| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: disable napi on driver removal
A warning on driver removal started occurring after commit 9dd05df8403b
("net: warn if NAPI instance wasn't shut down"). Disable tx napi before
deleting it in mt76_dma_cleanup().
WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100
CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy)
Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024
RIP: 0010:__netif_napi_del_locked+0xf0/0x100
Call Trace:
<TASK>
mt76_dma_cleanup+0x54/0x2f0 [mt76]
mt7921_pci_remove+0xd5/0x190 [mt7921e]
pci_device_remove+0x47/0xc0
device_release_driver_internal+0x19e/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x2e/0xb0
__do_sys_delete_module.isra.0+0x197/0x2e0
do_syscall_64+0x7b/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Tested with mt7921e but the same pattern can be actually applied to other
mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled
in their *_dma_init() functions and only toggled off and on again inside
their suspend/resume/reset paths. So it should be okay to disable tx
napi in such a generic way.
Found by Linux Verification Center (linuxtesting.org). |
| Command injection vulnerability in Aqara Hub devices including Camera Hub G3 4.1.9_0027, Hub M2 4.3.6_0027, and Hub M3 4.3.6_0025 allows attackers to execute arbitrary commands with root privileges through malicious domain names. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix memory leak in error handling path of idxd_alloc
Memory allocated for idxd is not freed if an error occurs during
idxd_alloc(). To fix it, free the allocated memory in the reverse order
of allocation before exiting the function in case of an error. |
| Command injection vulnerabilities in Aqara Camera Hub G3 4.1.9_0027 allow attackers to execute arbitrary commands with root privileges through malicious QR codes during device setup and factory reset. |
| Aqara Hub devices including Camera Hub G3 4.1.9_0027, Hub M2 4.3.6_0027, and Hub M3 4.3.6_0025 contain an undocumented remote access mechanism enabling unrestricted remote command execution. |
| Multiple vulnerabilities in Aqara Hub firmware update process in the Camera Hub G3 4.1.9_0027, Hub M2 4.3.6_0027, and Hub M3 4.3.6_0025 devices, allow attackers to install malicious firmware without proper verification. The device fails to validate firmware signatures during updates, uses outdated cryptographic methods that can be exploited to forge valid signatures, and exposes information through improperly initialized memory. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Disable MACsec offload for uplink representor profile
MACsec offload is not supported in switchdev mode for uplink
representors. When switching to the uplink representor profile, the
MACsec offload feature must be cleared from the netdevice's features.
If left enabled, attempts to add offloads result in a null pointer
dereference, as the uplink representor does not support MACsec offload
even though the feature bit remains set.
Clear NETIF_F_HW_MACSEC in mlx5e_fix_uplink_rep_features().
Kernel log:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 29 UID: 0 PID: 4714 Comm: ip Not tainted 6.14.0-rc4_for_upstream_debug_2025_03_02_17_35 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__mutex_lock+0x128/0x1dd0
Code: d0 7c 08 84 d2 0f 85 ad 15 00 00 8b 35 91 5c fe 03 85 f6 75 29 49 8d 7e 60 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a6 15 00 00 4d 3b 76 60 0f 85 fd 0b 00 00 65 ff
RSP: 0018:ffff888147a4f160 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 000000000000000f RSI: 0000000000000000 RDI: 0000000000000078
RBP: ffff888147a4f2e0 R08: ffffffffa05d2c19 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: 0000000000000018 R15: ffff888152de0000
FS: 00007f855e27d800(0000) GS:ffff88881ee80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004e5768 CR3: 000000013ae7c005 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
Call Trace:
<TASK>
? die_addr+0x3d/0xa0
? exc_general_protection+0x144/0x220
? asm_exc_general_protection+0x22/0x30
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? __mutex_lock+0x128/0x1dd0
? lockdep_set_lock_cmp_fn+0x190/0x190
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? mutex_lock_io_nested+0x1ae0/0x1ae0
? lock_acquire+0x1c2/0x530
? macsec_upd_offload+0x145/0x380
? lockdep_hardirqs_on_prepare+0x400/0x400
? kasan_save_stack+0x30/0x40
? kasan_save_stack+0x20/0x40
? kasan_save_track+0x10/0x30
? __kasan_kmalloc+0x77/0x90
? __kmalloc_noprof+0x249/0x6b0
? genl_family_rcv_msg_attrs_parse.constprop.0+0xb5/0x240
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? mlx5e_macsec_add_rxsa+0x11a0/0x11a0 [mlx5_core]
macsec_update_offload+0x26c/0x820
? macsec_set_mac_address+0x4b0/0x4b0
? lockdep_hardirqs_on_prepare+0x284/0x400
? _raw_spin_unlock_irqrestore+0x47/0x50
macsec_upd_offload+0x2c8/0x380
? macsec_update_offload+0x820/0x820
? __nla_parse+0x22/0x30
? genl_family_rcv_msg_attrs_parse.constprop.0+0x15e/0x240
genl_family_rcv_msg_doit+0x1cc/0x2a0
? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
? cap_capable+0xd4/0x330
genl_rcv_msg+0x3ea/0x670
? genl_family_rcv_msg_dumpit+0x2a0/0x2a0
? lockdep_set_lock_cmp_fn+0x190/0x190
? macsec_update_offload+0x820/0x820
netlink_rcv_skb+0x12b/0x390
? genl_family_rcv_msg_dumpit+0x2a0/0x2a0
? netlink_ack+0xd80/0xd80
? rwsem_down_read_slowpath+0xf90/0xf90
? netlink_deliver_tap+0xcd/0xac0
? netlink_deliver_tap+0x155/0xac0
? _copy_from_iter+0x1bb/0x12c0
genl_rcv+0x24/0x40
netlink_unicast+0x440/0x700
? netlink_attachskb+0x760/0x760
? lock_acquire+0x1c2/0x530
? __might_fault+0xbb/0x170
netlink_sendmsg+0x749/0xc10
? netlink_unicast+0x700/0x700
? __might_fault+0xbb/0x170
? netlink_unicast+0x700/0x700
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x53f/0x760
? import_iovec+0x7/0x10
? kernel_sendmsg+0x30/0x30
? __copy_msghdr+0x3c0/0x3c0
? filter_irq_stacks+0x90/0x90
? stack_depot_save_flags+0x28/0xa30
___sys_sen
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: handle failure of nfs_get_lock_context in unlock path
When memory is insufficient, the allocation of nfs_lock_context in
nfs_get_lock_context() fails and returns -ENOMEM. If we mistakenly treat
an nfs4_unlockdata structure (whose l_ctx member has been set to -ENOMEM)
as valid and proceed to execute rpc_run_task(), this will trigger a NULL
pointer dereference in nfs4_locku_prepare. For example:
BUG: kernel NULL pointer dereference, address: 000000000000000c
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 15 UID: 0 PID: 12 Comm: kworker/u64:0 Not tainted 6.15.0-rc2-dirty #60
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40
Workqueue: rpciod rpc_async_schedule
RIP: 0010:nfs4_locku_prepare+0x35/0xc2
Code: 89 f2 48 89 fd 48 c7 c7 68 69 ef b5 53 48 8b 8e 90 00 00 00 48 89 f3
RSP: 0018:ffffbbafc006bdb8 EFLAGS: 00010246
RAX: 000000000000004b RBX: ffff9b964fc1fa00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: fffffffffffffff4 RDI: ffff9ba53fddbf40
RBP: ffff9ba539934000 R08: 0000000000000000 R09: ffffbbafc006bc38
R10: ffffffffb6b689c8 R11: 0000000000000003 R12: ffff9ba539934030
R13: 0000000000000001 R14: 0000000004248060 R15: ffffffffb56d1c30
FS: 0000000000000000(0000) GS:ffff9ba5881f0000(0000) knlGS:00000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000000c CR3: 000000093f244000 CR4: 00000000000006f0
Call Trace:
<TASK>
__rpc_execute+0xbc/0x480
rpc_async_schedule+0x2f/0x40
process_one_work+0x232/0x5d0
worker_thread+0x1da/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0x10d/0x240
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
CR2: 000000000000000c
---[ end trace 0000000000000000 ]---
Free the allocated nfs4_unlockdata when nfs_get_lock_context() fails and
return NULL to terminate subsequent rpc_run_task, preventing NULL pointer
dereference. |
| NULL-pointer dereference vulnerabilities in Aqara Hub M2 4.3.6_0027, Hub M3 4.3.6_0025, and Camera Hub G3 4.1.9_0027 in the JSON processing enable denial-of-service attacks through malformed JSON inputs. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq27xxx-i2c: Do not free non existing IRQ
The bq27xxx i2c-client may not have an IRQ, in which case
client->irq will be 0. bq27xxx_battery_i2c_probe() already has
an if (client->irq) check wrapping the request_threaded_irq().
But bq27xxx_battery_i2c_remove() unconditionally calls
free_irq(client->irq) leading to:
[ 190.310742] ------------[ cut here ]------------
[ 190.310843] Trying to free already-free IRQ 0
[ 190.310861] WARNING: CPU: 2 PID: 1304 at kernel/irq/manage.c:1893 free_irq+0x1b8/0x310
Followed by a backtrace when unbinding the driver. Add
an if (client->irq) to bq27xxx_battery_i2c_remove() mirroring
probe() to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
efi/capsule-loader: fix incorrect allocation size
gcc-14 notices that the allocation with sizeof(void) on 32-bit architectures
is not enough for a 64-bit phys_addr_t:
drivers/firmware/efi/capsule-loader.c: In function 'efi_capsule_open':
drivers/firmware/efi/capsule-loader.c:295:24: error: allocation of insufficient size '4' for type 'phys_addr_t' {aka 'long long unsigned int'} with size '8' [-Werror=alloc-size]
295 | cap_info->phys = kzalloc(sizeof(void *), GFP_KERNEL);
| ^
Use the correct type instead here. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: fsl: qbman: Use raw spinlock for cgr_lock
smp_call_function always runs its callback in hard IRQ context, even on
PREEMPT_RT, where spinlocks can sleep. So we need to use a raw spinlock
for cgr_lock to ensure we aren't waiting on a sleeping task.
Although this bug has existed for a while, it was not apparent until
commit ef2a8d5478b9 ("net: dpaa: Adjust queue depth on rate change")
which invokes smp_call_function_single via qman_update_cgr_safe every
time a link goes up or down. |
| Eibiz i-Media Server Digital Signage 3.8.0 contains a directory traversal vulnerability that allows unauthenticated remote attackers to access files outside the server's root directory. Attackers can exploit the 'oldfile' GET parameter to view sensitive configuration files like web.xml and system files such as win.ini. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: clear BM pool before initialization
Register value persist after booting the kernel using
kexec which results in kernel panic. Thus clear the
BM pool registers before initialisation to fix the issue. |
| EIBIZ i-Media Server Digital Signage 3.8.0 contains an unauthenticated configuration disclosure vulnerability that allows remote attackers to access sensitive configuration files via direct object reference. Attackers can retrieve the SiteConfig.properties file through an HTTP GET request, exposing administrative credentials, database connection details, and system configuration information. |
| QiHang Media Web Digital Signage 3.0.9 contains a cleartext credentials vulnerability that allows unauthenticated attackers to access administrative login information through an unprotected XML file. Attackers can retrieve hardcoded admin credentials by requesting the '/xml/User/User.xml' file, enabling direct authentication bypass. |
| TOTOLINK A3300R V17.0.0cu.557_B20221024 and N200RE V9.3.5u.6448_B20240521 and V9.3.5u.6437_B20230519 are vulnerable to Incorrect Access Control. Attackers can send payloads to the interface without logging in (remote). |
| TOTOLINK N200RE V9.3.5u.6437_B20230519 is vulnerable to command Injection in setOpModeCfg via hostName. |
| TOTOLINK A3300R V17.0.0cu.596_B20250515 is vulnerable to command injection in the function NTPSyncWithHost via the host_time parameter. |
| QiHang Media Web Digital Signage 3.0.9 contains an unauthenticated remote code execution vulnerability in the QH.aspx file that allows attackers to upload malicious ASPX scripts. Attackers can exploit the file upload functionality by using the 'remotePath' and 'fileToUpload' parameters to write and execute arbitrary system commands on the server. |
