| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| changedetection.io is a free open source web page change detection, website watcher, restock monitor and notification service. In affected versions Input in parameter notification_urls is not processed resulting in javascript execution in the application. A reflected XSS vulnerability happens when the user input from a URL or POST data is reflected on the page without being stored, thus allowing the attacker to inject malicious content. This issue has been addressed in version 0.45.22. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| sagemaker-python-sdk is a library for training and deploying machine learning models on Amazon SageMaker. The sagemaker.base_deserializers.NumpyDeserializer module before v2.218.0 allows potentially unsafe deserialization when untrusted data is passed as pickled object arrays. This consequently may allow an unprivileged third party to cause remote code execution, denial of service, affecting both confidentiality and integrity. Users are advised to upgrade to version 2.218.0. Users unable to upgrade should not pass pickled numpy object arrays which originated from an untrusted source, or that could have been tampered with. Only pass pickled numpy object arrays from trusted sources. |
| sagemaker-python-sdk is a library for training and deploying machine learning models on Amazon SageMaker. In affected versions the capture_dependencies function in `sagemaker.serve.save_retrive.version_1_0_0.save.utils` module allows for potentially unsafe Operating System (OS) Command Injection if inappropriate command is passed as the “requirements_path” parameter. This consequently may allow an unprivileged third party to cause remote code execution, denial of service, affecting both confidentiality and integrity. This issue has been addressed in version 2.214.3. Users are advised to upgrade. Users unable to upgrade should not override the “requirements_path” parameter of capture_dependencies function in `sagemaker.serve.save_retrive.version_1_0_0.save.utils`, and instead use the default value. |
| aiosmptd is a reimplementation of the Python stdlib smtpd.py based on asyncio. Prior to version 1.4.6, servers based on aiosmtpd accept extra unencrypted commands after STARTTLS, treating them as if they came from inside the encrypted connection. This could be exploited by a man-in-the-middle attack. Version 1.4.6 contains a patch for the issue. |
| Wagtail is an open source content management system built on Django. Due to an improperly applied permission check in the `wagtail.contrib.settings` module, a user with access to the Wagtail admin and knowledge of the URL of the edit view for a settings model can access and update that setting, even when they have not been granted permission over the model. The vulnerability is not exploitable by an ordinary site visitor without access to the Wagtail admin. Patched versions have been released as Wagtail 6.0.5 and 6.1.2. Wagtail releases prior to 6.0 are unaffected. Users are advised to upgrade. Site owners who are unable to upgrade to a patched version can avoid the vulnerability in `ModelViewSet` by registering the model as a snippet instead. No workaround is available for `wagtail.contrib.settings`. |
| The O-RAN E2T I-Release buildPrometheusList function can have a NULL pointer dereference because peerInfo can be NULL. |
| Multiple methods in the salt master skip minion token validation. Therefore a misbehaving minion can impersonate another minion. |
| A code injection vulnerability exists in the huggingface/text-generation-inference repository, specifically within the `autodocs.yml` workflow file. The vulnerability arises from the insecure handling of the `github.head_ref` user input, which is used to dynamically construct a command for installing a software package. An attacker can exploit this by forking the repository, creating a branch with a malicious payload as the name, and then opening a pull request to the base repository. Successful exploitation could lead to arbitrary code execution within the context of the GitHub Actions runner. This issue affects versions up to and including v2.0.0 and was fixed in version 2.0.0. |
| Red is a fully modular Discord bot. Due to a bug in Red's Core API, 3rd-party cogs using the `@commands.can_manage_channel()` command permission check without additional permission controls may authorize a user to run a command even when that user doesn't have permissions to manage a channel. None of the core commands or core cogs are affected. The maintainers of the project are not aware of any _public_ 3rd-party cog utilizing this API at the time of writing this advisory. The problem was patched and released in version 3.5.10. |
| A vulnerability in the parisneo/lollms, specifically in the `/unInstall_binding` endpoint, allows for arbitrary code execution due to insufficient sanitization of user input. The issue arises from the lack of path sanitization when handling the `name` parameter in the `unInstall_binding` function, allowing an attacker to traverse directories and execute arbitrary code by loading a malicious `__init__.py` file. This vulnerability affects the latest version of the software. The exploitation of this vulnerability could lead to remote code execution on the system where parisneo/lollms is deployed. |
| A remote code execution (RCE) vulnerability exists in the berriai/litellm project due to improper control of the generation of code when using the `eval` function unsafely in the `litellm.get_secret()` method. Specifically, when the server utilizes Google KMS, untrusted data is passed to the `eval` function without any sanitization. Attackers can exploit this vulnerability by injecting malicious values into environment variables through the `/config/update` endpoint, which allows for the update of settings in `proxy_server_config.yaml`. |
| unstructured v.0.14.2 and before is vulnerable to XML External Entity (XXE) via the XMLParser. |
| changedetection.io is a free open source web page change detection tool. The validation for the file URI scheme falls short, and results in an attacker being able to read any file on the system. This issue only affects instances with a webdriver enabled, and `ALLOW_FILE_URI` false or not defined. The check used for URL protocol, `is_safe_url`, allows `file:` as a URL scheme. It later checks if local files are permitted, but one of the preconditions for the check is that the URL starts with `file://`. The issue comes with the fact that the file URI scheme is not required to have double slashes. This issue has been addressed in version 0.47.06 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Incorrect permission assignment for critical resource for some System Firmware Update Utility (SysFwUpdt) for Intel(R) Server Boards and Intel(R) Server Systems Based before version 16.0.12. within Ring 3: User Applications may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires passive user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Incorrect default permissions for some Intel(R) Memory and Storage Tool before version 2.5.2 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with an authenticated user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires active user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| zhmcclient is a pure Python client library for the IBM Z HMC Web Services API. In affected versions the Python package "zhmcclient" writes password-like properties in clear text into its HMC and API logs in the following cases: 1. The 'boot-ftp-password' and 'ssc-master-pw' properties when creating or updating a partition in DPM mode, in the zhmcclient API and HMC logs. 2. The 'ssc-master-pw' and 'zaware-master-pw' properties when updating an LPAR in classic mode, in the zhmcclient API and HMC logs. 3. The 'ssc-master-pw' and 'zaware-master-pw' properties when creating or updating an image activation profile in classic mode, in the zhmcclient API and HMC logs. 4. The 'password' property when creating or updating an HMC user, in the zhmcclient API log. 5. The 'bind-password' property when creating or updating an LDAP server definition, in the zhmcclient API and HMC logs. This issue affects only users of the zhmcclient package that have enabled the Python loggers named "zhmcclient.api" (for the API log) or "zhmcclient.hmc" (for the HMC log) and that use the functions listed above. This issue has been fixed in zhmcclient version 1.18.1. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| In OpenStack Neutron before 25.0.1, neutron/extensions/tagging.py can use an incorrect ID during policy enforcement. It does not apply the proper policy check for changing network tags. An unprivileged tenant is able to change (add and clear) tags on network objects that do not belong to the tenant, and this action is not subjected to the proper policy authorization check. This affects 23 before 23.2.1, 24 before 24.0.2, and 25 before 25.0.1. |
| A Stored Cross-Site Scripting (XSS) vulnerability was identified affecting Skybox Change Manager versions 13.2.170 and earlier that allows remote authenticated users to store malicious payloads in the affected field that would then execute in an unsuspecting victim's browser. |
| sigstore-python is a Python tool for generating and verifying Sigstore signatures. Versions of sigstore-python newer than 2.0.0 but prior to 3.6.0 perform insufficient validation of the "integration time" present in "v2" and "v3" bundles during the verification flow: the "integration time" is verified *if* a source of signed time (such as an inclusion promise) is present, but is otherwise trusted if no source of signed time is present. This does not affect "v1" bundles, as the "v1" bundle format always requires an inclusion promise.
Sigstore uses signed time to support verification of signatures made against short-lived signing keys. The impact and severity of this weakness is *low*, as Sigstore contains multiple other enforcing components that prevent an attacker who modifies the integration timestamp within a bundle from impersonating a valid signature. In particular, an attacker who modifies the integration timestamp can induce a Denial of Service, but in no different manner than already possible with bundle access (e.g. modifying the signature itself such that it fails to verify). Separately, an attacker could upload a *new* entry to the transparency service, and substitute their new entry's time. However, this would still be rejected at validation time, as the new entry's (valid) signed time would be outside the validity window of the original signing certificate and would nonetheless render the attacker auditable. |
| A prototype pollution in the lib.setValue function of @syncfusion/ej2-spreadsheet v27.2.2 allows attackers to cause a Denial of Service (DoS) via supplying a crafted payload. NOTE: the Supplier disputes this because they found that the lib.setValue function is not utilized. |
