| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue in Statping-ng v.0.91.0 allows an attacker to obtain sensitive information via a crafted request to the /api/users endpoint. |
| An issue in Statping-ng v.0.91.0 allows an attacker to obtain sensitive information via a crafted request to the Command execution function. |
| Improper limitation of a pathname to a restricted directory ('Path Traversal') vulnerability in encrypted share umount functionality in Synology Active Backup for Business before 2.7.1-13234, 2.7.1-23234 and 2.7.1-3234 allows remote authenticated users to write specific files via unspecified vectors. |
| Improper limitation of a pathname to a restricted directory ('Path Traversal') vulnerability in share file list functionality in Synology Active Backup for Business before 2.7.1-13234, 2.7.1-23234 and 2.7.1-3234 allows remote authenticated users with administrator privileges to read specific files containing non-sensitive information via unspecified vectors. |
| A vulnerability was found in JWCrypto. This flaw allows an attacker to cause a denial of service (DoS) attack and possible password brute-force and dictionary attacks to be more resource-intensive. This issue can result in a large amount of computational consumption, causing a denial of service attack. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix gmap_helper_zap_one_page() again
A few checks were missing in gmap_helper_zap_one_page(), which can lead
to memory corruption in the guest under specific circumstances.
Add the missing checks. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix memory leak in get_file_all_info()
In get_file_all_info(), if vfs_getattr() fails, the function returns
immediately without freeing the allocated filename, leading to a memory
leak.
Fix this by freeing the filename before returning in this error case. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix memory and information leak in smb3_reconfigure()
In smb3_reconfigure(), if smb3_sync_session_ctx_passwords() fails, the
function returns immediately without freeing and erasing the newly
allocated new_password and new_password2. This causes both a memory leak
and a potential information leak.
Fix this by calling kfree_sensitive() on both password buffers before
returning in this error case. |
| An out-of-bounds memory access flaw was found in the Linux kernel’s TUN/TAP device driver functionality in how a user generates a malicious (too big) networking packet when napi frags is enabled. This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: restore destructor on submit failure
handshake_req_submit() replaces sk->sk_destruct but never restores it when
submission fails before the request is hashed. handshake_sk_destruct() then
returns early and the original destructor never runs, leaking the socket.
Restore sk_destruct on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: phy: isp1301: fix non-OF device reference imbalance
A recent change fixing a device reference leak in a UDC driver
introduced a potential use-after-free in the non-OF case as the
isp1301_get_client() helper only increases the reference count for the
returned I2C device in the OF case.
Increment the reference count also for non-OF so that the caller can
decrement it unconditionally.
Note that this is inherently racy just as using the returned I2C device
is since nothing is preventing the PHY driver from being unbound while
in use. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: defer interrupt enabling until NAPI registration
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: always drop device refcount in ib_del_sub_device_and_put()
Since nldev_deldev() (introduced by commit 060c642b2ab8 ("RDMA/nldev: Add
support to add/delete a sub IB device through netlink") grabs a reference
using ib_device_get_by_index() before calling ib_del_sub_device_and_put(),
we need to drop that reference before returning -EOPNOTSUPP error. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: avoid chain re-validation if possible
Hamza Mahfooz reports cpu soft lock-ups in
nft_chain_validate():
watchdog: BUG: soft lockup - CPU#1 stuck for 27s! [iptables-nft-re:37547]
[..]
RIP: 0010:nft_chain_validate+0xcb/0x110 [nf_tables]
[..]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_table_validate+0x6b/0xb0 [nf_tables]
nf_tables_validate+0x8b/0xa0 [nf_tables]
nf_tables_commit+0x1df/0x1eb0 [nf_tables]
[..]
Currently nf_tables will traverse the entire table (chain graph), starting
from the entry points (base chains), exploring all possible paths
(chain jumps). But there are cases where we could avoid revalidation.
Consider:
1 input -> j2 -> j3
2 input -> j2 -> j3
3 input -> j1 -> j2 -> j3
Then the second rule does not need to revalidate j2, and, by extension j3,
because this was already checked during validation of the first rule.
We need to validate it only for rule 3.
This is needed because chain loop detection also ensures we do not exceed
the jump stack: Just because we know that j2 is cycle free, its last jump
might now exceed the allowed stack size. We also need to update all
reachable chains with the new largest observed call depth.
Care has to be taken to revalidate even if the chain depth won't be an
issue: chain validation also ensures that expressions are not called from
invalid base chains. For example, the masquerade expression can only be
called from NAT postrouting base chains.
Therefore we also need to keep record of the base chain context (type,
hooknum) and revalidate if the chain becomes reachable from a different
hook location. |
| URLs containing percent-encoded slashes (`/` or `\`) can trick wcurl into
saving the output file outside of the current directory without the user
explicitly asking for it.
This flaw only affects the wcurl command line tool. |
| An issue pertaining to CWE-295: Improper Certificate Validation was discovered in fofolee uTools-quickcommand 5.0.3. |
