| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: Fix simplification of devm_spi_register_controller
This reverts commit 59ebbe40fb51 ("spi: simplify
devm_spi_register_controller").
If devm_add_action() fails in devm_add_action_or_reset(),
devm_spi_unregister() will be called, it decreases the
refcount of 'ctlr->dev' to 0, then it will cause uaf in
the drivers that calling spi_put_controller() in error path. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: of: Fix refcount leak bug in of_get_regulation_constraints()
We should call the of_node_put() for the reference returned by
of_get_child_by_name() which has increased the refcount. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: tegra20-slink: fix UAF in tegra_slink_remove()
After calling spi_unregister_master(), the refcount of master will
be decrease to 0, and it will be freed in spi_controller_release(),
the device data also will be freed, so it will lead a UAF when using
'tspi'. To fix this, get the master before unregister and put it when
finish using it. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: wake up all waiters after z_erofs_lzma_head ready
When the user mounts the erofs second times, the decompression thread
may hung. The problem happens due to a sequence of steps like the
following:
1) Task A called z_erofs_load_lzma_config which obtain all of the node
from the z_erofs_lzma_head.
2) At this time, task B called the z_erofs_lzma_decompress and wanted to
get a node. But the z_erofs_lzma_head was empty, the Task B had to
sleep.
3) Task A release nodes and push nodes into the z_erofs_lzma_head. But
task B was still sleeping.
One example report when the hung happens:
task:kworker/u3:1 state:D stack:14384 pid: 86 ppid: 2 flags:0x00004000
Workqueue: erofs_unzipd z_erofs_decompressqueue_work
Call Trace:
<TASK>
__schedule+0x281/0x760
schedule+0x49/0xb0
z_erofs_lzma_decompress+0x4bc/0x580
? cpu_core_flags+0x10/0x10
z_erofs_decompress_pcluster+0x49b/0xba0
? __update_load_avg_se+0x2b0/0x330
? __update_load_avg_se+0x2b0/0x330
? update_load_avg+0x5f/0x690
? update_load_avg+0x5f/0x690
? set_next_entity+0xbd/0x110
? _raw_spin_unlock+0xd/0x20
z_erofs_decompress_queue.isra.0+0x2e/0x50
z_erofs_decompressqueue_work+0x30/0x60
process_one_work+0x1d3/0x3a0
worker_thread+0x45/0x3a0
? process_one_work+0x3a0/0x3a0
kthread+0xe2/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_register
Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node.
When breaking early from a for_each_available_child_of_node() loop,
we need to explicitly call of_node_put() on the child node.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: dts: qcom: replace gcc PXO with pxo_board fixed clock
Replace gcc PXO phandle to pxo_board fixed clock declared in the dts.
gcc driver doesn't provide PXO_SRC as it's a fixed-clock. This cause a
kernel panic if any driver actually try to use it. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: ocmem: Fix refcount leak in of_get_ocmem
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() will check NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: zynq: Fix refcount leak in zynq_get_revision
of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: OMAP2+: Fix refcount leak in omapdss_init_of
omapdss_find_dss_of_node() calls of_find_compatible_node() to get device
node. of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() in later error path and normal path. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: Add boundary check in put_entry()
Just like next_entry(), boundary check is necessary to prevent memory
out-of-bound access. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: fix memleak in security_read_state_kernel()
In this function, it directly returns the result of __security_read_policy
without freeing the allocated memory in *data, cause memory leak issue,
so free the memory if __security_read_policy failed.
[PM: subject line tweak] |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: bcm: Fix refcount leak in bcm_kona_smc_init
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/ext: Prevent update_locked_rq() calls with NULL rq
Avoid invoking update_locked_rq() when the runqueue (rq) pointer is NULL
in the SCX_CALL_OP and SCX_CALL_OP_RET macros.
Previously, calling update_locked_rq(NULL) with preemption enabled could
trigger the following warning:
BUG: using __this_cpu_write() in preemptible [00000000]
This happens because __this_cpu_write() is unsafe to use in preemptible
context.
rq is NULL when an ops invoked from an unlocked context. In such cases, we
don't need to store any rq, since the value should already be NULL
(unlocked). Ensure that update_locked_rq() is only called when rq is
non-NULL, preventing calling __this_cpu_write() on preemptible context. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon: fix divide by zero in damon_get_intervals_score()
The current implementation allows having zero size regions with no special
reasons, but damon_get_intervals_score() gets crashed by divide by zero
when the region size is zero.
[ 29.403950] Oops: divide error: 0000 [#1] SMP NOPTI
This patch fixes the bug, but does not disallow zero size regions to keep
the backward compatibility since disallowing zero size regions might be a
breaking change for some users.
In addition, the same crash can happen when intervals_goal.access_bp is
zero so this should be fixed in stable trees as well. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Disable INVLPGB on Zen2
AMD Cyan Skillfish (Family 17h, Model 47h, Stepping 0h) has an issue
that causes system oopses and panics when performing TLB flush using
INVLPGB.
However, the problem is that that machine has misconfigured CPUID and
should not report the INVLPGB bit in the first place. So zap the
kernel's representation of the flag so that nothing gets confused.
[ bp: Massage. ] |
| In the Linux kernel, the following vulnerability has been resolved:
lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users()
alloc_tag_top_users() attempts to lock alloc_tag_cttype->mod_lock even
when the alloc_tag_cttype is not allocated because:
1) alloc tagging is disabled because mem profiling is disabled
(!alloc_tag_cttype)
2) alloc tagging is enabled, but not yet initialized (!alloc_tag_cttype)
3) alloc tagging is enabled, but failed initialization
(!alloc_tag_cttype or IS_ERR(alloc_tag_cttype))
In all cases, alloc_tag_cttype is not allocated, and therefore
alloc_tag_top_users() should not attempt to acquire the semaphore.
This leads to a crash on memory allocation failure by attempting to
acquire a non-existent semaphore:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000001b: 0000 [#3] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x00000000000000d8-0x00000000000000df]
CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G D 6.16.0-rc2 #1 VOLUNTARY
Tainted: [D]=DIE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:down_read_trylock+0xaa/0x3b0
Code: d0 7c 08 84 d2 0f 85 a0 02 00 00 8b 0d df 31 dd 04 85 c9 75 29 48 b8 00 00 00 00 00 fc ff df 48 8d 6b 68 48 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 88 02 00 00 48 3b 5b 68 0f 85 53 01 00 00 65 ff
RSP: 0000:ffff8881002ce9b8 EFLAGS: 00010016
RAX: dffffc0000000000 RBX: 0000000000000070 RCX: 0000000000000000
RDX: 000000000000001b RSI: 000000000000000a RDI: 0000000000000070
RBP: 00000000000000d8 R08: 0000000000000001 R09: ffffed107dde49d1
R10: ffff8883eef24e8b R11: ffff8881002cec20 R12: 1ffff11020059d37
R13: 00000000003fff7b R14: ffff8881002cec20 R15: dffffc0000000000
FS: 00007f963f21d940(0000) GS:ffff888458ca6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f963f5edf71 CR3: 000000010672c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
codetag_trylock_module_list+0xd/0x20
alloc_tag_top_users+0x369/0x4b0
__show_mem+0x1cd/0x6e0
warn_alloc+0x2b1/0x390
__alloc_frozen_pages_noprof+0x12b9/0x21a0
alloc_pages_mpol+0x135/0x3e0
alloc_slab_page+0x82/0xe0
new_slab+0x212/0x240
___slab_alloc+0x82a/0xe00
</TASK>
As David Wang points out, this issue became easier to trigger after commit
780138b12381 ("alloc_tag: check mem_profiling_support in alloc_tag_init").
Before the commit, the issue occurred only when it failed to allocate and
initialize alloc_tag_cttype or if a memory allocation fails before
alloc_tag_init() is called. After the commit, it can be easily triggered
when memory profiling is compiled but disabled at boot.
To properly determine whether alloc_tag_init() has been called and its
data structures initialized, verify that alloc_tag_cttype is a valid
pointer before acquiring the semaphore. If the variable is NULL or an
error value, it has not been properly initialized. In such a case, just
skip and do not attempt to acquire the semaphore.
[harry.yoo@oracle.com: v3] |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: maps: Fix refcount leak in ap_flash_init
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: maps: Fix refcount leak in of_flash_probe_versatile
of_find_matching_node_and_match() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: Fix possible refcount leak in if_usb_probe()
usb_get_dev will be called before lbs_get_firmware_async which means that
usb_put_dev need to be called when lbs_get_firmware_async fails. |
