 0.372266] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
[ 0.372268] preempt_count: 1, expected: 0
[ 0.372270] RCU nest depth: 1, expected: 1
[ 0.372272] 3 locks held by swapper/1/0:
[ 0.372274] #0: 900000000c9f5e60 (&pcp->lock){+.+.}-{3:3}, at: get_page_from_freelist+0x524/0x1c60
[ 0.372294] #1: 90000000087013b8 (rcu_read_lock){....}-{1:3}, at: rt_spin_trylock+0x50/0x140
[ 0.372305] #2: 900000047fffd388 (&zone->lock){+.+.}-{3:3}, at: __rmqueue_pcplist+0x30c/0xea0
[ 0.372314] irq event stamp: 0
[ 0.372316] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[ 0.372322] hardirqs last disabled at (0): [<9000000005947320>] copy_process+0x9c0/0x26e0
[ 0.372329] softirqs last enabled at (0): [<9000000005947320>] copy_process+0x9c0/0x26e0
[ 0.372335] softirqs last disabled at (0): [<0000000000000000>] 0x0
[ 0.372341] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.12.0-rc7+ #1891
[ 0.372346] Hardware name: Loongson Loongson-3A5000-7A1000-1w-CRB/Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.0-prebeta9 10/21/2022
[ 0.372349] Stack : 0000000000000089 9000000005a0db9c 90000000071519c8 9000000100388000
[ 0.372486] 900000010038b890 0000000000000000 900000010038b898 9000000007e53788
[ 0.372492] 900000000815bcc8 900000000815bcc0 900000010038b700 0000000000000001
[ 0.372498] 0000000000000001 4b031894b9d6b725 00000000055ec000 9000000100338fc0
[ 0.372503] 00000000000000c4 0000000000000001 000000000000002d 0000000000000003
[ 0.372509] 0000000000000030 0000000000000003 00000000055ec000 0000000000000003
[ 0.372515] 900000000806d000 9000000007e53788 00000000000000b0 0000000000000004
[ 0.372521] 0000000000000000 0000000000000000 900000000c9f5f10 0000000000000000
[ 0.372526] 90000000076f12d8 9000000007e53788 9000000005924778 0000000000000000
[ 0.372532] 00000000000000b0 0000000000000004 0000000000000000 0000000000070000
[ 0.372537] ...
[ 0.372540] Call Trace:
[ 0.372542] [<9000000005924778>] show_stack+0x38/0x180
[ 0.372548] [<90000000071519c4>] dump_stack_lvl+0x94/0xe4
[ 0.372555] [<900000000599b880>] __might_resched+0x1a0/0x260
[ 0.372561] [<90000000071675cc>] rt_spin_lock+0x4c/0x140
[ 0.372565] [<9000000005cbb768>] __rmqueue_pcplist+0x308/0xea0
[ 0.372570] [<9000000005cbed84>] get_page_from_freelist+0x564/0x1c60
[ 0.372575] [<9000000005cc0d98>] __alloc_pages_noprof+0x218/0x1820
[ 0.372580] [<900000000593b36c>] tlb_init+0x1ac/0x298
[ 0.372585] [<9000000005924b74>] per_cpu_trap_init+0x114/0x140
[ 0.372589] [<9000000005921964>] cpu_probe+0x4e4/0xa60
[ 0.372592] [<9000000005934874>] start_secondary+0x34/0xc0
[ 0.372599] [<900000000715615c>] smpboot_entry+0x64/0x6c
This is because in PREEMPT_RT kernels normal spinlocks are replaced by
rt spinlocks and rt_spin_lock() will cause sleeping. Fix it by disabling
NUMA optimization completely for PREEMPT_RT kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free in btrfs_encoded_read_endio()
Shinichiro reported the following use-after free that sometimes is
happening in our CI system when running fstests' btrfs/284 on a TCMU
runner device:
BUG: KASAN: slab-use-after-free in lock_release+0x708/0x780
Read of size 8 at addr ffff888106a83f18 by task kworker/u80:6/219
CPU: 8 UID: 0 PID: 219 Comm: kworker/u80:6 Not tainted 6.12.0-rc6-kts+ #15
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
? lock_release+0x708/0x780
print_report+0x174/0x505
? lock_release+0x708/0x780
? __virt_addr_valid+0x224/0x410
? lock_release+0x708/0x780
kasan_report+0xda/0x1b0
? lock_release+0x708/0x780
? __wake_up+0x44/0x60
lock_release+0x708/0x780
? __pfx_lock_release+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? lock_is_held_type+0x9a/0x110
_raw_spin_unlock_irqrestore+0x1f/0x60
__wake_up+0x44/0x60
btrfs_encoded_read_endio+0x14b/0x190 [btrfs]
btrfs_check_read_bio+0x8d9/0x1360 [btrfs]
? lock_release+0x1b0/0x780
? trace_lock_acquire+0x12f/0x1a0
? __pfx_btrfs_check_read_bio+0x10/0x10 [btrfs]
? process_one_work+0x7e3/0x1460
? lock_acquire+0x31/0xc0
? process_one_work+0x7e3/0x1460
process_one_work+0x85c/0x1460
? __pfx_process_one_work+0x10/0x10
? assign_work+0x16c/0x240
worker_thread+0x5e6/0xfc0
? __pfx_worker_thread+0x10/0x10
kthread+0x2c3/0x3a0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 3661:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
btrfs_encoded_read_regular_fill_pages+0x16c/0x6d0 [btrfs]
send_extent_data+0xf0f/0x24a0 [btrfs]
process_extent+0x48a/0x1830 [btrfs]
changed_cb+0x178b/0x2ea0 [btrfs]
btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
_btrfs_ioctl_send+0x117/0x330 [btrfs]
btrfs_ioctl+0x184a/0x60a0 [btrfs]
__x64_sys_ioctl+0x12e/0x1a0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 3661:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x70
__kasan_slab_free+0x4f/0x70
kfree+0x143/0x490
btrfs_encoded_read_regular_fill_pages+0x531/0x6d0 [btrfs]
send_extent_data+0xf0f/0x24a0 [btrfs]
process_extent+0x48a/0x1830 [btrfs]
changed_cb+0x178b/0x2ea0 [btrfs]
btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
_btrfs_ioctl_send+0x117/0x330 [btrfs]
btrfs_ioctl+0x184a/0x60a0 [btrfs]
__x64_sys_ioctl+0x12e/0x1a0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The buggy address belongs to the object at ffff888106a83f00
which belongs to the cache kmalloc-rnd-07-96 of size 96
The buggy address is located 24 bytes inside of
freed 96-byte region [ffff888106a83f00, ffff888106a83f60)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888106a83800 pfn:0x106a83
flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
page_type: f5(slab)
raw: 0017ffffc0000000 ffff888100053680 ffffea0004917200 0000000000000004
raw: ffff888106a83800 0000000080200019 00000001f5000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888106a83e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888106a83e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
>ffff888106a83f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888106a83f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888106a84000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Further analyzing the trace and
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: amphion: Set video drvdata before register video device
The video drvdata should be set before the video device is registered,
otherwise video_drvdata() may return NULL in the open() file ops, and led
to oops. |
| In the Linux kernel, the following vulnerability has been resolved:
media: imx-jpeg: Set video drvdata before register video device
The video drvdata should be set before the video device is registered,
otherwise video_drvdata() may return NULL in the open() file ops, and led
to oops. |
| In the Linux kernel, the following vulnerability has been resolved:
media: imx-jpeg: Ensure power suppliers be suspended before detach them
The power suppliers are always requested to suspend asynchronously,
dev_pm_domain_detach() requires the caller to ensure proper
synchronization of this function with power management callbacks.
otherwise the detach may led to kernel panic, like below:
[ 1457.107934] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
[ 1457.116777] Mem abort info:
[ 1457.119589] ESR = 0x0000000096000004
[ 1457.123358] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1457.128692] SET = 0, FnV = 0
[ 1457.131764] EA = 0, S1PTW = 0
[ 1457.134920] FSC = 0x04: level 0 translation fault
[ 1457.139812] Data abort info:
[ 1457.142707] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 1457.148196] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 1457.153256] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1457.158563] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001138b6000
[ 1457.165000] [0000000000000040] pgd=0000000000000000, p4d=0000000000000000
[ 1457.171792] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 1457.178045] Modules linked in: v4l2_jpeg wave6_vpu_ctrl(-) [last unloaded: mxc_jpeg_encdec]
[ 1457.186383] CPU: 0 PID: 51938 Comm: kworker/0:3 Not tainted 6.6.36-gd23d64eea511 #66
[ 1457.194112] Hardware name: NXP i.MX95 19X19 board (DT)
[ 1457.199236] Workqueue: pm pm_runtime_work
[ 1457.203247] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1457.210188] pc : genpd_runtime_suspend+0x20/0x290
[ 1457.214886] lr : __rpm_callback+0x48/0x1d8
[ 1457.218968] sp : ffff80008250bc50
[ 1457.222270] x29: ffff80008250bc50 x28: 0000000000000000 x27: 0000000000000000
[ 1457.229394] x26: 0000000000000000 x25: 0000000000000008 x24: 00000000000f4240
[ 1457.236518] x23: 0000000000000000 x22: ffff00008590f0e4 x21: 0000000000000008
[ 1457.243642] x20: ffff80008099c434 x19: ffff00008590f000 x18: ffffffffffffffff
[ 1457.250766] x17: 5300326563697665 x16: 645f676e696c6f6f x15: 63343a6d726f6674
[ 1457.257890] x14: 0000000000000004 x13: 00000000000003a4 x12: 0000000000000002
[ 1457.265014] x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff80008250bbb0
[ 1457.272138] x8 : ffff000092937200 x7 : ffff0003fdf6af80 x6 : 0000000000000000
[ 1457.279262] x5 : 00000000410fd050 x4 : 0000000000200000 x3 : 0000000000000000
[ 1457.286386] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008590f000
[ 1457.293510] Call trace:
[ 1457.295946] genpd_runtime_suspend+0x20/0x290
[ 1457.300296] __rpm_callback+0x48/0x1d8
[ 1457.304038] rpm_callback+0x6c/0x78
[ 1457.307515] rpm_suspend+0x10c/0x570
[ 1457.311077] pm_runtime_work+0xc4/0xc8
[ 1457.314813] process_one_work+0x138/0x248
[ 1457.318816] worker_thread+0x320/0x438
[ 1457.322552] kthread+0x110/0x114
[ 1457.325767] ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
media: ts2020: fix null-ptr-deref in ts2020_probe()
KASAN reported a null-ptr-deref issue when executing the following
command:
# echo ts2020 0x20 > /sys/bus/i2c/devices/i2c-0/new_device
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 53 UID: 0 PID: 970 Comm: systemd-udevd Not tainted 6.12.0-rc2+ #24
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
RIP: 0010:ts2020_probe+0xad/0xe10 [ts2020]
RSP: 0018:ffffc9000abbf598 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffffc0714809
RDX: 0000000000000002 RSI: ffff88811550be00 RDI: 0000000000000010
RBP: ffff888109868800 R08: 0000000000000001 R09: fffff52001577eb6
R10: 0000000000000000 R11: ffffc9000abbff50 R12: ffffffffc0714790
R13: 1ffff92001577eb8 R14: ffffffffc07190d0 R15: 0000000000000001
FS: 00007f95f13b98c0(0000) GS:ffff888149280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555d2634b000 CR3: 0000000152236000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ts2020_probe+0xad/0xe10 [ts2020]
i2c_device_probe+0x421/0xb40
really_probe+0x266/0x850
...
The cause of the problem is that when using sysfs to dynamically register
an i2c device, there is no platform data, but the probe process of ts2020
needs to use platform data, resulting in a null pointer being accessed.
Solve this problem by adding checks to platform data. |
| In the Linux kernel, the following vulnerability has been resolved:
media: platform: allegro-dvt: Fix possible memory leak in allocate_buffers_internal()
The buffer in the loop should be released under the exception path,
otherwise there may be a memory leak here.
To mitigate this, free the buffer when allegro_alloc_buffer fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix regression with module command in stack_trace_filter
When executing the following command:
# echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter
The current mod command causes a null pointer dereference. While commit
0f17976568b3f ("ftrace: Fix regression with module command in stack_trace_filter")
has addressed part of the issue, it left a corner case unhandled, which still
results in a kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu: Defer probe of clients after smmu device bound
Null pointer dereference occurs due to a race between smmu
driver probe and client driver probe, when of_dma_configure()
for client is called after the iommu_device_register() for smmu driver
probe has executed but before the driver_bound() for smmu driver
has been called.
Following is how the race occurs:
T1:Smmu device probe T2: Client device probe
really_probe()
arm_smmu_device_probe()
iommu_device_register()
really_probe()
platform_dma_configure()
of_dma_configure()
of_dma_configure_id()
of_iommu_configure()
iommu_probe_device()
iommu_init_device()
arm_smmu_probe_device()
arm_smmu_get_by_fwnode()
driver_find_device_by_fwnode()
driver_find_device()
next_device()
klist_next()
/* null ptr
assigned to smmu */
/* null ptr dereference
while smmu->streamid_mask */
driver_bound()
klist_add_tail()
When this null smmu pointer is dereferenced later in
arm_smmu_probe_device, the device crashes.
Fix this by deferring the probe of the client device
until the smmu device has bound to the arm smmu driver.
[will: Add comment] |
| In the Linux kernel, the following vulnerability has been resolved:
ad7780: fix division by zero in ad7780_write_raw()
In the ad7780_write_raw() , val2 can be zero, which might lead to a
division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw()
is based on iio_info's write_raw. While val is explicitly declared that
can be zero (in read mode), val2 is not specified to be non-zero. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs()
if (dev->boardinfo && dev->boardinfo->init_dyn_addr)
^^^ here check "init_dyn_addr"
i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, ...)
^^^^
free "dyn_addr"
Fix copy/paste error "dyn_addr" by replacing it with "init_dyn_addr". |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: make sure exp active before svc_export_show
The function `e_show` was called with protection from RCU. This only
ensures that `exp` will not be freed. Therefore, the reference count for
`exp` can drop to zero, which will trigger a refcount use-after-free
warning when `exp_get` is called. To resolve this issue, use
`cache_get_rcu` to ensure that `exp` remains active.
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 819 at lib/refcount.c:25
refcount_warn_saturate+0xb1/0x120
CPU: 3 UID: 0 PID: 819 Comm: cat Not tainted 6.12.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:refcount_warn_saturate+0xb1/0x120
...
Call Trace:
<TASK>
e_show+0x20b/0x230 [nfsd]
seq_read_iter+0x589/0x770
seq_read+0x1e5/0x270
vfs_read+0x125/0x530
ksys_read+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix usage slab after free
[ +0.000021] BUG: KASAN: slab-use-after-free in drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000027] Read of size 8 at addr ffff8881b8605f88 by task amd_pci_unplug/2147
[ +0.000023] CPU: 6 PID: 2147 Comm: amd_pci_unplug Not tainted 6.10.0+ #1
[ +0.000016] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020
[ +0.000016] Call Trace:
[ +0.000008] <TASK>
[ +0.000009] dump_stack_lvl+0x76/0xa0
[ +0.000017] print_report+0xce/0x5f0
[ +0.000017] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000019] ? srso_return_thunk+0x5/0x5f
[ +0.000015] ? kasan_complete_mode_report_info+0x72/0x200
[ +0.000016] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000019] kasan_report+0xbe/0x110
[ +0.000015] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000023] __asan_report_load8_noabort+0x14/0x30
[ +0.000014] drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000020] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? __kasan_check_write+0x14/0x30
[ +0.000016] ? __pfx_drm_sched_entity_flush+0x10/0x10 [gpu_sched]
[ +0.000020] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? __kasan_check_write+0x14/0x30
[ +0.000013] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? enable_work+0x124/0x220
[ +0.000015] ? __pfx_enable_work+0x10/0x10
[ +0.000013] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? free_large_kmalloc+0x85/0xf0
[ +0.000016] drm_sched_entity_destroy+0x18/0x30 [gpu_sched]
[ +0.000020] amdgpu_vce_sw_fini+0x55/0x170 [amdgpu]
[ +0.000735] ? __kasan_check_read+0x11/0x20
[ +0.000016] vce_v4_0_sw_fini+0x80/0x110 [amdgpu]
[ +0.000726] amdgpu_device_fini_sw+0x331/0xfc0 [amdgpu]
[ +0.000679] ? mutex_unlock+0x80/0xe0
[ +0.000017] ? __pfx_amdgpu_device_fini_sw+0x10/0x10 [amdgpu]
[ +0.000662] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? __kasan_check_write+0x14/0x30
[ +0.000013] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? mutex_unlock+0x80/0xe0
[ +0.000016] amdgpu_driver_release_kms+0x16/0x80 [amdgpu]
[ +0.000663] drm_minor_release+0xc9/0x140 [drm]
[ +0.000081] drm_release+0x1fd/0x390 [drm]
[ +0.000082] __fput+0x36c/0xad0
[ +0.000018] __fput_sync+0x3c/0x50
[ +0.000014] __x64_sys_close+0x7d/0xe0
[ +0.000014] x64_sys_call+0x1bc6/0x2680
[ +0.000014] do_syscall_64+0x70/0x130
[ +0.000014] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? irqentry_exit_to_user_mode+0x60/0x190
[ +0.000015] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? irqentry_exit+0x43/0x50
[ +0.000012] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? exc_page_fault+0x7c/0x110
[ +0.000015] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ +0.000014] RIP: 0033:0x7ffff7b14f67
[ +0.000013] Code: ff e8 0d 16 02 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 73 ba f7 ff
[ +0.000026] RSP: 002b:00007fffffffe378 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
[ +0.000019] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffff7b14f67
[ +0.000014] RDX: 0000000000000000 RSI: 00007ffff7f6f47a RDI: 0000000000000003
[ +0.000014] RBP: 00007fffffffe3a0 R08: 0000555555569890 R09: 0000000000000000
[ +0.000014] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffffffe5c8
[ +0.000013] R13: 00005555555552a9 R14: 0000555555557d48 R15: 00007ffff7ffd040
[ +0.000020] </TASK>
[ +0.000016] Allocated by task 383 on cpu 7 at 26.880319s:
[ +0.000014] kasan_save_stack+0x28/0x60
[ +0.000008] kasan_save_track+0x18/0x70
[ +0.000007] kasan_save_alloc_info+0x38/0x60
[ +0.000007] __kasan_kmalloc+0xc1/0xd0
[ +0.000007] kmalloc_trace_noprof+0x180/0x380
[ +0.000007] drm_sched_init+0x411/0xec0 [gpu_sched]
[ +0.000012] amdgpu_device_init+0x695f/0xa610 [amdgpu]
[ +0.000658] amdgpu_driver_load_kms+0x1a/0x120 [amdgpu]
[ +0.000662] amdgpu_pci_p
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: don't query the device logical block size multiple times
Devices block sizes may change. One of these cases is a loop device by
using ioctl LOOP_SET_BLOCK_SIZE.
While this may cause other issues like IO being rejected, in the case of
hfsplus, it will allocate a block by using that size and potentially write
out-of-bounds when hfsplus_read_wrapper calls hfsplus_submit_bio and the
latter function reads a different io_size.
Using a new min_io_size initally set to sb_min_blocksize works for the
purposes of the original fix, since it will be set to the max between
HFSPLUS_SECTOR_SIZE and the first seen logical block size. We still use the
max between HFSPLUS_SECTOR_SIZE and min_io_size in case the latter is not
initialized.
Tested by mounting an hfsplus filesystem with loop block sizes 512, 1024
and 4096.
The produced KASAN report before the fix looks like this:
[ 419.944641] ==================================================================
[ 419.945655] BUG: KASAN: slab-use-after-free in hfsplus_read_wrapper+0x659/0xa0a
[ 419.946703] Read of size 2 at addr ffff88800721fc00 by task repro/10678
[ 419.947612]
[ 419.947846] CPU: 0 UID: 0 PID: 10678 Comm: repro Not tainted 6.12.0-rc5-00008-gdf56e0f2f3ca #84
[ 419.949007] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[ 419.950035] Call Trace:
[ 419.950384] <TASK>
[ 419.950676] dump_stack_lvl+0x57/0x78
[ 419.951212] ? hfsplus_read_wrapper+0x659/0xa0a
[ 419.951830] print_report+0x14c/0x49e
[ 419.952361] ? __virt_addr_valid+0x267/0x278
[ 419.952979] ? kmem_cache_debug_flags+0xc/0x1d
[ 419.953561] ? hfsplus_read_wrapper+0x659/0xa0a
[ 419.954231] kasan_report+0x89/0xb0
[ 419.954748] ? hfsplus_read_wrapper+0x659/0xa0a
[ 419.955367] hfsplus_read_wrapper+0x659/0xa0a
[ 419.955948] ? __pfx_hfsplus_read_wrapper+0x10/0x10
[ 419.956618] ? do_raw_spin_unlock+0x59/0x1a9
[ 419.957214] ? _raw_spin_unlock+0x1a/0x2e
[ 419.957772] hfsplus_fill_super+0x348/0x1590
[ 419.958355] ? hlock_class+0x4c/0x109
[ 419.958867] ? __pfx_hfsplus_fill_super+0x10/0x10
[ 419.959499] ? __pfx_string+0x10/0x10
[ 419.960006] ? lock_acquire+0x3e2/0x454
[ 419.960532] ? bdev_name.constprop.0+0xce/0x243
[ 419.961129] ? __pfx_bdev_name.constprop.0+0x10/0x10
[ 419.961799] ? pointer+0x3f0/0x62f
[ 419.962277] ? __pfx_pointer+0x10/0x10
[ 419.962761] ? vsnprintf+0x6c4/0xfba
[ 419.963178] ? __pfx_vsnprintf+0x10/0x10
[ 419.963621] ? setup_bdev_super+0x376/0x3b3
[ 419.964029] ? snprintf+0x9d/0xd2
[ 419.964344] ? __pfx_snprintf+0x10/0x10
[ 419.964675] ? lock_acquired+0x45c/0x5e9
[ 419.965016] ? set_blocksize+0x139/0x1c1
[ 419.965381] ? sb_set_blocksize+0x6d/0xae
[ 419.965742] ? __pfx_hfsplus_fill_super+0x10/0x10
[ 419.966179] mount_bdev+0x12f/0x1bf
[ 419.966512] ? __pfx_mount_bdev+0x10/0x10
[ 419.966886] ? vfs_parse_fs_string+0xce/0x111
[ 419.967293] ? __pfx_vfs_parse_fs_string+0x10/0x10
[ 419.967702] ? __pfx_hfsplus_mount+0x10/0x10
[ 419.968073] legacy_get_tree+0x104/0x178
[ 419.968414] vfs_get_tree+0x86/0x296
[ 419.968751] path_mount+0xba3/0xd0b
[ 419.969157] ? __pfx_path_mount+0x10/0x10
[ 419.969594] ? kmem_cache_free+0x1e2/0x260
[ 419.970311] do_mount+0x99/0xe0
[ 419.970630] ? __pfx_do_mount+0x10/0x10
[ 419.971008] __do_sys_mount+0x199/0x1c9
[ 419.971397] do_syscall_64+0xd0/0x135
[ 419.971761] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 419.972233] RIP: 0033:0x7c3cb812972e
[ 419.972564] Code: 48 8b 0d f5 46 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c2 46 0d 00 f7 d8 64 89 01 48
[ 419.974371] RSP: 002b:00007ffe30632548 EFLAGS: 00000286 ORIG_RAX: 00000000000000a5
[ 419.975048] RAX: ffffffffffffffda RBX: 00007ffe306328d8 RCX: 00007c3cb812972e
[ 419.975701] RDX: 0000000020000000 RSI: 0000000020000c80 RDI:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: soc: xilinx: add the missing kfree in xlnx_add_cb_for_suspend()
If we fail to allocate memory for cb_data by kmalloc, the memory
allocation for eve_data is never freed, add the missing kfree()
in the error handling path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_config_scan()
Replace one-element array with a flexible-array member in `struct
mwifiex_ie_types_wildcard_ssid_params` to fix the following warning
on a MT8173 Chromebook (mt8173-elm-hana):
[ 356.775250] ------------[ cut here ]------------
[ 356.784543] memcpy: detected field-spanning write (size 6) of single field "wildcard_ssid_tlv->ssid" at drivers/net/wireless/marvell/mwifiex/scan.c:904 (size 1)
[ 356.813403] WARNING: CPU: 3 PID: 742 at drivers/net/wireless/marvell/mwifiex/scan.c:904 mwifiex_scan_networks+0x4fc/0xf28 [mwifiex]
The "(size 6)" above is exactly the length of the SSID of the network
this device was connected to. The source of the warning looks like:
ssid_len = user_scan_in->ssid_list[i].ssid_len;
[...]
memcpy(wildcard_ssid_tlv->ssid,
user_scan_in->ssid_list[i].ssid, ssid_len);
There is a #define WILDCARD_SSID_TLV_MAX_SIZE that uses sizeof() on this
struct, but it already didn't account for the size of the one-element
array, so it doesn't need to be changed. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: Use snd_card_free_when_closed() at disconnection
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: us122l: Use snd_card_free_when_closed() at disconnection
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
The loop of us122l->mmap_count check is dropped as well. The check is
useless for the asynchronous operation with *_when_closed(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/modes: Avoid divide by zero harder in drm_mode_vrefresh()
drm_mode_vrefresh() is trying to avoid divide by zero
by checking whether htotal or vtotal are zero. But we may
still end up with a div-by-zero of vtotal*htotal*... |
