| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: Fix uninit-value access of imap allocated in the diMount() function
syzbot reports that hex_dump_to_buffer is using uninit-value:
=====================================================
BUG: KMSAN: uninit-value in hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171
hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171
print_hex_dump+0x13d/0x3e0 lib/hexdump.c:276
diFree+0x5ba/0x4350 fs/jfs/jfs_imap.c:876
jfs_evict_inode+0x510/0x550 fs/jfs/inode.c:156
evict+0x723/0xd10 fs/inode.c:796
iput_final fs/inode.c:1946 [inline]
iput+0x97b/0xdb0 fs/inode.c:1972
txUpdateMap+0xf3e/0x1150 fs/jfs/jfs_txnmgr.c:2367
txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline]
jfs_lazycommit+0x627/0x11d0 fs/jfs/jfs_txnmgr.c:2733
kthread+0x6b9/0xef0 kernel/kthread.c:464
ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4121 [inline]
slab_alloc_node mm/slub.c:4164 [inline]
__kmalloc_cache_noprof+0x8e3/0xdf0 mm/slub.c:4320
kmalloc_noprof include/linux/slab.h:901 [inline]
diMount+0x61/0x7f0 fs/jfs/jfs_imap.c:105
jfs_mount+0xa8e/0x11d0 fs/jfs/jfs_mount.c:176
jfs_fill_super+0xa47/0x17c0 fs/jfs/super.c:523
get_tree_bdev_flags+0x6ec/0x910 fs/super.c:1636
get_tree_bdev+0x37/0x50 fs/super.c:1659
jfs_get_tree+0x34/0x40 fs/jfs/super.c:635
vfs_get_tree+0xb1/0x5a0 fs/super.c:1814
do_new_mount+0x71f/0x15e0 fs/namespace.c:3560
path_mount+0x742/0x1f10 fs/namespace.c:3887
do_mount fs/namespace.c:3900 [inline]
__do_sys_mount fs/namespace.c:4111 [inline]
__se_sys_mount+0x71f/0x800 fs/namespace.c:4088
__x64_sys_mount+0xe4/0x150 fs/namespace.c:4088
x64_sys_call+0x39bf/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:166
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
=====================================================
The reason is that imap is not properly initialized after memory
allocation. It will cause the snprintf() function to write uninitialized
data into linebuf within hex_dump_to_buffer().
Fix this by using kzalloc instead of kmalloc to clear its content at the
beginning in diMount(). |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: add sanity check for agwidth in dbMount
The width in dmapctl of the AG is zero, it trigger a divide error when
calculating the control page level in dbAllocAG.
To avoid this issue, add a check for agwidth in dbAllocAG. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: ignore xattrs past end
Once inside 'ext4_xattr_inode_dec_ref_all' we should
ignore xattrs entries past the 'end' entry.
This fixes the following KASAN reported issue:
==================================================================
BUG: KASAN: slab-use-after-free in ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
Read of size 4 at addr ffff888012c120c4 by task repro/2065
CPU: 1 UID: 0 PID: 2065 Comm: repro Not tainted 6.13.0-rc2+ #11
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x1fd/0x300
? tcp_gro_dev_warn+0x260/0x260
? _printk+0xc0/0x100
? read_lock_is_recursive+0x10/0x10
? irq_work_queue+0x72/0xf0
? __virt_addr_valid+0x17b/0x4b0
print_address_description+0x78/0x390
print_report+0x107/0x1f0
? __virt_addr_valid+0x17b/0x4b0
? __virt_addr_valid+0x3ff/0x4b0
? __phys_addr+0xb5/0x160
? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
kasan_report+0xcc/0x100
? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
? ext4_xattr_delete_inode+0xd30/0xd30
? __ext4_journal_ensure_credits+0x5f0/0x5f0
? __ext4_journal_ensure_credits+0x2b/0x5f0
? inode_update_timestamps+0x410/0x410
ext4_xattr_delete_inode+0xb64/0xd30
? ext4_truncate+0xb70/0xdc0
? ext4_expand_extra_isize_ea+0x1d20/0x1d20
? __ext4_mark_inode_dirty+0x670/0x670
? ext4_journal_check_start+0x16f/0x240
? ext4_inode_is_fast_symlink+0x2f2/0x3a0
ext4_evict_inode+0xc8c/0xff0
? ext4_inode_is_fast_symlink+0x3a0/0x3a0
? do_raw_spin_unlock+0x53/0x8a0
? ext4_inode_is_fast_symlink+0x3a0/0x3a0
evict+0x4ac/0x950
? proc_nr_inodes+0x310/0x310
? trace_ext4_drop_inode+0xa2/0x220
? _raw_spin_unlock+0x1a/0x30
? iput+0x4cb/0x7e0
do_unlinkat+0x495/0x7c0
? try_break_deleg+0x120/0x120
? 0xffffffff81000000
? __check_object_size+0x15a/0x210
? strncpy_from_user+0x13e/0x250
? getname_flags+0x1dc/0x530
__x64_sys_unlinkat+0xc8/0xf0
do_syscall_64+0x65/0x110
entry_SYSCALL_64_after_hwframe+0x67/0x6f
RIP: 0033:0x434ffd
Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8
RSP: 002b:00007ffc50fa7b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000107
RAX: ffffffffffffffda RBX: 00007ffc50fa7e18 RCX: 0000000000434ffd
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 00007ffc50fa7be0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007ffc50fa7e08 R14: 00000000004bbf30 R15: 0000000000000001
</TASK>
The buggy address belongs to the object at ffff888012c12000
which belongs to the cache filp of size 360
The buggy address is located 196 bytes inside of
freed 360-byte region [ffff888012c12000, ffff888012c12168)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12c12
head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x40(head|node=0|zone=0)
page_type: f5(slab)
raw: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004
raw: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000
head: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004
head: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000
head: 0000000000000001 ffffea00004b0481 ffffffffffffffff 0000000000000000
head: 0000000000000002 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888012c11f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888012c12000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff888012c12080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888012c12100: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
ffff888012c12180: fc fc fc fc fc fc fc fc fc
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: vlan: don't propagate flags on open
With the device instance lock, there is now a possibility of a deadlock:
[ 1.211455] ============================================
[ 1.211571] WARNING: possible recursive locking detected
[ 1.211687] 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 Not tainted
[ 1.211823] --------------------------------------------
[ 1.211936] ip/184 is trying to acquire lock:
[ 1.212032] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_set_allmulti+0x4e/0xb0
[ 1.212207]
[ 1.212207] but task is already holding lock:
[ 1.212332] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[ 1.212487]
[ 1.212487] other info that might help us debug this:
[ 1.212626] Possible unsafe locking scenario:
[ 1.212626]
[ 1.212751] CPU0
[ 1.212815] ----
[ 1.212871] lock(&dev->lock);
[ 1.212944] lock(&dev->lock);
[ 1.213016]
[ 1.213016] *** DEADLOCK ***
[ 1.213016]
[ 1.213143] May be due to missing lock nesting notation
[ 1.213143]
[ 1.213294] 3 locks held by ip/184:
[ 1.213371] #0: ffffffff838b53e0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x1b/0xa0
[ 1.213543] #1: ffffffff84e5fc70 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x37/0xa0
[ 1.213727] #2: ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[ 1.213895]
[ 1.213895] stack backtrace:
[ 1.213991] CPU: 0 UID: 0 PID: 184 Comm: ip Not tainted 6.14.0-rc5-01215-g032756b4ca7a-dirty #5
[ 1.213993] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 1.213994] Call Trace:
[ 1.213995] <TASK>
[ 1.213996] dump_stack_lvl+0x8e/0xd0
[ 1.214000] print_deadlock_bug+0x28b/0x2a0
[ 1.214020] lock_acquire+0xea/0x2a0
[ 1.214027] __mutex_lock+0xbf/0xd40
[ 1.214038] dev_set_allmulti+0x4e/0xb0 # real_dev->flags & IFF_ALLMULTI
[ 1.214040] vlan_dev_open+0xa5/0x170 # ndo_open on vlandev
[ 1.214042] __dev_open+0x145/0x270
[ 1.214046] __dev_change_flags+0xb0/0x1e0
[ 1.214051] netif_change_flags+0x22/0x60 # IFF_UP vlandev
[ 1.214053] dev_change_flags+0x61/0xb0 # for each device in group from dev->vlan_info
[ 1.214055] vlan_device_event+0x766/0x7c0 # on netdevsim0
[ 1.214058] notifier_call_chain+0x78/0x120
[ 1.214062] netif_open+0x6d/0x90
[ 1.214064] dev_open+0x5b/0xb0 # locks netdevsim0
[ 1.214066] bond_enslave+0x64c/0x1230
[ 1.214075] do_set_master+0x175/0x1e0 # on netdevsim0
[ 1.214077] do_setlink+0x516/0x13b0
[ 1.214094] rtnl_newlink+0xaba/0xb80
[ 1.214132] rtnetlink_rcv_msg+0x440/0x490
[ 1.214144] netlink_rcv_skb+0xeb/0x120
[ 1.214150] netlink_unicast+0x1f9/0x320
[ 1.214153] netlink_sendmsg+0x346/0x3f0
[ 1.214157] __sock_sendmsg+0x86/0xb0
[ 1.214160] ____sys_sendmsg+0x1c8/0x220
[ 1.214164] ___sys_sendmsg+0x28f/0x2d0
[ 1.214179] __x64_sys_sendmsg+0xef/0x140
[ 1.214184] do_syscall_64+0xec/0x1d0
[ 1.214190] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 1.214191] RIP: 0033:0x7f2d1b4a7e56
Device setup:
netdevsim0 (down)
^ ^
bond netdevsim1.100@netdevsim1 allmulticast=on (down)
When we enslave the lower device (netdevsim0) which has a vlan, we
propagate vlan's allmuti/promisc flags during ndo_open. This causes
(re)locking on of the real_dev.
Propagate allmulti/promisc on flags change, not on the open. There
is a slight semantics change that vlans that are down now propagate
the flags, but this seems unlikely to result in the real issues.
Reproducer:
echo 0 1 > /sys/bus/netdevsim/new_device
dev_path=$(ls -d /sys/bus/netdevsim/devices/netdevsim0/net/*)
dev=$(echo $dev_path | rev | cut -d/ -f1 | rev)
ip link set dev $dev name netdevsim0
ip link set dev netdevsim0 up
ip link add link netdevsim0 name netdevsim0.100 type vlan id 100
ip link set dev netdevsim0.100 allm
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t type
The access to the PCI config space via pci_ops::read and pci_ops::write is
a low-level hardware access. The functions can be accessed with disabled
interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this
purpose.
A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be
acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in
the same context as the pci_lock.
Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with
interrupts disabled.
This was reported as:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
Call Trace:
rt_spin_lock+0x4e/0x130
vmd_pci_read+0x8d/0x100 [vmd]
pci_user_read_config_byte+0x6f/0xe0
pci_read_config+0xfe/0x290
sysfs_kf_bin_read+0x68/0x90
[bigeasy: reword commit message]
Tested-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
[kwilczynski: commit log]
[bhelgaas: add back report info from
https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/] |
| In the Linux kernel, the following vulnerability has been resolved:
iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic()
When performing an iSCSI boot using IPv6, iscsistart still reads the
/sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix
length is 64, this causes the shift exponent to become negative,
triggering a UBSAN warning. As the concept of a subnet mask does not
apply to IPv6, the value is set to ~0 to suppress the warning message. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla1280: Fix kernel oops when debug level > 2
A null dereference or oops exception will eventually occur when qla1280.c
driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I
think its clear from the code that the intention here is sg_dma_len(s) not
length of sg_next(s) when printing the debug info. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rcar: Use raw_spinlock to protect register access
Use raw_spinlock in order to fix spurious messages about invalid context
when spinlock debugging is enabled. The lock is only used to serialize
register access.
[ 4.239592] =============================
[ 4.239595] [ BUG: Invalid wait context ]
[ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted
[ 4.239603] -----------------------------
[ 4.239606] kworker/u8:5/76 is trying to lock:
[ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164
[ 4.239641] other info that might help us debug this:
[ 4.239643] context-{5:5}
[ 4.239646] 5 locks held by kworker/u8:5/76:
[ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c
[ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value.
[ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c
[ 4.254109] #2: ffff00000920c8f8
[ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value.
[ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc
[ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690
[ 4.264840] #4:
[ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value.
[ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690
[ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz
[ 4.304082] stack backtrace:
[ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35
[ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
[ 4.304097] Workqueue: async async_run_entry_fn
[ 4.304106] Call trace:
[ 4.304110] show_stack+0x14/0x20 (C)
[ 4.304122] dump_stack_lvl+0x6c/0x90
[ 4.304131] dump_stack+0x14/0x1c
[ 4.304138] __lock_acquire+0xdfc/0x1584
[ 4.426274] lock_acquire+0x1c4/0x33c
[ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80
[ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164
[ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8
[ 4.444422] __irq_set_trigger+0x5c/0x178
[ 4.448435] __setup_irq+0x2e4/0x690
[ 4.452012] request_threaded_irq+0xc4/0x190
[ 4.456285] devm_request_threaded_irq+0x7c/0xf4
[ 4.459398] ata1: link resume succeeded after 1 retries
[ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0
[ 4.470660] mmc_start_host+0x50/0xac
[ 4.474327] mmc_add_host+0x80/0xe4
[ 4.477817] tmio_mmc_host_probe+0x2b0/0x440
[ 4.482094] renesas_sdhi_probe+0x488/0x6f4
[ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78
[ 4.491509] platform_probe+0x64/0xd8
[ 4.495178] really_probe+0xb8/0x2a8
[ 4.498756] __driver_probe_device+0x74/0x118
[ 4.503116] driver_probe_device+0x3c/0x154
[ 4.507303] __device_attach_driver+0xd4/0x160
[ 4.511750] bus_for_each_drv+0x84/0xe0
[ 4.515588] __device_attach_async_helper+0xb0/0xdc
[ 4.520470] async_run_entry_fn+0x30/0xd8
[ 4.524481] process_one_work+0x210/0x62c
[ 4.528494] worker_thread+0x1ac/0x340
[ 4.532245] kthread+0x10c/0x110
[ 4.535476] ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: omap: use threaded IRQ for LCD DMA
When using touchscreen and framebuffer, Nokia 770 crashes easily with:
BUG: scheduling while atomic: irq/144-ads7846/82/0x00010000
Modules linked in: usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap_udc ohci_omap ohci_hcd
CPU: 0 UID: 0 PID: 82 Comm: irq/144-ads7846 Not tainted 6.12.7-770 #2
Hardware name: Nokia 770
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x54/0x5c
dump_stack_lvl from __schedule_bug+0x50/0x70
__schedule_bug from __schedule+0x4d4/0x5bc
__schedule from schedule+0x34/0xa0
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from __mutex_lock.constprop.0+0x218/0x3b4
__mutex_lock.constprop.0 from clk_prepare_lock+0x38/0xe4
clk_prepare_lock from clk_set_rate+0x18/0x154
clk_set_rate from sossi_read_data+0x4c/0x168
sossi_read_data from hwa742_read_reg+0x5c/0x8c
hwa742_read_reg from send_frame_handler+0xfc/0x300
send_frame_handler from process_pending_requests+0x74/0xd0
process_pending_requests from lcd_dma_irq_handler+0x50/0x74
lcd_dma_irq_handler from __handle_irq_event_percpu+0x44/0x130
__handle_irq_event_percpu from handle_irq_event+0x28/0x68
handle_irq_event from handle_level_irq+0x9c/0x170
handle_level_irq from generic_handle_domain_irq+0x2c/0x3c
generic_handle_domain_irq from omap1_handle_irq+0x40/0x8c
omap1_handle_irq from generic_handle_arch_irq+0x28/0x3c
generic_handle_arch_irq from call_with_stack+0x1c/0x24
call_with_stack from __irq_svc+0x94/0xa8
Exception stack(0xc5255da0 to 0xc5255de8)
5da0: 00000001 c22fc620 00000000 00000000 c08384a8 c106fc00 00000000 c240c248
5dc0: c113a600 c3f6ec30 00000001 00000000 c22fc620 c5255df0 c22fc620 c0279a94
5de0: 60000013 ffffffff
__irq_svc from clk_prepare_lock+0x4c/0xe4
clk_prepare_lock from clk_get_rate+0x10/0x74
clk_get_rate from uwire_setup_transfer+0x40/0x180
uwire_setup_transfer from spi_bitbang_transfer_one+0x2c/0x9c
spi_bitbang_transfer_one from spi_transfer_one_message+0x2d0/0x664
spi_transfer_one_message from __spi_pump_transfer_message+0x29c/0x498
__spi_pump_transfer_message from __spi_sync+0x1f8/0x2e8
__spi_sync from spi_sync+0x24/0x40
spi_sync from ads7846_halfd_read_state+0x5c/0x1c0
ads7846_halfd_read_state from ads7846_irq+0x58/0x348
ads7846_irq from irq_thread_fn+0x1c/0x78
irq_thread_fn from irq_thread+0x120/0x228
irq_thread from kthread+0xc8/0xe8
kthread from ret_from_fork+0x14/0x28
As a quick fix, switch to a threaded IRQ which provides a stable system. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Check the return value of of_property_read_string_index()
Somewhen between 6.10 and 6.11 the driver started to crash on my
MacBookPro14,3. The property doesn't exist and 'tmp' remains
uninitialized, so we pass a random pointer to devm_kstrdup().
The crash I am getting looks like this:
BUG: unable to handle page fault for address: 00007f033c669379
PF: supervisor read access in kernel mode
PF: error_code(0x0001) - permissions violation
PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025
Oops: Oops: 0001 [#1] SMP PTI
CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1
Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024
RIP: 0010:strlen+0x4/0x30
Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc
RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202
RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001
RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379
RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a
R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8
R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30
FS: 00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x149/0x4c0
? raw_spin_rq_lock_nested+0xe/0x20
? sched_balance_newidle+0x22b/0x3c0
? update_load_avg+0x78/0x770
? exc_page_fault+0x6f/0x150
? asm_exc_page_fault+0x26/0x30
? __pfx_pci_conf1_write+0x10/0x10
? strlen+0x4/0x30
devm_kstrdup+0x25/0x70
brcmf_of_probe+0x273/0x350 [brcmfmac] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: storvsc: Ratelimit warning logs to prevent VM denial of service
If there's a persistent error in the hypervisor, the SCSI warning for
failed I/O can flood the kernel log and max out CPU utilization,
preventing troubleshooting from the VM side. Ratelimit the warning so
it doesn't DoS the VM. |
| The Portrait Dell Color Management application 3.3.8 for Dell monitors has Insecure Permissions, |
| An out-of-bounds read vulnerability exists in the JPEGBITSCodec::InternalCode functionality of Grassroot DICOM 3.024. A specially crafted DICOM file can lead to an information leak. An attacker can provide a malicious file to trigger this vulnerability.The function `grayscale_convert` is called based of the value of the malicious DICOM file specifying the intended interpretation of the image pixel data |
| An out-of-bounds read vulnerability exists in the JPEGBITSCodec::InternalCode functionality of Grassroot DICOM 3.024. A specially crafted DICOM file can lead to an information leak. An attacker can provide a malicious file to trigger this vulnerability.The function `null_convert` is called based of the value of the malicious DICOM file specifying the intended interpretation of the image pixel data |
| Incorrect access control in Comtech EF Data CDM-625 / CDM-625A Advanced Satellite Modem with firmware v2.5.1 allows attackers to change the Administrator password and escalate privileges via sending a crafted POST request to /Forms/admin_access_1. |
| An issue was discovered in the Portrait Dell Color Management application through 3.3.008 for Dell monitors, It creates a temporary folder, with weak permissions, during installation and uninstallation. A low-privileged attacker with local access could potentially exploit this, leading to elevation of privileges. |
| Galette is a membership management web application for non profit organizations. Starting in version 1.1.4 and prior to version 1.2.0, a user who is logged in as group manager may bypass intended restrictions on Contributions and Transactions. Version 1.2.0 fixes the issue. |
| Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Poll Routes page and entering shell metacharacters in the Router IP Address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.) |
| Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Diagnostics Trace Route page and entering shell metacharacters in the Target IP address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.) |
| Comtech H8 Heights Remote Gateway 2.5.1 devices allow XSS and HTML injection via the Site Name (aka SiteName) field. |
