Export limit exceeded: 402912 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (402912 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98371 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix runt reassembly panic from short inner tot_len When the start of an inner packet is split across two outer packets such that fewer than 4 bytes land at the end of the first one, __input_process_payload() saves those bytes as a runt and skips the iplen/iphlen validation performed for in-place packets. When the continuation packet arrives, iptfs_reassem_cont() only requires the declared inner length to be >= sizeof(ra_runt) (6) before allocating the reassembly skb with that attacker-controlled length. However, __iptfs_iphlen() always returns the fixed minimum IP header size (20 for IPv4, 40 for IPv6), so for an inner IPv4 tot_len in [6, 19] the header-completion copy writes past the declared packet length, and the subsequent "ipremain -= copylen" underflows to ~4GB, leaving the payload copy length bounded only by blkoff (up to 64KB). At runtime the skb_put() tailroom check turns this into skb_over_panic(), i.e. an unprivileged kernel panic (DoS), reachable locally via userns+netns IPTFS SAs and remotely against IPTFS VPN gateways when the decrypted outer skb is linear (e.g. AF_PACKET taps, tun/tap delivery). Align the runt path with the normal path by requiring the declared inner length to cover at least the IP header size. This also subsumes the previous >= sizeof(ra_runt) check, since the minimum IP header is always larger than the runt buffer. This issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab. | ||||
| CVE-2026-105485 | 1 Devolutions | 1 Server | 2026-10-07 | 6.8 Medium |
| Authentication bypass OAuth device authorization flow in Devolutions Server 2026.3.7.0 and earlier allows a remote attacker to take over a user's account via replay of a captured device verification link by an authenticated victim. | ||||
| CVE-2026-105324 | 1 Asustor | 1 Adm | 2026-10-07 | N/A |
| An HTTP header injection vulnerability in start-page-loader.cgi of ADM allows an unauthenticated remote attacker to read arbitrary files on the host system. By sending a crafted HTTP request with injected headers via the state parameter, the attacker can leverage the underlying web server's X-Sendfile mechanism to retrieve sensitive files without authentication. Affected products and versions include: from ADM 4.1.0 through ADM 4.3.3.RWC1 as well as from ADM 5.0.0 through ADM 5.1.4.RL21. | ||||
| CVE-2026-98296 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate TX skb length in send_sync btintel_pcie_prepare_tx() copies skb->len bytes into a fixed BTINTEL_PCIE_BUFFER_SIZE (4096) DMA slot via an unchecked memcpy. Oversized packets are currently rejected only in btintel_pcie_send_frame(); any future caller of btintel_pcie_send_sync() would silently overflow the DMA buffer. Add the bounds check in btintel_pcie_send_sync() itself, right before skb_push() and the DMA copy. | ||||
| CVE-2026-98302 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: fddi: skfp: fix NULL deref when setting the MAC address while down skfp_ctl_set_mac_address() calls ResetAdapter() unconditionally, without checking netif_running(). ResetAdapter() first calls card_stop(), which sets smc->hw.hw_state to STOPPED, and then mac_drv_clear_tx_queue(), which walks the two transmit queues: for (i = QUEUE_S; i <= QUEUE_A0; i++) { queue = smc->hw.fp.tx[i] ; ... t = queue->tx_curr_get ; smc->hw.fp.tx[] is only populated by init_tx(), which is reached from skfp_open() through init_smt() -> init_fddi_driver() -> init_fplus() -> init_mac() -> init_tx(). The private area is allocated and zeroed by alloc_fddidev(), so on an interface that has never been brought up both queue pointers are still NULL. The hw_state test at the top of mac_drv_clear_tx_queue() does not catch this, because card_stop() has just set STOPPED; the function proceeds into the loop and dereferences NULL. ResetAdapter() does call init_smt() itself, but only after the queues have been cleared. Setting the MAC address on a down interface therefore oopses: ip link set dev fddi0 address 02:00:00:00:00:01 BUG: KASAN: null-ptr-deref in mac_drv_clear_tx_queue+0x68/0x2c0 [skfp] Read of size 8 at addr 0000000000000010 by task ip/302 Call Trace: <TASK> mac_drv_clear_tx_queue+0x68/0x2c0 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] ResetAdapter+0x29/0x100 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] skfp_ctl_set_mac_address+0x57/0x80 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] netif_set_mac_address+0x1e4/0x2c0 do_setlink+0x684/0x2680 </TASK> Address 0x10 is the offset of tx_curr_get, the third pointer in struct s_smt_tx_queue, on 64-bit. mac_drv_clear_rx_queue(), which ResetAdapter() calls immediately afterwards, dereferences smc->hw.fp.rx[QUEUE_R1] in the same way behind the same ineffective hw_state test; the transmit queue merely crashes first. Both are covered by the guard below. Skip the adapter reset when the interface is down. dev_addr_set() is left unconditional, so the new address is still recorded in dev->dev_addr. Nothing is lost by not resetting the adapter here: skfp_open() deliberately re-reads the factory address on every open, read_address(smc, NULL); eth_hw_addr_set(dev, smc->hw.fddi_canon_addr.a); and the comment above it states this is done to discard exactly such an address override across a close/open cycle. An address set while the interface is down could not have survived the following open even before this change, so the guard removes no working behaviour. Guarding the hardware side of ndo_set_mac_address() with netif_running() is established practice; skge_set_mac_address() has done so since commit 2eb3e621c4e0 ("skge: set mac address bonding fix"). Guarding the reset as a whole, rather than NULL-checking the queues, is also what the rest of the driver expects. After a previous open/close the queue pointers are stale but non-NULL, so there is no crash, yet ResetAdapter() goes on to call smt_online() and STI_FBI() ("Enable Board Interrupts") while skfp_close() has already called free_irq() - the adapter would be brought back online with no handler installed. The only other ResetAdapter() caller is skfp_interrupt(), which by construction runs only while the device is open. Found by automated driver testing against an emulated SysKonnect FDDI adapter under a KASAN-enabled 7.0.0 kernel. Triggering it requires CAP_NET_ADMIN. | ||||
| CVE-2026-98314 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: set timer->private_data before registering the PCM timer snd_pcm_timer_init() calls snd_device_register() to link the new struct snd_timer into the global timer list while it still carries hw.c_resolution = snd_pcm_timer_resolution (and hw.start/hw.stop), and only afterwards sets timer->private_data = substream. Once the timer is on the list under register_mutex, a concurrent reader can already reach it through the same mutex and invoke these callbacks. /proc/asound/timers does this via c_resolution(), and snd_timer_open()+snd_timer_start() reach start()/stop() the same way. All three dereference timer->private_data, which for this brief window is NULL, giving a NULL-pointer dereference: substream = timer->private_data; return substream->runtime ? ... // substream is NULL Move the private_data/private_free assignment before snd_device_register() so the timer is never visible on the list without its private_data set. On the snd_device_register() failure path, private_free() (snd_pcm_timer_free()) can now run, but it only does substream->timer = NULL, which is already NULL at that point since substream->timer is set to the new timer just once, after a successful registration -- so the failure path stays safe. | ||||
| CVE-2026-98322 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_nat: fully initialise new_addr in netmap setup nft_nat_setup_netmap() builds the mapped address in an on-stack union nf_inet_addr. For an IPv4 mapping it writes only the 4-byte .ip member and the loop runs a single 32-bit iteration, but it then copies the whole 16-byte union into range->min_addr and range->max_addr, so the upper 12 bytes reach nf_nat_setup_info() uninitialised. KMSAN reports an uninit-value in nf_nat_setup_info() reached from nft_nat_eval(). The IPv6 path fills all 16 bytes and is not affected. Zero-initialise new_addr. | ||||
| CVE-2026-98332 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: only operate on TDLS peers in the TDLS code ieee80211_tdls_oper() can operate on the AP station, which then yields various warnings when the AP station is removed then or at a later point in time after being confused for a TDLS peer. Always check that the station is a TDLS peer. | ||||
| CVE-2026-98335 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: abort chanswitch when leaving a mesh The code in ieee80211_stop_mesh() leaves CSA active, but leaving the mesh released the channel context, so the CSA finalize work crashes: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003 KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:ieee80211_put_srates_elem+0x42/0x640 net/mac80211/util.c:3272 Call Trace: ieee80211_mesh_build_beacon+0xa83/0x1b50 net/mac80211/mesh.c:1093 ieee80211_mesh_rebuild_beacon+0xc7/0x170 net/mac80211/mesh.c:1147 ieee80211_mesh_finish_csa+0x131/0x210 net/mac80211/mesh.c:1542 ieee80211_set_after_csa_beacon net/mac80211/cfg.c:4085 [inline] __ieee80211_csa_finalize net/mac80211/cfg.c:4133 [inline] ieee80211_csa_finalize+0x633/0x1150 net/mac80211/cfg.c:4155 cfg80211_wiphy_work+0x2ab/0x450 net/wireless/core.c:438 Abort the channel switch properly. | ||||
| CVE-2026-98336 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't offload TC setup on AP_VLAN interfaces AP_VLAN interfaces are purely virtual, so don't try to offload TC setup to drivers. We can't really use the AP interface either since we may not know it all the time, and it could technically even change. Just reject the TC offload so things get done in software. | ||||
| CVE-2026-98347 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: IB/IPoIB: Avoid restoring OPER_UP after multicast flush ipoib_ib_dev_flush_light() temporarily clears IPOIB_FLAG_OPER_UP to prevent multicast joins while ipoib_mcast_dev_flush() is running, and restores the flag afterwards if it was previously set. This restore races with ipoib_ib_dev_down(). If the interface is brought down while the flush is in progress, ipoib_ib_dev_down() clears IPOIB_FLAG_OPER_UP, but the flush path may set it again after the device has already gone down. Since commit 894021a75291 ("IB/ipoib: Make the carrier_on_task race aware"), ipoib_mcast_carrier_on_task() relies on IPOIB_FLAG_OPER_UP being cleared to terminate its rtnl_trylock() retry loop. If the flag is left set after shutdown, the workqueue retries forever, causing teardown to deadlock when ipoib_ndo_uninit() waits in destroy_workqueue() while holding RTNL. Instead of overloading IPOIB_FLAG_OPER_UP to block multicast joins during a light flush, introduce a dedicated IPOIB_FLAG_MCAST_FLUSH flag. Use it together with IPOIB_FLAG_OPER_UP to determine whether multicast joins are allowed, avoiding the race with device shutdown. | ||||
| CVE-2026-98351 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: free skb when disconnected When the simulated link is disconnected, virt_wifi_start_xmit() returns NET_XMIT_DROP without freeing the skb. dev_hard_start_xmit() treats this return value as consumed, so every packet sent while disconnected leaks its skb. Free the skb before returning the drop status. | ||||
| CVE-2026-106182 | 1 Google | 1 Chrome | 2026-10-07 | 5.4 Medium |
| UI misrepresentation in Paint in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-106405 | 1 Google | 1 Chrome | 2026-10-07 | 6.0 Medium |
| Race condition in CustomTabs in Google Chrome on on Android prior to 155.0.8059.39 allowed a local attacker to bypass web origin policy via a co-installed app. (Chromium security severity: Medium) | ||||
| CVE-2026-106322 | 1 Google | 1 Chrome | 2026-10-07 | N/A |
| Open redirect in AppManifest in Google Chrome prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-106289 | 1 Google | 1 Chrome | 2026-10-07 | N/A |
| Missing authorization in FedCM in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-106216 | 1 Google | 1 Chrome | 2026-10-07 | N/A |
| Cross-site request forgery in ReadingList in Google Chrome on on Android prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-105842 | 1 Lrzsz Project | 1 Lrzsz | 2026-10-07 | 6.4 Medium |
| lrzsz before 0.13.0 contains a heap-based buffer overflow vulnerability in procheader() of the lrz receive utility when copying overlong sender-supplied filenames into Pathname. Malicious ZMODEM senders can supply filenames up to 8192 bytes, overflowing the buffer via sprintf() in pipe mode or strcpy() to corrupt heap memory and crash lrz. | ||||
| CVE-2026-106203 | 1 Google | 1 Chrome | 2026-10-07 | 8.8 High |
| Incomplete cleanup in Autofill in Google Chrome on on iOS prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to obtain sensitive information via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-106183 | 1 Google | 1 Chrome | 2026-10-07 | 5.9 Medium |
| Missing authorization in Chromoting in Google Chrome on on Windows prior to 155.0.8059.39 allowed a remote attacker to obtain sensitive information via crafted network traffic. (Chromium security severity: Medium) | ||||