| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Any project that parses untrusted Protocol Buffers data containing an arbitrary number of nested groups / series of SGROUP tags can corrupted by exceeding the stack limit i.e. StackOverflow. Parsing nested groups as unknown fields with DiscardUnknownFieldsParser or Java Protobuf Lite parser, or against Protobuf map fields, creates unbounded recursions that can be abused by an attacker. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: llcc: Handle a second device without data corruption
Usually there is only one llcc device. But if there were a second, even
a failed probe call would modify the global drv_data pointer. So check
if drv_data is valid before overwriting it. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/tdx: Zero out the missing RSI in TDX_HYPERCALL macro
In the TDX_HYPERCALL asm, after the TDCALL instruction returns from the
untrusted VMM, the registers that the TDX guest shares to the VMM need
to be cleared to avoid speculative execution of VMM-provided values.
RSI is specified in the bitmap of those registers, but it is missing
when zeroing out those registers in the current TDX_HYPERCALL.
It was there when it was originally added in commit 752d13305c78
("x86/tdx: Expand __tdx_hypercall() to handle more arguments"), but was
later removed in commit 1e70c680375a ("x86/tdx: Do not corrupt
frame-pointer in __tdx_hypercall()"), which was correct because %rsi is
later restored in the "pop %rsi". However a later commit 7a3a401874be
("x86/tdx: Drop flags from __tdx_hypercall()") removed that "pop %rsi"
but forgot to add the "xor %rsi, %rsi" back.
Fix by adding it back. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: keep DMA buffers required for suspend/resume
Nouveau deallocates a few buffers post GPU init which are required for GPU suspend/resume to function correctly.
This is likely not as big an issue on systems where the NVGPU is the only GPU, but on multi-GPU set ups it leads to a regression where the kernel module errors and results in a system-wide rendering freeze.
This commit addresses that regression by moving the two buffers required for suspend and resume to be deallocated at driver unload instead of post init. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: confirm multicast packets before passing them up the stack
conntrack nf_confirm logic cannot handle cloned skbs referencing
the same nf_conn entry, which will happen for multicast (broadcast)
frames on bridges.
Example:
macvlan0
|
br0
/ \
ethX ethY
ethX (or Y) receives a L2 multicast or broadcast packet containing
an IP packet, flow is not yet in conntrack table.
1. skb passes through bridge and fake-ip (br_netfilter)Prerouting.
-> skb->_nfct now references a unconfirmed entry
2. skb is broad/mcast packet. bridge now passes clones out on each bridge
interface.
3. skb gets passed up the stack.
4. In macvlan case, macvlan driver retains clone(s) of the mcast skb
and schedules a work queue to send them out on the lower devices.
The clone skb->_nfct is not a copy, it is the same entry as the
original skb. The macvlan rx handler then returns RX_HANDLER_PASS.
5. Normal conntrack hooks (in NF_INET_LOCAL_IN) confirm the orig skb.
The Macvlan broadcast worker and normal confirm path will race.
This race will not happen if step 2 already confirmed a clone. In that
case later steps perform skb_clone() with skb->_nfct already confirmed (in
hash table). This works fine.
But such confirmation won't happen when eb/ip/nftables rules dropped the
packets before they reached the nf_confirm step in postrouting.
Pablo points out that nf_conntrack_bridge doesn't allow use of stateful
nat, so we can safely discard the nf_conn entry and let inet call
conntrack again.
This doesn't work for bridge netfilter: skb could have a nat
transformation. Also bridge nf prevents re-invocation of inet prerouting
via 'sabotage_in' hook.
Work around this problem by explicit confirmation of the entry at LOCAL_IN
time, before upper layer has a chance to clone the unconfirmed entry.
The downside is that this disables NAT and conntrack helpers.
Alternative fix would be to add locking to all code parts that deal with
unconfirmed packets, but even if that could be done in a sane way this
opens up other problems, for example:
-m physdev --physdev-out eth0 -j SNAT --snat-to 1.2.3.4
-m physdev --physdev-out eth1 -j SNAT --snat-to 1.2.3.5
For multicast case, only one of such conflicting mappings will be
created, conntrack only handles 1:1 NAT mappings.
Users should set create a setup that explicitly marks such traffic
NOTRACK (conntrack bypass) to avoid this, but we cannot auto-bypass
them, ruleset might have accept rules for untracked traffic already,
so user-visible behaviour would change. |
| In https://github.com/google/nftables IP addresses were encoded in the wrong byte order, resulting in an nftables configuration which does not work as intended (might block or not block the desired addresses).
This issue affects: https://pkg.go.dev/github.com/google/nftables@v0.1.0
The bug was fixed in the next released version: https://pkg.go.dev/github.com/google/nftables@v0.2.0 |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Wikimedia Foundation Mediawiki - MintyDocs Extension allows Stored XSS.This issue affects Mediawiki - MintyDocs Extension: from 1.43.X before 1.43.2. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: Run atomic i2c xfer when !preemptible
Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is
disabled. However, non-atomic i2c transfers require preemption (e.g. in
wait_for_completion() while waiting for the DMA).
panic() calls preempt_disable_notrace() before calling
emergency_restart(). Therefore, if an i2c device is used for the
restart, the xfer should be atomic. This avoids warnings like:
[ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0
[ 12.676926] Voluntary context switch within RCU read-side critical section!
...
[ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114
[ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70
...
[ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58
[ 13.001050] machine_restart from panic+0x2a8/0x32c
Use !preemptible() instead, which is basically the same check as
pre-v5.2. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: perf: Check find_first_bit() return value
We must check the return value of find_first_bit() before using the
return value as an index array since it happens to overflow the array
and then panic:
[ 107.318430] Kernel BUG [#1]
[ 107.319434] CPU: 3 PID: 1238 Comm: kill Tainted: G E 6.6.0-rc6ubuntu-defconfig #2
[ 107.319465] Hardware name: riscv-virtio,qemu (DT)
[ 107.319551] epc : pmu_sbi_ovf_handler+0x3a4/0x3ae
[ 107.319840] ra : pmu_sbi_ovf_handler+0x52/0x3ae
[ 107.319868] epc : ffffffff80a0a77c ra : ffffffff80a0a42a sp : ffffaf83fecda350
[ 107.319884] gp : ffffffff823961a8 tp : ffffaf8083db1dc0 t0 : ffffaf83fecda480
[ 107.319899] t1 : ffffffff80cafe62 t2 : 000000000000ff00 s0 : ffffaf83fecda520
[ 107.319921] s1 : ffffaf83fecda380 a0 : 00000018fca29df0 a1 : ffffffffffffffff
[ 107.319936] a2 : 0000000001073734 a3 : 0000000000000004 a4 : 0000000000000000
[ 107.319951] a5 : 0000000000000040 a6 : 000000001d1c8774 a7 : 0000000000504d55
[ 107.319965] s2 : ffffffff82451f10 s3 : ffffffff82724e70 s4 : 000000000000003f
[ 107.319980] s5 : 0000000000000011 s6 : ffffaf8083db27c0 s7 : 0000000000000000
[ 107.319995] s8 : 0000000000000001 s9 : 00007fffb45d6558 s10: 00007fffb45d81a0
[ 107.320009] s11: ffffaf7ffff60000 t3 : 0000000000000004 t4 : 0000000000000000
[ 107.320023] t5 : ffffaf7f80000000 t6 : ffffaf8000000000
[ 107.320037] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[ 107.320081] [<ffffffff80a0a77c>] pmu_sbi_ovf_handler+0x3a4/0x3ae
[ 107.320112] [<ffffffff800b42d0>] handle_percpu_devid_irq+0x9e/0x1a0
[ 107.320131] [<ffffffff800ad92c>] generic_handle_domain_irq+0x28/0x36
[ 107.320148] [<ffffffff8065f9f8>] riscv_intc_irq+0x36/0x4e
[ 107.320166] [<ffffffff80caf4a0>] handle_riscv_irq+0x54/0x86
[ 107.320189] [<ffffffff80cb0036>] do_irq+0x64/0x96
[ 107.320271] Code: 85a6 855e b097 ff7f 80e7 9220 b709 9002 4501 bbd9 (9002) 6097
[ 107.320585] ---[ end trace 0000000000000000 ]---
[ 107.320704] Kernel panic - not syncing: Fatal exception in interrupt
[ 107.320775] SMP: stopping secondary CPUs
[ 107.321219] Kernel Offset: 0x0 from 0xffffffff80000000
[ 107.333051] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: pcrypt - Fix hungtask for PADATA_RESET
We found a hungtask bug in test_aead_vec_cfg as follows:
INFO: task cryptomgr_test:391009 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Call trace:
__switch_to+0x98/0xe0
__schedule+0x6c4/0xf40
schedule+0xd8/0x1b4
schedule_timeout+0x474/0x560
wait_for_common+0x368/0x4e0
wait_for_completion+0x20/0x30
wait_for_completion+0x20/0x30
test_aead_vec_cfg+0xab4/0xd50
test_aead+0x144/0x1f0
alg_test_aead+0xd8/0x1e0
alg_test+0x634/0x890
cryptomgr_test+0x40/0x70
kthread+0x1e0/0x220
ret_from_fork+0x10/0x18
Kernel panic - not syncing: hung_task: blocked tasks
For padata_do_parallel, when the return err is 0 or -EBUSY, it will call
wait_for_completion(&wait->completion) in test_aead_vec_cfg. In normal
case, aead_request_complete() will be called in pcrypt_aead_serial and the
return err is 0 for padata_do_parallel. But, when pinst->flags is
PADATA_RESET, the return err is -EBUSY for padata_do_parallel, and it
won't call aead_request_complete(). Therefore, test_aead_vec_cfg will
hung at wait_for_completion(&wait->completion), which will cause
hungtask.
The problem comes as following:
(padata_do_parallel) |
rcu_read_lock_bh(); |
err = -EINVAL; | (padata_replace)
| pinst->flags |= PADATA_RESET;
err = -EBUSY |
if (pinst->flags & PADATA_RESET) |
rcu_read_unlock_bh() |
return err
In order to resolve the problem, we replace the return err -EBUSY with
-EAGAIN, which means parallel_data is changing, and the caller should call
it again.
v3:
remove retry and just change the return err.
v2:
introduce padata_try_do_parallel() in pcrypt_aead_encrypt and
pcrypt_aead_decrypt to solve the hungtask. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Wikimedia Foundation Mediawiki - MintyDocs Extension allows Stored XSS.This issue affects Mediawiki - MintyDocs Extension: from 1.43.X before 1.43.2. |
| When Bazel Plugin in intellij imports a project (either using "import project" or "Auto import") the dialog for trusting the project is not displayed. This comes from the fact that both call the method ProjectBuilder.createProject which then calls ProjectManager.getInstance().createProject. This method, as its name suggests is intended to create a new project, not to import an existing one.
We recommend upgrading to version 2024.06.04.0.2 or beyond for the IntelliJ, CLion and Android Studio Bazel plugins. |
| A vulnerability classified as critical has been found in Codezips Internal Marks Calculation 1.0. Affected is an unknown function of the file index.php. The manipulation of the argument tid leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| An issue was discovered in Exasol JDBC driver before 24.2.1 (2024-12-10). Attackers can inject malicious parameters into the JDBC URL, triggering JNDI injection during the process when the JDBC Driver uses this URL to connect to the database. This can further lead to remote code execution. |
| IBM MQ 9.3 LTS, 9.3 CD, 9.4 LTS, and 9.4 CD
could allow a local user to cause a denial of service due to an improper check for unusual or exceptional conditions. |
| Zohocorp ManageEngine Analytics Plus versions below 6100 are vulnerable to authenticated sensitive data exposure which allows the users to retrieve sensitive tokens associated to the org-admin account. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: make sure active queue usage is held for bio_integrity_prep()
blk_integrity_unregister() can come if queue usage counter isn't held
for one bio with integrity prepared, so this request may be completed with
calling profile->complete_fn, then kernel panic.
Another constraint is that bio_integrity_prep() needs to be called
before bio merge.
Fix the issue by:
- call bio_integrity_prep() with one queue usage counter grabbed reliably
- call bio_integrity_prep() before bio merge |
| In the Linux kernel, the following vulnerability has been resolved:
misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume
When not configured for wakeup lis3lv02d_i2c_suspend() will call
lis3lv02d_poweroff() even if the device has already been turned off
by the runtime-suspend handler and if configured for wakeup and
the device is runtime-suspended at this point then it is not turned
back on to serve as a wakeup source.
Before commit b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting
of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable
the regulators which as a side effect made calling poweroff() twice ok.
Now that poweroff() correctly disables the regulators, doing this twice
triggers a WARN() in the regulator core:
unbalanced disables for regulator-dummy
WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable
...
Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if
already runtime-suspended and add a poweron() call when necessary to
make wakeup work.
lis3lv02d_i2c_resume() has similar issues, with an added weirness that
it always powers on the device if it is runtime suspended, after which
the first runtime-resume will call poweron() again, causing the enabled
count for the regulator to increase by 1 every suspend/resume. These
unbalanced regulator_enable() calls cause the regulator to never
be turned off and trigger the following WARN() on driver unbind:
WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put
Fix this by making lis3lv02d_i2c_resume() mirror the new suspend(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: take ownership of skb in mctp_local_output
Currently, mctp_local_output only takes ownership of skb on success, and
we may leak an skb if mctp_local_output fails in specific states; the
skb ownership isn't transferred until the actual output routing occurs.
Instead, make mctp_local_output free the skb on all error paths up to
the route action, so it always consumes the passed skb. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: fix PPE hanging issue
A patch to resolve an issue was found in MediaTek's GPL-licensed SDK:
In the mtk_ppe_stop() function, the PPE scan mode is not disabled before
disabling the PPE. This can potentially lead to a hang during the process
of disabling the PPE.
Without this patch, the PPE may experience a hang during the reboot test. |
