| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Input Validation in certain UniFi Access devices could allow a Command Injection by a malicious actor with access to UniFi Access management network.
Affected Products:
UniFi Access Reader Pro (Version 2.14.21 and earlier)
UniFi Access G2 Reader Pro (Version 1.10.32 and earlier)
UniFi Access G3 Reader Pro (Version 1.10.30 and earlier)
UniFi Access Intercom (Version 1.7.28 and earlier)
UniFi Access G3 Intercom (Version 1.7.29 and earlier)
UniFi Access Intercom Viewer (Version 1.3.20 and earlier)
Mitigation:
Update UniFi Access Reader Pro Version 2.15.9 or later
Update UniFi Access G2 Reader Pro Version 1.11.23 or later
Update UniFi Access G3 Reader Pro Version 1.11.22 or later
Update UniFi Access Intercom Version 1.8.22 or later
Update UniFi Access G3 Intercom Version 1.8.22 or later
Update UniFi Access Intercom Viewer Version 1.4.39 or later |
| NVIDIA Installer for Windows contains a vulnerability where an attacker may be able to escalate privileges. A successful exploit of this vulnerability may lead to escalation of privileges, denial of service, code execution, information disclosure and data tampering. |
| An authenticated user with low privileges can exploit a missing authorization check in an IBS module of FS-RBD, allowing unauthorized access to perform actions beyond their intended permissions. This causes a low impact on integrity with no impact on confidentiality and availability. |
| Many fields for the web configuration interface of the firmware for Mennekes Smart / Premium Chargingpoints can be abused to execute arbitrary SQL commands because the values are insufficiently neutralized. |
| A vulnerability classified as critical was found in Doufox up to 0.2.0. Affected by this vulnerability is an unknown functionality of the file /?s=doudou&c=file&a=list. The manipulation of the argument dir leads to path traversal. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Credential disclosure vulnerability via the /staff route in GreaterWMS <= 2.1.49 allows a remote unauthenticated attackers to bypass authentication and escalate privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: devices: fix missing put_device in mport_cdev_open
When kfifo_alloc fails, the refcount of chdev->dev is left incremental.
We should use put_device(&chdev->dev) to decrease the ref count of
chdev->dev to avoid refcount leak. |
| The Wish To Go plugin for WordPress is vulnerable to Stored Cross-Site Scripting via shortcode attributes in all versions up to, and including, 0.5.2 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A weakness has been identified in codingWithElias School Management System up to f1ac334bfd89ae9067cc14dea12ec6ff3f078c01. Affected is an unknown function of the file /student-view.php of the component Edit Student Info Page. This manipulation of the argument First Name causes cross site scripting. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. Other parameters might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in winston-dsouza Ecommerce-Website up to 87734c043269baac0b4cfe9664784462138b1b2e. Affected by this issue is some unknown functionality of the file /includes/header_menu.php of the component GET Parameter Handler. Executing manipulation of the argument Error can lead to cross site scripting. The attack can be executed remotely. The exploit has been made available to the public and could be exploited. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability, which was classified as problematic, has been found in Claro A7600-A1 RNR4-A72T-2x16_v2110403_CLA_32_160817. Affected by this issue is some unknown functionality of the file /form2pingv6.cgi of the component Ping6 Diagnóstico. The manipulation of the argument ip6addr with the input <img/src/onerror=prompt(8)> leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Vodafone H500s devices running firmware v3.5.10 (hardware model Sercomm VFH500) expose the WiFi access point password via an unauthenticated HTTP endpoint. By sending a crafted GET request to /data/activation.json with specific headers and cookies, a remote attacker can retrieve a JSON document that contains the wifi_password field. This allows an unauthenticated attacker to obtain the WiFi credentials and gain unauthorized access to the wireless network, compromising confidentiality of network traffic and attached systems. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix resource leak in ksmbd_session_rpc_open()
When ksmbd_rpc_open() fails then it must call ksmbd_rpc_id_free() to
undo the result of ksmbd_ipc_id_alloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix out of bounds memory read error in symlink repair
xfs/286 produced this report on my test fleet:
==================================================================
BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110
Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184):
memcpy_orig+0x54/0x110
xrep_symlink_salvage_inline+0xb3/0xf0 [xfs]
xrep_symlink_salvage+0x100/0x110 [xfs]
xrep_symlink+0x2e/0x80 [xfs]
xrep_attempt+0x61/0x1f0 [xfs]
xfs_scrub_metadata+0x34f/0x5c0 [xfs]
xfs_ioc_scrubv_metadata+0x387/0x560 [xfs]
xfs_file_ioctl+0xe23/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128
allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago):
xfs_init_local_fork+0x79/0xe0 [xfs]
xfs_iformat_local+0xa4/0x170 [xfs]
xfs_iformat_data_fork+0x148/0x180 [xfs]
xfs_inode_from_disk+0x2cd/0x480 [xfs]
xfs_iget+0x450/0xd60 [xfs]
xfs_bulkstat_one_int+0x6b/0x510 [xfs]
xfs_bulkstat_iwalk+0x1e/0x30 [xfs]
xfs_iwalk_ag_recs+0xdf/0x150 [xfs]
xfs_iwalk_run_callbacks+0xb9/0x190 [xfs]
xfs_iwalk_ag+0x1dc/0x2f0 [xfs]
xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs]
xfs_iwalk+0xa4/0xd0 [xfs]
xfs_bulkstat+0xfa/0x170 [xfs]
xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs]
xfs_file_ioctl+0xbf2/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014
==================================================================
On further analysis, I realized that the second parameter to min() is
not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data
buffer. if_bytes can be smaller than the data fork size because:
(a) the forkoff code tries to keep the data area as large as possible
(b) for symbolic links, if_bytes is the ondisk file size + 1
(c) forkoff is always a multiple of 8.
Case in point: for a single-byte symlink target, forkoff will be
8 but the buffer will only be 2 bytes long.
In other words, the logic here is wrong and we walk off the end of the
incore buffer. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: zero unused hash fields
When GSO tunnel is negotiated virtio_net_hdr_tnl_from_skb() tries to
initialize the tunnel metadata but forget to zero unused rxhash
fields. This may leak information to another side. Fixing this by
zeroing the unused hash fields. |
| The Post Slides WordPress plugin through 1.0.1 does not validate some shortcode attributes before using them to generate paths passed to include function/s, allowing any authenticated users such as with contributor or higher roles to perform LFI attacks |
| Pix-Link LV-WR21Q does not enforce any form of authentication for endpoint /goform/getHomePageInfo. Remote unauthenticated attacker is able to use this endpoint to e.g: retrieve cleartext password to the access point.
The vendor was notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Only version V108_108 was tested and confirmed as vulnerable, other versions were not tested and might also be vulnerable. |
| The Freemius SDK, as used by hundreds of WordPress plugin and theme developers, was vulnerable to Cross-Site Request Forgery and Information disclosure due to missing capability checks and nonce protection on the _get_debug_log, _get_db_option, and the _set_db_option functions in versions up to, and including 2.4.2. Any WordPress plugin or theme running a version of Freemius less than 2.4.3 is vulnerable. |
| CometBFT is a distributed, Byzantine fault-tolerant, deterministic state machine replication engine. In the `blocksync` protocol peers send their `base` and `latest` heights when they connect to a new node (`A`), which is syncing to the tip of a network. `base` acts as a lower ground and informs `A` that the peer only has blocks starting from height `base`. `latest` height informs `A` about the latest block in a network. Normally, nodes would only report increasing heights. If `B` fails to provide the latest block, `B` is removed and the `latest` height (target height) is recalculated based on other nodes `latest` heights. The existing code however doesn't check for the case where `B` first reports `latest` height `X` and immediately after height `Y`, where `X > Y`. `A` will be trying to catch up to 2000 indefinitely. This condition requires the introduction of malicious code in the full node first reporting some non-existing `latest` height, then reporting lower `latest` height and nodes which are syncing using `blocksync` protocol. This issue has been patched in versions 1.0.1 and 0.38.17 and all users are advised to upgrade. Operators may attempt to ban malicious peers from the network as a workaround. |
| A vulnerability, which was classified as critical, has been found in bwoodsend rockhopper up to 0.1.2. Affected by this issue is the function count_rows of the file rockhopper/src/ragged_array.c of the component Binary Parser. The manipulation of the argument raw leads to buffer overflow. Local access is required to approach this attack. Upgrading to version 0.2.0 is able to address this issue. The name of the patch is 1a15fad5e06ae693eb9b8908363d2c8ef455104e. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-266312. |
