Export limit exceeded: 47877 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (47319 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-65821 | 2 Espressif, Meatmeet | 3 Esp32, Meatmeet Pro Wifi \& Bluetooth Meat Thermometer, Meatmeet Pro Wifi \& Bluetooth Meat Thermometer Firmware | 2026-01-21 | 7.5 High |
| As UART download mode is still enabled on the ESP32 chip on which the firmware runs, an adversary can dump the flash from the device and retrieve sensitive information such as details about the current and previous Wi-Fi network from the NVS partition. Additionally, this allows the adversary to reflash the device with their own firmware which may contain malicious modifications. | ||||
| CVE-2025-65822 | 2 Espressif, Meatmeet | 3 Esp32, Meatmeet Pro Wifi \& Bluetooth Meat Thermometer, Meatmeet Pro Wifi \& Bluetooth Meat Thermometer Firmware | 2026-01-21 | 6.8 Medium |
| The ESP32 system on a chip (SoC) that powers the Meatmeet Pro was found to have JTAG enabled. By leaving JTAG enabled on an ESP32 in a commercial product an attacker with physical access to the device can connect over this port and reflash the device's firmware with malicious code which will be executed upon running. As a result, the victim will lose access to the functionality of their device and the attack may gain unauthorized access to the victim's Wi-Fi network by re-connecting to the SSID defined in the NVS partition of the device. | ||||
| CVE-2020-10188 | 7 Arista, Debian, Fedoraproject and 4 more | 10 Eos, Debian Linux, Fedora and 7 more | 2026-01-21 | 9.8 Critical |
| utility.c in telnetd in netkit telnet through 0.17 allows remote attackers to execute arbitrary code via short writes or urgent data, because of a buffer overflow involving the netclear and nextitem functions. | ||||
| CVE-2025-55089 | 1 Eclipse | 1 Threadx Filex | 2026-01-20 | 9.8 Critical |
| In FileX before 6.4.2, the file support module for Eclipse Foundation ThreadX, there was a possible buffer overflow in the FileX RAM disk driver. It could cause a remote execurtion after receiving a crafted sequence of packets | ||||
| CVE-2024-57440 | 1 Dlink | 2 Dsl-3788, Dsl-3788 Firmware | 2026-01-20 | 7.5 High |
| D-Link DSL-3788 revA1 1.01R1B036_EU_EN is vulnerable to Buffer Overflow via the COMM_MAKECustomMsg function of the webproc cgi | ||||
| CVE-2025-15083 | 2 Gztozed, Tozed | 3 Zlt M30s, Zlt M30s Firmware, Zlt M30s | 2026-01-20 | 2 Low |
| A vulnerability was determined in TOZED ZLT M30s up to 1.47. The affected element is an unknown function of the component UART Interface. Executing manipulation can lead to on-chip debug and test interface with improper access control. The physical device can be targeted for the attack. Attacks of this nature are highly complex. The exploitability is described as difficult. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-14549 | 1 Eclipse | 1 Omr | 2026-01-20 | 8.1 High |
| In the Eclipse OMR compiler component, since release 0.7.0, an optimization enabled for Eclipse OpenJ9 consumers of OMR on Z processors incorrectly handles NUL (0x00) characters during the Latin-compatible charset (UTF-8, ISO8859-1, ASCII, etc) to IBM-1047/037 translation sequence. This can cause the output byte array to be truncated, discarding the first NUL byte and all subsequent characters, and thereby exposing a possible buffer over-read problem. This issue is fixed in Eclipse OMR version 0.8.0. | ||||
| CVE-2025-57812 | 1 Openprinting | 2 Cups-filters, Libcupsfilters | 2026-01-20 | 3.7 Low |
| CUPS is a standards-based, open-source printing system, and `libcupsfilters` contains the code of the filters of the former `cups-filters` package as library functions to be used for the data format conversion tasks needed in Printer Applications. In CUPS-Filters versions up to and including 1.28.17 and libscupsfilters versions 2.0.0 through 2.1.1, CUPS-Filters's `imagetoraster` filter has an out of bounds read/write vulnerability in the processing of TIFF image files. While the pixel buffer is allocated with the number of pixels times a pre-calculated bytes-per-pixel value, the function which processes these pixels is called with a size of the number of pixels times 3. When suitable inputs are passed, the bytes-per-pixel value can be set to 1 and bytes outside of the buffer bounds get processed. In order to trigger the bug, an attacker must issue a print job with a crafted TIFF file, and pass appropriate print job options to control the bytes-per-pixel value of the output format. They must choose a printer configuration under which the `imagetoraster` filter or its C-function equivalent `cfFilterImageToRaster()` gets invoked. The vulnerability exists in both CUPS-Filters 1.x and the successor library libcupsfilters (CUPS-Filters 2.x). In CUPS-Filters 2.x, the vulnerable function is `_cfImageReadTIFF() in libcupsfilters`. When this function is invoked as part of `cfFilterImageToRaster()`, the caller passes a look-up-table during whose processing the out of bounds memory access happens. In CUPS-Filters 1.x, the equivalent functions are all found in the cups-filters repository, which is not split into subprojects yet, and the vulnerable code is in `_cupsImageReadTIFF()`, which is called through `cupsImageOpen()` from the `imagetoraster` tool. A patch is available in commit b69dfacec7f176281782e2f7ac44f04bf9633cfa. | ||||
| CVE-2025-71023 | 1 Tenda | 2 Ax3, Ax3 Firmware | 2026-01-20 | 7.5 High |
| Tenda AX-3 v16.03.12.10_CN was discovered to contain a stack overflow in the mac2 parameter of the fromAdvSetMacMtuWan function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. | ||||
| CVE-2025-70747 | 1 Tenda | 2 Ax1806, Ax1806 Firmware | 2026-01-20 | 7.5 High |
| Tenda AX-1806 v1.0.0.1 was discovered to contain a stack overflow in the serviceName parameter of the sub_65A28 function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. | ||||
| CVE-2025-71021 | 1 Tenda | 2 Ax1806, Ax1806 Firmware | 2026-01-20 | 7.5 High |
| Tenda AX-1806 v1.0.0.1 was discovered to contain a stack overflow in the serverName parameter of the sub_65A28 function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. | ||||
| CVE-2025-70744 | 1 Tenda | 2 Ax1806, Ax1806 Firmware | 2026-01-20 | 7.5 High |
| Tenda AX-1806 v1.0.0.1 was discovered to contain a stack overflow in the cloneType parameter of the sub_65B5C function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. | ||||
| CVE-2025-14425 | 1 Gimp | 1 Gimp | 2026-01-20 | 7.8 High |
| GIMP JP2 File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of JP2 files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28248. | ||||
| CVE-2025-71019 | 1 Tenda | 2 Ax1806, Ax1806 Firmware | 2026-01-20 | 7.5 High |
| Tenda AX-1806 v1.0.0.1 was discovered to contain a stack overflow in the wanSpeed parameter of the sub_65B5C function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. | ||||
| CVE-2025-70656 | 1 Tenda | 2 Ax1806, Ax1806 Firmware | 2026-01-20 | 7.5 High |
| Tenda AX-1806 v1.0.0.1 was discovered to contain a stack overflow in the mac parameter of the sub_65B5C function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. | ||||
| CVE-2022-50428 | 1 Linux | 1 Linux Kernel | 2026-01-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix off-by-one errors in fast-commit block filling Due to several different off-by-one errors, or perhaps due to a late change in design that wasn't fully reflected in the code that was actually merged, there are several very strange constraints on how fast-commit blocks are filled with tlv entries: - tlvs must start at least 10 bytes before the end of the block, even though the minimum tlv length is 8. Otherwise, the replay code will ignore them. (BUG: ext4_fc_reserve_space() could violate this requirement if called with a len of blocksize - 9 or blocksize - 8. Fortunately, this doesn't seem to happen currently.) - tlvs must end at least 1 byte before the end of the block. Otherwise the replay code will consider them to be invalid. This quirk contributed to a bug (fixed by an earlier commit) where uninitialized memory was being leaked to disk in the last byte of blocks. Also, strangely these constraints don't apply to the replay code in e2fsprogs, which will accept any tlvs in the blocks (with no bounds checks at all, but that is a separate issue...). Given that this all seems to be a bug, let's fix it by just filling blocks with tlv entries in the natural way. Note that old kernels will be unable to replay fast-commit journals created by kernels that have this commit. | ||||
| CVE-2025-43025 | 1 Hp | 1 Universal Print Driver | 2026-01-20 | 7.5 High |
| HP Universal Print Driver is potentially vulnerable to denial of service due to buffer overflow in versions of UPD 7.4 or older (e.g., v7.3.x, v7.2.x, v7.1.x, etc.). | ||||
| CVE-2025-25200 | 1 Koajs | 1 Koa | 2026-01-20 | 7.5 High |
| Koa is expressive middleware for Node.js using ES2017 async functions. Prior to versions 0.21.2, 1.7.1, 2.15.4, and 3.0.0-alpha.3, Koa uses an evil regex to parse the `X-Forwarded-Proto` and `X-Forwarded-Host` HTTP headers. This can be exploited to carry out a Denial-of-Service attack. Versions 0.21.2, 1.7.1, 2.15.4, and 3.0.0-alpha.3 fix the issue. | ||||
| CVE-2025-10543 | 1 Eclipse | 2 Paho Go Mqtt, Paho Mqtt | 2026-01-16 | 5.3 Medium |
| In Eclipse Paho Go MQTT v3.1 library (paho.mqtt.golang) versions <=1.5.0 UTF-8 encoded strings, passed into the library, may be incorrectly encoded if their length exceeds 65535 bytes. This may lead to unexpected content in packets sent to the server (for example, part of an MQTT topic may leak into the message body in a PUBLISH packet). The issue arises because the length of the data passed in was converted from an int64/int32 (depending upon CPU) to an int16 without checks for overflows. The int16 length was then written, followed by the data (e.g. topic). This meant that when the data (e.g. topic) was over 65535 bytes then the amount of data written exceeds what the length field indicates. This could lead to a corrupt packet, or mean that the excess data leaks into another field (e.g. topic leaks into message body). | ||||
| CVE-2023-53259 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF The call to get_user_pages_fast() in vmci_host_setup_notify() can return NULL context->notify_page causing a GPF. To avoid GPF check if context->notify_page == NULL and return error if so. general protection fault, probably for non-canonical address 0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x0005088000000300- 0x0005088000000307] CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014 RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0 Call Trace: <TASK> vmci_host_unlocked_ioctl+0x362/0x1f40 __x64_sys_ioctl+0x1a1/0x230 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||