| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: destroy the phylink instance on the probe error path
macb_mii_init() creates a phylink instance on both of its success paths,
but the probe unwind frees the netdev without destroying it, so a failing
macb_alloc_tieoff() or register_netdev() leaks the instance.
Destroy it at err_out_unregister_mdio, which is only reachable once
macb_mii_init() has succeeded, so bp->phylink is valid there. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmr: account multicast table and route memory
A netadmin in a user+net namespace can create many IPv4 and IPv6
multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen
id allocates an mr_table via the shared mr_table_alloc(), links it
into the per-net list, and leaves it until netns teardown. Those
objects were not charged to memcg, so the host unreclaimable slab
grows with the table count.
Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the
IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established
handling of IP addresses, routes and alternate interface names.
Unresolved MFC entries are still allocated from softIRQ with
GFP_ATOMIC and are not charged. They expire after 10 seconds and are
bounded by the socket receive queue; see commit 0079ad8e8dc3
("ipmr: remove hard code cache_resolve_queue_len limit"). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram the field rejected for a bad modifier
Writing a hist trigger whose value or variable carries a modifier that is
not allowed there leaks the fields that were built for it.
__create_val_field() takes the field from parse_expr() and stores it in
hist_data->fields[] only after the modifier checks have run:
hist_field = parse_expr(hist_data, file, field_str, flags, var_name,
&n_subexprs);
...
if (hist_field->flags & HIST_FIELD_FL_VAR) {
if (hist_field->flags & (...))
goto err;
} else {
if (hist_field->flags & (...))
goto err;
}
hist_data->fields[val_idx] = hist_field;
Both checks jump past that store, and the err label returns without
freeing anything. The error unwinds to create_hist_data(), which calls
destroy_hist_data() -> destroy_hist_fields(), and that reaches a field
only by walking fields[]. A field that never got there is unreachable.
commit e0213434fe3e ("tracing: Do not let histogram values have some
modifiers") set ret to -EINVAL and fell through to the store, which left
the field owned by fields[] and freed along with the rest of hist_data.
Splitting the check into a value case and a variable case replaced that
fall-through with a goto that skips it.
With CONFIG_DEBUG_KMEMLEAK, 200 writes of
# echo 'hist:keys=prev_pid:vals=next_pid.log2' > \
events/sched/sched_switch/trigger
each correctly rejected with -EINVAL, leave 332 unreferenced objects
(63744 bytes) reported at create_hist_field(); 200 install and remove
cycles of a valid trigger leave none. A '.log2' field is two
allocations, since create_hist_field() puts the plain field in
operands[0] of the log2 field, and both are reported.
Use destroy_hist_field() rather than __destroy_hist_field() so that
operands[0] is freed as well. It returns early for HIST_FIELD_FL_VAR_REF,
which is what an operand owned by hist_data->var_refs[] needs; the
rejected field itself is never a var ref, because a var ref never carries
a modifier flag. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: autofs: fix memory leak in autofs_fill_super()
In autofs_fill_super(), we create a new inode using
autofs_new_ino(), however, if we fail to create root_inode,
(that is, root_inode failure path), we return -ENOMEM without
freeing the new inode(ino) that we created causing a memory leak.
Fix this by adding autofs_free_ino() to free the inode we created
in root_inode failure path before returning ENOMEM. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: release all action references on NEWACTION failure
When a batched RTM_NEWACTION request replaces an existing action,
tcf_idr_check_alloc() takes a temporary reference on it. If a later
action fails to initialize, tcf_action_destroy() uses strict release
semantics to clean up the actions initialized so far. For an action
bound to a filter, the strict check returns -EPERM without dropping
the temporary reference.
This error also makes tcf_action_destroy() return before releasing
subsequent entries. Any new action initialized between the bound
action and the failing entry is leaked together with its reserved
IDR slot, preventing reuse of its index.
Use tcf_idr_release() to drop each reference held by the batch without
rejecting bound actions. This allows cleanup to continue through all
initialized entries and preserves the module reference release when
an action is destroyed. Explicit action deletion and flushing retain
their separate bind-count checks. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram the var ref when its initialization fails
create_var_ref() allocates a VAR_REF hist_field and then calls
init_var_ref() to fill it in. When that fails the field is leaked.
commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy
var_refs") made destroy_hist_field() return early for
HIST_FIELD_FL_VAR_REF, since var refs are freed by walking the trigger's
var_refs[] array instead. create_var_ref() adds the field to that array
only after init_var_ref() has succeeded, so on this path the field is in
neither place and nothing frees it. The call was correct when it was
written, before var refs were taken out of destroy_hist_field().
init_var_ref() cannot free it either. The caller owns the field, so
init_var_ref() undoes only its own string allocations and leaves the
field alone. Freeing it there would leave create_var_ref() passing freed
memory to destroy_hist_field(), which reads its flags.
Call __destroy_hist_field(), which frees the field without consulting
the flag. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: ifcvf: Put device on unsupported feature error
Route unsupported provisioned features through the common error path after
vdpa_alloc_device() so the allocated device and adapter pointer are
released consistently. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix memory leak in query_perf_config_list()
When krealloc() fails, free the original oa_config_ids before returning
to avoid a memory leak.
(cherry picked from commit 9977e9d84f46d4f12ad35fbbc0ec4638554bce87) |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: free learned nodes on device setup failure
hsr_dev_finalize() can fail after a lower-device RX handler has
already been registered (slave A is added before the failable slave B
and interlink adds). RX handlers run in softirq regardless of the
master's state, so frames received in that window can learn dynamic
nodes into node_db, and the error unwind never releases them.
Free both owned dynamic databases in the unwind, mirroring
hsr_dellink(). proxy_node_db is provably empty on every current error
exit (only interlink RX feeds it, and the interlink add is the last
failable step) and is freed for symmetry. The order is safe:
hsr_del_port() unregisters each RX handler with synchronize_net()
before hsr_del_nodes() runs, which removes remaining entries with
list_del_rcu() and defers their release with call_rcu() for readers
already under RCU. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: flowlabel: cap duplicate leases per socket
ipv6_flowlabel_get() allocates an ipv6_fl_socklist entry for every
successful GET. The recheck path for a compatible existing flowlabel
links another lease without applying any lease admission check. Repeated
GET requests for one shareable label can therefore grow a socket's lease
list without bound.
Reject a new unprivileged lease once the socket already holds
FL_MAX_PER_SOCK leases. Check this on the shared recheck path so reuse
of a globally interned label, including the fl_intern() collision path,
is covered as well. New-label admission remains under the existing
mem_check() policy.
Use capable(CAP_NET_ADMIN) rather than ns_capable(), matching
mem_check(). An unprivileged user must not bypass the cap by creating a
user namespace and a netns where they have CAP_NET_ADMIN, which would
still consume host memory.
Check the capability only when the socket reaches the limit, so
successful unprivileged GET requests below the cap do not generate a
capability audit. Do the admission check before updating linger and
expires so a rejected GET does not refresh the shared label, matching
the existing socket-list allocation failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: bound automatic table ID allocation
fib_empty_table() probes every table ID from 1 until it finds a
free one. IPv4 tables are stored in a 256-bucket hash table, so a
dense set of IDs makes each probe walk a growing hash chain while
RTNL is held.
Automatic table assignment ("ip rule ... table 0") is an IPv4-only
legacy path. Bound the automatically allocated ID to 4096 so the
RTNL hold stays bounded, without changing lookups of explicitly
specified table IDs.
This changes user-visible behavior. A table-0 rule previously
received the lowest free ID in 1..RT_TABLE_MAX (0xFFFFFFFF). After
this patch the search stops at 4096 and the rule add fails with
ENOBUFS if that range is fully occupied. Explicit table IDs above
4096 remain usable.
The automatic path is unused in practice: it is IPv4-only, not
documented by ip-rule, uncovered by kernel selftests, and both
NetworkManager and systemd refuse table 0. |
| Uncontrolled Resource Consumption (CWE-400 / CWE-407) in the ANTLR 3 search query parser (QueryParser / Query.g) in Gerrit Code Review versions 2.0.19 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an unauthenticated remote attacker (or an authenticated user if anonymous read access is disabled) to cause a persistent denial of service (CPU exhaustion and HTTP worker thread pool starvation requiring a server restart) via crafted search queries containing deeply nested parentheses sent to query evaluation endpoints (/changes/?q=, /accounts/?q=, /groups/?query=, /projects/?query=, /Documentation/?q=, /changes/{id}/query?expression=, or SSH gerrit query). Because syntactic predicates in conditionOr and conditionAnd recurse via conditionBase without memoization prior to capability or visibility checks and worker threads do not abort when the client disconnects, a small number of requests (such as 25 requests matching default httpd.maxThreads) can permanently pin all HTTP worker threads. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix the possible bioc_list memory leak during error
There are two possible ways to leak bioc memory on
btrfs_ordered_extent::bioc_list:
- An error occurred for btrfs_insert_one_raid_extent()
Then the function btrfs_insert_raid_extent() immediately return
without freeing any bioc in the bioc_list.
- An ordered extent hit an IO error
In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and
skip the call on btrfs_insert_raid_extent() completely.
Fix the problem by:
- Introduce a new helper, btrfs_cleanup_ordered_bioc_list()
Which will remove all bioc from the bioc_list, and release the bioc.
- Call the above helper for btrfs_insert_raid_extent()
So that the cleanup helper is always called no matter what.
- Call the above helper for btrfs_finish_one_ordered()
This is called just before the final release on the ordered extent.
This was reported by Sashiko when reviewing another patch. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close()
acp6x_pdm_dma_close() does not free the runtime->private_data buffer
allocated in acp6x_pdm_dma_open(). Add the missing kfree. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: unregister debugfs entries on teardown
ucsi_register() creates per-instance debugfs entries, but
ucsi_unregister() keeps them around until ucsi_destroy().
Drivers like ucsi_glink that unregister/register the same UCSI
instance across remoteproc restart then try to create an already
existing debugfs directory and log:
debugfs: 'pmic_glink.ucsi.0' already exists in 'ucsi'
Unregister debugfs entries as part of ucsi_unregister(), and
clear ucsi->debugfs after freeing it so repeated unregister
paths remain safe. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_route: free emptied bucket on filter move
route4_change can move an existing filter to a different top-level
bucket: route4_set_parms recomputes the handle from TCA_ROUTE4_TO/
FROM/IIF, and the handle-mismatch check is gated on the 'new' flag, so
for an existing filter the new handle may differ from the old one and
land in a different bucket. When this happens, the filter is unlinked
from the old bucket, but the bucket itself is never freed once it goes
empty. The stale empty bucket remains in head->table[], causing
route4_delete to report *last=false even after the last live filter is
gone. That pins the empty tcf_proto and causes a leak.
Fix this by refcounting the filters linked to a bucket and freeing the
bucket when the count drops to zero. The existing scan in route4_delete
goes away with it.
The count is updated at all sites that link or unlink a filter during add,
change and delete, and the bucket is dropped from head->table[] as soon as
it reaches zero.
Conditions to recreate the bug:
CONFIG_NET_CLS_ROUTE4=y, CONFIG_NET_SCH_INGRESS=y, CONFIG_NET_CLS_ACT=y.
tc qdisc replace dev lo clsact
tc filter add dev lo ingress protocol ip pref 100 route from 1 to 1
tc filter change dev lo ingress protocol ip pref 100 handle 0x10001 \
route from 1 to 2
tc filter del dev lo ingress protocol ip pref 100 handle 0x10002 \
route from 1 to 2
tc filter show dev lo ingress | grep -c 'pref 100 route chain 0 ' |
| Improper handling of compressed data in the shared GZIP decompressor used for AMQP 0-8/0-9/0-9-1 and AMQP 0-10 message delivery, message conversion and HTTP management JSON rendering allows authenticated message producers to exhaust memory and disrupt broker availability via processing without a decompressed-output limit.
This issue affects Apache Qpid Broker-J: through 10.1.0.
Users are recommended to upgrade to version 10.1.1, which fixes the issue. |
| zbateson/mail-mime-parser is a mail mime parser alternative to PHP's imap* functions and Pear libraries for reading messages in Internet Message Format RFC 822. Starting in version 2.0.0 and prior to version 3.0.6 and 4.0.2, an uncontrolled resource consumption / algorithmic complexity vulnerability (CWE-400) affects any application that parses untrusted email with this library. Three independent parsing paths are super-linear in cost, so a byte-size cap on the caller side does **not** bound the work done. A crafted message under 2 MB can consume seconds of CPU or hundreds of megabytes to multiple gigabytes of memory (leading to an out-of-memory kill), enabling denial of service. The parse is lazy, but the cost is paid on the first `getAllParts()` or content read. This is fxed in 4.0.2 and 3.0.6. The fixes add configurable limits on multipart nesting depth and on header count / total header size (recording a parse error past the threshold rather than throwing), and change sibling append to O(n). Users should upgrade to one of these (or later) versions. Versions 2.x are also affected but are end-of-life and will not receive patches; users on those lines should upgrade to a fixed release. (Versions prior to 2.0 used a different parser and are not affected by all three paths.) These costs are super-linear, so an input byte-size cap alone does not bound them. Until upgrading, restrict exposure of the parser to untrusted input, and run parsing under a constrained memory_limit and execution time limit so a malicious message fails its own request rather than exhausting the host. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
mpi3mr_get_tgtdev_by_addr() increments the target device kref when it
returns a device. If a subsequent error triggers a goto out_fail after
the tgtdev reference is acquired, the reference is never released
because the out_fail path does not call mpi3mr_tgtdev_put(). This
prevents the target device structure from ever being freed.
Add a tgtdev put in the out_fail path, guarded by a NULL check since
tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup
path is shared by earlier error cases where tgtdev is still NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: core: Abort active target transfer on controller suspend
When an SPI controller operating in target mode has a transfer in
progress at the time of system suspend, the suspend path proceeds
without aborting the ongoing transfer. This can leave the hardware in
an inconsistent state, potentially causing the system to hang or fail
to resume cleanly.
Fix this by invoking the controller's target_abort callback from
spi_controller_suspend() when the controller is in target mode and the
callback is registered. This ensures any active target transfer is
cleanly terminated before the controller is suspended. |
