| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Prevent panic when SDMA is disabled
If the hfi1 module is loaded with HFI1_CAP_SDMA off, a call to
hfi1_write_iter() will dereference a NULL pointer and panic. A typical
stack frame is:
sdma_select_user_engine [hfi1]
hfi1_user_sdma_process_request [hfi1]
hfi1_write_iter [hfi1]
do_iter_readv_writev
do_iter_write
vfs_writev
do_writev
do_syscall_64
The fix is to test for SDMA in hfi1_write_iter() and fail the I/O with
EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bug_on in ext4_writepages
we got issue as follows:
EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls
------------[ cut here ]------------
kernel BUG at fs/ext4/inode.c:2708!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155
RIP: 0010:ext4_writepages+0x1977/0x1c10
RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000
RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002
RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000
R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001
R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028
FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
do_writepages+0x130/0x3a0
filemap_fdatawrite_wbc+0x83/0xa0
filemap_flush+0xab/0xe0
ext4_alloc_da_blocks+0x51/0x120
__ext4_ioctl+0x1534/0x3210
__x64_sys_ioctl+0x12c/0x170
do_syscall_64+0x3b/0x90
It may happen as follows:
1. write inline_data inode
vfs_write
new_sync_write
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
ext4_da_write_inline_data_begin -> If inline data size too
small will allocate block to write, then mapping will has
dirty page
ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA
2. fallocate
do_vfs_ioctl
ioctl_preallocate
vfs_fallocate
ext4_fallocate
ext4_convert_inline_data
ext4_convert_inline_data_nolock
ext4_map_blocks -> fail will goto restore data
ext4_restore_inline_data
ext4_create_inline_data
ext4_write_inline_data
ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA
3. writepages
__ext4_ioctl
ext4_alloc_da_blocks
filemap_flush
filemap_fdatawrite_wbc
do_writepages
ext4_writepages
if (ext4_has_inline_data(inode))
BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))
The root cause of this issue is we destory inline data until call
ext4_writepages under delay allocation mode. But there maybe already
convert from inline to extent. To solve this issue, we call
filemap_flush first.. |
| In the Linux kernel, the following vulnerability has been resolved:
mips: cpc: Fix refcount leak in mips_cpc_default_phys_base
Add the missing of_node_put() to release the refcount incremented
by of_find_compatible_node(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3: check return value after calling platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop()
There is a deadlock in rtllib_beacons_stop(), which is shown
below:
(Thread 1) | (Thread 2)
| rtllib_send_beacon()
rtllib_beacons_stop() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | rtllib_send_beacon_cb()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold ieee->beacon_lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need ieee->beacon_lock in position (2) of thread 2.
As a result, rtllib_beacons_stop() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: Fix a possible resource leak in icom_probe
When pci_read_config_dword failed, call pci_release_regions() and
pci_disable_device() to recycle the resource previously allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: usb: host: Fix deadlock in oxu_bus_suspend()
There is a deadlock in oxu_bus_suspend(), which is shown below:
(Thread 1) | (Thread 2)
| timer_action()
oxu_bus_suspend() | mod_timer()
spin_lock_irq() //(1) | (wait a time)
... | oxu_watchdog()
del_timer_sync() | spin_lock_irq() //(2)
(wait timer to stop) | ...
We hold oxu->lock in position (1) of thread 1, and use
del_timer_sync() to wait timer to stop, but timer handler
also need oxu->lock in position (2) of thread 2. As a result,
oxu_bus_suspend() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irq(), which could let timer handler to obtain
the needed lock. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8712: fix a potential memory leak in r871xu_drv_init()
In r871xu_drv_init(), if r8712_init_drv_sw() fails, then the memory
allocated by r8712_alloc_io_queue() in r8712_usb_dvobj_init() is not
properly released as there is no action will be performed by
r8712_usb_dvobj_deinit().
To properly release it, we should call r8712_free_io_queue() in
r8712_usb_dvobj_deinit().
Besides, in r871xu_dev_remove(), r8712_usb_dvobj_deinit() will be called
by r871x_dev_unload() under condition `padapter->bup` and
r8712_free_io_queue() is called by r8712_free_drv_sw().
However, r8712_usb_dvobj_deinit() does not rely on `padapter->bup` and
calling r8712_free_io_queue() in r8712_free_drv_sw() is negative for
better understading the code.
So I move r8712_usb_dvobj_deinit() into r871xu_dev_remove(), and remove
r8712_free_io_queue() from r8712_free_drv_sw(). |
| In the Linux kernel, the following vulnerability has been resolved:
extcon: Modify extcon device to be created after driver data is set
Currently, someone can invoke the sysfs such as state_show()
intermittently before dev_set_drvdata() is done.
And it can be a cause of kernel Oops because of edev is Null at that time.
So modified the driver registration to after setting drviver data.
- Oops's backtrace.
Backtrace:
[<c067865c>] (state_show) from [<c05222e8>] (dev_attr_show)
[<c05222c0>] (dev_attr_show) from [<c02c66e0>] (sysfs_kf_seq_show)
[<c02c6648>] (sysfs_kf_seq_show) from [<c02c496c>] (kernfs_seq_show)
[<c02c4938>] (kernfs_seq_show) from [<c025e2a0>] (seq_read)
[<c025e11c>] (seq_read) from [<c02c50a0>] (kernfs_fop_read)
[<c02c5064>] (kernfs_fop_read) from [<c0231cac>] (__vfs_read)
[<c0231c5c>] (__vfs_read) from [<c0231ee0>] (vfs_read)
[<c0231e34>] (vfs_read) from [<c0232464>] (ksys_read)
[<c02323f0>] (ksys_read) from [<c02324fc>] (sys_read)
[<c02324e4>] (sys_read) from [<c00091d0>] (__sys_trace_return) |
| In the Linux kernel, the following vulnerability has been resolved:
tty: synclink_gt: Fix null-pointer-dereference in slgt_clean()
When the driver fails at alloc_hdlcdev(), and then we remove the driver
module, we will get the following splat:
[ 25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI
[ 25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17]
[ 25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0
[ 25.077709] Call Trace:
[ 25.077924] <TASK>
[ 25.078108] unregister_hdlc_device+0x16/0x30
[ 25.078481] slgt_cleanup+0x157/0x9f0 [synclink_gt]
Fix this by checking whether the 'info->netdev' is a null pointer first. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: staging: rtl8192u: Fix deadlock in ieee80211_beacons_stop()
There is a deadlock in ieee80211_beacons_stop(), which is shown below:
(Thread 1) | (Thread 2)
| ieee80211_send_beacon()
ieee80211_beacons_stop() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | ieee80211_send_beacon_cb()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold ieee->beacon_lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler
also need ieee->beacon_lock in position (2) of thread 2.
As a result, ieee80211_beacons_stop() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: tty: serial: Fix deadlock in sa1100_set_termios()
There is a deadlock in sa1100_set_termios(), which is shown
below:
(Thread 1) | (Thread 2)
| sa1100_enable_ms()
sa1100_set_termios() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | sa1100_timeout()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold sport->port.lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need sport->port.lock in position (2) of thread 2. As a result,
sa1100_set_termios() will block forever.
This patch moves del_timer_sync() before spin_lock_irqsave()
in order to prevent the deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: staging: rtl8192eu: Fix deadlock in rtw_joinbss_event_prehandle
There is a deadlock in rtw_joinbss_event_prehandle(), which is shown below:
(Thread 1) | (Thread 2)
| _set_timer()
rtw_joinbss_event_prehandle()| mod_timer()
spin_lock_bh() //(1) | (wait a time)
... | rtw_join_timeout_handler()
| _rtw_join_timeout_handler()
del_timer_sync() | spin_lock_bh() //(2)
(wait timer to stop) | ...
We hold pmlmepriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_joinbss_event_prehandle() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() to
spin_lock_irq() in _rtw_join_timeout_handler() in order to
prevent deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: host: isp116x: check return value after calling platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8712: fix uninit-value in usb_read8() and friends
When r8712_usbctrl_vendorreq() returns negative, 'data' in
usb_read{8,16,32} will not be initialized.
BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:643 [inline]
BUG: KMSAN: uninit-value in string+0x4ec/0x6f0 lib/vsprintf.c:725
string_nocheck lib/vsprintf.c:643 [inline]
string+0x4ec/0x6f0 lib/vsprintf.c:725
vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806
va_format lib/vsprintf.c:1704 [inline]
pointer+0x18e6/0x1f70 lib/vsprintf.c:2443
vsnprintf+0x1a9b/0x3650 lib/vsprintf.c:2810
vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158
vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256
dev_vprintk_emit+0x5ef/0x6d0 drivers/base/core.c:4604
dev_printk_emit+0x1dd/0x21f drivers/base/core.c:4615
__dev_printk+0x3be/0x440 drivers/base/core.c:4627
_dev_info+0x1ea/0x22f drivers/base/core.c:4673
r871xu_drv_init+0x1929/0x3070 drivers/staging/rtl8712/usb_intf.c:401
usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
really_probe+0x6c7/0x1350 drivers/base/dd.c:621
__driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
driver_probe_device drivers/base/dd.c:782 [inline]
__device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
__device_attach+0x593/0x8e0 drivers/base/dd.c:970
device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
device_add+0x1fff/0x26e0 drivers/base/core.c:3405
usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170
usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238
usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293
really_probe+0x6c7/0x1350 drivers/base/dd.c:621
__driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
driver_probe_device drivers/base/dd.c:782 [inline]
__device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
__device_attach+0x593/0x8e0 drivers/base/dd.c:970
device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
device_add+0x1fff/0x26e0 drivers/base/core.c:3405
usb_new_device+0x1b91/0x2950 drivers/usb/core/hub.c:2566
hub_port_connect drivers/usb/core/hub.c:5363 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5507 [inline]
port_event drivers/usb/core/hub.c:5665 [inline]
hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5747
process_one_work+0xdb6/0x1820 kernel/workqueue.c:2289
worker_thread+0x10d0/0x2240 kernel/workqueue.c:2436
kthread+0x3c7/0x500 kernel/kthread.c:376
ret_from_fork+0x1f/0x30
Local variable data created at:
usb_read8+0x5d/0x130 drivers/staging/rtl8712/usb_ops.c:33
r8712_read8+0xa5/0xd0 drivers/staging/rtl8712/rtl8712_io.c:29
KMSAN: uninit-value in r871xu_drv_init
https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8 |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: fix race between nbd_alloc_config() and module removal
When nbd module is being removing, nbd_alloc_config() may be
called concurrently by nbd_genl_connect(), although try_module_get()
will return false, but nbd_alloc_config() doesn't handle it.
The race may lead to the leak of nbd_config and its related
resources (e.g, recv_workq) and oops in nbd_read_stat() due
to the unload of nbd module as shown below:
BUG: kernel NULL pointer dereference, address: 0000000000000040
Oops: 0000 [#1] SMP PTI
CPU: 5 PID: 13840 Comm: kworker/u17:33 Not tainted 5.14.0+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: knbd16-recv recv_work [nbd]
RIP: 0010:nbd_read_stat.cold+0x130/0x1a4 [nbd]
Call Trace:
recv_work+0x3b/0xb0 [nbd]
process_one_work+0x1ed/0x390
worker_thread+0x4a/0x3d0
kthread+0x12a/0x150
ret_from_fork+0x22/0x30
Fixing it by checking the return value of try_module_get()
in nbd_alloc_config(). As nbd_alloc_config() may return ERR_PTR(-ENODEV),
assign nbd->config only when nbd_alloc_config() succeeds to ensure
the value of nbd->config is binary (valid or NULL).
Also adding a debug message to check the reference counter
of nbd_config during module removal. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8712: fix uninit-value in r871xu_drv_init()
When 'tmpU1b' returns from r8712_read8(padapter, EE_9346CR) is 0,
'mac[6]' will not be initialized.
BUG: KMSAN: uninit-value in r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541
r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541
usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
really_probe+0x653/0x14b0 drivers/base/dd.c:596
__driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
driver_probe_device drivers/base/dd.c:782 [inline]
__device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
__device_attach+0x593/0x8e0 drivers/base/dd.c:970
device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
device_add+0x1fff/0x26e0 drivers/base/core.c:3405
usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170
usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238
usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293
really_probe+0x653/0x14b0 drivers/base/dd.c:596
__driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
driver_probe_device drivers/base/dd.c:782 [inline]
__device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
__device_attach+0x593/0x8e0 drivers/base/dd.c:970
device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
device_add+0x1fff/0x26e0 drivers/base/core.c:3405
usb_new_device+0x1b8e/0x2950 drivers/usb/core/hub.c:2566
hub_port_connect drivers/usb/core/hub.c:5358 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5502 [inline]
port_event drivers/usb/core/hub.c:5660 [inline]
hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5742
process_one_work+0xdb6/0x1820 kernel/workqueue.c:2307
worker_thread+0x10b3/0x21e0 kernel/workqueue.c:2454
kthread+0x3c7/0x500 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
Local variable mac created at:
r871xu_drv_init+0x1771/0x3070 drivers/staging/rtl8712/usb_intf.c:394
usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
KMSAN: uninit-value in r871xu_drv_init
https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: oss: Fix PCM OSS buffer allocation overflow
We've got syzbot reports hitting INT_MAX overflow at vmalloc()
allocation that is called from snd_pcm_plug_alloc(). Although we
apply the restrictions to input parameters, it's based only on the
hw_params of the underlying PCM device. Since the PCM OSS layer
allocates a temporary buffer for the data conversion, the size may
become unexpectedly large when more channels or higher rates is given;
in the reported case, it went over INT_MAX, hence it hits WARN_ON().
This patch is an attempt to avoid such an overflow and an allocation
for too large buffers. First off, it adds the limit of 1MB as the
upper bound for period bytes. This must be large enough for all use
cases, and we really don't want to handle a larger temporary buffer
than this size. The size check is performed at two places, where the
original period bytes is calculated and where the plugin buffer size
is calculated.
In addition, the driver uses array_size() and array3_size() for
multiplications to catch overflows for the converted period size and
buffer bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls
Currently we have neither proper check nor protection against the
concurrent calls of PCM hw_params and hw_free ioctls, which may result
in a UAF. Since the existing PCM stream lock can't be used for
protecting the whole ioctl operations, we need a new mutex to protect
those racy calls.
This patch introduced a new mutex, runtime->buffer_mutex, and applies
it to both hw_params and hw_free ioctl code paths. Along with it, the
both functions are slightly modified (the mmap_count check is moved
into the state-check block) for code simplicity. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Fix races among concurrent prealloc proc writes
We have no protection against concurrent PCM buffer preallocation
changes via proc files, and it may potentially lead to UAF or some
weird problem. This patch applies the PCM open_mutex to the proc
write operation for avoiding the racy proc writes and the PCM stream
open (and further operations). |
