| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crash: fix crashkernel resource shrink
When crashkernel is configured with a high reservation, shrinking its
value below the low crashkernel reservation causes two issues:
1. Invalid crashkernel resource objects
2. Kernel crash if crashkernel shrinking is done twice
For example, with crashkernel=200M,high, the kernel reserves 200MB of high
memory and some default low memory (say 256MB). The reservation appears
as:
cat /proc/iomem | grep -i crash
af000000-beffffff : Crash kernel
433000000-43f7fffff : Crash kernel
If crashkernel is then shrunk to 50MB (echo 52428800 >
/sys/kernel/kexec_crash_size), /proc/iomem still shows 256MB reserved:
af000000-beffffff : Crash kernel
Instead, it should show 50MB:
af000000-b21fffff : Crash kernel
Further shrinking crashkernel to 40MB causes a kernel crash with the
following trace (x86):
BUG: kernel NULL pointer dereference, address: 0000000000000038
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
<snip...>
Call Trace: <TASK>
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15a/0x2f0
? search_module_extables+0x19/0x60
? search_bpf_extables+0x5f/0x80
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? __release_resource+0xd/0xb0
release_resource+0x26/0x40
__crash_shrink_memory+0xe5/0x110
crash_shrink_memory+0x12a/0x190
kexec_crash_size_store+0x41/0x80
kernfs_fop_write_iter+0x141/0x1f0
vfs_write+0x294/0x460
ksys_write+0x6d/0xf0
<snip...>
This happens because __crash_shrink_memory()/kernel/crash_core.c
incorrectly updates the crashk_res resource object even when
crashk_low_res should be updated.
Fix this by ensuring the correct crashkernel resource object is updated
when shrinking crashkernel memory. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Add bpf_prog_run_data_pointers()
syzbot found that cls_bpf_classify() is able to change
tc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop().
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline]
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214
struct tc_skb_cb has been added in commit ec624fe740b4 ("net/sched:
Extend qdisc control block with tc control block"), which added a wrong
interaction with db58ba459202 ("bpf: wire in data and data_end for
cls_act_bpf").
drop_reason was added later.
Add bpf_prog_run_data_pointers() helper to save/restore the net_sched
storage colliding with BPF data_meta/data_end. |
| Incorrect Default Permissions vulnerability in Centreon Infra Monitoring (MBI modules) allows Embedding Scripts within Scripts by CentreonBI user account on the MBI server This issue affects Infra Monitoring: from 24.10.0 before 24.10.6, from 24.04.0 before 24.04.9, from 23.10.0 before 23.10.15. |
| @fastify/multipart is a Fastify plugin for parsing the multipart content-type. Prior to versions 8.3.1 and 9.0.3, the `saveRequestFiles` function does not delete the uploaded temporary files when user cancels the request. The issue is fixed in versions 8.3.1 and 9.0.3. As a workaround, do not use `saveRequestFiles`. |
| Arbitrary file overwrite during home directory recovery due to improper symbolic link handling. The following products are affected: Acronis Backup plugin for cPanel & WHM (Linux) before build 1.8.4.866, Acronis Backup plugin for cPanel & WHM (Linux) before build 1.9.1.892, Acronis Backup extension for Plesk (Linux) before build 1.8.7.615. |
| An issue in Qianjin Network Information Technology (Shanghai) Co., Ltd 51Job iOS 14.22.0 allows attackers to access sensitive user information via supplying a crafted link. |
| An issue in Yibin Fengguan Network Technology Co., Ltd YuPao DirectHire iOS 8.8.0 allows attackers to access sensitive user information via supplying a crafted link. |
| The WP Crontrol plugin for WordPress is vulnerable to blind Server-Side Request Forgery in versions 1.17.0 to 1.19.1 via the 'wp_remote_request' function. This makes it possible for authenticated attackers, with Administrator-level access and above, to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. |
| Telenium Online Web Application is vulnerable due to a Perl script that
is called to load the login page. Due to improper input validation, an
attacker can inject arbitrary Perl code through a crafted HTTP request,
leading to remote code execution on the server. |
| Uncontrolled Resource Consumption vulnerability in Legion of the Bouncy Castle Inc. Bouncy Castle for Java FIPS bc-fips on All (API modules), Legion of the Bouncy Castle Inc. Bouncy Castle for Java LTS bcprov-lts8on on All (API modules) allows Excessive Allocation. This vulnerability is associated with program files org/bouncycastle/crypto/fips/AESNativeCBC.Java, org/bouncycastle/crypto/engines/AESNativeCBC.Java.
This issue affects Bouncy Castle for Java FIPS: 2.1.0; Bouncy Castle for Java LTS: from 2.73.0 through 2.73.7. |
| In the Linux kernel, the following vulnerability has been resolved:
mlx5: Fix default values in create CQ
Currently, CQs without a completion function are assigned the
mlx5_add_cq_to_tasklet function by default. This is problematic since
only user CQs created through the mlx5_ib driver are intended to use
this function.
Additionally, all CQs that will use doorbells instead of polling for
completions must call mlx5_cq_arm. However, the default CQ creation flow
leaves a valid value in the CQ's arm_db field, allowing FW to send
interrupts to polling-only CQs in certain corner cases.
These two factors would allow a polling-only kernel CQ to be triggered
by an EQ interrupt and call a completion function intended only for user
CQs, causing a null pointer exception.
Some areas in the driver have prevented this issue with one-off fixes
but did not address the root cause.
This patch fixes the described issue by adding defaults to the create CQ
flow. It adds a default dummy completion function to protect against
null pointer exceptions, and it sets an invalid command sequence number
by default in kernel CQs to prevent the FW from sending an interrupt to
the CQ until it is armed. User CQs are responsible for their own
initialization values.
Callers of mlx5_core_create_cq are responsible for changing the
completion function and arming the CQ per their needs. |
| Seeyon Zhiyuan OA Web Application System versions up to and including 7.0 SP1 improperly decode and parse the `enc` parameter in thirdpartyController.do. The decoded map values can influence session attributes without sufficient authentication/authorization checks, enabling attackers to assign a session to arbitrary user IDs. VulnCheck has observed this vulnerability being exploited in the wild as of 2025-10-30 at 00:30:40.855917 UTC. |
| TalkTalk 3.3.6 Android App contains improper access control vulnerabilities in multiple API endpoints. By modifying request parameters, attackers may obtain sensitive user information (such as device identifiers and birthdays) and access private group information, including join credentials. Successful exploitation may result in privacy breaches and unauthorized access to restricted resources. |
| Senza: Keto & Fasting Android App version 2.10.15 (package name com.gl.senza), developed by Paul Itoi, contains an improper access control vulnerability. By exploiting insufficient checks in user data API endpoints, attackers can obtain authentication tokens and perform account takeover. Successful exploitation could result in unauthorized account access, privacy breaches, and misuse of the platform. |
| On affected platforms running Arista EOS, maliciously formed UDP packets with source port 3503 may be accepted by EOS. UDP Port 3503 is associated with LspPing Echo Reply. This can result in unexpected behaviors, especially for UDP based services that do not perform some form of authentication. |
| A flaw was found in the Keycloak package. This flaw allows an attacker to utilize an LDAP injection to bypass the username lookup or potentially perform other malicious actions. |
| A remote code execution vulnerability exists in Kaltura versions prior to 11.1.0-2 due to unsafe deserialization of user-controlled data within the keditorservices module. An unauthenticated remote attacker can exploit this issue by sending a specially crafted serialized PHP object in the kdata GET parameter to the redirectWidgetCmd endpoint. Successful exploitation leads to execution of arbitrary PHP code in the context of the web server process. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix possible vport_config NULL pointer deref in remove
Attempting to remove the driver will cause a crash in cases where
the vport failed to initialize. Following trace is from an instance where
the driver failed during an attempt to create a VF:
[ 1661.543624] idpf 0000:84:00.7: Device HW Reset initiated
[ 1722.923726] idpf 0000:84:00.7: Transaction timed-out (op:1 cookie:2900 vc_op:1 salt:29 timeout:60000ms)
[ 1723.353263] BUG: kernel NULL pointer dereference, address: 0000000000000028
...
[ 1723.358472] RIP: 0010:idpf_remove+0x11c/0x200 [idpf]
...
[ 1723.364973] Call Trace:
[ 1723.365475] <TASK>
[ 1723.365972] pci_device_remove+0x42/0xb0
[ 1723.366481] device_release_driver_internal+0x1a9/0x210
[ 1723.366987] pci_stop_bus_device+0x6d/0x90
[ 1723.367488] pci_stop_and_remove_bus_device+0x12/0x20
[ 1723.367971] pci_iov_remove_virtfn+0xbd/0x120
[ 1723.368309] sriov_disable+0x34/0xe0
[ 1723.368643] idpf_sriov_configure+0x58/0x140 [idpf]
[ 1723.368982] sriov_numvfs_store+0xda/0x1c0
Avoid the NULL pointer dereference by adding NULL pointer check for
vport_config[i], before freeing user_config.q_coalesce. |
| An issue was discovered in Malwarebytes 4.6.14.326 and before 5.1.5.116 (and Nebula 2020-10-21 and later). A Stack buffer out-of-bounds access exists because of an integer underflow when handling newline characters. |
| Due to improper authentication mechanism an unauthenticated remote attacker can enumerate valid usernames. |
