| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Not used |
| Not used |
| Not used |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: prevent kernel bug at submit_bh_wbc()
Fix a bug where nilfs_get_block() returns a successful status when
searching and inserting the specified block both fail inconsistently. If
this inconsistent behavior is not due to a previously fixed bug, then an
unexpected race is occurring, so return a temporary error -EAGAIN instead.
This prevents callers such as __block_write_begin_int() from requesting a
read into a buffer that is not mapped, which would cause the BUG_ON check
for the BH_Mapped flag in submit_bh_wbc() to fail. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
Patch series "nilfs2: fix kernel bug at submit_bh_wbc()".
This resolves a kernel BUG reported by syzbot. Since there are two
flaws involved, I've made each one a separate patch.
The first patch alone resolves the syzbot-reported bug, but I think
both fixes should be sent to stable, so I've tagged them as such.
This patch (of 2):
Syzbot has reported a kernel bug in submit_bh_wbc() when writing file data
to a nilfs2 file system whose metadata is corrupted.
There are two flaws involved in this issue.
The first flaw is that when nilfs_get_block() locates a data block using
btree or direct mapping, if the disk address translation routine
nilfs_dat_translate() fails with internal code -ENOENT due to DAT metadata
corruption, it can be passed back to nilfs_get_block(). This causes
nilfs_get_block() to misidentify an existing block as non-existent,
causing both data block lookup and insertion to fail inconsistently.
The second flaw is that nilfs_get_block() returns a successful status in
this inconsistent state. This causes the caller __block_write_begin_int()
or others to request a read even though the buffer is not mapped,
resulting in a BUG_ON check for the BH_Mapped flag in submit_bh_wbc()
failing.
This fixes the first issue by changing the return value to code -EINVAL
when a conversion using DAT fails with code -ENOENT, avoiding the
conflicting condition that leads to the kernel bug described above. Here,
code -EINVAL indicates that metadata corruption was detected during the
block lookup, which will be properly handled as a file system error and
converted to -EIO when passing through the nilfs2 bmap layer. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().
Only compile tested. |
| In the Linux kernel, the following vulnerability has been resolved:
speakup: Avoid crash on very long word
In case a console is set up really large and contains a really long word
(> 256 characters), we have to stop before the length of the word buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: host: Fix dereference issue in DDMA completion flow.
Fixed variable dereference issue in DDMA completion flow. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: mxs-auart: add spinlock around changing cts state
The uart_handle_cts_change() function in serial_core expects the caller
to hold uport->lock. For example, I have seen the below kernel splat,
when the Bluetooth driver is loaded on an i.MX28 board.
[ 85.119255] ------------[ cut here ]------------
[ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec
[ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs
[ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1
[ 85.151396] Hardware name: Freescale MXS (Device Tree)
[ 85.156679] Workqueue: hci0 hci_power_on [bluetooth]
(...)
[ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4
[ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210
(...) |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: vmk80xx: fix incomplete endpoint checking
While vmk80xx does have endpoint checking implemented, some things
can fall through the cracks. Depending on the hardware model,
URBs can have either bulk or interrupt type, and current version
of vmk80xx_find_usb_endpoints() function does not take that fully
into account. While this warning does not seem to be too harmful,
at the very least it will crash systems with 'panic_on_warn' set on
them.
Fix the issue found by Syzkaller [1] by somewhat simplifying the
endpoint checking process with usb_find_common_endpoints() and
ensuring that only expected endpoint types are present.
This patch has not been tested on real hardware.
[1] Syzkaller report:
usb 1-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 0 PID: 781 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503
...
Call Trace:
<TASK>
usb_start_wait_urb+0x113/0x520 drivers/usb/core/message.c:59
vmk80xx_reset_device drivers/comedi/drivers/vmk80xx.c:227 [inline]
vmk80xx_auto_attach+0xa1c/0x1a40 drivers/comedi/drivers/vmk80xx.c:818
comedi_auto_config+0x238/0x380 drivers/comedi/drivers.c:1067
usb_probe_interface+0x5cd/0xb00 drivers/usb/core/driver.c:399
...
Similar issue also found by Syzkaller: |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-frontends: avoid stack overflow warnings with clang
A previous patch worked around a KASAN issue in stv0367, now a similar
problem showed up with clang:
drivers/media/dvb-frontends/stv0367.c:1222:12: error: stack frame size (3624) exceeds limit (2048) in 'stv0367ter_set_frontend' [-Werror,-Wframe-larger-than]
1214 | static int stv0367ter_set_frontend(struct dvb_frontend *fe)
Rework the stv0367_writereg() function to be simpler and mark both
register access functions as noinline_for_stack so the temporary
i2c_msg structures do not get duplicated on the stack when KASAN_STACK
is enabled. |
| AVTECH SECURITY Corporation DGM1104 FullImg-1015-1004-1006-1003 was discovered to contain an authenticated command injection vulnerability in the Machine.cgi endpoint. This vulnerability allows attackers to execute arbitrary commands via a crafted input. |
| AVTECH SECURITY Corporation DGM1104 FullImg-1015-1004-1006-1003 was discovered to contain an authenticated command injection vulnerability in the NetFailDetectD binary. This vulnerability allows attackers to execute arbitrary commands via a crafted input. |
| AVTECH SECURITY Corporation DGM1104 FullImg-1015-1004-1006-1003 was discovered to contain an authenticated command injection vulnerability in the SMB server function. This vulnerability allows attackers to execute arbitrary commands via a crafted input. |
| A weakness has been identified in H3C Magic B0 up to 100R002. This impacts the function EditWlanMacList of the file /goform/aspForm. This manipulation of the argument param causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| A denial-of-service vulnerability exists in github.com/sirupsen/logrus when using Entry.Writer() to log a single-line payload larger than 64KB without newline characters. Due to limitations in the internal bufio.Scanner, the read fails with "token too long" and the writer pipe is closed, leaving Writer() unusable and causing application unavailability (DoS). This affects versions < 1.8.3, 1.9.0, and 1.9.2. The issue is fixed in 1.8.3, 1.9.1, and 1.9.3+, where the input is chunked and the writer continues to function even if an error is logged. |
| A vulnerability has been identified in Genexis Platinum P4410 router (Firmware P4410-V2–1.41) that allows a local network attacker to achieve Remote Code Execution (RCE) with root privileges. The issue occurs due to improper session invalidation after administrator logout. When an administrator logs out, the session token remains valid. An attacker on the local network can reuse this stale token to send crafted requests via the router’s diagnostic endpoint, resulting in command execution as root. |
| This vulnerability fundamentally arises from yzcheng90 X-SpringBoot 6.0's implementation of role-based access control (RBAC) through dual dependency on frontend menu systems and backend permission tables, without enforcing atomic synchronization between these components. The critical flaw manifests when frontend menu updates (such as privilege revocation) fail to propagate to the backend permission table in real-time, creating a dangerous desynchronization. While users lose access to restricted functions through the web interface (as UI elements properly disappear), the stale permission records still validate unauthorized API requests when accessed directly through tools like Postman. Attackers exploiting this inconsistency can perform privileged operations including but not limited to: creating high-permission user accounts, accessing sensitive data beyond their clearance level, and executing admin-level commands. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto()
syzbot found a potential access to uninit-value in nf_flow_pppoe_proto()
Blamed commit forgot the Ethernet header.
BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x7e4/0x940 net/netfilter/nf_flow_table_inet.c:27
nf_flow_offload_inet_hook+0x7e4/0x940 net/netfilter/nf_flow_table_inet.c:27
nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline]
nf_hook_slow+0xe1/0x3d0 net/netfilter/core.c:623
nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline]
nf_ingress net/core/dev.c:5742 [inline]
__netif_receive_skb_core+0x4aff/0x70c0 net/core/dev.c:5837
__netif_receive_skb_one_core net/core/dev.c:5975 [inline]
__netif_receive_skb+0xcc/0xac0 net/core/dev.c:6090
netif_receive_skb_internal net/core/dev.c:6176 [inline]
netif_receive_skb+0x57/0x630 net/core/dev.c:6235
tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485
tun_get_user+0x4ee0/0x6b40 drivers/net/tun.c:1938
tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1984
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0xb4b/0x1580 fs/read_write.c:686
ksys_write fs/read_write.c:738 [inline]
__do_sys_write fs/read_write.c:749 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0. This bug triggers this warning
on a system with IOMMU enabled:
WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170
RIP: 0010:__iommu_dma_unmap+0x159/0x170
Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45
b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ff22d31181150c88 EFLAGS: 00010206
RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000
R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000
R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00
FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0
PKRU: 55555554
Call Trace:
<IRQ>
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? __iommu_dma_unmap+0x159/0x170
? report_bug+0x17e/0x1b0
? handle_bug+0x46/0x90
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? __iommu_dma_unmap+0x159/0x170
? __iommu_dma_unmap+0xb3/0x170
iommu_dma_unmap_page+0x4f/0x100
dma_unmap_page_attrs+0x52/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? xdp_return_frame+0x2e/0xd0
bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en]
__bnxt_poll_work_done+0x81/0x1e0 [bnxt_en]
bnxt_poll+0xd3/0x1e0 [bnxt_en] |
