| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
qed: allow sleep in qed_mcp_trace_dump()
By default, qed_mcp_cmd_and_union() delays 10us at a time in a loop
that can run 500K times, so calls to qed_mcp_nvm_rd_cmd()
may block the current thread for over 5s.
We observed thread scheduling delays over 700ms in production,
with stacktraces pointing to this code as the culprit.
qed_mcp_trace_dump() is called from ethtool, so sleeping is permitted.
It already can sleep in qed_mcp_halt(), which calls qed_mcp_cmd().
Add a "can sleep" parameter to qed_find_nvram_image() and
qed_nvram_read() so they can sleep during qed_mcp_trace_dump().
qed_mcp_trace_get_meta_info() and qed_mcp_trace_read_meta(),
called only by qed_mcp_trace_dump(), allow these functions to sleep.
I can't tell if the other caller (qed_grc_dump_mcp_hw_dump()) can sleep,
so keep b_can_sleep set to false when it calls these functions.
An example stacktrace from a custom warning we added to the kernel
showing a thread that has not scheduled despite long needing resched:
[ 2745.362925,17] ------------[ cut here ]------------
[ 2745.362941,17] WARNING: CPU: 23 PID: 5640 at arch/x86/kernel/irq.c:233 do_IRQ+0x15e/0x1a0()
[ 2745.362946,17] Thread not rescheduled for 744 ms after irq 99
[ 2745.362956,17] Modules linked in: ...
[ 2745.363339,17] CPU: 23 PID: 5640 Comm: lldpd Tainted: P O 4.4.182+ #202104120910+6d1da174272d.61x
[ 2745.363343,17] Hardware name: FOXCONN MercuryB/Quicksilver Controller, BIOS H11P1N09 07/08/2020
[ 2745.363346,17] 0000000000000000 ffff885ec07c3ed8 ffffffff8131eb2f ffff885ec07c3f20
[ 2745.363358,17] ffffffff81d14f64 ffff885ec07c3f10 ffffffff81072ac2 ffff88be98ed0000
[ 2745.363369,17] 0000000000000063 0000000000000174 0000000000000074 0000000000000000
[ 2745.363379,17] Call Trace:
[ 2745.363382,17] <IRQ> [<ffffffff8131eb2f>] dump_stack+0x8e/0xcf
[ 2745.363393,17] [<ffffffff81072ac2>] warn_slowpath_common+0x82/0xc0
[ 2745.363398,17] [<ffffffff81072b4c>] warn_slowpath_fmt+0x4c/0x50
[ 2745.363404,17] [<ffffffff810d5a8e>] ? rcu_irq_exit+0xae/0xc0
[ 2745.363408,17] [<ffffffff817c99fe>] do_IRQ+0x15e/0x1a0
[ 2745.363413,17] [<ffffffff817c7ac9>] common_interrupt+0x89/0x89
[ 2745.363416,17] <EOI> [<ffffffff8132aa74>] ? delay_tsc+0x24/0x50
[ 2745.363425,17] [<ffffffff8132aa04>] __udelay+0x34/0x40
[ 2745.363457,17] [<ffffffffa04d45ff>] qed_mcp_cmd_and_union+0x36f/0x7d0 [qed]
[ 2745.363473,17] [<ffffffffa04d5ced>] qed_mcp_nvm_rd_cmd+0x4d/0x90 [qed]
[ 2745.363490,17] [<ffffffffa04e1dc7>] qed_mcp_trace_dump+0x4a7/0x630 [qed]
[ 2745.363504,17] [<ffffffffa04e2556>] ? qed_fw_asserts_dump+0x1d6/0x1f0 [qed]
[ 2745.363520,17] [<ffffffffa04e4ea7>] qed_dbg_mcp_trace_get_dump_buf_size+0x37/0x80 [qed]
[ 2745.363536,17] [<ffffffffa04ea881>] qed_dbg_feature_size+0x61/0xa0 [qed]
[ 2745.363551,17] [<ffffffffa04eb427>] qed_dbg_all_data_size+0x247/0x260 [qed]
[ 2745.363560,17] [<ffffffffa0482c10>] qede_get_regs_len+0x30/0x40 [qede]
[ 2745.363566,17] [<ffffffff816c9783>] ethtool_get_drvinfo+0xe3/0x190
[ 2745.363570,17] [<ffffffff816cc152>] dev_ethtool+0x1362/0x2140
[ 2745.363575,17] [<ffffffff8109bcc6>] ? finish_task_switch+0x76/0x260
[ 2745.363580,17] [<ffffffff817c2116>] ? __schedule+0x3c6/0x9d0
[ 2745.363585,17] [<ffffffff810dbd50>] ? hrtimer_start_range_ns+0x1d0/0x370
[ 2745.363589,17] [<ffffffff816c1e5b>] ? dev_get_by_name_rcu+0x6b/0x90
[ 2745.363594,17] [<ffffffff816de6a8>] dev_ioctl+0xe8/0x710
[ 2745.363599,17] [<ffffffff816a58a8>] sock_do_ioctl+0x48/0x60
[ 2745.363603,17] [<ffffffff816a5d87>] sock_ioctl+0x1c7/0x280
[ 2745.363608,17] [<ffffffff8111f393>] ? seccomp_phase1+0x83/0x220
[ 2745.363612,17] [<ffffffff811e3503>] do_vfs_ioctl+0x2b3/0x4e0
[ 2745.363616,17] [<ffffffff811e3771>] SyS_ioctl+0x41/0x70
[ 2745.363619,17] [<ffffffff817c6ffe>] entry_SYSCALL_64_fastpath+0x1e/0x79
[ 2745.363622,17] ---[ end trace f6954aa440266421 ]--- |
| A static password reset token in the password reset function of DDSN Interactive Acora CMS v10.7.1 allows attackers to arbitrarily reset the user password and execute a full account takeover via a replay attack. |
| D3D Wi-Fi Home Security System ZX-G12 v2.1.17 is susceptible to RF jamming on the 433 MHz alarm sensor channel. An attacker within RF range can transmit continuous interference to block sensor transmissions, resulting in missed alarms and loss of security monitoring. The device lacks jamming detection or mitigations, creating a denial-of-service condition that may lead to undetected intrusions or failure to trigger safety alerts. |
| Deserialization of Untrusted Data vulnerability in ThemeGoods Photography.This issue affects Photography: from n/a through 7.5.2. |
| A path traversal vulnerability exists in Zen MCP Server before 9.8.2 that allows authenticated attackers to read arbitrary files on the system. The vulnerability is caused by flawed logic in the is_dangerous_path() validation function that uses exact string matching against a blacklist of system directories. Attackers can bypass these restrictions by accessing subdirectories of blacklisted paths. |
| Cross Site Scripting vulnerability in 66biolinks by AltumCode v.61.0.1 allows an attacker to execute arbitrary code via a crafted favicon file |
| A DLL hijacking vulnerability in Axtion ODISSAAS ODIS v1.8.4 allows attackers to execute arbitrary code via a crafted DLL file. |
| An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a logically adjacent downstream RSVP neighbor to cause kernel memory exhaustion, leading to a kernel crash, resulting in a Denial of Service (DoS).
The kernel memory leak and eventual crash will be seen when the downstream RSVP neighbor has a persistent error which will not be corrected.
System kernel memory can be monitored through the use of the 'show system kernel memory' command as shown below:
user@router> show system kernel memory
Real memory total/reserved: 4130268/ 133344 Kbytes
kmem map free: 18014398509110220 Kbytes
This issue affects:
Junos OS:
* All versions before 20.4R3-S9,
* All versions of 21.2,
* from 21.4 before 21.4R3-S5,
* from 22.1 before 22.1R3-S5,
* from 22.2 before 22.2R3-S3,
* from 22.3 before 22.3R3-S2,
* from 22.4 before 22.4R3,
* from 23.2 before 23.2R2;
Junos OS Evolved:
* All versions before 21.4R3-S5-EVO,
* from 22.1-EVO before 22.1R3-S5-EVO,
* from 22.2-EVO before 22.2R3-S3-EVO,
* from 22.3-EVO before 22.3R3-S2-EVO,
* from 22.4-EVO before 22.4R3-EVO,
* from 23.2-EVO before 23.2R2-EVO. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on SRX Series and NFX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
If an affected device receives specific valid traffic destined to the device, it will cause the PFE to crash and restart. Continued receipt and processing of this traffic will create a sustained DoS condition.
This issue affects Junos OS on SRX Series:
* 21.4 versions before 21.4R3-S7.9,
* 22.1 versions before 22.1R3-S5.3,
* 22.2 versions before 22.2R3-S4.11,
* 22.3 versions before 22.3R3,
* 22.4 versions before 22.4R3.
This issue affects Junos OS on NFX Series:
* 21.4 versions before 21.4R3-S8,
* 22.1 versions after 22.1R1,
* 22.2 versions before 22.2R3-S5,
* 22.3 versions before 22.3R3,
* 22.4 versions before 22.4R3.
Junos OS versions prior to 21.4R1 are not affected by this issue. |
| SQL injection vulnerability in pss.sale.com 1.0 via the id parameter to the userfiles/php/cancel_order.php endpoint. |
| A lack of rate limiting in the login page of shiori v1.7.4 and below allows attackers to bypass authentication via a brute force attack. |
| In TIM BPM Suite/ TIM FLOW through 9.1.2 multiple SQL injection vulnerabilities exists which allow a low privileged and administrative user to access the database and its content. |
| In TIM BPM Suite/ TIM FLOW through 9.1.2 multiple Hibernate Query Language injection vulnerabilities exist which allow a low privileged user to extract passwords of other users and access sensitive data of another user. |
| An issue in TIM Solution GmbH TIM BPM Suite & TIM FLOW before v.9.1.2 allows a remote attacker to escalate privileges via the application stores password hashes in MD5 format |
| In TIM BPM Suite/ TIM FLOW through 9.1.2 multiple Authorization Bypass vulnerabilities exists which allow a low privileged user to download password hashes of other user, access work items of other user, modify restricted content in workflows, modify the applications logo and manipulate the profile of other user. |
| An issue in TIM Solution GmbH TIM BPM Suite & TIM FLOW before v.9.1.2 allows a remote attacker to escalate privileges via a crafted HTTP request |
| 5ire is a cross-platform desktop artificial intelligence assistant and model context protocol client. Versions prior to 0.11.1 are vulnerable to stored cross-site scripting in chatbot responses due to insufficient sanitization. This, in turn, can lead to Remote Code Execution (RCE) via unsafe Electron protocol handling and exposed Electron APIs. All users of 5ire client versions prior to patched releases, particularly those interacting with untrusted chatbots or pasting external content, are affected. Version 0.11.1 contains a patch for the issue. |
| An Insertion of Sensitive Information into Log File vulnerability in Juniper Networks Junos OS and Junos OS Evolved allows a local, authenticated attacker with high privileges to access sensitive information.
When another user performs a specific operation, sensitive information is stored as plain text in a specific log file, so that a high-privileged attacker has access to this information.
This issue affects:
Junos OS:
* All versions before 21.2R3-S9;
*
21.4 versions before 21.4R3-S9;
* 22.2 versions before 22.2R2-S1, 22.2R3;
* 22.3 versions before 22.3R1-S1, 22.3R2;
Junos OS Evolved:
* All versions before before 22.1R3-EVO;
* 22.2-EVO versions before 22.2R2-S1-EVO, 22.2R3-EVO;
* 22.3-EVO versions before 22.3R1-S1-EVO, 22.3R2-EVO. |
| Sony BRAVIA Digital Signage 1.7.8 contains an information disclosure vulnerability that allows unauthenticated attackers to access sensitive system details through API endpoints. Attackers can retrieve network interface information, server configurations, and system metadata by sending requests to the exposed system API. |
| An Improper Handling of Values vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved on ACX 7000 Series allows a network-based, unauthenticated attacker to cause a Denial-of-Service (DoS).
If a value is configured for DDoS bandwidth or burst parameters for any protocol in
a queue, all protocols which share the same queue will have
their bandwidth or burst value changed to the new value. If, for example, OSPF was configured with a certain bandwidth value, ISIS would also be limited to this value. So inadvertently either the control plane is open for a high level of specific traffic which was supposed to be limited to a lower value, or the limit for a certain protocol is so low that chances to succeed with a volumetric DoS attack are significantly increased.
This issue affects Junos OS Evolved on ACX 7000 Series:
* All versions before 21.4R3-S7-EVO,
* 22.1 versions before 22.1R3-S6-EVO,
* 22.2 versions before 22.2R3-S3-EVO,
* 22.3 versions before 22.3R3-S3-EVO,
* 22.4 versions before 22.4R3-S2-EVO,
* 23.2 versions before 23.2R2-EVO,
* 23.4
versions
before 23.4R1-S1-EVO, 23.4R2-EVO. |
