| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Ruby SAML library is for implementing the client side of a SAML authorization. In versions 1.18.0 and below, a denial-of-service vulnerability exists in ruby-saml even with the message_max_bytesize setting configured. The vulnerability occurs because the SAML response is validated for Base64 format prior to checking the message size, leading to potential resource exhaustion. This is fixed in version 1.18.1. |
| vproxy is an HTTP/HTTPS/SOCKS5 proxy server. In versions 2.3.3 and below, untrusted data is extracted from the user-controlled HTTP Proxy-Authorization header and passed to Extension::try_from and flows into parse_ttl_extension where it is parsed as a TTL value. If an attacker supplies a TTL of zero (e.g. by using a username such as 'configuredUser-ttl-0'), the modulo operation 'timestamp % ttl' will cause a division by zero panic, causing the server to crash causing a denial-of-service. This is fixed in version 2.4.0. |
| A flaw has been found in ZhenShi Mibro Fit App 1.6.3.17499 on Android. This impacts an unknown function of the file AndroidManifest.xml of the component com.xiaoxun.xunoversea.mibrofit. This manipulation causes improper export of android application components. The attack requires local access. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Ant Media Server Community Edition in a default configuration is vulnerable to an improper HTTP header based authorization, leading to a possible use of non-administrative API calls reserved only for authorized users.
All versions up to 2.9.0 (tested) and possibly newer ones are believed to be vulnerable as the vendor has not confirmed releasing a patch. |
| CreateWiki is Miraheze's MediaWiki extension for requesting & creating wikis. It is possible for users to be considered as the requester of a specific wiki request if their local user ID on any wiki in a wiki farm matches the local ID of the requester at the wiki where the wiki request was made. This allows them to go to that request entry's on Special:RequestWikiQueue on the wiki where their local user ID matches and take any actions that the wiki requester is allowed to take from there.
Commit 02e0f298f8d35155c39aa74193cb7b867432c5b8 fixes the issue. Important note about the fix: This vulnerability has been fixed by disabling access to the REST API and special pages outside of the wiki configured as the "global wiki" in `$wgCreateWikiGlobalWiki` in a user's MediaWiki settings.
As a workaround, it is possible to disable the special pages outside of one's own global wiki by doing something similar to `miraheze/mw-config` commit e5664995fbb8644f9a80b450b4326194f20f9ddc that is adapted to one's own setup. As for the REST API, before the fix, there wasn't any REST endpoint that allowed one to make writes. Regardless, it is possible to also disable it outside of the global wiki by using `$wgCreateWikiDisableRESTAPI` and `$wgConf` in the configuration for one's own wiki farm.. |
| The Header Footer Code Manager Pro plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the message parameter in all versions up to, and including, 1.0.16 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| A vulnerability has been found in wp-file-upload Plugin up to 2.4.3 on WordPress and classified as problematic. Affected by this vulnerability is the function wfu_ajax_action_callback of the file lib/wfu_ajaxactions.php. The manipulation leads to cross site scripting. The attack can be launched remotely. Upgrading to version 2.4.4 is able to address this issue. The identifier of the patch is c846327df030a0a97da036a2f07c769ab9284ddb. It is recommended to upgrade the affected component. The identifier VDB-258781 was assigned to this vulnerability. |
| A vulnerability was found in chrisy TFO Graphviz Plugin up to 1.9 on WordPress and classified as problematic. Affected by this issue is the function admin_page_load/admin_page of the file tfo-graphviz-admin.php. The manipulation leads to cross site scripting. The attack may be launched remotely. Upgrading to version 1.10 is able to address this issue. The name of the patch is 594c953a345f79e26003772093b0caafc14b92c2. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-258620. |
| The Dyson MQTT server (2022 and possibly later) allows publications and subscriptions by a client that has the correct values of AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY, AWS_SESSION_TOKEN, and device serial number, even if a device (such as a Pure Hot+Cool device) has been removed and is not visible in the supported MyDyson app. This could allow an unexpected actor to obtain control and set the room temperature (up to 37 Celsius) if ownership of the device is transferred without wiping the device. NOTE: the Supplier's position is that this is a potential vulnerability that dates back 4 years ago in 2022 and "we are unable to replicate that anymore." Based on the submitted report, in order to leverage this issue, an attacker needs to own a Dyson device with full privileges, sniff for the AWS credentials, and then transfer ownership of that Dyson device to the victim. Even if these steps were successfully accomplished, the attacker only acquires the ability to configure the Dyson device within its safe operating range, and does not acquire the ability to execute code on the device or obtain sensitive information. |
| CoreDNS is a DNS server that chains plugins. Starting in version 1.2.0 and prior to version 1.12.4, the CoreDNS etcd plugin contains a TTL confusion vulnerability where lease IDs are incorrectly used as TTL values, enabling DNS cache pinning attacks. This effectively creates a DoS condition for DNS resolution of affected services. The `TTL()` function in `plugin/etcd/etcd.go` incorrectly casts etcd lease IDs (64-bit integers) to uint32 and uses them as TTL values. Large lease IDs become very large TTLs when cast to uint32. This enables cache pinning attacks. Version 1.12.4 contains a fix for the issue. |
| tar.Reader does not set a maximum size on the number of sparse region data blocks in GNU tar pax 1.0 sparse files. A maliciously-crafted archive containing a large number of sparse regions can cause a Reader to read an unbounded amount of data from the archive into memory. When reading from a compressed source, a small compressed input can result in large allocations. |
| ** UNSUPPORTED WHEN ASSIGNED ** ** DISPUTED ** A vulnerability has been found in cyberaz0r WebRAT up to 20191222 and classified as critical. This vulnerability affects the function download_file of the file Server/api.php. The manipulation of the argument name leads to unrestricted upload. The attack can be initiated remotely. The real existence of this vulnerability is still doubted at the moment. The patch is identified as 0c394a795b9c10c07085361e6fcea286ee793701. It is recommended to apply a patch to fix this issue. VDB-257782 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: The issue, discovered in a 20-stars GitHub project (now private) by its author, had CVE requested by a third party 4 years post-resolution, referencing the fix commit (now a broken link). Due to minimal attention and usage, it should not be eligible for CVE according to the project maintainer. |
| Infrahub offers a central hub to manage data, templates, and playbooks. Prior to versiond 1.3.9 and 1.4.5, a bug in the authentication logic will cause API tokens that were deleted and/or expired to be considered valid. This means that any API token that is associated with an active user account can authenticate successfully. This issue is fixed in versions 1.3.9 and 1.4.5. As a workaround, users can delete or deactivate the account associated with a deleted API token to prevent that token from authenticating. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. Himmelblau 0.9.x derives numeric GIDs for Entra ID groups from the group display name when himmelblau.conf `id_attr_map = name` (the default configuration). Because Microsoft Entra ID allows multiple groups with the same `displayName` (including end-user–created personal/O365 groups, depending on tenant policy), distinct directory groups can collapse to the same numeric GID on Linux. This issue only applies to Himmelblau versions 0.9.0 through 0.9.22. Any resource or service on a Himmelblau-joined host that enforces authorization by numeric GID (files/dirs, etc.) can be unintentionally accessible to a user who creates or joins a different Entra/O365 group that happens to share the same `displayName` as a privileged security group. Users should upgrade to 0.9.23, or 1.0.0 or later, to receive a patch. Group to GID mapping now uses Entra ID object IDs (GUIDs) and does not collide on same-name groups. As a workaround, use tenant policy hardening to restrict arbitrary group creation until all hosts are patched. |
| Cross-Site Request Forgery (CSRF) vulnerability in Allegro Marketing hpb seo plugin for WordPress hpbseo allows Reflected XSS.This issue affects hpb seo plugin for WordPress: from n/a through <= 3.0.1. |
| memoQ 10.1.13.ef1b2b52aae and earlier contains an unquoted service path vulnerability in the memoQ Auto Update Service (memoQauhlp101). The affected service is installed with a path containing spaces and without surrounding quotes. This misconfiguration allows local users to escalate privileges to SYSTEM by placing a malicious executable at C:\Program.exe. |
| SPH Engineering UgCS 5.13.0 is vulnerable to Arbitary code execution. |
| Incorrect access control in the kernel driver of ThreatFire System Monitor v4.7.0.53 allows attackers to escalate privileges and execute arbitrary commands via an insecure IOCTL. |
| DLL hijacking vulnerability in Evope Collector 1.1.6.9.0 and related components load the wtsapi32.dll library from an uncontrolled search path (C:\ProgramData\Evope). This allows local unprivileged attackers to execute arbitrary code or escalate privileges to SYSTEM by placing a crafted DLL in that location. The vulnerable component is Evope.Service.exe, which runs with SYSTEM privileges and automatically loads the DLL on startup or reboot. |
| Incorrect access control on Dataphone A920 v2025.07.161103 exposes a service on port 8888 by default on the local network without authentication. This allows an attacker to interact with the device via a TCP socket without credentials. Additionally, sending an HTTP request to the service on port 8888 triggers an error in the response, which exposes the functionality, headers identifying Paytef dataphone packets, and the build version. |
