| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: unlink NAPIs from queues on error to open
CI hit a UaF in fbnic in the AF_XDP portion of the queues.py test.
The UaF is in the __sk_mark_napi_id_once() call in xsk_bind(),
NAPI has been freed. Looks like the device failed to open earlier,
and we lack clearing the NAPI pointer from the queue. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix inode use after free in ext4_end_io_rsv_work()
In ext4_io_end_defer_completion(), check if io_end->list_vec is empty to
avoid adding an io_end that requires no conversion to the
i_rsv_conversion_list, which in turn prevents starting an unnecessary
worker. An ext4_emergency_state() check is also added to avoid attempting
to abort the journal in an emergency state.
Additionally, ext4_put_io_end_defer() is refactored to call
ext4_io_end_defer_completion() directly instead of being open-coded.
This also prevents starting an unnecessary worker when EXT4_IO_END_FAILED
is set but data_err=abort is not enabled.
This ensures that the check in ext4_put_io_end_defer() is consistent with
the check in ext4_end_bio(). Otherwise, we might add an io_end to the
i_rsv_conversion_list and then call ext4_finish_bio(), after which the
inode could be freed before ext4_end_io_rsv_work() is called, triggering
a use-after-free issue. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix double destruction of rsv_qp
rsv_qp may be double destroyed in error flow, first in free_mr_init(),
and then in hns_roce_exit(). Fix it by moving the free_mr_init() call
into hns_roce_v2_init().
list_del corruption, ffff589732eb9b50->next is LIST_POISON1 (dead000000000100)
WARNING: CPU: 8 PID: 1047115 at lib/list_debug.c:53 __list_del_entry_valid+0x148/0x240
...
Call trace:
__list_del_entry_valid+0x148/0x240
hns_roce_qp_remove+0x4c/0x3f0 [hns_roce_hw_v2]
hns_roce_v2_destroy_qp_common+0x1dc/0x5f4 [hns_roce_hw_v2]
hns_roce_v2_destroy_qp+0x22c/0x46c [hns_roce_hw_v2]
free_mr_exit+0x6c/0x120 [hns_roce_hw_v2]
hns_roce_v2_exit+0x170/0x200 [hns_roce_hw_v2]
hns_roce_exit+0x118/0x350 [hns_roce_hw_v2]
__hns_roce_hw_v2_init_instance+0x1c8/0x304 [hns_roce_hw_v2]
hns_roce_hw_v2_reset_notify_init+0x170/0x21c [hns_roce_hw_v2]
hns_roce_hw_v2_reset_notify+0x6c/0x190 [hns_roce_hw_v2]
hclge_notify_roce_client+0x6c/0x160 [hclge]
hclge_reset_rebuild+0x150/0x5c0 [hclge]
hclge_reset+0x10c/0x140 [hclge]
hclge_reset_subtask+0x80/0x104 [hclge]
hclge_reset_service_task+0x168/0x3ac [hclge]
hclge_service_task+0x50/0x100 [hclge]
process_one_work+0x250/0x9a0
worker_thread+0x324/0x990
kthread+0x190/0x210
ret_from_fork+0x10/0x18 |
| A junction point vulnerability within AMD uProf can allow a local low-privileged attacker to create junction points, potentially resulting in arbitrary file deletion or disclosure. |
| Improper input validation within AMD uProf can allow a local attacker to write out of bounds, potentially resulting in a crash or denial of service |
| Improper input validation within AMD uprof can allow a local attacker to overwrite MSR registers, potentially resulting in crash or denial of service. |
| Improper return value within AMD uProf can allow a local attacker to bypass KSLR, potentially resulting in loss of confidentiality or availability. |
| Improper input validation within AMD uprof can allow a local attacker to write to an arbitrary physical address, potentially resulting in crash or denial of service. |
| LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From version 1.6.0 to before 1.6.51, an out-of-bounds read vulnerability exists in png_image_read_composite when processing palette images with PNG_FLAG_OPTIMIZE_ALPHA enabled. The palette compositing code in png_init_read_transformations incorrectly applies background compositing during premultiplication, violating the invariant component ≤ alpha × 257 required by the simplified PNG API. This issue has been patched in version 1.6.51. |
| LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From version 1.6.0 to before 1.6.51, there is a heap buffer overflow vulnerability in the libpng simplified API function png_image_finish_read when processing 16-bit interlaced PNGs with 8-bit output format. Attacker-crafted interlaced PNG files cause heap writes beyond allocated buffer bounds. This issue has been patched in version 1.6.51. |
| LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From version 1.6.0 to before 1.6.51, a heap buffer over-read vulnerability exists in libpng's png_write_image_8bit function when processing 8-bit images through the simplified write API with convert_to_8bit enabled. The vulnerability affects 8-bit grayscale+alpha, RGB/RGBA, and images with incomplete row data. A conditional guard incorrectly allows 8-bit input to enter code expecting 16-bit input, causing reads up to 2 bytes beyond allocated buffer boundaries. This issue has been patched in version 1.6.51. |
| LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. Prior to version 1.6.51, a heap buffer over-read vulnerability exists in libpng's png_do_quantize function when processing PNG files with malformed palette indices. The vulnerability occurs when palette_lookup array bounds are not validated against externally-supplied image data, allowing an attacker to craft a PNG file with out-of-range palette indices that trigger out-of-bounds memory access. This issue has been patched in version 1.6.51. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Pass ab pointer directly to ath12k_dp_tx_get_encap_type()
In ath12k_dp_tx_get_encap_type(), the arvif parameter is only used to
retrieve the ab pointer. In vdev delete sequence the arvif->ar could
become NULL and that would trigger kernel panic.
Since the caller ath12k_dp_tx() already has a valid ab pointer, pass it
directly to avoid panic and unnecessary dereferencing.
PC points to "ath12k_dp_tx+0x228/0x988 [ath12k]"
LR points to "ath12k_dp_tx+0xc8/0x988 [ath12k]".
The Backtrace obtained is as follows:
ath12k_dp_tx+0x228/0x988 [ath12k]
ath12k_mac_tx_check_max_limit+0x608/0x920 [ath12k]
ieee80211_process_measurement_req+0x320/0x348 [mac80211]
ieee80211_tx_dequeue+0x9ac/0x1518 [mac80211]
ieee80211_tx_dequeue+0xb14/0x1518 [mac80211]
ieee80211_tx_prepare_skb+0x224/0x254 [mac80211]
ieee80211_xmit+0xec/0x100 [mac80211]
__ieee80211_subif_start_xmit+0xc50/0xf40 [mac80211]
ieee80211_subif_start_xmit+0x2e8/0x308 [mac80211]
netdev_start_xmit+0x150/0x18c
dev_hard_start_xmit+0x74/0xc0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: vop2: fail cleanly if missing a primary plane for a video-port
Each window of a vop2 is usable by a specific set of video ports, so while
binding the vop2, we look through the list of available windows trying to
find one designated as primary-plane and usable by that specific port.
The code later wants to use drm_crtc_init_with_planes with that found
primary plane, but nothing has checked so far if a primary plane was
actually found.
For whatever reason, the rk3576 vp2 does not have a usable primary window
(if vp0 is also in use) which brought the issue to light and ended in a
null-pointer dereference further down.
As we expect a primary-plane to exist for a video-port, add a check at
the end of the window-iteration and fail probing if none was found. |
| In the Linux kernel, the following vulnerability has been resolved:
xen: fix UAF in dmabuf_exp_from_pages()
[dma_buf_fd() fixes; no preferences regarding the tree it goes through -
up to xen folks]
As soon as we'd inserted a file reference into descriptor table, another
thread could close it. That's fine for the case when all we are doing is
returning that descriptor to userland (it's a race, but it's a userland
race and there's nothing the kernel can do about it). However, if we
follow fd_install() with any kind of access to objects that would be
destroyed on close (be it the struct file itself or anything destroyed
by its ->release()), we have a UAF.
dma_buf_fd() is a combination of reserving a descriptor and fd_install().
gntdev dmabuf_exp_from_pages() calls it and then proceeds to access the
objects destroyed on close - starting with gntdev_dmabuf itself.
Fix that by doing reserving descriptor before anything else and do
fd_install() only when everything had been set up. |
| In the Linux kernel, the following vulnerability has been resolved:
neighbour: Fix null-ptr-deref in neigh_flush_dev().
kernel test robot reported null-ptr-deref in neigh_flush_dev(). [0]
The cited commit introduced per-netdev neighbour list and converted
neigh_flush_dev() to use it instead of the global hash table.
One thing we missed is that neigh_table_clear() calls neigh_ifdown()
with NULL dev.
Let's restore the hash table iteration.
Note that IPv6 module is no longer unloadable, so neigh_table_clear()
is called only when IPv6 fails to initialise, which is unlikely to
happen.
[0]:
IPv6: Attempt to unregister permanent protocol 136
IPv6: Attempt to unregister permanent protocol 17
Oops: general protection fault, probably for non-canonical address 0xdffffc00000001a0: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000d00-0x0000000000000d07]
CPU: 1 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.12.0-rc6-01246-gf7f52738637f #1
Tainted: [T]=RANDSTRUCT
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:neigh_flush_dev.llvm.6395807810224103582+0x52/0x570
Code: c1 e8 03 42 8a 04 38 84 c0 0f 85 15 05 00 00 31 c0 41 83 3e 0a 0f 94 c0 48 8d 1c c3 48 81 c3 f8 0c 00 00 48 89 d8 48 c1 e8 03 <42> 80 3c 38 00 74 08 48 89 df e8 f7 49 93 fe 4c 8b 3b 4d 85 ff 0f
RSP: 0000:ffff88810026f408 EFLAGS: 00010206
RAX: 00000000000001a0 RBX: 0000000000000d00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffc0631640
RBP: ffff88810026f470 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffffffffc0625250 R14: ffffffffc0631640 R15: dffffc0000000000
FS: 00007f575cb83940(0000) GS:ffff8883aee00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f575db40008 CR3: 00000002bf936000 CR4: 00000000000406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__neigh_ifdown.llvm.6395807810224103582+0x44/0x390
neigh_table_clear+0xb1/0x268
ndisc_cleanup+0x21/0x38 [ipv6]
init_module+0x2f5/0x468 [ipv6]
do_one_initcall+0x1ba/0x628
do_init_module+0x21a/0x530
load_module+0x2550/0x2ea0
__se_sys_finit_module+0x3d2/0x620
__x64_sys_finit_module+0x76/0x88
x64_sys_call+0x7ff/0xde8
do_syscall_64+0xfb/0x1e8
entry_SYSCALL_64_after_hwframe+0x67/0x6f
RIP: 0033:0x7f575d6f2719
Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b7 06 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007fff82a2a268 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000557827b45310 RCX: 00007f575d6f2719
RDX: 0000000000000000 RSI: 00007f575d584efd RDI: 0000000000000004
RBP: 00007f575d584efd R08: 0000000000000000 R09: 0000557827b47b00
R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000020000
R13: 0000000000000000 R14: 0000557827b470e0 R15: 00007f575dbb4270
</TASK>
Modules linked in: ipv6(+) |
| In the Linux kernel, the following vulnerability has been resolved:
md: make rdev_addable usable for rcu mode
Our testcase trigger panic:
BUG: kernel NULL pointer dereference, address: 00000000000000e0
...
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 85 Comm: kworker/2:1 Not tainted 6.16.0+ #94
PREEMPT(none)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Workqueue: md_misc md_start_sync
RIP: 0010:rdev_addable+0x4d/0xf0
...
Call Trace:
<TASK>
md_start_sync+0x329/0x480
process_one_work+0x226/0x6d0
worker_thread+0x19e/0x340
kthread+0x10f/0x250
ret_from_fork+0x14d/0x180
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in: raid10
CR2: 00000000000000e0
---[ end trace 0000000000000000 ]---
RIP: 0010:rdev_addable+0x4d/0xf0
md_spares_need_change in md_start_sync will call rdev_addable which
protected by rcu_read_lock/rcu_read_unlock. This rcu context will help
protect rdev won't be released, but rdev->mddev will be set to NULL
before we call synchronize_rcu in md_kick_rdev_from_array. Fix this by
using READ_ONCE and check does rdev->mddev still alive. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: stop recv() if initial process_rx_list gave us non-DATA
If we have a non-DATA record on the rx_list and another record of the
same type still on the queue, we will end up merging them:
- process_rx_list copies the non-DATA record
- we start the loop and process the first available record since it's
of the same type
- we break out of the loop since the record was not DATA
Just check the record type and jump to the end in case process_rx_list
did some work. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: gpib: fix unset padding field copy back to userspace
The introduction of a padding field in the gpib_board_info_ioctl is
showing up as initialized data on the stack frame being copyied back
to userspace in function board_info_ioctl. The simplest fix is to
initialize the entire struct to zero to ensure all unassigned padding
fields are zero'd before being copied back to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Avoid accessing uninitialized arvif->ar during beacon miss
During beacon miss handling, ath12k driver iterates over active virtual
interfaces (vifs) and attempts to access the radio object (ar) via
arvif->deflink->ar.
However, after commit aa80f12f3bed ("wifi: ath12k: defer vdev creation for
MLO"), arvif is linked to a radio only after vdev creation, typically when
a channel is assigned or a scan is requested.
For P2P capable devices, a default P2P interface is created by
wpa_supplicant along with regular station interfaces, these serve as dummy
interfaces for P2P-capable stations, lack an associated netdev and initiate
frequent scans to discover neighbor p2p devices. When a scan is initiated
on such P2P vifs, driver selects destination radio (ar) based on scan
frequency, creates a scan vdev, and attaches arvif to the radio. Once the
scan completes or is aborted, the scan vdev is deleted, detaching arvif
from the radio and leaving arvif->ar uninitialized.
While handling beacon miss for station interfaces, P2P interface is also
encountered in the vif iteration and ath12k_mac_handle_beacon_miss_iter()
tries to dereference the uninitialized arvif->deflink->ar.
Fix this by verifying that vdev is created for the arvif before accessing
its ar during beacon miss handling and similar vif iterator callbacks.
==========================================================================
wlp6s0: detected beacon loss from AP (missed 7 beacons) - probing
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 5 UID: 0 PID: 0 Comm: swapper/5 Not tainted 6.16.0-rc1-wt-ath+ #2 PREEMPT(full)
RIP: 0010:ath12k_mac_handle_beacon_miss_iter+0xb5/0x1a0 [ath12k]
Call Trace:
__iterate_interfaces+0x11a/0x410 [mac80211]
ieee80211_iterate_active_interfaces_atomic+0x61/0x140 [mac80211]
ath12k_mac_handle_beacon_miss+0xa1/0xf0 [ath12k]
ath12k_roam_event+0x393/0x560 [ath12k]
ath12k_wmi_op_rx+0x1486/0x28c0 [ath12k]
ath12k_htc_process_trailer.isra.0+0x2fb/0x620 [ath12k]
ath12k_htc_rx_completion_handler+0x448/0x830 [ath12k]
ath12k_ce_recv_process_cb+0x549/0x9e0 [ath12k]
ath12k_ce_per_engine_service+0xbe/0xf0 [ath12k]
ath12k_pci_ce_workqueue+0x69/0x120 [ath12k]
process_one_work+0xe3a/0x1430
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
