| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An unauthenticated remote attacker can execute OS commands via UDP on the device due to missing authentication. |
| A stack based buffer overflow vulnerability is present in OpenPrinting ippusbxd 1.34. A specially configured printer that supports IPP-over-USB can cause a buffer overflow which can lead to a arbitrary code execution in a privileged service. To trigger the vulnerability, a malicious device would need to be connected to the vulnerable system over USB. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Fix RX buf alloc_size alignment and atomic op panic
The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to
create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment
is affected by the alloc_size passed into napi_build_skb(). The size needs
to be aligned properly for better performance and atomic operations.
Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic
operations may panic on the skb_shinfo(skb)->dataref due to alignment fault.
To fix this bug, add proper alignment to the alloc_size calculation.
Sample panic info:
[ 253.298819] Unable to handle kernel paging request at virtual address ffff000129ba5cce
[ 253.300900] Mem abort info:
[ 253.301760] ESR = 0x0000000096000021
[ 253.302825] EC = 0x25: DABT (current EL), IL = 32 bits
[ 253.304268] SET = 0, FnV = 0
[ 253.305172] EA = 0, S1PTW = 0
[ 253.306103] FSC = 0x21: alignment fault
Call trace:
__skb_clone+0xfc/0x198
skb_clone+0x78/0xe0
raw6_local_deliver+0xfc/0x228
ip6_protocol_deliver_rcu+0x80/0x500
ip6_input_finish+0x48/0x80
ip6_input+0x48/0xc0
ip6_sublist_rcv_finish+0x50/0x78
ip6_sublist_rcv+0x1cc/0x2b8
ipv6_list_rcv+0x100/0x150
__netif_receive_skb_list_core+0x180/0x220
netif_receive_skb_list_internal+0x198/0x2a8
__napi_poll+0x138/0x250
net_rx_action+0x148/0x330
handle_softirqs+0x12c/0x3a0 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG
When BPF_TRAMP_F_CALL_ORIG is set, the trampoline calls
__bpf_tramp_enter() and __bpf_tramp_exit() functions, passing them
the struct bpf_tramp_image *im pointer as an argument in R0.
The trampoline generation code uses emit_addr_mov_i64() to emit
instructions for moving the bpf_tramp_image address into R0, but
emit_addr_mov_i64() assumes the address to be in the vmalloc() space
and uses only 48 bits. Because bpf_tramp_image is allocated using
kzalloc(), its address can use more than 48-bits, in this case the
trampoline will pass an invalid address to __bpf_tramp_enter/exit()
causing a kernel crash.
Fix this by using emit_a64_mov_i64() in place of emit_addr_mov_i64()
as it can work with addresses that are greater than 48-bits. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Handle invalid decoder vsi
Handle an invalid decoder vsi in vpu_dec_init to ensure the decoder vsi
is valid for future use. |
| Send is a library for streaming files from the file system as a http response. Send passes untrusted user input to SendStream.redirect() which executes untrusted code. This issue is patched in send 0.19.0. |
| Zabbix API user.get returns all users that share common group with the calling user. This includes media and other information, such as login attempts, etc. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add NULL pointer check for kzalloc
[Why & How]
Check return pointer of kzalloc before using it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Fix possible double free in error handling path
When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function adev_release
calls kfree(madev). We shouldn't call kfree(madev) again
in the error handling path. Set 'madev' to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-vcodec: potential null pointer deference in SCP
The return value of devm_kzalloc() needs to be checked to avoid
NULL pointer deference. This is similar to CVE-2022-3113. |
| xrdp is an open source RDP server. xrdp versions prior to 0.10.0 have a vulnerability that allows attackers to make an infinite number of login attempts. The number of max login attempts is supposed to be limited by a configuration parameter `MaxLoginRetry` in `/etc/xrdp/sesman.ini`. However, this mechanism was not effectively working. As a result, xrdp allows an infinite number of login attempts. |
| Improper neutralization of input in Nagvis before version 1.9.47 which can lead to livestatus injection |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: et8ek8: Don't strip remove function when driver is builtin
Using __exit for the remove function results in the remove callback
being discarded with CONFIG_VIDEO_ET8EK8=y. When such a device gets
unbound (e.g. using sysfs or hotplug), the driver is just removed
without the cleanup being performed. This results in resource leaks. Fix
it by compiling in the remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: drivers/media/i2c/et8ek8/et8ek8: section mismatch in reference: et8ek8_i2c_driver+0x10 (section: .data) -> et8ek8_remove (section: .exit.text) |
| In the Linux kernel, the following vulnerability has been resolved:
of: module: add buffer overflow check in of_modalias()
In of_modalias(), if the buffer happens to be too small even for the 1st
snprintf() call, the len parameter will become negative and str parameter
(if not NULL initially) will point beyond the buffer's end. Add the buffer
overflow check after the 1st snprintf() call and fix such check after the
strlen() call (accounting for the terminating NUL char). |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine.
Mishandling of multiple fragmented packets using the same IP ID value can lead to packet reassembly failure, which can lead to policy bypass. Upgrade to 7.0.6 or 6.0.20. When using af-packet, enable `defrag` to reduce the scope of the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iocost: do not WARN if iocg was already offlined
In iocg_pay_debt(), warn is triggered if 'active_list' is empty, which
is intended to confirm iocg is active when it has debt. However, warn
can be triggered during a blkcg or disk removal, if iocg_waitq_timer_fn()
is run at that time:
WARNING: CPU: 0 PID: 2344971 at block/blk-iocost.c:1402 iocg_pay_debt+0x14c/0x190
Call trace:
iocg_pay_debt+0x14c/0x190
iocg_kick_waitq+0x438/0x4c0
iocg_waitq_timer_fn+0xd8/0x130
__run_hrtimer+0x144/0x45c
__hrtimer_run_queues+0x16c/0x244
hrtimer_interrupt+0x2cc/0x7b0
The warn in this situation is meaningless. Since this iocg is being
removed, the state of the 'active_list' is irrelevant, and 'waitq_timer'
is canceled after removing 'active_list' in ioc_pd_free(), which ensures
iocg is freed after iocg_waitq_timer_fn() returns.
Therefore, add the check if iocg was already offlined to avoid warn
when removing a blkcg or disk. |
| Execution time for an unsuccessful login differs when using a non-existing username compared to using an existing one. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group
The DisplayPort driver's sysfs nodes may be present to the userspace before
typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that
a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in
hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns
NULL in those cases.
Remove manual sysfs node creation in favor of adding attribute group as
default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is
not used here otherwise the path to the sysfs nodes is no longer compliant
with the ABI. |
| Improper Handling of Exceptional Conditions, Uncontrolled Resource Consumption vulnerability in Apache Tomcat. When processing an HTTP/2 stream, Tomcat did not handle some cases of excessive HTTP headers correctly. This led to a miscounting of active HTTP/2 streams which in turn led to the use of an incorrect infinite timeout which allowed connections to remain open which should have been closed.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M20, from 10.1.0-M1 through 10.1.24, from 9.0.0-M1 through 9.0.89.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.0-M21, 10.1.25 or 9.0.90, which fixes the issue. |
| An issue in OpenResty lua-nginx-module v.0.10.26 and before allows a remote attacker to conduct HTTP request smuggling via a crafted HEAD request. |
