Export limit exceeded: 25008 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25008 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54211 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix warning in trace_buffered_event_disable() Warning happened in trace_buffered_event_disable() at WARN_ON_ONCE(!trace_buffered_event_ref) Call Trace: ? __warn+0xa5/0x1b0 ? trace_buffered_event_disable+0x189/0x1b0 __ftrace_event_enable_disable+0x19e/0x3e0 free_probe_data+0x3b/0xa0 unregister_ftrace_function_probe_func+0x6b8/0x800 event_enable_func+0x2f0/0x3d0 ftrace_process_regex.isra.0+0x12d/0x1b0 ftrace_filter_write+0xe6/0x140 vfs_write+0x1c9/0x6f0 [...] The cause of the warning is in __ftrace_event_enable_disable(), trace_buffered_event_enable() was called once while trace_buffered_event_disable() was called twice. Reproduction script show as below, for analysis, see the comments: ``` #!/bin/bash cd /sys/kernel/tracing/ # 1. Register a 'disable_event' command, then: # 1) SOFT_DISABLED_BIT was set; # 2) trace_buffered_event_enable() was called first time; echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \ set_ftrace_filter # 2. Enable the event registered, then: # 1) SOFT_DISABLED_BIT was cleared; # 2) trace_buffered_event_disable() was called first time; echo 1 > events/initcall/initcall_finish/enable # 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was # set again!!! cat /proc/cmdline # 4. Unregister the 'disable_event' command, then: # 1) SOFT_DISABLED_BIT was cleared again; # 2) trace_buffered_event_disable() was called second time!!! echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \ set_ftrace_filter ``` To fix it, IIUC, we can change to call trace_buffered_event_enable() at fist time soft-mode enabled, and call trace_buffered_event_disable() at last time soft-mode disabled. | ||||
| CVE-2025-40065 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Write hgatp register with valid mode bits According to the RISC-V Privileged Architecture Spec, when MODE=Bare is selected,software must write zero to the remaining fields of hgatp. We have detected the valid mode supported by the HW before, So using a valid mode to detect how many vmid bits are supported. | ||||
| CVE-2023-54261 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add missing gfx11 MQD manager callbacks mqd_stride function was introduced in commit 2f77b9a242a2 ("drm/amdkfd: Update MQD management on multi XCC setup") but not assigned for gfx11. Fixes a NULL dereference in debugfs. | ||||
| CVE-2023-54222 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id() The "map_sz" is the number of elements in the "m" array so the > comparison needs to be changed to >= to prevent an out of bounds read. | ||||
| CVE-2023-54224 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix lockdep splat and potential deadlock after failure running delayed items When running delayed items we are holding a delayed node's mutex and then we will attempt to modify a subvolume btree to insert/update/delete the delayed items. However if have an error during the insertions for example, btrfs_insert_delayed_items() may return with a path that has locked extent buffers (a leaf at the very least), and then we attempt to release the delayed node at __btrfs_run_delayed_items(), which requires taking the delayed node's mutex, causing an ABBA type of deadlock. This was reported by syzbot and the lockdep splat is the following: WARNING: possible circular locking dependency detected 6.5.0-rc7-syzkaller-00024-g93f5de5f648d #0 Not tainted ------------------------------------------------------ syz-executor.2/13257 is trying to acquire lock: ffff88801835c0c0 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node+0x9a/0xaa0 fs/btrfs/delayed-inode.c:256 but task is already holding lock: ffff88802a5ab8e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_lock+0x3c/0x2a0 fs/btrfs/locking.c:198 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (btrfs-tree-00){++++}-{3:3}: __lock_release kernel/locking/lockdep.c:5475 [inline] lock_release+0x36f/0x9d0 kernel/locking/lockdep.c:5781 up_write+0x79/0x580 kernel/locking/rwsem.c:1625 btrfs_tree_unlock_rw fs/btrfs/locking.h:189 [inline] btrfs_unlock_up_safe+0x179/0x3b0 fs/btrfs/locking.c:239 search_leaf fs/btrfs/ctree.c:1986 [inline] btrfs_search_slot+0x2511/0x2f80 fs/btrfs/ctree.c:2230 btrfs_insert_empty_items+0x9c/0x180 fs/btrfs/ctree.c:4376 btrfs_insert_delayed_item fs/btrfs/delayed-inode.c:746 [inline] btrfs_insert_delayed_items fs/btrfs/delayed-inode.c:824 [inline] __btrfs_commit_inode_delayed_items+0xd24/0x2410 fs/btrfs/delayed-inode.c:1111 __btrfs_run_delayed_items+0x1db/0x430 fs/btrfs/delayed-inode.c:1153 flush_space+0x269/0xe70 fs/btrfs/space-info.c:723 btrfs_async_reclaim_metadata_space+0x106/0x350 fs/btrfs/space-info.c:1078 process_one_work+0x92c/0x12c0 kernel/workqueue.c:2600 worker_thread+0xa63/0x1210 kernel/workqueue.c:2751 kthread+0x2b8/0x350 kernel/kthread.c:389 ret_from_fork+0x2e/0x60 arch/x86/kernel/process.c:145 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 -> #0 (&delayed_node->mutex){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144 lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761 __mutex_lock_common+0x1d8/0x2530 kernel/locking/mutex.c:603 __mutex_lock kernel/locking/mutex.c:747 [inline] mutex_lock_nested+0x1b/0x20 kernel/locking/mutex.c:799 __btrfs_release_delayed_node+0x9a/0xaa0 fs/btrfs/delayed-inode.c:256 btrfs_release_delayed_node fs/btrfs/delayed-inode.c:281 [inline] __btrfs_run_delayed_items+0x2b5/0x430 fs/btrfs/delayed-inode.c:1156 btrfs_commit_transaction+0x859/0x2ff0 fs/btrfs/transaction.c:2276 btrfs_sync_file+0xf56/0x1330 fs/btrfs/file.c:1988 vfs_fsync_range fs/sync.c:188 [inline] vfs_fsync fs/sync.c:202 [inline] do_fsync fs/sync.c:212 [inline] __do_sys_fsync fs/sync.c:220 [inline] __se_sys_fsync fs/sync.c:218 [inline] __x64_sys_fsync+0x196/0x1e0 fs/sync.c:218 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info that ---truncated--- | ||||
| CVE-2023-54225 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ipa: only reset hashed tables when supported Last year, the code that manages GSI channel transactions switched from using spinlock-protected linked lists to using indexes into the ring buffer used for a channel. Recently, Google reported seeing transaction reference count underflows occasionally during shutdown. Doug Anderson found a way to reproduce the issue reliably, and bisected the issue to the commit that eliminated the linked lists and the lock. The root cause was ultimately determined to be related to unused transactions being committed as part of the modem shutdown cleanup activity. Unused transactions are not normally expected (except in error cases). The modem uses some ranges of IPA-resident memory, and whenever it shuts down we zero those ranges. In ipa_filter_reset_table() a transaction is allocated to zero modem filter table entries. If hashing is not supported, hashed table memory should not be zeroed. But currently nothing prevents that, and the result is an unused transaction. Something similar occurs when we zero routing table entries for the modem. By preventing any attempt to clear hashed tables when hashing is not supported, the reference count underflow is avoided in this case. Note that there likely remains an issue with properly freeing unused transactions (if they occur due to errors). This patch addresses only the underflows that Google originally reported. | ||||
| CVE-2023-54260 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix lost destroy smbd connection when MR allocate failed If the MR allocate failed, the smb direct connection info is NULL, then smbd_destroy() will directly return, then the connection info will be leaked. Let's set the smb direct connection info to the server before call smbd_destroy(). | ||||
| CVE-2023-54270 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: usb: siano: Fix use after free bugs caused by do_submit_urb There are UAF bugs caused by do_submit_urb(). One of the KASan reports is shown below: [ 36.403605] BUG: KASAN: use-after-free in worker_thread+0x4a2/0x890 [ 36.406105] Read of size 8 at addr ffff8880059600e8 by task kworker/0:2/49 [ 36.408316] [ 36.408867] CPU: 0 PID: 49 Comm: kworker/0:2 Not tainted 6.2.0-rc3-15798-g5a41237ad1d4-dir8 [ 36.411696] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584 [ 36.416157] Workqueue: 0x0 (events) [ 36.417654] Call Trace: [ 36.418546] <TASK> [ 36.419320] dump_stack_lvl+0x96/0xd0 [ 36.420522] print_address_description+0x75/0x350 [ 36.421992] print_report+0x11b/0x250 [ 36.423174] ? _raw_spin_lock_irqsave+0x87/0xd0 [ 36.424806] ? __virt_addr_valid+0xcf/0x170 [ 36.426069] ? worker_thread+0x4a2/0x890 [ 36.427355] kasan_report+0x131/0x160 [ 36.428556] ? worker_thread+0x4a2/0x890 [ 36.430053] worker_thread+0x4a2/0x890 [ 36.431297] ? worker_clr_flags+0x90/0x90 [ 36.432479] kthread+0x166/0x190 [ 36.433493] ? kthread_blkcg+0x50/0x50 [ 36.434669] ret_from_fork+0x22/0x30 [ 36.435923] </TASK> [ 36.436684] [ 36.437215] Allocated by task 24: [ 36.438289] kasan_set_track+0x50/0x80 [ 36.439436] __kasan_kmalloc+0x89/0xa0 [ 36.440566] smsusb_probe+0x374/0xc90 [ 36.441920] usb_probe_interface+0x2d1/0x4c0 [ 36.443253] really_probe+0x1d5/0x580 [ 36.444539] __driver_probe_device+0xe3/0x130 [ 36.446085] driver_probe_device+0x49/0x220 [ 36.447423] __device_attach_driver+0x19e/0x1b0 [ 36.448931] bus_for_each_drv+0xcb/0x110 [ 36.450217] __device_attach+0x132/0x1f0 [ 36.451470] bus_probe_device+0x59/0xf0 [ 36.452563] device_add+0x4ec/0x7b0 [ 36.453830] usb_set_configuration+0xc63/0xe10 [ 36.455230] usb_generic_driver_probe+0x3b/0x80 [ 36.456166] printk: console [ttyGS0] disabled [ 36.456569] usb_probe_device+0x90/0x110 [ 36.459523] really_probe+0x1d5/0x580 [ 36.461027] __driver_probe_device+0xe3/0x130 [ 36.462465] driver_probe_device+0x49/0x220 [ 36.463847] __device_attach_driver+0x19e/0x1b0 [ 36.465229] bus_for_each_drv+0xcb/0x110 [ 36.466466] __device_attach+0x132/0x1f0 [ 36.467799] bus_probe_device+0x59/0xf0 [ 36.469010] device_add+0x4ec/0x7b0 [ 36.470125] usb_new_device+0x863/0xa00 [ 36.471374] hub_event+0x18c7/0x2220 [ 36.472746] process_one_work+0x34c/0x5b0 [ 36.474041] worker_thread+0x4b7/0x890 [ 36.475216] kthread+0x166/0x190 [ 36.476267] ret_from_fork+0x22/0x30 [ 36.477447] [ 36.478160] Freed by task 24: [ 36.479239] kasan_set_track+0x50/0x80 [ 36.480512] kasan_save_free_info+0x2b/0x40 [ 36.481808] ____kasan_slab_free+0x122/0x1a0 [ 36.483173] __kmem_cache_free+0xc4/0x200 [ 36.484563] smsusb_term_device+0xcd/0xf0 [ 36.485896] smsusb_probe+0xc85/0xc90 [ 36.486976] usb_probe_interface+0x2d1/0x4c0 [ 36.488303] really_probe+0x1d5/0x580 [ 36.489498] __driver_probe_device+0xe3/0x130 [ 36.491140] driver_probe_device+0x49/0x220 [ 36.492475] __device_attach_driver+0x19e/0x1b0 [ 36.493988] bus_for_each_drv+0xcb/0x110 [ 36.495171] __device_attach+0x132/0x1f0 [ 36.496617] bus_probe_device+0x59/0xf0 [ 36.497875] device_add+0x4ec/0x7b0 [ 36.498972] usb_set_configuration+0xc63/0xe10 [ 36.500264] usb_generic_driver_probe+0x3b/0x80 [ 36.501740] usb_probe_device+0x90/0x110 [ 36.503084] really_probe+0x1d5/0x580 [ 36.504241] __driver_probe_device+0xe3/0x130 [ 36.505548] driver_probe_device+0x49/0x220 [ 36.506766] __device_attach_driver+0x19e/0x1b0 [ 36.508368] bus_for_each_drv+0xcb/0x110 [ 36.509646] __device_attach+0x132/0x1f0 [ 36.510911] bus_probe_device+0x59/0xf0 [ 36.512103] device_add+0x4ec/0x7b0 [ 36.513215] usb_new_device+0x863/0xa00 [ 36.514736] hub_event+0x18c7/0x2220 [ 36.516130] process_one_work+ ---truncated--- | ||||
| CVE-2023-53743 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Free released resource after coalescing release_resource() doesn't actually free the resource or resource list entry so free the resource list entry to avoid a leak. | ||||
| CVE-2022-50621 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm: verity-loadpin: Only trust verity targets with enforcement Verity targets can be configured to ignore corrupted data blocks. LoadPin must only trust verity targets that are configured to perform some kind of enforcement when data corruption is detected, like returning an error, restarting the system or triggering a panic. | ||||
| CVE-2022-50632 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drivers: perf: marvell_cn10k: Fix hotplug callback leak in tad_pmu_init() tad_pmu_init() won't remove the callback added by cpuhp_setup_state_multi() when platform_driver_register() failed. Remove the callback by cpuhp_remove_multi_state() in fail path. Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus: arm-ccn: Prevent hotplug callback leak") | ||||
| CVE-2023-54273 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix leak of dev tracker At the stage of direction checks, the netdev reference tracker is already initialized, but released with wrong *_put() call. | ||||
| CVE-2023-54274 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Add a check for valid 'mad_agent' pointer When unregistering MAD agent, srpt module has a non-null check for 'mad_agent' pointer before invoking ib_unregister_mad_agent(). This check can pass if 'mad_agent' variable holds an error value. The 'mad_agent' can have an error value for a short window when srpt_add_one() and srpt_remove_one() is executed simultaneously. In srpt module, added a valid pointer check for 'sport->mad_agent' before unregistering MAD agent. This issue can hit when RoCE driver unregisters ib_device Stack Trace: ------------ BUG: kernel NULL pointer dereference, address: 000000000000004d PGD 145003067 P4D 145003067 PUD 2324fe067 PMD 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 10 PID: 4459 Comm: kworker/u80:0 Kdump: loaded Tainted: P Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.5.4 01/13/2020 Workqueue: bnxt_re bnxt_re_task [bnxt_re] RIP: 0010:_raw_spin_lock_irqsave+0x19/0x40 Call Trace: ib_unregister_mad_agent+0x46/0x2f0 [ib_core] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready ? __schedule+0x20b/0x560 srpt_unregister_mad_agent+0x93/0xd0 [ib_srpt] srpt_remove_one+0x20/0x150 [ib_srpt] remove_client_context+0x88/0xd0 [ib_core] bond0: (slave p2p1): link status definitely up, 100000 Mbps full duplex disable_device+0x8a/0x160 [ib_core] bond0: active interface up! ? kernfs_name_hash+0x12/0x80 (NULL device *): Bonding Info Received: rdev: 000000006c0b8247 __ib_unregister_device+0x42/0xb0 [ib_core] (NULL device *): Master: mode: 4 num_slaves:2 ib_unregister_device+0x22/0x30 [ib_core] (NULL device *): Slave: id: 105069936 name:p2p1 link:0 state:0 bnxt_re_stopqps_and_ib_uninit+0x83/0x90 [bnxt_re] bnxt_re_alloc_lag+0x12e/0x4e0 [bnxt_re] | ||||
| CVE-2023-54324 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix a race condition in retrieve_deps There's a race condition in the multipath target when retrieve_deps races with multipath_message calling dm_get_device and dm_put_device. retrieve_deps walks the list of open devices without holding any lock but multipath may add or remove devices to the list while it is running. The end result may be memory corruption or use-after-free memory access. See this description of a UAF with multipath_message(): https://listman.redhat.com/archives/dm-devel/2022-October/052373.html Fix this bug by introducing a new rw semaphore "devices_lock". We grab devices_lock for read in retrieve_deps and we grab it for write in dm_get_device and dm_put_device. | ||||
| CVE-2023-54244 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: Fix oops when removing custom query handlers When removing custom query handlers, the handler might still be used inside the EC query workqueue, causing a kernel oops if the module holding the callback function was already unloaded. Fix this by flushing the EC query workqueue when removing custom query handlers. Tested on a Acer Travelmate 4002WLMi | ||||
| CVE-2023-54246 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rcuscale: Move rcu_scale_writer() schedule_timeout_uninterruptible() to _idle() The rcuscale.holdoff module parameter can be used to delay the start of rcu_scale_writer() kthread. However, the hung-task timeout will trigger when the timeout specified by rcuscale.holdoff is greater than hung_task_timeout_secs: runqemu kvm nographic slirp qemuparams="-smp 4 -m 2048M" bootparams="rcuscale.shutdown=0 rcuscale.holdoff=300" [ 247.071753] INFO: task rcu_scale_write:59 blocked for more than 122 seconds. [ 247.072529] Not tainted 6.4.0-rc1-00134-gb9ed6de8d4ff #7 [ 247.073400] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.074331] task:rcu_scale_write state:D stack:30144 pid:59 ppid:2 flags:0x00004000 [ 247.075346] Call Trace: [ 247.075660] <TASK> [ 247.075965] __schedule+0x635/0x1280 [ 247.076448] ? __pfx___schedule+0x10/0x10 [ 247.076967] ? schedule_timeout+0x2dc/0x4d0 [ 247.077471] ? __pfx_lock_release+0x10/0x10 [ 247.078018] ? enqueue_timer+0xe2/0x220 [ 247.078522] schedule+0x84/0x120 [ 247.078957] schedule_timeout+0x2e1/0x4d0 [ 247.079447] ? __pfx_schedule_timeout+0x10/0x10 [ 247.080032] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.080591] ? __pfx_process_timeout+0x10/0x10 [ 247.081163] ? __pfx_sched_set_fifo_low+0x10/0x10 [ 247.081760] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.082287] rcu_scale_writer+0x6b1/0x7f0 [ 247.082773] ? mark_held_locks+0x29/0xa0 [ 247.083252] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.083865] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.084412] kthread+0x179/0x1c0 [ 247.084759] ? __pfx_kthread+0x10/0x10 [ 247.085098] ret_from_fork+0x2c/0x50 [ 247.085433] </TASK> This commit therefore replaces schedule_timeout_uninterruptible() with schedule_timeout_idle(). | ||||
| CVE-2025-40220 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: fix livelock in synchronous file put from fuseblk workers I observed a hang when running generic/323 against a fuseblk server. This test opens a file, initiates a lot of AIO writes to that file descriptor, and closes the file descriptor before the writes complete. Unsurprisingly, the AIO exerciser threads are mostly stuck waiting for responses from the fuseblk server: # cat /proc/372265/task/372313/stack [<0>] request_wait_answer+0x1fe/0x2a0 [fuse] [<0>] __fuse_simple_request+0xd3/0x2b0 [fuse] [<0>] fuse_do_getattr+0xfc/0x1f0 [fuse] [<0>] fuse_file_read_iter+0xbe/0x1c0 [fuse] [<0>] aio_read+0x130/0x1e0 [<0>] io_submit_one+0x542/0x860 [<0>] __x64_sys_io_submit+0x98/0x1a0 [<0>] do_syscall_64+0x37/0xf0 [<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 But the /weird/ part is that the fuseblk server threads are waiting for responses from itself: # cat /proc/372210/task/372232/stack [<0>] request_wait_answer+0x1fe/0x2a0 [fuse] [<0>] __fuse_simple_request+0xd3/0x2b0 [fuse] [<0>] fuse_file_put+0x9a/0xd0 [fuse] [<0>] fuse_release+0x36/0x50 [fuse] [<0>] __fput+0xec/0x2b0 [<0>] task_work_run+0x55/0x90 [<0>] syscall_exit_to_user_mode+0xe9/0x100 [<0>] do_syscall_64+0x43/0xf0 [<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 The fuseblk server is fuse2fs so there's nothing all that exciting in the server itself. So why is the fuse server calling fuse_file_put? The commit message for the fstest sheds some light on that: "By closing the file descriptor before calling io_destroy, you pretty much guarantee that the last put on the ioctx will be done in interrupt context (during I/O completion). Aha. AIO fgets a new struct file from the fd when it queues the ioctx. The completion of the FUSE_WRITE command from userspace causes the fuse server to call the AIO completion function. The completion puts the struct file, queuing a delayed fput to the fuse server task. When the fuse server task returns to userspace, it has to run the delayed fput, which in the case of a fuseblk server, it does synchronously. Sending the FUSE_RELEASE command sychronously from fuse server threads is a bad idea because a client program can initiate enough simultaneous AIOs such that all the fuse server threads end up in delayed_fput, and now there aren't any threads left to handle the queued fuse commands. Fix this by only using asynchronous fputs when closing files, and leave a comment explaining why. | ||||
| CVE-2022-50763 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: marvell/octeontx - prevent integer overflows The "code_length" value comes from the firmware file. If your firmware is untrusted realistically there is probably very little you can do to protect yourself. Still we try to limit the damage as much as possible. Also Smatch marks any data read from the filesystem as untrusted and prints warnings if it not capped correctly. The "code_length * 2" can overflow. The round_up(ucode_size, 16) + sizeof() expression can overflow too. Prevent these overflows. | ||||
| CVE-2022-50762 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Avoid UBSAN error on true_sectors_per_clst() syzbot reported UBSAN error as below: [ 76.901829][ T6677] ================================================================================ [ 76.903908][ T6677] UBSAN: shift-out-of-bounds in fs/ntfs3/super.c:675:13 [ 76.905363][ T6677] shift exponent -247 is negative This patch avoid this error. | ||||
| CVE-2022-50760 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios() As comment of pci_get_class() says, it returns a pci_device with its refcount increased and decreased the refcount for the input parameter @from if it is not NULL. If we break the loop in amdgpu_atrm_get_bios() with 'pdev' not NULL, we need to call pci_dev_put() to decrease the refcount. Add the missing pci_dev_put() to avoid refcount leak. | ||||