| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext()
wilc_wlan_handle_isr_ext() takes the RX transfer size from the
device-reported interrupt status register (a 15-bit field shifted left by 2,
up to 131068 bytes) and reads that many bytes from the device into
rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap
check only handles the current offset; the size itself is never
compared against the buffer, so a bogus SDIO device can make the driver
OOB-write rx_buffer by up to ~32K with data it controls.
The oversized transfer also leaves rx_buffer_offset past the end of
the buffer, after which the unsigned wrap check stops working and
the overflow can repeat.
Drop any transfer whose size exceeds the RX buffer, acknowledging
the data interrupt and re-arming the RX engine so the bogus frame is
discarded and reception can continue. This also restores the
rx_buffer_offset <= WILC_RX_BUFF_SIZE invariant the wrap check
relies on.
This is not expected to change driver behavior in most cases:
without this check, an oversized transfer would most likely
corrupt neighboring kernel memory instead of completing anyway, and
the drop path performs the same interrupt acknowledgment and RX
engine re-arming as the normal path, so subsequent transfers are
received unaffected.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: Fix potential use-after-free in TX ack timer teardown
wcn36xx_dxe_deinit() tears down the TX ack timer with timer_delete(),
which only dequeues the timer and does not wait for a callback that is
already executing; the preceding free_irq() calls synchronize the
interrupt handlers only. The callback, wcn36xx_dxe_tx_timer(), can
therefore be running past the teardown and use the wcn freed along
with the ieee80211_hw in wcn36xx_remove(): it takes wcn->dxe_lock,
reads wcn->tx_ack_skb and passes wcn->hw to
ieee80211_tx_status_irqsafe().
Fix this by using timer_shutdown_sync(), which waits for a running
callback and also prevents the timer from being rearmed again. The
timer is set up again by wcn36xx_dxe_init() on the next start, so the
start/stop cycle is unaffected.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas_tf: fix UAF in lbtf_free_adapter()
lbtf_free_adapter() calls lbtf_free_cmd_buffer() to free the command
buffers before calling timer_delete_sync() to wait for the command
timer callback. If the timer callback (command_timer_fn) is already
running when lbtf_free_cmd_buffer() frees the command array, the
callback dereferences priv->cur_cmd->cmdbuf which points to freed
memory.
Swap the order so that timer_delete_sync() runs first, ensuring any
in-flight callback has completed before the command buffers are freed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlegacy: fix broadcast stations deallocation
On the error path of __il4965_up(), il_dealloc_bcast_stations() clears
only IL_STA_UCODE_ACTIVE, leaving IL_STA_BCAST set. This causes the
same broadcast stations to be deallocated again by __il4965_down().
This can occur when RF_KILL is toggled during driver startup.
To fix clear the entire 'used' field, since we will not do any
other operations on the station. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmsmac: fix UAF in brcms_free_timer()
brcms_free_timer() calls brcms_del_timer() which uses the non-synchronous
cancel_delayed_work() to cancel the timer's underlying delayed work. If
the work callback (_brcms_timer) is already running, cancel_delayed_work()
returns false without waiting, and brcms_free_timer() proceeds to kfree(t)
while the callback still accesses t through container_of().
Add an explicit cancel_delayed_work_sync() after brcms_del_timer() to
guarantee that any in-flight callback has completed before the timer
structure is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pwm-fan) Stop RPM timer before freeing tach data
sample_timer() rearms the RPM timer and accesses the devm-managed
ctx->tachs and ctx->pulses_per_revolution arrays. The cleanup action
which stops the timer is registered before those arrays are allocated.
Since devres releases entries in reverse order, driver detach can free
the arrays before pwm_fan_cleanup() shuts down the timer. A timer expiry
in that window accesses the freed tach data.
With a KASAN kernel, a test-only kprobe delayed entry to
pwm_fan_cleanup() while normal sysfs unbind ran. Each of three runs
reported three four-byte reads and two four-byte writes in sample_timer()
after its backing devm allocations had been freed. The helper did not
invoke the timer callback, cleanup actions or free functions.
With the fix, three matching unbind runs completed without KASAN, BUG,
WARNING, Oops or panic. Instrumentation confirmed that timer retirement
completed before the first timer backing allocation was released.
Split timer retirement from the power cleanup and register its devres
action after the timer backing data and IRQ actions are installed. This
preserves the early power rollback action while ensuring the timer is
retired before its backing data is released. Use timer_shutdown_sync()
because the callback can rearm itself. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: ring the doorbell if a burst ends in a drop
fbnic_tx_map() skips the doorbell write, and the completion request,
for every packet handed to it with xmit_more set, counting on the
packet which ends the burst to publish them all. When that packet is
dropped instead - skb_put_padto(), skb_cow_head() or a DMA mapping
failure - nothing rings. The descriptors of the preceding packets stay
invisible to the HW until the next transmit on that queue, which for a
burst-then-idle workload may never come.
Remember the meta descriptor of the last packet left without a doorbell
and flush it from the error paths. The completion request has to be set
on that descriptor rather than simply writing the tail, otherwise the HW
would transmit the packets but never report a head, and the ring would
fill up and stall for good.
This is very similar to Joe's recent series of fixes for bnxt.
Not seen in real life, reproduced under QEMU with failure injection. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/i2c: Disable IRQ on unbind
Currently, struct xe_i2c is freed before SGUnit IRQ is disabled in unbind
path, leaving a potential UAF in case I2C IRQ is hit during this small
window. Explicitly disable I2C IRQ in xe_i2c_remove() and fix this.
(cherry picked from commit 8ba5c8b8ab3fd362267c11df2cd5a90ee46f6e24) |
| Reliance on Obfuscation or Encryption of Security-Relevant Inputs without Integrity Checking vulnerability in danielberkompas cloak allows an attacker with write access to stored ciphertext to make it decrypt to a chosen value via bit flipping.
Cloak.Ciphers.AES.CTR encrypts with AES-256 in CTR mode and stores the key tag, the IV and the ciphertext with no MAC. decrypt/2 checks only the key tag and the minimum length before it returns the plaintext, and Cloak.Ciphers.Deprecated.AES.CTR decrypts the legacy format the same way. CTR is a stream cipher, so a value XORed into the stored ciphertext is XORed into the plaintext at the same offset. An attacker who can write to the encrypted store (for example through SQL injection or a compromised replica) and who knows or can guess a stored plaintext can replace it with any value of the same length. The application receives that value with no error.
This issue affects cloak: from 0.1.0-pre onward. |
| Use of Password Hash With Insufficient Computational Effort vulnerability in danielberkompas cloak_ecto and danielberkompas cloak allows an attacker who holds the hashed values and the configured secret to brute-force low-entropy plaintexts much faster than configured.
The dump/1 callback that Cloak.Ecto.PBKDF2 (Cloak.Fields.PBKDF2 in cloak before the Ecto code moved to cloak_ecto) injects into a field module calls :pbkdf2.pbkdf2/4 with config[:size] in the iteration-count position. The :iterations setting is validated but never used. With the cloak_ecto defaults (iterations: 600_000, size: 32) each hash runs 32 PBKDF2 rounds instead of 600,000, so offline guessing of values such as email addresses costs about 18,750 times less than configured.
This issue affects cloak_ecto: from 1.0.0-alpha.0 onward; cloak: from 0.7.0 before 1.0.0-alpha.0. |
| This vulnerability exists in the Schmooze app due to the use of hardcoded credentials and cryptographic keys in the client application. An unauthenticated remote attacker could exploit this vulnerability by decompiling the distributed application package and extracting the embedded credentials and cryptographic keys.
Successful exploitation of this vulnerability could allow the attacker to gain unauthorized access to backend and cloud resources and forge client requests on the targeted system. |
| In the WibuKey driver for Windows below Version 6.72, insufficient validation of user input when calculating the size of a kernel buffer could cause small amounts of data to be written outside the intended kernel buffer. This can lead to a system crash. Under unfavorable circumstances, adjacent kernel memory may be modified. |
| An open redirect vulnerability exists in the PingGateway Fragment Filter feature. This issue affects PingGateway versions 7.1.0 and later, 2023.2.0 through 2024.11.1, and 2025.3.0 through 2025.11.1. It is fixed in versions 2024.11.2, 2025.11.2, and 2026.3.0 (and later). |
| Insufficient verification of data authenticity (CWE-345) in the external OIDC login callback in Cloud Foundry UAA v4.5.0 to v79.6.0 (inclusive) allows an authenticated UAA user to bypass the OAuth authorization-code exchange and establish an authenticated external-OIDC browser session, via submitting a UAA access token or a cross-client ID token as the callback’s id_token parameter.
The issue only manifests when a UAA zone is configured with an OIDC identity provider whose issuer exactly matches that zone’s own /oauth/token endpoint (a “self-UAA” OIDC configuration). In this configuration, the callback takes a supplied id_token directly instead of requiring the authorization code exchange, and does not verify that the token was actually issued as an ID token for the specific self-OIDC relying-party client. An attacker holding any valid UAA JWT for themselves — including a plain access token with only uaa.user scope, or a valid ID token issued to an unrelated client such as cf — can present it as the callback’s id_token and be authenticated into a mapped local (“shadow”) account. Because the resulting session is not verified against the originating token’s true audience or user_id, its effective privilege depends entirely on the shadow account’s group memberships, which can include administrative scopes such as clients.write.
Exploitation requires a valid UAA user JWT, a valid browser login state for the target zone, and the presence of a self-referential OIDC provider configuration — this is not a pre-authentication vulnerability, and does not by itself grant privileges beyond those already held by the mapped shadow account. |
| Memory corruption while processing service requests. |
| Memory Corruption when executing system service routines due to improper handling of user input buffers. |
| SQL injection (SQLi) vulnerability in the eLoanApp application, specifically in the POST parameter 'logina' of the user process endpoint '/ajax/users.php?op=verify'. The parameter is vulnerable to boolean-based and time-based SQL injection. Successfully exploiting this vulnerability would allow an attacker to discover the platform's database engine and cause delays in database queries. |
| A vulnerability was identified in SourceCodester Simple Student Information System 1.0. This issue affects some unknown processing of the file /register.php of the component Profile Field Handler. The manipulation of the argument firstname/lastname leads to cross site scripting. The attack may be initiated remotely. The exploit is publicly available and might be used. |
| Missing Authorization vulnerability in Themekraft BuddyForms buddyforms allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects BuddyForms: from n/a through 2.10.2. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Cancel SDIO IRQ work before freeing host
A host controller that uses sdio_signal_irq() schedules host->sdio_irq_work
from its interrupt handler. That work is only cancelled on the suspend
path (mmc_sdio_suspend()), not on the remove/free path, so a worker armed
just before the controller freed its IRQ can run after
mmc_host_classdev_release() has freed the host and dereference it through
container_of().
Cancel host->sdio_irq_work in mmc_free_host(), like the existing
host->detect drain added by commit 1036f69e2513 ("mmc: core: Cancel
delayed work before releasing host").
This issue was found by an in-house static analysis tool. |
