| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: using the num_tqps in the vf driver to apply for resources
Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp
is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to
min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller
than hdev->num_tqps, which causes some hdev->htqp[i] to remain
uninitialized in hclgevf_knic_setup().
Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps,
ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent
and that all elements are properly initialized. |
| A security issue exists due to the web-based debugger agent enabled on Rockwell Automation ControlLogix® Ethernet Modules. If a specific IP address is used to connect to the WDB agent, it can allow remote attackers to perform memory dumps, modify memory, and control execution flow. |
| NVIDIA Installer for Windows contains a vulnerability where an attacker may be able to escalate privileges. A successful exploit of this vulnerability may lead to escalation of privileges, denial of service, code execution, information disclosure and data tampering. |
| NVIDIA GPU Display Driver for Windows contains a vulnerability where an attacker with local unprivileged access that can win a race condition might be able to trigger a use-after-free error. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, or information disclosure. |
| NVIDIA GPU Display Driver for Windows contains a vulnerability where an attacker may cause an exposure of sensitive system information with local unprivileged system access. A successful exploit of this vulnerability may lead to Information disclosure. |
| Lepszy BIP is vulnerable to Reflected Cross-Site Scripting (XSS). Improper input validation in index.php form in one of the parameters allows arbitrary JavaScript to be executed on victim's browser when specially crafted URL is opened.
The vendor was contacted early about this disclosure but did not respond in any way. Potentially all versions are vulnerable. |
| A security issue exists within the 5032 16pt Digital Configurable module’s web server. The web server’s session number increments at an interval that correlates to the last two consecutive sign in session interval, making it predictable. |
| A security issues exists within Studio 5000 Logix Designer due to unsafe handling of environment variables. If the specified path lacks a valid file, Logix Designer crashes; However, it may be possible to execute malicious code without triggering a crash. |
| PostgreSQL optimizer statistics allow a user to read sampled data within a view that the user cannot access. Separately, statistics allow a user to read sampled data that a row security policy intended to hide. PostgreSQL maintains statistics for tables by sampling data available in columns; this data is consulted during the query planning process. Prior to this release, a user could craft a leaky operator that bypassed view access control lists (ACLs) and bypassed row security policies in partitioning or table inheritance hierarchies. Reachable statistics data notably included histograms and most-common-values lists. CVE-2017-7484 and CVE-2019-10130 intended to close this class of vulnerability, but this gap remained. Versions before PostgreSQL 17.6, 16.10, 15.14, 14.19, and 13.22 are affected. |
| Untrusted data inclusion in pg_dump in PostgreSQL allows a malicious superuser of the origin server to inject arbitrary code for restore-time execution as the client operating system account running psql to restore the dump, via psql meta-commands. pg_dumpall is also affected. pg_restore is affected when used to generate a plain-format dump. This is similar to MySQL CVE-2024-21096. Versions before PostgreSQL 17.6, 16.10, 15.14, 14.19, and 13.22 are affected. |
| Improper neutralization of newlines in pg_dump in PostgreSQL allows a user of the origin server to inject arbitrary code for restore-time execution as the client operating system account running psql to restore the dump, via psql meta-commands inside a purpose-crafted object name. The same attacks can achieve SQL injection as a superuser of the restore target server. pg_dumpall, pg_restore, and pg_upgrade are also affected. Versions before PostgreSQL 17.6, 16.10, 15.14, 14.19, and 13.22 are affected. Versions before 11.20 are unaffected. CVE-2012-0868 had fixed this class of problem, but version 11.20 reintroduced it. |
| A flaw was found in ActiveMQ Artemis. The password generated by activemq-artemis-operator does not regenerate between separated CR dependencies. |
| httpTokenCacheKey uses path.Base to extract the expected HTTP-01 token value to lookup in the DirCache implementation. On Windows, path.Base acts differently to filepath.Base, since Windows uses a different path separator (\ vs. /), allowing a user to provide a relative path, i.e. .well-known/acme-challenge/..\..\asd becomes ..\..\asd. The extracted path is then suffixed with +http-01, joined with the cache directory, and opened. Since the controlled path is suffixed with +http-01 before opening, the impact of this is significantly limited, since it only allows reading arbitrary files on the system if and only if they have this suffix. |
| Stack-based buffer overflow vulnerability in the 'conn-indicator' binary running as root on the TP-Link Archer AX50 router, in firmware versions prior to 1.0.15 build 241203 rel61480. This vulnerability allows an attacker to execute arbitrary code on the device over LAN and WAN networks. |
| VictoriaMetrics is a scalable solution for monitoring and managing time series data. In versions from 1.0.0 to before 1.110.23, from 1.111.0 to before 1.122.8, and from 1.123.0 to before 1.129.1, affected versions are vulnerable to DoS attacks because the snappy decoder ignored VictoriaMetrics request size limits allowing malformed blocks to trigger excessive memory use. This could lead to OOM errors and service instability. The fix enforces block-size checks based on MaxRequest limits. This issue has been patched in versions 1.110.23, 1.122.8, and 1.129.1. |
| The devices do not implement any authentication for the web interface or the MQTT server. An attacker who has network access to the device immediately gets administrative access to the devices and can perform arbitrary administrative actions and reconfigure the devices or potentially gain access to sensitive data. |
| In ESPEC North America Web Controller 3 before 3.3.4, /api/v4/auth/ with any invalid authentication request results in exposing a JWT secret. This allows for elevated permissions to the UI. |
| The Structured Content (JSON-LD) #wpsc WordPress plugin before 1.7.0 does not validate and escape some of its block options before outputting them back in a page/post where the block is embed, which could allow users with the contributor role and above to perform Stored Cross-Site Scripting attacks. |
| Inside Track / Entropy Derby is a research-grade horse-racing betting engine. Prior to commit 2d38d2f, the VDF-based timelock encryption system fails to enforce sequential delay against the betting operator. Bettors pre-compute the entire Wesolowski VDF and include vdfOutputHex in their encrypted bet ticket, allowing the house to decrypt immediately using fast proof verification instead of expensive VDF evaluation. This issue has been patched via commit 2d38d2f. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid0, raid10: Don't set discard sectors for request queue
It should use disk_stack_limits to get a proper max_discard_sectors
rather than setting a value by stack drivers.
And there is a bug. If all member disks are rotational devices,
raid0/raid10 set max_discard_sectors. So the member devices are
not ssd/nvme, but raid0/raid10 export the wrong value. It reports
warning messages in function __blkdev_issue_discard when mkfs.xfs
like this:
[ 4616.022599] ------------[ cut here ]------------
[ 4616.027779] WARNING: CPU: 4 PID: 99634 at block/blk-lib.c:50 __blkdev_issue_discard+0x16a/0x1a0
[ 4616.140663] RIP: 0010:__blkdev_issue_discard+0x16a/0x1a0
[ 4616.146601] Code: 24 4c 89 20 31 c0 e9 fe fe ff ff c1 e8 09 8d 48 ff 4c 89 f0 4c 09 e8 48 85 c1 0f 84 55 ff ff ff b8 ea ff ff ff e9 df fe ff ff <0f> 0b 48 8d 74 24 08 e8 ea d6 00 00 48 c7 c6 20 1e 89 ab 48 c7 c7
[ 4616.167567] RSP: 0018:ffffaab88cbffca8 EFLAGS: 00010246
[ 4616.173406] RAX: ffff9ba1f9e44678 RBX: 0000000000000000 RCX: ffff9ba1c9792080
[ 4616.181376] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ba1c9792080
[ 4616.189345] RBP: 0000000000000cc0 R08: ffffaab88cbffd10 R09: 0000000000000000
[ 4616.197317] R10: 0000000000000012 R11: 0000000000000000 R12: 0000000000000000
[ 4616.205288] R13: 0000000000400000 R14: 0000000000000cc0 R15: ffff9ba1c9792080
[ 4616.213259] FS: 00007f9a5534e980(0000) GS:ffff9ba1b7c80000(0000) knlGS:0000000000000000
[ 4616.222298] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4616.228719] CR2: 000055a390a4c518 CR3: 0000000123e40006 CR4: 00000000001706e0
[ 4616.236689] Call Trace:
[ 4616.239428] blkdev_issue_discard+0x52/0xb0
[ 4616.244108] blkdev_common_ioctl+0x43c/0xa00
[ 4616.248883] blkdev_ioctl+0x116/0x280
[ 4616.252977] __x64_sys_ioctl+0x8a/0xc0
[ 4616.257163] do_syscall_64+0x5c/0x90
[ 4616.261164] ? handle_mm_fault+0xc5/0x2a0
[ 4616.265652] ? do_user_addr_fault+0x1d8/0x690
[ 4616.270527] ? do_syscall_64+0x69/0x90
[ 4616.274717] ? exc_page_fault+0x62/0x150
[ 4616.279097] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 4616.284748] RIP: 0033:0x7f9a55398c6b |
