| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability classified as critical has been found in Multilaser Sirius RE016 MLT1.0. Affected is an unknown function of the file /cgi-bin/cstecgi.cgi of the component Password Change Handler. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Fix bootlog initialization ordering
As soon as we queue MHI buffers to receive the bootlog from the device,
we could be receiving data. Therefore all the resources needed to
process that data need to be setup prior to queuing the buffers.
We currently initialize some of the resources after queuing the buffers
which creates a race between the probe() and any data that comes back
from the device. If the uninitialized resources are accessed, we could
see page faults.
Fix the init ordering to close the race. |
| CKAN is an open-source DMS (data management system) for powering data hubs and data portals. Prior to 2.10.9 and 2.11.4, the helpers.markdown_extract() function did not perform sufficient sanitization of input data before wrapping in an HTML literal element. This helper is used to render user-provided data on dataset, resource, organization or group pages (plus any page provided by an extension that used that helper function), leading to a potential XSS vector. This vulnerability has been fixed in CKAN 2.10.9 and 2.11.4. |
| Path traversal vulnerability in “getAllFolderContents” function of Common Service Desktop, a GE HealthCare ultrasound device component |
| A Cross-Site Request Forgery (CSRF) vulnerability exists in the ResetPasswordRequest operation of Zimbra Collaboration (ZCS) when the zimbraFeatureResetPasswordStatus attribute is enabled. An attacker can exploit this by tricking an authenticated user into visiting a malicious webpage that silently sends a crafted SOAP request to reset the user's password. The vulnerability stems from a lack of CSRF token validation on the endpoint, allowing password resets without the user's consent. |
| A vulnerability in the EnableTwoFactorAuthRequest SOAP endpoint of Zimbra Collaboration (ZCS) allows an attacker with valid user credentials to bypass Two-Factor Authentication (2FA) protection. The attacker can configure an additional 2FA method (either a third-party authenticator app or email-based 2FA) without presenting a valid authentication token or proving access to an already configured 2FA method. This bypasses 2FA and results in unauthorized access to accounts that are otherwise protected by 2FA. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: zynqmp-ipi: Fix out-of-bounds access in mailbox cleanup loop
The cleanup loop was starting at the wrong array index, causing
out-of-bounds access.
Start the loop at the correct index for zero-indexed arrays to prevent
accessing memory beyond the allocated array bounds. |
| skops is a Python library which helps users share and ship their scikit-learn based models. Versions 0.11.0 and below contain a inconsistency in the OperatorFuncNode which can be exploited to hide the execution of untrusted operator methods. This can then be used in a code reuse attack to invoke seemingly safe functions and escalate to arbitrary code execution with minimal and misleading trusted types. This is fixed in version 0.12.0. |
| skops is a Python library which helps users share and ship their scikit-learn based models. Versions 0.11.0 and below contain an inconsistency in MethodNode, which can be exploited to access unexpected object fields through dot notation. This can be used to achieve arbitrary code execution at load time. While this issue may seem similar to GHSA-m7f4-hrc6-fwg3, it is actually more severe, as it relies on fewer assumptions about trusted types. This is fixed in version 12.0.0. |
| dag-factory is a library for Apache Airflow® to construct DAGs declaratively via configuration files. In versions 0.23.0a8 and below, a high-severity vulnerability has been identified in the cicd.yml workflow within the astronomer/dag-factory GitHub repository. The workflow, specifically when triggered by pull_request_target, is susceptible to exploitation, allowing an attacker to execute arbitrary code within the GitHub Actions runner environment. This misconfiguration enables an attacker to establish a reverse shell, exfiltrate sensitive secrets, including the highly-privileged GITHUB_TOKEN, and ultimately gain full control over the repository. This is fixed in version 0.23.0a9. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix debug checking for np-guests using huge mappings
When running with transparent huge pages and CONFIG_NVHE_EL2_DEBUG then
the debug checking in assert_host_shared_guest() fails on the launch of an
np-guest. This WARN_ON() causes a panic and generates the stack below.
In __pkvm_host_relax_perms_guest() the debug checking assumes the mapping
is a single page but it may be a block map. Update the checking so that
the size is not checked and just assumes the correct size.
While we're here make the same fix in __pkvm_host_mkyoung_guest().
Info: # lkvm run -k /share/arch/arm64/boot/Image -m 704 -c 8 --name guest-128
Info: Removed ghost socket file "/.lkvm//guest-128.sock".
[ 1406.521757] kvm [141]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/mem_protect.c:1088!
[ 1406.521804] kvm [141]: nVHE call trace:
[ 1406.521828] kvm [141]: [<ffff8000811676b4>] __kvm_nvhe_hyp_panic+0xb4/0xe8
[ 1406.521946] kvm [141]: [<ffff80008116d12c>] __kvm_nvhe_assert_host_shared_guest+0xb0/0x10c
[ 1406.522049] kvm [141]: [<ffff80008116f068>] __kvm_nvhe___pkvm_host_relax_perms_guest+0x48/0x104
[ 1406.522157] kvm [141]: [<ffff800081169df8>] __kvm_nvhe_handle___pkvm_host_relax_perms_guest+0x64/0x7c
[ 1406.522250] kvm [141]: [<ffff800081169f0c>] __kvm_nvhe_handle_trap+0x8c/0x1a8
[ 1406.522333] kvm [141]: [<ffff8000811680fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4
[ 1406.522454] kvm [141]: ---[ end nVHE call trace ]---
[ 1406.522477] kvm [141]: Hyp Offset: 0xfffece8013600000
[ 1406.522554] Kernel panic - not syncing: HYP panic:
[ 1406.522554] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800
[ 1406.522554] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000
[ 1406.522554] VCPU:0000000000000000
[ 1406.523337] CPU: 3 UID: 0 PID: 141 Comm: kvm-vcpu-0 Not tainted 6.16.0-rc7 #97 PREEMPT
[ 1406.523485] Hardware name: FVP Base RevC (DT)
[ 1406.523566] Call trace:
[ 1406.523629] show_stack+0x18/0x24 (C)
[ 1406.523753] dump_stack_lvl+0xd4/0x108
[ 1406.523899] dump_stack+0x18/0x24
[ 1406.524040] panic+0x3d8/0x448
[ 1406.524184] nvhe_hyp_panic_handler+0x10c/0x23c
[ 1406.524325] kvm_handle_guest_abort+0x68c/0x109c
[ 1406.524500] handle_exit+0x60/0x17c
[ 1406.524630] kvm_arch_vcpu_ioctl_run+0x2e0/0x8c0
[ 1406.524794] kvm_vcpu_ioctl+0x1a8/0x9cc
[ 1406.524919] __arm64_sys_ioctl+0xac/0x104
[ 1406.525067] invoke_syscall+0x48/0x10c
[ 1406.525189] el0_svc_common.constprop.0+0x40/0xe0
[ 1406.525322] do_el0_svc+0x1c/0x28
[ 1406.525441] el0_svc+0x38/0x120
[ 1406.525588] el0t_64_sync_handler+0x10c/0x138
[ 1406.525750] el0t_64_sync+0x1ac/0x1b0
[ 1406.525876] SMP: stopping secondary CPUs
[ 1406.525965] Kernel Offset: disabled
[ 1406.526032] CPU features: 0x0000,00000080,8e134ca1,9446773f
[ 1406.526130] Memory Limit: none
[ 1406.959099] ---[ end Kernel panic - not syncing: HYP panic:
[ 1406.959099] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800
[ 1406.959099] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000
[ 1406.959099] VCPU:0000000000000000 ] |
| Polkadot Frontier is an Ethereum and EVM compatibility layer for Polkadot and Substrate. In versions prior to commit 36f70d1, the Curve25519Add and Curve25519ScalarMul precompiles incorrectly handle invalid Ristretto point representations. Instead of returning an error, they silently treat invalid input bytes as the Ristretto identity element, leading to potentially incorrect cryptographic results. This is fixed in commit 36f70d1. |
| RevelaCode is an AI-powered faith-tech project that decodes biblical verses, prophecies and global events into accessible language. In versions below 1.0.1, a valid MongoDB Atlas URI with embedded username and password was accidentally committed to the public repository. This could allow unauthorized access to production or staging databases, potentially leading to data exfiltration, modification, or deletion. This is fixed in version 1.0.1. Workarounds include: immediately rotating credentials for the exposed database user, using a secret manager (like Vault, Doppler, AWS Secrets Manager, etc.) instead of storing secrets directly in code, or auditing recent access logs for suspicious activity. |
| ChatLuck contains an insufficient granularity of access control vulnerability in Invitation of Guest Users. If exploited, an uninvited guest user may register itself as a guest user. |
| This vulnerability exists in ZKTeco WL20 due to storage of admin and user credentials without encryption in the device firmware. An attacker with physical access could exploit this vulnerability by extracting the firmware and reverse engineer the binary data to access the unencrypted credentials stored in the firmware of targeted device. |
| When a Java command with password parameters is executed and terminated by NeuVector for Process rule violation the password will appear in the NeuVector security event log. |
| Akamai Rate Control alpha before 2025 allows attackers to send requests above the stipulated thresholds because the rate is measured separately for each edge node. |
| A vulnerability has been identified within Rancher Manager whereby `Impersonate-Extra-*` headers are being sent to an external entity, for example `amazonaws.com`, via the `/meta/proxy` Rancher endpoint. These headers may contain identifiable and/or sensitive information e.g. email addresses. |
| This vulnerability affects NeuVector deployments only when the Report anonymous cluster data option is enabled. When this option is enabled, NeuVector sends anonymous telemetry data to the telemetry server.
In affected versions, NeuVector does not enforce TLS
certificate verification when transmitting anonymous cluster data to the
telemetry server. As a result, the communication channel is susceptible
to man-in-the-middle (MITM) attacks, where an attacker could intercept
or modify the transmitted data. Additionally, NeuVector loads the
response of the telemetry server is loaded into memory without size
limitation, which makes it vulnerable to a Denial of Service(DoS)
attack |
| NeuVector used a hard-coded cryptographic key embedded in the source
code. At compilation time, the key value was replaced with the secret
key value and used to encrypt sensitive configurations when NeuVector
stores the data. |
