| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The software does not neutralize or incorrectly neutralizes certain characters before the data is included in outgoing HTTP headers. The inclusion of invalidated data in an HTTP header allows an attacker to specify the full HTTP response represented by the browser. An attacker could control the response and craft attacks such as cross-site scripting and cache poisoning attacks. |
| The Coming Soon, Under Construction & Maintenance Mode By Dazzler plugin for WordPress is vulnerable to maintenance mode bypass in all versions up to, and including, 2.1.2. This is due to the plugin relying on the REQUEST_URI to determine if the page being accesses is an admin area. This makes it possible for unauthenticated attackers to bypass maintenance mode and access the site which may be considered confidential when in maintenance mode. |
| Previous versions of HP ThinPro (prior to HP ThinPro 8.0 SP 8) could potentially contain security vulnerabilities. HP has released HP ThinPro 8.0 SP 8, which includes updates to mitigate potential vulnerabilities. |
| The Image Hover Effects – Elementor Addon plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's Image Hover Effects Widget in all versions up to, and including, 1.4.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers with contributor-level and above permissions to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The FTL Server component of TIBCO Software Inc.'s TIBCO FTL - Enterprise Edition contains a vulnerability that allows a low privileged attacker with network access to execute a privilege escalation on the affected ftlserver. Affected releases are TIBCO Software Inc.'s TIBCO FTL - Enterprise Edition: versions 6.10.1 and below.
|
| SCRAM (Salted Challenge Response Authentication Mechanism) is part of the family of Simple Authentication and Security Layer (SASL, RFC 4422) authentication mechanisms. Prior to version 3.2, a timing attack vulnerability exists in the SCRAM Java implementation. The issue arises because Arrays.equals was used to compare secret values such as client proofs and server signatures. Since Arrays.equals performs a short-circuit comparison, the execution time varies depending on how many leading bytes match. This behavior could allow an attacker to perform a timing side-channel attack and potentially infer sensitive authentication material. All users relying on SCRAM authentication are impacted. This vulnerability has been patched in version 3.1 by replacing Arrays.equals with MessageDigest.isEqual, which ensures constant-time comparison. |
| A multi-vendor cache poisoning vulnerability named 'Rebirthday Attack' has been discovered in caching resolvers that support EDNS Client Subnet (ECS). Unbound is also vulnerable when compiled with ECS support, i.e., '--enable-subnet', AND configured to send ECS information along with queries to upstream name servers, i.e., at least one of the 'send-client-subnet', 'client-subnet-zone' or 'client-subnet-always-forward' options is used. Resolvers supporting ECS need to segregate outgoing queries to accommodate for different outgoing ECS information. This re-opens up resolvers to a birthday paradox attack (Rebirthday Attack) that tries to match the DNS transaction ID in order to cache non-ECS poisonous replies. |
| Happy DOM is a JavaScript implementation of a web browser without its graphical user interface. Happy DOM v19 and lower contains a security vulnerability that puts the owner system at the risk of RCE (Remote Code Execution) attacks. A Node.js VM Context is not an isolated environment, and if the user runs untrusted JavaScript code within the Happy DOM VM Context, it may escape the VM and get access to process level functionality. It seems like what the attacker can get control over depends on if the process is using ESM or CommonJS. With CommonJS the attacker can get hold of the `require()` function to import modules. Happy DOM has JavaScript evaluation enabled by default. This may not be obvious to the consumer of Happy DOM and can potentially put the user at risk if untrusted code is executed within the environment. Version 20.0.0 patches the issue by changing JavaScript evaluation to be disabled by default. |
| In versions before 20.0.2, it was found that --disallow-code-generation-from-strings is not sufficient for isolating untrusted JavaScript in happy-dom. The untrusted script and the rest of the application still run in the same Isolate/process, so attackers can deploy prototype pollution payloads to hijack important references like "process" in the example below, or to hijack control flow via flipping checks of undefined property. This vulnerability is due to an incomplete fix for CVE-2025-61927. The vulnerability is fixed in 20.0.2. |
| mailgen is a Node.js package that generates responsive HTML e-mails for sending transactional mail. Mailgen versions through 2.0.31 contain an HTML injection vulnerability in plaintext emails generated with the generatePlaintext method when user generated content is supplied. The plaintext generation code attempts to strip HTML tags using a regular expression and then decodes HTML entities, but tags that include certain Unicode line separator characters are not matched and removed. These encoded tags are later decoded into valid HTML content, allowing unexpected HTML to remain in output intended to be plaintext. Projects are affected if they call Mailgen.generatePlaintext with untrusted input and then render or otherwise process the returned string in a context where HTML is interpreted. This can lead to execution of attacker supplied script in the victim’s browser. Version 2.0.32 fixes the issue. |
| PrivateBin is an online pastebin where the server has zero knowledge of pasted data. Versions 1.7.7 through 2.0.1 allow persistent HTML injection via the unsanitized attachment filename (attachment_name) when attachments are enabled. An attacker can modify attachment_name before encryption so that, after decryption, arbitrary HTML is inserted unescaped into the page near the file size hint, enabling redirect (e.g., meta refresh) and site defacement and related phishing attacks. Script execution is normally blocked by the recommended Content Security Policy, limiting confidentiality impact. The issue was introduced in 1.7.7 and fixed in 2.0.2. Update to 2.0.2 or later. Workarounds include enforcing the recommended CSP, deploying PrivateBin on a separate domain, or disabling attachments. |
| In FRRouting (FRR) before 10.3 from 6.0 onward, all routes are re-validated if the total size of an update received via RTR exceeds the internal socket's buffer size, default 4K on most OSes. An attacker can use this to trigger re-parsing of the RIB for FRR routers using RTR by causing more than this number of updates during an update interval (usually 30 minutes). Additionally, this effect regularly occurs organically. Furthermore, an attacker can use this to trigger route validation continuously. Given that routers with large full tables may need more than 30 minutes to fully re-validate the table, continuous issuance/withdrawal of large numbers of ROA may be used to impact the route handling performance of all FRR instances using RPKI globally. Additionally, the re-validation will cause heightened BMP traffic to ingestors. Fixed Versions: 10.0.3, 10.1.2, 10.2.1, >= 10.3. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix scx_enable() crash on helper kthread creation failure
A crash was observed when the sched_ext selftests runner was
terminated with Ctrl+\ while test 15 was running:
NIP [c00000000028fa58] scx_enable.constprop.0+0x358/0x12b0
LR [c00000000028fa2c] scx_enable.constprop.0+0x32c/0x12b0
Call Trace:
scx_enable.constprop.0+0x32c/0x12b0 (unreliable)
bpf_struct_ops_link_create+0x18c/0x22c
__sys_bpf+0x23f8/0x3044
sys_bpf+0x2c/0x6c
system_call_exception+0x124/0x320
system_call_vectored_common+0x15c/0x2ec
kthread_run_worker() returns an ERR_PTR() on failure rather than NULL,
but the current code in scx_alloc_and_add_sched() only checks for a NULL
helper. Incase of failure on SIGQUIT, the error is not handled in
scx_alloc_and_add_sched() and scx_enable() ends up dereferencing an
error pointer.
Error handling is fixed in scx_alloc_and_add_sched() to propagate
PTR_ERR() into ret, so that scx_enable() jumps to the existing error
path, avoiding random dereference on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added
In commit b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x"), I
missed the case where state creation fails between full
initialization (->init_state has been called) and being inserted on
the lists.
In this situation, ->init_state has been called, so for IPcomp
tunnels, the fallback tunnel has been created and added onto the
lists, but the user state never gets added, because we fail before
that. The user state doesn't go through __xfrm_state_delete, so we
don't call xfrm_state_delete_tunnel for those states, and we end up
leaking the FB tunnel.
There are several codepaths affected by this: the add/update paths, in
both net/key and xfrm, and the migrate code (xfrm_migrate,
xfrm_state_migrate). A "proper" rollback of the init_state work would
probably be doable in the add/update code, but for migrate it gets
more complicated as multiple states may be involved.
At some point, the new (not-inserted) state will be destroyed, so call
xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states
will have their fallback tunnel cleaned up during __xfrm_state_delete,
which solves the issue that b441cf3f8c4b (and other patches before it)
aimed at. All states (including FB tunnels) will be removed from the
lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work). |
| A vulnerability classified as critical has been found in Shanghai Bairui Information Technology SunloginClient 15.8.3.19819. This affects an unknown part in the library process.dll of the file sunlogin_guard.exe. The manipulation leads to uncontrolled search path. Local access is required to approach this attack. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| pyquokka is a framework for making data lakes work for time series. In versions 0.3.1 and prior, the FlightServer class directly uses pickle.loads() to deserialize action bodies received from Flight clients without any sanitization or validation in the do_action() method. The vulnerable code is located in pyquokka/flight.py at line 283 where arbitrary data from Flight clients is directly passed to pickle.loads(). When FlightServer is configured to listen on 0.0.0.0, this allows attackers across the entire network to perform arbitrary remote code execution by sending malicious pickled payloads through the set_configs action. Additional vulnerability points exist in the cache_garbage_collect, do_put, and do_get functions where pickle.loads is used to deserialize untrusted remote data. |
| A high-severity vulnerability that can lead to arbitrary code execution on the system hosting the Web SDK role was found in the Genetec Security Center product line. |
| Bible Module is a tool designed for ROBLOX developers to integrate Bible functionality into their games. The `FetchVerse` and `FetchPassage` functions in the Bible Module are susceptible to injection attacks due to the absence of input validation. This vulnerability could allow an attacker to manipulate the API request URLs, potentially leading to unauthorized access or data tampering. This issue has been addressed in version 0.0.3. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom-qusb2: Fix NULL pointer dereference on early suspend
Enabling runtime PM before attaching the QPHY instance as driver data
can lead to a NULL pointer dereference in runtime PM callbacks that
expect valid driver data. There is a small window where the suspend
callback may run after PM runtime enabling and before runtime forbid.
This causes a sporadic crash during boot:
```
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a1
[...]
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.7+ #116 PREEMPT
Workqueue: pm pm_runtime_work
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : qusb2_phy_runtime_suspend+0x14/0x1e0 [phy_qcom_qusb2]
lr : pm_generic_runtime_suspend+0x2c/0x44
[...]
```
Attach the QPHY instance as driver data before enabling runtime PM to
prevent NULL pointer dereference in runtime PM callbacks.
Reorder pm_runtime_enable() and pm_runtime_forbid() to prevent a
short window where an unnecessary runtime suspend can occur.
Use the devres-managed version to ensure PM runtime is symmetrically
disabled during driver removal for proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver
at91_adc_interrupt can call at91_adc_touch_data_handler function
to start the work by schedule_work(&st->touch_st.workq).
If we remove the module which will call at91_adc_remove to
make cleanup, it will free indio_dev through iio_device_unregister but
quite a bit later. While the work mentioned above will be used. The
sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| at91_adc_workq_handler
at91_adc_remove |
iio_device_unregister(indio_dev) |
//free indio_dev a bit later |
| iio_push_to_buffers(indio_dev)
| //use indio_dev
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in at91_adc_remove. |
