| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ELAN reported a potential out-of-bounds write vulnerability in the ELAN TrackPoint driver that, under certain circumstances, could allow a local authenticated user to cause a system crash. |
| Subscriber Sensitive Data Exposure in WPJAM Basic <= 7.0.2.1 versions. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information due to an out-of-bounds read. |
| The Intel ALH digital-audio-interface driver function dai_alh_get_properties() in drivers/dai/intel/alh/alh.c used a caller-supplied int stream_id with no range validation. The value indexes the fixed-size static const uint8_t alh_handshake_map[64] array and scales a FIFO register address, so an out-of-range stream_id produces an out-of-bounds read of one byte at an attacker-chosen signed offset from the array. That byte is written into prop->dma_hs_id and the resulting struct dai_properties is copied back to the caller, leaking it.
dai_get_properties_copy() is a Zephyr __syscall, and its verifier z_vrfy_dai_get_properties_copy() (drivers/dai/dai_handlers.c) validates only the device-object permission and the destination buffer, not stream_id. A user-mode thread that has been granted access to the ALH DAI device object can therefore call the syscall with an arbitrary stream_id, crossing the userspace/kernel sandbox boundary.
The impact is a one-byte-per-call arbitrary-offset kernel information disclosure (and leakage of a computed kernel address via fifo_address); a stream_id that resolves to an unmapped page faults in kernel context, giving a local denial of service. Exploitation requires CONFIG_USERSPACE and device access, making this a local, moderate-severity issue. The fix rejects negative and too-large stream_id values up front and returns NULL, which the copy wrapper maps to -ENOENT. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to execute code locally. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information over a network. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information over a network. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
kho: skip KHO for crash kernel
kho_fill_kimage() unconditionally populates the kimage with KHO
metadata for every kexec image type. When the image is a crash kernel,
this can be problematic as the crash kernel can run in a small reserved
region and the KHO scratch areas can sit outside it.
The crash kernel then faults during kho_memory_init() when it
tries phys_to_virt() on the KHO FDT address:
Unable to handle kernel paging request at virtual address xxxxxxxx
...
fdt_offset_ptr+...
fdt_check_node_offset_+...
fdt_first_property_offset+...
fdt_get_property_namelen_+...
fdt_getprop+...
kho_memory_init+...
mm_core_init+...
start_kernel+...
kho_locate_mem_hole() already skips KHO logic for KEXEC_TYPE_CRASH
images, but kho_fill_kimage() was missing the same guard. As
kho_fill_kimage() is the single point that populates image->kho.fdt
and image->kho.scratch, fixing it here is sufficient for both arm64
and x86 as the FDT and boot_params path are bailing out when these
fields are unset. |
| libexpat before 2.8.3 has an out-of-bounds read and resultant infinite loop because low surrogates are treated the same as high surrogates during Unicode processing in the *_toUtf16 functions. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Bound used_lrs when flushing the pKVM hyp vCPU
flush_hyp_vcpu() copies the host vGIC state into the hyp's private vCPU
on every run. The vGIC list register save and restore use used_lrs as
their loop bound and expect it to stay within the number of implemented
list registers. While this is generally the case, flush_hyp_vcpu()
copies vgic_v3 verbatim and does not enforce this, so a value provided
by the host is used at EL2 to index vgic_lr[] and access ICH_LR<n>_EL2
(host -> EL2).
Fix by clamping used_lrs to the number of implemented list registers
after the copy, as the trusted path already does in
vgic_flush_lr_state(). The number of implemented list registers is
constant after init, so it is replicated once from
kvm_vgic_global_state.nr_lr into hyp_gicv3_nr_lr rather than read on
every entry. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ifb: report ethtool stats over num_tx_queues
ifb_dev_init() allocates dp->tx_private to dev->num_tx_queues
entries via kzalloc_objs(*txp, dev->num_tx_queues). Both IFB
per-queue RX and TX stats live in those entries: ifb_xmit() updates
txp->rx_stats using the skb queue mapping, ifb_ri_tasklet() updates
txp->tx_stats, and ifb_stats64() aggregates both over
dev->num_tx_queues.
The ethtool stats callbacks instead size and walk the per-queue
stats with dev->real_num_rx_queues and dev->real_num_tx_queues. With
an asymmetric device where the RX queue count exceeds the TX queue
count, for example:
ip link add name ifb10 numtxqueues 1 numrxqueues 8 type ifb
ethtool -S ifb10
ifb_get_ethtool_stats() indexes past the tx_private allocation and
copies adjacent slab data through ETHTOOL_GSTATS.
Use dev->num_tx_queues consistently for the stats strings, the
stats count, and the stats data walks. This reports one RX stats
group and one TX stats group for each backing ifb_q_private entry,
which is the queue set IFB can actually populate.
Reproduced under UML+KASAN at v7.1-rc2:
BUG: KASAN: slab-out-of-bounds in ifb_fill_stats_data+0x3c/0xae
Read of size 8 at addr 0000000062dbd228 by task ethtool/36
ifb_fill_stats_data+0x3c/0xae
ifb_get_ethtool_stats+0xc0/0x129
__dev_ethtool+0x1ca5/0x363c
dev_ethtool+0x123/0x1b3
dev_ioctl+0x56c/0x744
sock_do_ioctl+0x15f/0x1b2
sock_ioctl+0x4d5/0x50a
sys_ioctl+0xd8b/0xde9
With the patch applied, the same UML+KASAN repro is silent and
ethtool -S ifb10 reports only the stats backed by the single
allocated tx_private entry. |
| In the Linux kernel, the following vulnerability has been resolved:
net: devmem: reject dma-buf bind with non-page-aligned size or SG length
net_devmem_bind_dmabuf() trusts dmabuf->size and sg_dma_len() to be
PAGE_SIZE multiples without checking:
- tx_vec is sized dmabuf->size / PAGE_SIZE, and
net_devmem_get_niov_at() only bounds-checks virt_addr < dmabuf->size
before indexing tx_vec[virt_addr / PAGE_SIZE]. With size =
N*PAGE_SIZE + r (1 <= r < PAGE_SIZE), sendmsg() at iov_base =
N*PAGE_SIZE passes the bound check and reads tx_vec[N] -- one past.
- owner->area.num_niovs = len / PAGE_SIZE while gen_pool_add_owner()
covers the full byte len, so a non-page-multiple non-final sg
desyncs num_niovs from the gen_pool region for every later sg, on
both RX and TX.
dma-buf does not require page-aligned sizes, so the bind path has to
enforce what its own indexing assumes. Reject both with -EINVAL.
The size check is TX-only (only tx_vec is sized off dmabuf->size); the
SG-length check covers both directions. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate Add Extended Advertising Data length
MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command,
with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler
then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy
cp->data, but it never checks that those bytes are part of the mgmt
command payload.
A short command can therefore make add_ext_adv_data() pass an
out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond
the command buffer are addressable, they can also be copied into the
advertising instance as scan response data, where the caller can read
them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires
CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte
slab-out-of-bounds read.
Reject commands whose length does not match the fixed header plus both
advertising data lengths before parsing cp->data. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: asihpi: Fix potential OOB array access at reading cache
find_control() to retrieve a cached info accesses the array with the
given index blindly, which may lead to an OOB array access.
Add a sanity check for avoiding it. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison
The local-vs-remote region comparison loop uses '<=' instead of '<',
causing it to read one entry past the valid range of qr_regions. The
other loops in the same function correctly use '<'.
Fix the loop condition to use '<' for consistency and correctness. |
| In the Linux kernel, the following vulnerability has been resolved:
netlabel: validate unlabeled address and mask attribute lengths
netlbl_unlabel_addrinfo_get() used the address attribute length to
determine whether the attribute data could be read as an IPv4 or IPv6
address, but did not independently validate the corresponding mask
attribute length. A crafted Generic Netlink request could therefore
provide a valid IPv4/IPv6 address attribute with a shorter mask
attribute, which would later be read as a full struct in_addr or
struct in6_addr.
NLA_BINARY policy lengths are maximum lengths by default, so use
NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask
attributes. This rejects short attributes during policy validation and
also exposes the exact length requirements through policy introspection. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: reject short frames before parsing
A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the
packet type byte immediately and, for control packets, reads the control
opcode and setup UUID-size byte before proving that those bytes are
present. bnep_rx_control() also dereferences the control opcode without
rejecting an empty control payload.
Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL
return gates each dereference. Split the control handler so the frame
path can pass an opcode that has already been pulled, and keep the
byte-buffer wrapper for extension control payloads.
For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the
setup payload. struct bnep_setup_conn_req carries destination and source
service UUIDs after that byte, each uuid_size bytes, so the parser now
documents that tuple explicitly instead of leaving the pull length as an
opaque multiplication.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790
The buggy address belongs to the object at ffff88800c0f7908 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 1-byte
region [ffff88800c0f7908, ffff88800c0f7909)
Read of size 1
Call trace:
dump_stack_lvl+0xb3/0x140 (?:?)
print_address_description+0x57/0x3a0 (?:?)
bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306)
print_report+0xb9/0x2b0 (?:?)
__virt_addr_valid+0x1ba/0x3a0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
kasan_addr_to_slab+0x21/0x60 (?:?)
kasan_report+0xe0/0x110 (?:?)
process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200)
worker_thread+0x65c/0xe40 (?:?)
__kthread_parkme+0x184/0x230 (?:?)
kthread+0x35e/0x470 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
ret_from_fork+0x586/0x870 (?:?)
__switch_to+0x74f/0xdc0 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?) |
