| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped
By inducing delays in the right places, Jann Horn created a reproducer for
a hard to hit UAF issue that became possible after VMAs were allowed to be
recycled by adding SLAB_TYPESAFE_BY_RCU to their cache.
Race description is borrowed from Jann's discovery report:
lock_vma_under_rcu() looks up a VMA locklessly with mas_walk() under
rcu_read_lock(). At that point, the VMA may be concurrently freed, and it
can be recycled by another process. vma_start_read() then increments the
vma->vm_refcnt (if it is in an acceptable range), and if this succeeds,
vma_start_read() can return a recycled VMA.
In this scenario where the VMA has been recycled, lock_vma_under_rcu()
will then detect the mismatching ->vm_mm pointer and drop the VMA through
vma_end_read(), which calls vma_refcount_put(). vma_refcount_put() drops
the refcount and then calls rcuwait_wake_up() using a copy of vma->vm_mm.
This is wrong: It implicitly assumes that the caller is keeping the VMA's
mm alive, but in this scenario the caller has no relation to the VMA's mm,
so the rcuwait_wake_up() can cause UAF.
The diagram depicting the race:
T1 T2 T3
== == ==
lock_vma_under_rcu
mas_walk
<VMA gets removed from mm>
mmap
<the same VMA is reallocated>
vma_start_read
__refcount_inc_not_zero_limited_acquire
munmap
__vma_enter_locked
refcount_add_not_zero
vma_end_read
vma_refcount_put
__refcount_dec_and_test
rcuwait_wait_event
<finish operation>
rcuwait_wake_up [UAF]
Note that rcuwait_wait_event() in T3 does not block because refcount was
already dropped by T1. At this point T3 can exit and free the mm causing
UAF in T1.
To avoid this we move vma->vm_mm verification into vma_start_read() and
grab vma->vm_mm to stabilize it before vma_refcount_put() operation.
[surenb@google.com: v3] |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate command request size
In commit 2b9b8f3b68ed ("ksmbd: validate command payload size"), except
for SMB2_OPLOCK_BREAK_HE command, the request size of other commands
is not checked, it's not expected. Fix it by add check for request
size of other commands. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix wrong next length validation of ea buffer in smb2_set_ea()
There are multiple smb2_ea_info buffers in FILE_FULL_EA_INFORMATION request
from client. ksmbd find next smb2_ea_info using ->NextEntryOffset of
current smb2_ea_info. ksmbd need to validate buffer length Before
accessing the next ea. ksmbd should check buffer length using buf_len,
not next variable. next is the start offset of current ea that got from
previous ea. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix out of bounds read in smb2_sess_setup
ksmbd does not consider the case of that smb2 session setup is
in compound request. If this is the second payload of the compound,
OOB read issue occurs while processing the first payload in
the smb2_sess_setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate session id and tree id in the compound request
This patch validate session id and tree id in compound request.
If first operation in the compound is SMB2 ECHO request, ksmbd bypass
session and tree validation. So work->sess and work->tcon could be NULL.
If secound request in the compound access work->sess or tcon, It cause
NULL pointer dereferecing error. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix out-of-bound read in smb2_write
ksmbd_smb2_check_message doesn't validate hdr->NextCommand. If
->NextCommand is bigger than Offset + Length of smb2 write, It will
allow oversized smb2 write length. It will cause OOB read in smb2_write. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: not allow guest user on multichannel
This patch return STATUS_NOT_SUPPORTED if binding session is guest. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: validate buffer count with offset for cloning
syzbot reports that it can trigger a WARN_ON() for kmalloc() attempt
that's too big:
WARNING: CPU: 0 PID: 6488 at mm/slub.c:5024 __kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024
Modules linked in:
CPU: 0 UID: 0 PID: 6488 Comm: syz-executor312 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024
lr : __do_kmalloc_node mm/slub.c:-1 [inline]
lr : __kvmalloc_node_noprof+0x3b4/0x640 mm/slub.c:5012
sp : ffff80009cfd7a90
x29: ffff80009cfd7ac0 x28: ffff0000dd52a120 x27: 0000000000412dc0
x26: 0000000000000178 x25: ffff7000139faf70 x24: 0000000000000000
x23: ffff800082f4cea8 x22: 00000000ffffffff x21: 000000010cd004a8
x20: ffff0000d75816c0 x19: ffff0000dd52a000 x18: 00000000ffffffff
x17: ffff800092f39000 x16: ffff80008adbe9e4 x15: 0000000000000005
x14: 1ffff000139faf1c x13: 0000000000000000 x12: 0000000000000000
x11: ffff7000139faf21 x10: 0000000000000003 x9 : ffff80008f27b938
x8 : 0000000000000002 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 00000000ffffffff x4 : 0000000000400dc0 x3 : 0000000200000000
x2 : 000000010cd004a8 x1 : ffff80008b3ebc40 x0 : 0000000000000001
Call trace:
__kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024 (P)
kvmalloc_array_node_noprof include/linux/slab.h:1065 [inline]
io_rsrc_data_alloc io_uring/rsrc.c:206 [inline]
io_clone_buffers io_uring/rsrc.c:1178 [inline]
io_register_clone_buffers+0x484/0xa14 io_uring/rsrc.c:1287
__io_uring_register io_uring/register.c:815 [inline]
__do_sys_io_uring_register io_uring/register.c:926 [inline]
__se_sys_io_uring_register io_uring/register.c:903 [inline]
__arm64_sys_io_uring_register+0x42c/0xea8 io_uring/register.c:903
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
which is due to offset + buffer_count being too large. The registration
code checks only the total count of buffers, but given that the indexing
is an array, it should also check offset + count. That can't exceed
IORING_MAX_REG_BUFFERS either, as there's no way to reach buffers beyond
that limit.
There's no issue with registrering a table this large, outside of the
fact that it's pointless to register buffers that cannot be reached, and
that it can trigger this kmalloc() warning for attempting an allocation
that is too large. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix memory leak due to multiple rx_stats allocation
rx_stats for each arsta is allocated when adding a station.
arsta->rx_stats will be freed when a station is removed.
Redundant allocations are occurring when the same station is added
multiple times. This causes ath12k_mac_station_add() to be called
multiple times, and rx_stats is allocated each time. As a result there
is memory leaks.
Prevent multiple allocations of rx_stats when ath12k_mac_station_add()
is called repeatedly by checking if rx_stats is already allocated
before allocating again. Allocate arsta->rx_stats if arsta->rx_stats
is NULL respectively.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Avoid divide by zero by initializing dummy pitch to 1
[Why]
If the dummy values in `populate_dummy_dml_surface_cfg()` aren't updated
then they can lead to a divide by zero in downstream callers like
CalculateVMAndRowBytes()
[How]
Initialize dummy value to a value to avoid divide by zero. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix uprobe pte be overwritten when expanding vma
Patch series "Fix uprobe pte be overwritten when expanding vma".
This patch (of 4):
We encountered a BUG alert triggered by Syzkaller as follows:
BUG: Bad rss-counter state mm:00000000b4a60fca type:MM_ANONPAGES val:1
And we can reproduce it with the following steps:
1. register uprobe on file at zero offset
2. mmap the file at zero offset:
addr1 = mmap(NULL, 2 * 4096, PROT_NONE, MAP_PRIVATE, fd, 0);
3. mremap part of vma1 to new vma2:
addr2 = mremap(addr1, 4096, 2 * 4096, MREMAP_MAYMOVE);
4. mremap back to orig addr1:
mremap(addr2, 4096, 4096, MREMAP_MAYMOVE | MREMAP_FIXED, addr1);
In step 3, the vma1 range [addr1, addr1 + 4096] will be remap to new vma2
with range [addr2, addr2 + 8192], and remap uprobe anon page from the vma1
to vma2, then unmap the vma1 range [addr1, addr1 + 4096].
In step 4, the vma2 range [addr2, addr2 + 4096] will be remap back to the
addr range [addr1, addr1 + 4096]. Since the addr range [addr1 + 4096,
addr1 + 8192] still maps the file, it will take vma_merge_new_range to
expand the range, and then do uprobe_mmap in vma_complete. Since the
merged vma pgoff is also zero offset, it will install uprobe anon page to
the merged vma. However, the upcomming move_page_tables step, which use
set_pte_at to remap the vma2 uprobe pte to the merged vma, will overwrite
the newly uprobe pte in the merged vma, and lead that pte to be orphan.
Since the uprobe pte will be remapped to the merged vma, we can remove the
unnecessary uprobe_mmap upon merged vma.
This problem was first found in linux-6.6.y and also exists in the
community syzkaller:
https://lore.kernel.org/all/000000000000ada39605a5e71711@google.com/T/ |
| A use-after-free vulnerability was discovered in Adobe Flash Player before 28.0.0.161. This vulnerability occurs due to a dangling pointer in the Primetime SDK related to media player handling of listener objects. A successful attack can lead to arbitrary code execution. This was exploited in the wild in January and February 2018. |
| Adobe Flash Player versions 29.0.0.171 and earlier have a Stack-based buffer overflow vulnerability. Successful exploitation could lead to arbitrary code execution in the context of the current user. |
| In the Linux kernel, the following vulnerability has been resolved:
media: imagination: fix a potential memory leak in e5010_probe()
Add video_device_release() to release the memory allocated by
video_device_alloc() if something goes wrong. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
In order to make sure callers of vmbus_establish_gpadl() and
vmbus_teardown_gpadl() don't return decrypted/shared pages to
allocators, add a field in struct vmbus_gpadl to keep track of the
decryption status of the buffers. This will allow the callers to
know if they should free or leak the pages. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc64/ftrace: fix clobbered r15 during livepatching
While r15 is clobbered always with PPC_FTRACE_OUT_OF_LINE, it is
not restored in livepatch sequence leading to not so obvious fails
like below:
BUG: Unable to handle kernel data access on write at 0xc0000000000f9078
Faulting instruction address: 0xc0000000018ff958
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP: c0000000018ff958 LR: c0000000018ff930 CTR: c0000000009c0790
REGS: c00000005f2e7790 TRAP: 0300 Tainted: G K (6.14.0+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 2822880b XER: 20040000
CFAR: c0000000008addc0 DAR: c0000000000f9078 DSISR: 0a000000 IRQMASK: 1
GPR00: c0000000018f2584 c00000005f2e7a30 c00000000280a900 c000000017ffa488
GPR04: 0000000000000008 0000000000000000 c0000000018f24fc 000000000000000d
GPR08: fffffffffffe0000 000000000000000d 0000000000000000 0000000000008000
GPR12: c0000000009c0790 c000000017ffa480 c00000005f2e7c78 c0000000000f9070
GPR16: c00000005f2e7c90 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 c00000005f3efa80 c00000005f2e7c60 c00000005f2e7c88
GPR24: c00000005f2e7c60 0000000000000001 c0000000000f9078 0000000000000000
GPR28: 00007fff97960000 c000000017ffa480 0000000000000000 c0000000000f9078
...
Call Trace:
check_heap_object+0x34/0x390 (unreliable)
__mutex_unlock_slowpath.isra.0+0xe4/0x230
seq_read_iter+0x430/0xa90
proc_reg_read_iter+0xa4/0x200
vfs_read+0x41c/0x510
ksys_read+0xa4/0x190
system_call_exception+0x1d0/0x440
system_call_vectored_common+0x15c/0x2ec
Fix it by restoring r15 always. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: appletb-kbd: fix "appletb_backlight" backlight device reference counting
During appletb_kbd_probe, probe attempts to get the backlight device
by name. When this happens backlight_device_get_by_name looks for a
device in the backlight class which has name "appletb_backlight" and
upon finding a match it increments the reference count for the device
and returns it to the caller. However this reference is never released
leading to a reference leak.
Fix this by decrementing the backlight device reference count on removal
via put_device and on probe failure. |
| In the Linux kernel, the following vulnerability has been resolved:
bcachefs: Check for journal entries overruning end of sb clean section
Fix a missing bounds check in superblock validation.
Note that we don't yet have repair code for this case - repair code for
individual items is generally low priority, since the whole superblock
is checksummed, validated prior to write, and we have backups. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs-tsm-report: Fix NULL dereference of tsm_ops
Unlike sysfs, the lifetime of configfs objects is controlled by
userspace. There is no mechanism for the kernel to find and delete all
created config-items. Instead, the configfs-tsm-report mechanism has an
expectation that tsm_unregister() can happen at any time and cause
established config-item access to start failing.
That expectation is not fully satisfied. While tsm_report_read(),
tsm_report_{is,is_bin}_visible(), and tsm_report_make_item() safely fail
if tsm_ops have been unregistered, tsm_report_privlevel_store()
tsm_report_provider_show() fail to check for ops registration. Add the
missing checks for tsm_ops having been removed.
Now, in supporting the ability for tsm_unregister() to always succeed,
it leaves the problem of what to do with lingering config-items. The
expectation is that the admin that arranges for the ->remove() (unbind)
of the ${tsm_arch}-guest driver is also responsible for deletion of all
open config-items. Until that deletion happens, ->probe() (reload /
bind) of the ${tsm_arch}-guest driver fails.
This allows for emergency shutdown / revocation of attestation
interfaces, and requires coordinated restart. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (ftsteutates) Fix TOCTOU race in fts_read()
In the fts_read() function, when handling hwmon_pwm_auto_channels_temp,
the code accesses the shared variable data->fan_source[channel] twice
without holding any locks. It is first checked against
FTS_FAN_SOURCE_INVALID, and if the check passes, it is read again
when used as an argument to the BIT() macro.
This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition.
Another thread executing fts_update_device() can modify the value of
data->fan_source[channel] between the check and its use. If the value
is changed to FTS_FAN_SOURCE_INVALID (0xff) during this window, the
BIT() macro will be called with a large shift value (BIT(255)).
A bit shift by a value greater than or equal to the type width is
undefined behavior and can lead to a crash or incorrect values being
returned to userspace.
Fix this by reading data->fan_source[channel] into a local variable
once, eliminating the race condition. Additionally, add a bounds check
to ensure the value is less than BITS_PER_LONG before passing it to
the BIT() macro, making the code more robust against undefined behavior.
This possible bug was found by an experimental static analysis tool
developed by our team. |
