| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Skip invalid kfunc call in backtrack_insn
The verifier skips invalid kfunc call in check_kfunc_call(), which
would be captured in fixup_kfunc_call() if such insn is not eliminated
by dead code elimination. However, this can lead to the following
warning in backtrack_insn(), also see [1]:
------------[ cut here ]------------
verifier backtracking bug
WARNING: CPU: 6 PID: 8646 at kernel/bpf/verifier.c:2756 backtrack_insn
kernel/bpf/verifier.c:2756
__mark_chain_precision kernel/bpf/verifier.c:3065
mark_chain_precision kernel/bpf/verifier.c:3165
adjust_reg_min_max_vals kernel/bpf/verifier.c:10715
check_alu_op kernel/bpf/verifier.c:10928
do_check kernel/bpf/verifier.c:13821 [inline]
do_check_common kernel/bpf/verifier.c:16289
[...]
So make backtracking conservative with this by returning ENOTSUPP.
[1] https://lore.kernel.org/bpf/CACkBjsaXNceR8ZjkLG=dT3P=4A8SBsg0Z5h5PWLryF5=ghKq=g@mail.gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: imx8mm-verdin: Do not power down eth-phy
Currently if suspending using either freeze or memory state, the fec
driver tries to power down the phy which leads to crash of the kernel
and non-responsible kernel with the following call trace:
[ 24.839889 ] Call trace:
[ 24.839892 ] phy_error+0x18/0x60
[ 24.839898 ] kszphy_handle_interrupt+0x6c/0x80
[ 24.839903 ] phy_interrupt+0x20/0x2c
[ 24.839909 ] irq_thread_fn+0x30/0xa0
[ 24.839919 ] irq_thread+0x178/0x2c0
[ 24.839925 ] kthread+0x154/0x160
[ 24.839932 ] ret_from_fork+0x10/0x20
Since there is currently no functionality in the phy subsystem to power
down phys let's just disable the feature of powering-down the ethernet
phy. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Check for any of tcp_bpf_prots when cloning a listener
A listening socket linked to a sockmap has its sk_prot overridden. It
points to one of the struct proto variants in tcp_bpf_prots. The variant
depends on the socket's family and which sockmap programs are attached.
A child socket cloned from a TCP listener initially inherits their sk_prot.
But before cloning is finished, we restore the child's proto to the
listener's original non-tcp_bpf_prots one. This happens in
tcp_create_openreq_child -> tcp_bpf_clone.
Today, in tcp_bpf_clone we detect if the child's proto should be restored
by checking only for the TCP_BPF_BASE proto variant. This is not
correct. The sk_prot of listening socket linked to a sockmap can point to
to any variant in tcp_bpf_prots.
If the listeners sk_prot happens to be not the TCP_BPF_BASE variant, then
the child socket unintentionally is left if the inherited sk_prot by
tcp_bpf_clone.
This leads to issues like infinite recursion on close [1], because the
child state is otherwise not set up for use with tcp_bpf_prot operations.
Adjust the check in tcp_bpf_clone to detect all of tcp_bpf_prots variants.
Note that it wouldn't be sufficient to check the socket state when
overriding the sk_prot in tcp_bpf_update_proto in order to always use the
TCP_BPF_BASE variant for listening sockets. Since commit
b8b8315e39ff ("bpf, sockmap: Remove unhash handler for BPF sockmap usage")
it is possible for a socket to transition to TCP_LISTEN state while already
linked to a sockmap, e.g. connect() -> insert into map ->
connect(AF_UNSPEC) -> listen().
[1]: https://lore.kernel.org/all/00000000000073b14905ef2e7401@google.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-mtrace: prevent underflow in sof_ipc4_priority_mask_dfs_write()
The "id" comes from the user. Change the type to unsigned to prevent
an array underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Skip task with pid=1 in send_signal_common()
The following kernel panic can be triggered when a task with pid=1 attaches
a prog that attempts to send killing signal to itself, also see [1] for more
details:
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
CPU: 3 PID: 1 Comm: systemd Not tainted 6.1.0-09652-g59fe41b5255f #148
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x100/0x178 lib/dump_stack.c:106
panic+0x2c4/0x60f kernel/panic.c:275
do_exit.cold+0x63/0xe4 kernel/exit.c:789
do_group_exit+0xd4/0x2a0 kernel/exit.c:950
get_signal+0x2460/0x2600 kernel/signal.c:2858
arch_do_signal_or_restart+0x78/0x5d0 arch/x86/kernel/signal.c:306
exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
do_syscall_64+0x44/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
So skip task with pid=1 in bpf_send_signal_common() to avoid the panic.
[1] https://lore.kernel.org/bpf/20221222043507.33037-1-sunhao.th@gmail.com |
| In the Linux kernel, the following vulnerability has been resolved:
riscv/kprobe: Fix instruction simulation of JALR
Set kprobe at 'jalr 1140(ra)' of vfs_write results in the following
crash:
[ 32.092235] Unable to handle kernel access to user memory without uaccess routines at virtual address 00aaaaaad77b1170
[ 32.093115] Oops [#1]
[ 32.093251] Modules linked in:
[ 32.093626] CPU: 0 PID: 135 Comm: ftracetest Not tainted 6.2.0-rc2-00013-gb0aa5e5df0cb-dirty #16
[ 32.093985] Hardware name: riscv-virtio,qemu (DT)
[ 32.094280] epc : ksys_read+0x88/0xd6
[ 32.094855] ra : ksys_read+0xc0/0xd6
[ 32.095016] epc : ffffffff801cda80 ra : ffffffff801cdab8 sp : ff20000000d7bdc0
[ 32.095227] gp : ffffffff80f14000 tp : ff60000080f9cb40 t0 : ffffffff80f13e80
[ 32.095500] t1 : ffffffff8000c29c t2 : ffffffff800dbc54 s0 : ff20000000d7be60
[ 32.095716] s1 : 0000000000000000 a0 : ffffffff805a64ae a1 : ffffffff80a83708
[ 32.095921] a2 : ffffffff80f160a0 a3 : 0000000000000000 a4 : f229b0afdb165300
[ 32.096171] a5 : f229b0afdb165300 a6 : ffffffff80eeebd0 a7 : 00000000000003ff
[ 32.096411] s2 : ff6000007ff76800 s3 : fffffffffffffff7 s4 : 00aaaaaad77b1170
[ 32.096638] s5 : ffffffff80f160a0 s6 : ff6000007ff76800 s7 : 0000000000000030
[ 32.096865] s8 : 00ffffffc3d97be0 s9 : 0000000000000007 s10: 00aaaaaad77c9410
[ 32.097092] s11: 0000000000000000 t3 : ffffffff80f13e48 t4 : ffffffff8000c29c
[ 32.097317] t5 : ffffffff8000c29c t6 : ffffffff800dbc54
[ 32.097505] status: 0000000200000120 badaddr: 00aaaaaad77b1170 cause: 000000000000000d
[ 32.098011] [<ffffffff801cdb72>] ksys_write+0x6c/0xd6
[ 32.098222] [<ffffffff801cdc06>] sys_write+0x2a/0x38
[ 32.098405] [<ffffffff80003c76>] ret_from_syscall+0x0/0x2
Since the rs1 and rd might be the same one, such as 'jalr 1140(ra)',
hence it requires obtaining the target address from rs1 followed by
updating rd.
[Palmer: Pick Guo's cleanup] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix a WARN during dereg_mr for DM type
Memory regions (MR) of type DM (device memory) do not have an associated
umem.
In the __mlx5_ib_dereg_mr() -> mlx5_free_priv_descs() flow, the code
incorrectly takes the wrong branch, attempting to call
dma_unmap_single() on a DMA address that is not mapped.
This results in a WARN [1], as shown below.
The issue is resolved by properly accounting for the DM type and
ensuring the correct branch is selected in mlx5_free_priv_descs().
[1]
WARNING: CPU: 12 PID: 1346 at drivers/iommu/dma-iommu.c:1230 iommu_dma_unmap_page+0x79/0x90
Modules linked in: ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry ovelay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core
CPU: 12 UID: 0 PID: 1346 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1631
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:iommu_dma_unmap_page+0x79/0x90
Code: 2b 49 3b 29 72 26 49 3b 69 08 73 20 4d 89 f0 44 89 e9 4c 89 e2 48 89 ee 48 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 07 b8 88 ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 66 0f 1f 44 00
RSP: 0018:ffffc90001913a10 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88810194b0a8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001
RBP: ffff88810194b0a8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f537abdd740(0000) GS:ffff88885fb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f537aeb8000 CR3: 000000010c248001 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn+0x84/0x190
? iommu_dma_unmap_page+0x79/0x90
? report_bug+0xf8/0x1c0
? handle_bug+0x55/0x90
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? iommu_dma_unmap_page+0x79/0x90
dma_unmap_page_attrs+0xe6/0x290
mlx5_free_priv_descs+0xb0/0xe0 [mlx5_ib]
__mlx5_ib_dereg_mr+0x37e/0x520 [mlx5_ib]
? _raw_spin_unlock_irq+0x24/0x40
? wait_for_completion+0xfe/0x130
? rdma_restrack_put+0x63/0xe0 [ib_core]
ib_dereg_mr_user+0x5f/0x120 [ib_core]
? lock_release+0xc6/0x280
destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs]
uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs]
uobj_destroy+0x3f/0x70 [ib_uverbs]
ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs]
? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs]
? lock_acquire+0xc1/0x2f0
? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs]
? ib_uverbs_ioctl+0x116/0x170 [ib_uverbs]
? lock_release+0xc6/0x280
ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs]
? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs]
__x64_sys_ioctl+0x1b0/0xa70
do_syscall_64+0x6b/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f537adaf17b
Code: 0f 1e fa 48 8b 05 1d ad 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed ac 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffff218f0b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffff218f1d8 RCX: 00007f537adaf17b
RDX: 00007ffff218f1c0 RSI: 00000000c0181b01 RDI: 0000000000000003
RBP: 00007ffff218f1a0 R08: 00007f537aa8d010 R09: 0000561ee2e4f270
R10: 00007f537aace3a8 R11: 0000000000000246 R12: 00007ffff218f190
R13: 000000000000001c R14: 0000561ee2e4d7c0 R15: 00007ffff218f450
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix implicit ODP hang on parent deregistration
Fix the destroy_unused_implicit_child_mr() to prevent hanging during
parent deregistration as of below [1].
Upon entering destroy_unused_implicit_child_mr(), the reference count
for the implicit MR parent is incremented using:
refcount_inc_not_zero().
A corresponding decrement must be performed if
free_implicit_child_mr_work() is not called.
The code has been updated to properly manage the reference count that
was incremented.
[1]
INFO: task python3:2157 blocked for more than 120 seconds.
Not tainted 6.12.0-rc7+ #1633
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:python3 state:D stack:0 pid:2157 tgid:2157 ppid:1685 flags:0x00000000
Call Trace:
<TASK>
__schedule+0x420/0xd30
schedule+0x47/0x130
__mlx5_ib_dereg_mr+0x379/0x5d0 [mlx5_ib]
? __pfx_autoremove_wake_function+0x10/0x10
ib_dereg_mr_user+0x5f/0x120 [ib_core]
? lock_release+0xc6/0x280
destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs]
uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs]
uobj_destroy+0x3f/0x70 [ib_uverbs]
ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs]
? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs]
? lock_acquire+0xc1/0x2f0
? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs]
? ib_uverbs_ioctl+0x116/0x170 [ib_uverbs]
? lock_release+0xc6/0x280
ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs]
? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs]
__x64_sys_ioctl+0x1b0/0xa70
? kmem_cache_free+0x221/0x400
do_syscall_64+0x6b/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f20f21f017b
RSP: 002b:00007ffcfc4a77c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffcfc4a78d8 RCX: 00007f20f21f017b
RDX: 00007ffcfc4a78c0 RSI: 00000000c0181b01 RDI: 0000000000000003
RBP: 00007ffcfc4a78a0 R08: 000056147d125190 R09: 00007f20f1f14c60
R10: 0000000000000001 R11: 0000000000000246 R12: 00007ffcfc4a7890
R13: 000000000000001c R14: 000056147d100fc0 R15: 00007f20e365c9d0
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix deinitializing VF in error path
If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees
all VFs without removing them from snapshot PF-VF mailbox list, leading
to list corruption.
Reproducer:
devlink dev eswitch set $PF1_PCI mode switchdev
ip l s $PF1 up
ip l s $PF1 promisc on
sleep 1
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
sleep 1
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
Trace (minimized):
list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330).
kernel BUG at lib/list_debug.c:29!
RIP: 0010:__list_add_valid_or_report+0xa6/0x100
ice_mbx_init_vf_info+0xa7/0x180 [ice]
ice_initialize_vf_entry+0x1fa/0x250 [ice]
ice_sriov_configure+0x8d7/0x1520 [ice]
? __percpu_ref_switch_mode+0x1b1/0x5d0
? __pfx_ice_sriov_configure+0x10/0x10 [ice]
Sometimes a KASAN report can be seen instead with a similar stack trace:
BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100
VFs are added to this list in ice_mbx_init_vf_info(), but only removed
in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is
also being called in other places where VFs are being removed (including
ice_free_vfs() itself). |
| Windows Kernel Elevation of Privilege Vulnerability |
| Windows MSHTML Platform Remote Code Execution Vulnerability |
| Microsoft Exchange Server Information Disclosure Vulnerability |
| Windows Kernel Elevation of Privilege Vulnerability |
| Scripting Engine Memory Corruption Vulnerability |
| Microsoft Exchange Server Remote Code Execution Vulnerability |
| Projectsworlds Online Shopping System PHP 1.0 is vulnerable to SQL injection via the id parameter in cart_remove.php. |
| In ProjectWorlds Online Shopping System PHP 1.0, a CSRF vulnerability in cart_remove.php allows a remote attacker to remove any product in the customer's cart. |
| code-projects Client Details System 1.0 is vulnerable to Cross Site Scripting (XSS). When adding customer information, the client details system fills in malicious JavaScript code in the username field. |
| A vulnerability, which was classified as critical, has been found in code-projects Client Details System 1.0. This issue affects some unknown processing of the file /clientdetails/admin/index.php. The manipulation of the argument Username leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was identified in code-projects Client Details System 1.0. Impacted is an unknown function of the file /admin/update-profile.php. Such manipulation of the argument uid leads to sql injection. The attack can be executed remotely. The exploit is publicly available and might be used. |
