| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix netns reference imbalance in conntrack kfuncs
The opts argument of the BPF conntrack kfuncs can point to a shared
map value. __bpf_nf_ct_lookup() and __bpf_nf_ct_alloc_entry() read
opts->netns_id separately when acquiring and releasing the network
namespace reference.
The reference imbalance can occur as follows:
CPU 0 CPU 1
read opts->netns_id (-1)
skip get_net_ns_by_id()
write opts->netns_id (id)
read opts->netns_id (id)
put_net(net) /* no matching get */
The reverse transition leaks the reference. Repeating the unmatched put
can destroy a live namespace and crash later users.
The kernel reported:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
RIP: 0010:bpf_prog_test_run_xdp+0x52c/0x1700
Call Trace:
__sys_bpf+0x1662/0x50c0
__x64_sys_bpf+0x73/0xb0
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Kernel panic - not syncing: Fatal exception
Snapshot every input field of opts with READ_ONCE() before validating or
using it. The netns_id snapshot keeps the namespace get/put pair
balanced, while the other snapshots keep the remaining options from
changing partway through an invocation. The individual reads can still
observe an inconsistent combination during a concurrent update, but each
selected field value remains stable for that invocation. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: stabilize tty reference in kbd_keycode with tty_port_tty_get
kbd_keycode() reads vc->port.tty without acquiring a tty reference,
racing against con_shutdown() which clears port.tty under a different
lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference
for the duration the tty pointer is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: fw_tracer, return NULL on create error
Tracer creation can fail by returning either NULL or ERR_PTR.
The return value is stored without a check on the device, and users
treat ERR_PTR and NULL the same way.
This also causes a crash in the core dump logic, which is missing the
ERR_PTR check and ends up dereferencing it, as shown in the trace below.
Switch tracer creation to return NULL on failure only, so callers only
need a single NULL check.
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in: mlx5_ib ib_uverbs ib_core ipv6 mlx5_core
CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.19.7 #1 PREEMPT(none)
Workqueue: mlx5_health0001:01:00.0 mlx5_fw_reporter_err_work [mlx5_core]
pstate: a3400009 (NzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core]
lr : mlx5_fw_tracer_trigger_core_dump_general+0x40/0xe0 [mlx5_core]
sp : ffff800081cf3c40
x29: ffff800081cf3c90 x28: 0000000000000000 x27: 0000000000000000
x26: ffff000080018828 x25: 0000000000000000 x24: ffff000080304a05
x23: ffff800081cf3d80 x22: ffff0000847e01a0 x21: 0000000000000000
x20: ffff0000847e01a0 x19: ffffffffffffffa1 x18: ffff80008310bbf0
x17: ffff800080119650 x16: ffff80008010df54 x15: ffff80008010d4ac
x14: ffff800079c202e4 x13: ffff80008002fe60 x12: ffff800080119650
x11: ffff80008010df54 x10: ffff80008010d4ac x9 : ffff800079c203d8
x8 : ffff800081cf3c88 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000008 x3 : 0000000000000030
x2 : 0000000000000008 x1 : 0000000000000000 x0 : 00000000c5c4000e
Call trace:
mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] (P)
mlx5_fw_reporter_dump+0x30/0x2e0 [mlx5_core]
devlink_health_do_dump+0x9c/0x160
devlink_health_report+0x1c0/0x288
mlx5_fw_reporter_err_work+0xac/0xc0 [mlx5_core]
process_one_work+0x15c/0x3d8
worker_thread+0x18c/0x320
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Code: b9400000 5ac00800 7a401800 540003ca (3940a260)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x000000,00078031,75fce5a1,35fffe67
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Use unsigned int for ndp_index
The variable ndp_index is declared as a signed integer, but it stores
the return value of get_ncm(), which is unsigned.
A malicious host can supply a large offset that overflows the signed
ndp_index, making it negative. Because ndp_index is compared against
unsigned bounds, this negative value bypasses sanity checks and leads
to an out-of-bounds read when calculating the address of the NDP
block (ntb_ptr + ndp_index).
Fix this by changing ndp_index to unsigned int to ensure consistent
unsigned comparisons throughout the function. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix sk_redir use-after-free in send verdict
sk_psock_msg_verdict() takes a socket reference for psock->sk_redir.
tcp_bpf_send_verdict() copies that pointer while holding the source socket
lock, but does not take a reference for the local copy before dropping the
lock around tcp_bpf_sendmsg_redir().
When apply_bytes keeps the cached verdict active, another sendmsg() on the
same source socket can consume the remaining bytes and release the cached
reference while the first thread still holds only the raw local pointer:
CPU 0 CPU 1
sk_redir = psock->sk_redir
apply_bytes remains nonzero
release_sock(sk)
lock_sock(sk)
apply_bytes reaches zero
psock->sk_redir = NULL
release_sock(sk)
tcp_bpf_sendmsg_redir(sk_redir)
sock_put(sk_redir)
tcp_bpf_sendmsg_redir(sk_redir)
The final sock_put() can free sk_redir before CPU 0 dereferences it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tcp_bpf_sendmsg_redir+0xf39/0x1020
Read of size 8 at addr ffff888108537090 by task poc/87
Call Trace:
tcp_bpf_sendmsg_redir+0xf39/0x1020
tcp_bpf_sendmsg+0x977/0x1a50
__sys_sendto+0x32c/0x3a0
__x64_sys_sendto+0xdb/0x1b0
Allocated by task 85:
sk_prot_alloc+0x56/0x210
sk_clone+0x6f/0x14b0
inet_csk_clone_lock+0x24/0x740
tcp_create_openreq_child+0x25/0x2710
tcp_v4_syn_recv_sock+0x10a/0xe00
Freed by task 0:
__kasan_slab_free+0x43/0x70
slab_free_after_rcu_debug+0xa6/0x1e0
rcu_core+0x50a/0x1850
Last potentially related work creation:
__sk_destruct+0x3da/0x540
sk_psock_destroy+0x81e/0xab0
process_one_work+0x63a/0x1070
Take a temporary socket reference while the source socket lock still
protects psock->sk_redir, and drop it after tcp_bpf_sendmsg_redir()
returns. This keeps each unlocked use independent of cached-verdict
ownership. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_dma: Clear stale RX state on shutdown
serial8250_release_dma() terminates RX DMA and releases the channel, but
leaves rx_running set. If the port is closed while an RX transfer is
active, the stale state remains while rxchan is NULL until the channel is
requested again on the next open.
The DesignWare BUSY workaround added by commit a7b9ce39fbe4
("serial: 8250_dw: Ensure BUSY is deasserted") calls
serial8250_rx_dma_flush() from the LCR write path during startup. This
happens before serial8250_request_dma() obtains a new RX channel. On
reopen, the stale rx_running state therefore makes the flush path pass a
NULL channel to dmaengine_pause(), causing a kernel Oops.
Clear rx_running after terminating RX DMA, matching the TX cleanup. Also
make the flush helper return if the DMA object or RX channel is not
available so startup and teardown paths cannot pass a NULL channel to the
DMAengine API. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: fix netdev use-after-free in beacon worker
mac802154_beacon_worker() reads local->beacon_req under RCU and derives
the sub-interface from the request, but then drops the RCU read lock and
continues to use both sdata and the embedded wpan_dev.
mac802154_stop_beacons_locked() cancels only pending beacon work, clears
local->beacon_req and frees the request. A beacon worker that is already
running can therefore continue after interface teardown and dereference
the freed netdev private area.
The scan worker already pins the netdev before leaving RCU. Apply the
same lifetime rule to the beacon worker: take a netdev reference while
the request is still protected by RCU, and release it on all paths that
continue after the reference is acquired. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: reject overly deep qdisc hierarchies
Deep qdisc hierarchies can lead to excessive recursion in qdisc tree
walkers and exhaust the kernel stack. The existing loop check does not
cover the create-and-graft path, so a hierarchy can still be extended by
creating a new child qdisc below an already deep parent.
Store the hierarchy depth in struct Qdisc and update it when qdiscs are
grafted. Reject new child qdiscs once the parent is already at the maximum
allowed depth. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: clear new_transport when removing a peer
sctp_process_asconf_param() stores a newly added peer transport in
asoc->new_transport. After all parameters in the ASCONF chunk have been
processed, sctp_sf_do_asconf() uses this pointer to send a HEARTBEAT to the
new transport.
An authenticated ASCONF from a remote SCTP peer can add a transport and
remove it again with a wildcard DEL-IP parameter in the same chunk. The
wildcard deletion preserves the transport on which the ASCONF arrived, but
removes the newly added transport through
sctp_assoc_del_nonprimary_peers(). The removal does not clear
asoc->new_transport, leaving it pointing to the removed transport.
sctp_sf_do_asconf() then creates a HEARTBEAT whose chunk->transport points
to the removed transport without holding a transport reference. During
local address replacement, src_out_of_asoc_ok keeps this HEARTBEAT on
control_chunk_list. After the transport is freed by RCU, a successful
ASCONF_ACK for the replacement address releases the queued HEARTBEAT and
sctp_outq_select_transport() reads the freed transport's state.
The issue was found during a static audit of SCTP objects. With an
authenticated peer, the reproducer triggered the same KASAN report in 2
of 2 unpatched runs on a KASAN-enabled netdev/main kernel:
BUG: KASAN: slab-use-after-free in sctp_outq_select_transport
Read of size 4 at addr ffff88800b9bd95c by task python3/197
Call Trace:
sctp_outq_select_transport+0x549/0x8b0 [sctp]
sctp_outq_flush+0x306/0x2c60 [sctp]
sctp_transport_immediate_rtx+0xaf/0x260 [sctp]
sctp_process_asconf_ack+0xa48/0xf70 [sctp]
Allocated by task 197:
sctp_transport_new+0x68/0x650 [sctp]
sctp_assoc_add_peer+0x258/0x12a0 [sctp]
sctp_process_asconf+0x5e9/0x1090 [sctp]
Last potentially related work creation:
__call_rcu_common.constprop.0+0x77/0xb70
sctp_assoc_del_nonprimary_peers+0x7c/0xd0 [sctp]
sctp_process_asconf+0xd9c/0x1090 [sctp]
The first invalid access was a four-byte read of transport->state at
net/sctp/outqueue.c:833. The same reproducer completed the full
authenticated ASCONF and local-address replacement sequence with this
change without a KASAN report or oops.
Clear new_transport when its peer is removed, before it can be used to
create the HEARTBEAT. |
| In the Linux kernel, the following vulnerability has been resolved:
fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions
The BPF verifier and the dynptr abstraction ensure that the memory space
referenced by a dynptr remains valid. They do not, however, provide any
guarantee that the contents of the memory are stable. kfuncs are
expected to remain memory-safe even if concurrent modifications occur.
bpf_get_fsverity_digest() didn't follow that: it could crash if
arg->digest_size was concurrently modified.
Fix that by using the known-good value hash_alg->digest_size instead.
Also widen 'dynptr_sz' and 'out_digest_sz' to u64 to match the return
type of __bpf_dynptr_size(). It doesn't appear that it can actually be
more than INT_MAX currently (since __bpf_dynptr_data_rw() excludes
file-based pointers), but the correct type might as well be used. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mrp: fix uninitialised bytes on the wire
br_mrp_alloc_test_skb() builds MRP test frames on an skb from
dev_alloc_skb(), which does not clear the linear data area. On the MRA
ring-role branch the sub-option TLV header is appended with
sub_tlv = skb_put(skb, sizeof(*sub_tlv));
sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR;
so sub_tlv->length is never written, and the two trailing alignment bytes
are appended with a bare skb_put() that does not clear them either. The
neighbouring oui and sub_opt regions are explicitly zeroed, so three
uninitialised bytes are left in every MRA MRP_Test frame that goes out.
Put the sub-option TLV header and the alignment padding in a single
skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no
payload, so the zeroed length field is already the value it should have. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix skb length accounting after generic XDP frag adjustment
Generic XDP exposes non-linear skb fragments through an xdp_buff. If an
XDP program adjusts the fragment area, bpf_prog_run_generic_xdp() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly. |
| In setupLayout of PickActivity.java, there is a possible way to start any activity as a DocumentsUI app due to a confused deputy. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: Fix board ID over-read
The EEPROM board ID is a fixed 13-byte field and is not guaranteed to
contain a NUL terminator. Passing it directly to
devlink_info_version_fixed_put() treats it as a C string and may read
beyond the field.
Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer
before reporting the ID. Use a precision limit because the snprintf()
output size alone does not bound the source string scan. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Use children field for rcu head and add memory barriers
When an eventfs inode is freed, it sets ei->is_freed and then uses its
ei->list to add it to the srcu link list as the list field is a union with
the rcu list head. As the ei->list is used to iterate over an SRCU
protected list without taking the eventfs_mutex, there's nothing stopping
the iteration over that list to see the ei->rcu instead of the ei->list
and it will read a corrupt target.
To fix this, change the union of the rcu list head with the children list.
On freeing the eventfs inode, set the is_free and execute a smp_wmb()
before adding the eventfs inode to the SRCU list.
On iteration of the ei->children list, at the start, execute a smp_rmb()
and then read the is_freed of the ei to see if the children list is still
valid. If is_freed is set, then the ei_child read is not valid and the
loop should exit immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: don't leave a full plaintext sk_msg ring unpushed
When the copy path in tls_sw_sendmsg_locked() adds the fragment that fills
the plaintext sk_msg ring, it does not set full_record, so the record is
left full and unpushed. A later splice() then adds to an already full
ring: sk_msg_page_add() has no fullness check of its own, so sg.end wraps
onto sg.start and the ring appears empty. Fragments added after that
overwrite live entries, and sg.size no longer matches what is reachable
between sg.start and sg.end, so pushing the record runs the scatterwalk off
the end of the scatterlist.
An unprivileged user can trigger this on a loopback TCP socket with the
"tls" ULP attached:
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:memcpy_from_scatterwalk+0x32/0xc0
Call Trace:
skcipher_walk_next+0x1d1/0x2c0
gcm_encrypt_aesni_avx+0x1e9/0x220
bpf_exec_tx_verdict+0x3bb/0x860
tls_sw_sendmsg+0xa1a/0xca0
__sys_sendto+0x1da/0x1f0
Set full_record in the copy path when the ring becomes full, and push a
record that is already full on entry to the sendmsg loop. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: rx: restore msg_iter before TLS 1.3 optimistic retry
tls_decrypt_sg() advances msg->msg_iter when it maps user pages for
the optimistic TLS 1.3 zero-copy path. If the decrypted record turns
out not to be unpadded application data, tls_decrypt_sw() retries into
a kernel skb, but leaves the iterator advanced.
The subsequent copy from the skb then writes decrypted bytes again at
a later point in the caller iovecs while recvmsg() reports only the
post-retry length. A TLS peer can trigger this after the receiver
enables TLS_RX_EXPECT_NO_PAD.
Revert the iterator by the number of bytes consumed by the optimistic
mapping before retrying without zero-copy.
Add a selftest which sends a TLS 1.3 control record with
TLS_RX_EXPECT_NO_PAD enabled and verifies that recvmsg() does not
overwrite later iovecs beyond the returned length. |
| In the Linux kernel, the following vulnerability has been resolved:
net/dibs: Correct freeing of dmb_clientid_arr
A dibs device interrupt handler can be active after dibs_dev_del() and
may still access dmb_clientid_arr. (UAF)
In case of a failure in dibs_dev_add() being called by dibs_lo_dev_probe()
dmb_clientid_arr is freed twice (double free).
Free dmb_clientid_arr in dibs_dev_release() after last reference is gone.
Note that allocating in dibs_dev_add() instead of dibs_dev_alloc() is ok
for now, because no dmbs can be registered before dibs_dev_add(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: bitblit: bound-check glyph index in bit_cursor()
bit_cursor() fetches the glyph under the cursor with
c = scr_readw(vc_pos);
src = vc_font.data + ((c & charmask) * w * height);
where charmask is 0x1ff when vc_hi_font_mask is set. The screen buffer
value comes directly from scr_readw() and may be larger than the current
font's glyph count.
Syzkaller triggers this via vcs_write(). The Call Trace shows
vcs_write() in vc_screen.c writing an arbitrary 16-bit value with
writev() to /dev/vcsa, which vcs_write_buf() in vc_screen.c stores via
vcs_scr_writew() without checking charcount. The stored value is later
read in bit_cursor() in bitblit.c.
When the font is changed from a font with 512 glyphs to a font with
256 glyphs, the screen buffer can retain characters with the high
bit set from the previous mode, which could also produce the same
out-of-bounds access.
BUG: KASAN: global-out-of-bounds in soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70
Read of size 16 at addr ffff800086c57970
Call Trace:
soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70
bit_cursor+0xa90/0x1108 drivers/video/fbdev/core/bitblit.c:365
fbcon_cursor+0x344/0x498 drivers/video/fbdev/core/fbcon.c:1427
hide_cursor+0xdc/0x2d0 drivers/tty/vt/vt.c:883
update_region+0x100/0x18c drivers/tty/vt/vt.c:669
vcs_write+0x8ec/0xaf0 drivers/tty/vt/vc_screen.c:685
bit_putcs_aligned() and bit_putcs_unaligned() already clamp the glyph
index to vc_font.charcount. Apply the same clamp in bit_cursor() after
extracting the attribute and masking, before indexing fontdata.
The fix completes the bounds checking started in commit 18c4ef4e765a
("fbdev: bitblit: bound-check glyph index in bit_putcs*"), which missed
the cursor path.
This change should be safe because the clamp reuses the existing
contract from fbcon: charcount is maintained under console_lock in
con_font_set() and fbcon_font_set(), and hi_font_mask is cleared when
switching from 512 to 256 glyphs. When stale screen data with high bits
remains after a font switch, or when vcs_write() stores an arbitrary
value, clamping the index to 0 prevents the out-of-bounds read without
changing cursor semantics — the same fallback bit_putcs uses. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: clear metadata pointer when no timestamp is requested
User space can change metadata flags after request processing. Rereading
them during completion can therefore make the kernel write a timestamp
that was not requested when the packet was submitted.
Clear the metadata pointer during request processing unless timestamp
completion is requested. Completion handling can then use the pointer
itself instead of rereading the flags.
On the mlx5 multi-packet WQE path metadata is evaluated per batch:
xsk_tx_metadata_request() runs only for the descriptor that starts a
session, just like the checksum offload that is applied once through the
shared WQE. Only that descriptor's pointer is reset, so completion
handling can record a timestamp for the other descriptors of the session
regardless of their own XDP_TXMD_FLAGS_TIMESTAMP bit. The write stays
inside the metadata area; the single-WQE, other zero-copy, and generic
paths reset the pointer per descriptor and are unaffected. |
