| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc()
The voice allocator sometimes begins allocating from near the end of the
array and then wraps around, however snd_emu10k1_pcm_channel_alloc()
accesses the newly allocated voices as if it never wrapped around.
This results in out of bounds access if the first voice has a high enough
index so that first_voice + requested_voice_count > NUM_G (64).
The more voices are requested, the more likely it is for this to occur.
This was initially discovered using PipeWire, however it can be reproduced
by calling aplay multiple times with 16 channels:
aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero
UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40
index 65 is out of range for type 'snd_emu10k1_voice [64]'
CPU: 1 PID: 31977 Comm: aplay Tainted: G W IOE 6.0.0-rc2-emu10k1+ #7
Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x3f
__ubsan_handle_out_of_bounds.cold+0x44/0x49
snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1]
snd_pcm_hw_params+0x29f/0x600 [snd_pcm]
snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm]
? exit_to_user_mode_prepare+0x35/0x170
? do_syscall_64+0x69/0x90
? syscall_exit_to_user_mode+0x26/0x50
? do_syscall_64+0x69/0x90
? exit_to_user_mode_prepare+0x35/0x170
snd_pcm_ioctl+0x27/0x40 [snd_pcm]
__x64_sys_ioctl+0x95/0xd0
do_syscall_64+0x5c/0x90
? do_syscall_64+0x69/0x90
? do_syscall_64+0x69/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()
There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and
the number of it's interfaces less than 4, an out-of-bounds read bug occurs
when parsing the interface descriptor for this device.
Fix this by checking the number of interfaces. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bug in extents parsing when eh_entries == 0 and eh_depth > 0
When walking through an inode extents, the ext4_ext_binsearch_idx() function
assumes that the extent header has been previously validated. However, there
are no checks that verify that the number of entries (eh->eh_entries) is
non-zero when depth is > 0. And this will lead to problems because the
EXT_FIRST_INDEX() and EXT_LAST_INDEX() will return garbage and result in this:
[ 135.245946] ------------[ cut here ]------------
[ 135.247579] kernel BUG at fs/ext4/extents.c:2258!
[ 135.249045] invalid opcode: 0000 [#1] PREEMPT SMP
[ 135.250320] CPU: 2 PID: 238 Comm: tmp118 Not tainted 5.19.0-rc8+ #4
[ 135.252067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 135.255065] RIP: 0010:ext4_ext_map_blocks+0xc20/0xcb0
[ 135.256475] Code:
[ 135.261433] RSP: 0018:ffffc900005939f8 EFLAGS: 00010246
[ 135.262847] RAX: 0000000000000024 RBX: ffffc90000593b70 RCX: 0000000000000023
[ 135.264765] RDX: ffff8880038e5f10 RSI: 0000000000000003 RDI: ffff8880046e922c
[ 135.266670] RBP: ffff8880046e9348 R08: 0000000000000001 R09: ffff888002ca580c
[ 135.268576] R10: 0000000000002602 R11: 0000000000000000 R12: 0000000000000024
[ 135.270477] R13: 0000000000000000 R14: 0000000000000024 R15: 0000000000000000
[ 135.272394] FS: 00007fdabdc56740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
[ 135.274510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 135.276075] CR2: 00007ffc26bd4f00 CR3: 0000000006261004 CR4: 0000000000170ea0
[ 135.277952] Call Trace:
[ 135.278635] <TASK>
[ 135.279247] ? preempt_count_add+0x6d/0xa0
[ 135.280358] ? percpu_counter_add_batch+0x55/0xb0
[ 135.281612] ? _raw_read_unlock+0x18/0x30
[ 135.282704] ext4_map_blocks+0x294/0x5a0
[ 135.283745] ? xa_load+0x6f/0xa0
[ 135.284562] ext4_mpage_readpages+0x3d6/0x770
[ 135.285646] read_pages+0x67/0x1d0
[ 135.286492] ? folio_add_lru+0x51/0x80
[ 135.287441] page_cache_ra_unbounded+0x124/0x170
[ 135.288510] filemap_get_pages+0x23d/0x5a0
[ 135.289457] ? path_openat+0xa72/0xdd0
[ 135.290332] filemap_read+0xbf/0x300
[ 135.291158] ? _raw_spin_lock_irqsave+0x17/0x40
[ 135.292192] new_sync_read+0x103/0x170
[ 135.293014] vfs_read+0x15d/0x180
[ 135.293745] ksys_read+0xa1/0xe0
[ 135.294461] do_syscall_64+0x3c/0x80
[ 135.295284] entry_SYSCALL_64_after_hwframe+0x46/0xb0
This patch simply adds an extra check in __ext4_ext_check(), verifying that
eh_entries is not 0 when eh_depth is > 0. |
| In the Linux kernel, the following vulnerability has been resolved:
moxart: fix potential use-after-free on remove path
It was reported that the mmc host structure could be accessed after it
was freed in moxart_remove(), so fix this by saving the base register of
the device and using it instead of the pointer dereference. |
| SoftSea EPUB File Reader 1.0.0.0 is vulnerable to Directory Traversal. The vulnerability resides in the EPUB file processing component, specifically in the functionality responsible for extracting and handling EPUB archive contents. |
| A use-after-free in the MPEG1or2Demux::newElementaryStream() function of Live555 Streaming Media v2018.09.02 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MPEG Program stream. |
| A Stored Cross-Site Scripting (XSS) vulnerability in Calibre-Web v0.6.25 allows attackers to inject malicious JavaScript into the 'username' field during user creation. The payload is stored unsanitized and later executed when the /ajax/listusers endpoint is accessed. |
| Out of bounds write in V8 in Google Chrome prior to 124.0.6367.207 allowed a remote attacker to perform an out of bounds memory write via a crafted HTML page. (Chromium security severity: High) |
| Not used |
| Not used |
| Not used |
| Not used |
| Not used |
| Not used |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: prevent kernel bug at submit_bh_wbc()
Fix a bug where nilfs_get_block() returns a successful status when
searching and inserting the specified block both fail inconsistently. If
this inconsistent behavior is not due to a previously fixed bug, then an
unexpected race is occurring, so return a temporary error -EAGAIN instead.
This prevents callers such as __block_write_begin_int() from requesting a
read into a buffer that is not mapped, which would cause the BUG_ON check
for the BH_Mapped flag in submit_bh_wbc() to fail. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
Patch series "nilfs2: fix kernel bug at submit_bh_wbc()".
This resolves a kernel BUG reported by syzbot. Since there are two
flaws involved, I've made each one a separate patch.
The first patch alone resolves the syzbot-reported bug, but I think
both fixes should be sent to stable, so I've tagged them as such.
This patch (of 2):
Syzbot has reported a kernel bug in submit_bh_wbc() when writing file data
to a nilfs2 file system whose metadata is corrupted.
There are two flaws involved in this issue.
The first flaw is that when nilfs_get_block() locates a data block using
btree or direct mapping, if the disk address translation routine
nilfs_dat_translate() fails with internal code -ENOENT due to DAT metadata
corruption, it can be passed back to nilfs_get_block(). This causes
nilfs_get_block() to misidentify an existing block as non-existent,
causing both data block lookup and insertion to fail inconsistently.
The second flaw is that nilfs_get_block() returns a successful status in
this inconsistent state. This causes the caller __block_write_begin_int()
or others to request a read even though the buffer is not mapped,
resulting in a BUG_ON check for the BH_Mapped flag in submit_bh_wbc()
failing.
This fixes the first issue by changing the return value to code -EINVAL
when a conversion using DAT fails with code -ENOENT, avoiding the
conflicting condition that leads to the kernel bug described above. Here,
code -EINVAL indicates that metadata corruption was detected during the
block lookup, which will be properly handled as a file system error and
converted to -EIO when passing through the nilfs2 bmap layer. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: host: Fix dereference issue in DDMA completion flow.
Fixed variable dereference issue in DDMA completion flow. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: mxs-auart: add spinlock around changing cts state
The uart_handle_cts_change() function in serial_core expects the caller
to hold uport->lock. For example, I have seen the below kernel splat,
when the Bluetooth driver is loaded on an i.MX28 board.
[ 85.119255] ------------[ cut here ]------------
[ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec
[ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs
[ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1
[ 85.151396] Hardware name: Freescale MXS (Device Tree)
[ 85.156679] Workqueue: hci0 hci_power_on [bluetooth]
(...)
[ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4
[ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210
(...) |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: vmk80xx: fix incomplete endpoint checking
While vmk80xx does have endpoint checking implemented, some things
can fall through the cracks. Depending on the hardware model,
URBs can have either bulk or interrupt type, and current version
of vmk80xx_find_usb_endpoints() function does not take that fully
into account. While this warning does not seem to be too harmful,
at the very least it will crash systems with 'panic_on_warn' set on
them.
Fix the issue found by Syzkaller [1] by somewhat simplifying the
endpoint checking process with usb_find_common_endpoints() and
ensuring that only expected endpoint types are present.
This patch has not been tested on real hardware.
[1] Syzkaller report:
usb 1-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 0 PID: 781 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503
...
Call Trace:
<TASK>
usb_start_wait_urb+0x113/0x520 drivers/usb/core/message.c:59
vmk80xx_reset_device drivers/comedi/drivers/vmk80xx.c:227 [inline]
vmk80xx_auto_attach+0xa1c/0x1a40 drivers/comedi/drivers/vmk80xx.c:818
comedi_auto_config+0x238/0x380 drivers/comedi/drivers.c:1067
usb_probe_interface+0x5cd/0xb00 drivers/usb/core/driver.c:399
...
Similar issue also found by Syzkaller: |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-frontends: avoid stack overflow warnings with clang
A previous patch worked around a KASAN issue in stv0367, now a similar
problem showed up with clang:
drivers/media/dvb-frontends/stv0367.c:1222:12: error: stack frame size (3624) exceeds limit (2048) in 'stv0367ter_set_frontend' [-Werror,-Wframe-larger-than]
1214 | static int stv0367ter_set_frontend(struct dvb_frontend *fe)
Rework the stv0367_writereg() function to be simpler and mark both
register access functions as noinline_for_stack so the temporary
i2c_msg structures do not get duplicated on the stack when KASAN_STACK
is enabled. |
