| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/fbdev-dma: Only set smem_start is enable per module option
Only export struct fb_info.fix.smem_start if that is required by the
user and the memory does not come from vmalloc().
Setting struct fb_info.fix.smem_start breaks systems where DMA
memory is backed by vmalloc address space. An example error is
shown below.
[ 3.536043] ------------[ cut here ]------------
[ 3.540716] virt_to_phys used for non-linear address: 000000007fc4f540 (0xffff800086001000)
[ 3.552628] WARNING: CPU: 4 PID: 61 at arch/arm64/mm/physaddr.c:12 __virt_to_phys+0x68/0x98
[ 3.565455] Modules linked in:
[ 3.568525] CPU: 4 PID: 61 Comm: kworker/u12:5 Not tainted 6.6.23-06226-g4986cc3e1b75-dirty #250
[ 3.577310] Hardware name: NXP i.MX95 19X19 board (DT)
[ 3.582452] Workqueue: events_unbound deferred_probe_work_func
[ 3.588291] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3.595233] pc : __virt_to_phys+0x68/0x98
[ 3.599246] lr : __virt_to_phys+0x68/0x98
[ 3.603276] sp : ffff800083603990
[ 3.677939] Call trace:
[ 3.680393] __virt_to_phys+0x68/0x98
[ 3.684067] drm_fbdev_dma_helper_fb_probe+0x138/0x238
[ 3.689214] __drm_fb_helper_initial_config_and_unlock+0x2b0/0x4c0
[ 3.695385] drm_fb_helper_initial_config+0x4c/0x68
[ 3.700264] drm_fbdev_dma_client_hotplug+0x8c/0xe0
[ 3.705161] drm_client_register+0x60/0xb0
[ 3.709269] drm_fbdev_dma_setup+0x94/0x148
Additionally, DMA memory is assumed to by contiguous in physical
address space, which is not guaranteed by vmalloc().
Resolve this by checking the module flag drm_leak_fbdev_smem when
DRM allocated the instance of struct fb_info. Fbdev-dma then only
sets smem_start only if required (via FBINFO_HIDE_SMEM_START). Also
guarantee that the framebuffer is not located in vmalloc address
space. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/probes: fix error check in parse_btf_field()
btf_find_struct_member() might return NULL or an error via the
ERR_PTR() macro. However, its caller in parse_btf_field() only checks
for the NULL condition. Fix this by using IS_ERR() and returning the
error up the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Do not unregister events twice
Nicolas reported that using:
# trace-cmd record -e all -M 10 -p osnoise --poll
Resulted in the following kernel warning:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1217 at kernel/tracepoint.c:404 tracepoint_probe_unregister+0x280/0x370
[...]
CPU: 0 PID: 1217 Comm: trace-cmd Not tainted 5.17.0-rc6-next-20220307-nico+ #19
RIP: 0010:tracepoint_probe_unregister+0x280/0x370
[...]
CR2: 00007ff919b29497 CR3: 0000000109da4005 CR4: 0000000000170ef0
Call Trace:
<TASK>
osnoise_workload_stop+0x36/0x90
tracing_set_tracer+0x108/0x260
tracing_set_trace_write+0x94/0xd0
? __check_object_size.part.0+0x10a/0x150
? selinux_file_permission+0x104/0x150
vfs_write+0xb5/0x290
ksys_write+0x5f/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7ff919a18127
[...]
---[ end trace 0000000000000000 ]---
The warning complains about an attempt to unregister an
unregistered tracepoint.
This happens on trace-cmd because it first stops tracing, and
then switches the tracer to nop. Which is equivalent to:
# cd /sys/kernel/tracing/
# echo osnoise > current_tracer
# echo 0 > tracing_on
# echo nop > current_tracer
The osnoise tracer stops the workload when no trace instance
is actually collecting data. This can be caused both by
disabling tracing or disabling the tracer itself.
To avoid unregistering events twice, use the existing
trace_osnoise_callback_enabled variable to check if the events
(and the workload) are actually active before trying to
deactivate them. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: qgroup: do not warn on record without old_roots populated
[BUG]
There are some reports from the mailing list that since v6.1 kernel, the
WARN_ON() inside btrfs_qgroup_account_extent() gets triggered during
rescan:
WARNING: CPU: 3 PID: 6424 at fs/btrfs/qgroup.c:2756 btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs]
CPU: 3 PID: 6424 Comm: snapperd Tainted: P OE 6.1.2-1-default #1 openSUSE Tumbleweed 05c7a1b1b61d5627475528f71f50444637b5aad7
RIP: 0010:btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs]
Call Trace:
<TASK>
btrfs_commit_transaction+0x30c/0xb40 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
? start_transaction+0xc3/0x5b0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
btrfs_qgroup_rescan+0x42/0xc0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
btrfs_ioctl+0x1ab9/0x25c0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
? __rseq_handle_notify_resume+0xa9/0x4a0
? mntput_no_expire+0x4a/0x240
? __seccomp_filter+0x319/0x4d0
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x5b/0x80
? syscall_exit_to_user_mode+0x17/0x40
? do_syscall_64+0x67/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd9b790d9bf
</TASK>
[CAUSE]
Since commit e15e9f43c7ca ("btrfs: introduce
BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting"), if
our qgroup is already in inconsistent state, we will no longer do the
time-consuming backref walk.
This can leave some qgroup records without a valid old_roots ulist.
Normally this is fine, as btrfs_qgroup_account_extents() would also skip
those records if we have NO_ACCOUNTING flag set.
But there is a small window, if we have NO_ACCOUNTING flag set, and
inserted some qgroup_record without a old_roots ulist, but then the user
triggered a qgroup rescan.
During btrfs_qgroup_rescan(), we firstly clear NO_ACCOUNTING flag, then
commit current transaction.
And since we have a qgroup_record with old_roots = NULL, we trigger the
WARN_ON() during btrfs_qgroup_account_extents().
[FIX]
Unfortunately due to the introduction of NO_ACCOUNTING flag, the
assumption that every qgroup_record would have its old_roots populated
is no longer correct.
Fix the false alerts and drop the WARN_ON(). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails
The spi controller supports 44-bit address space on AXI in DMA mode,
so set dma_addr_t width to 44-bit to avoid using a swiotlb mapping.
In addition, if dma_map_single fails, it should return immediately
instead of continuing doing the DMA operation which bases on invalid
address.
This fixes the following crash which occurs in reading a big block
from flash:
[ 123.633577] zynqmp-qspi ff0f0000.spi: swiotlb buffer is full (sz: 4194304 bytes), total 32768 (slots), used 0 (slots)
[ 123.644230] zynqmp-qspi ff0f0000.spi: ERR:rxdma:memory not mapped
[ 123.784625] Unable to handle kernel paging request at virtual address 00000000003fffc0
[ 123.792536] Mem abort info:
[ 123.795313] ESR = 0x96000145
[ 123.798351] EC = 0x25: DABT (current EL), IL = 32 bits
[ 123.803655] SET = 0, FnV = 0
[ 123.806693] EA = 0, S1PTW = 0
[ 123.809818] Data abort info:
[ 123.812683] ISV = 0, ISS = 0x00000145
[ 123.816503] CM = 1, WnR = 1
[ 123.819455] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000805047000
[ 123.825887] [00000000003fffc0] pgd=0000000803b45003, p4d=0000000803b45003, pud=0000000000000000
[ 123.834586] Internal error: Oops: 96000145 [#1] PREEMPT SMP |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: footbridge: fix PCI interrupt mapping
Since commit 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in
pci_device_probe()"), the PCI code will call the IRQ mapping function
whenever a PCI driver is probed. If these are marked as __init, this
causes an oops if a PCI driver is loaded or bound after the kernel has
initialised. |
| DragonflyDB Dragonfly before 1.27.0 allows authenticated users to cause a denial of service (daemon crash) via a crafted Redis command. The validity of the scan cursor was not checked. |
| flask-session-captcha is a package which allows users to extend Flask by adding an image based captcha stored in a server side session. In versions prior to 1.2.1, he `captcha.validate()` function would return `None` if passed no value (e.g. by submitting an having an empty form). If implementing users were checking the return value to be **False**, the captcha verification check could be bypassed. Version 1.2.1 fixes the issue. Users can workaround the issue by not explicitly checking that the value is False. Checking the return value less explicitly should still work. |
| The KVM subsystem in the Linux kernel through 4.2.6, and Xen 4.3.x through 4.6.x, allows guest OS users to cause a denial of service (host OS panic or hang) by triggering many #DB (aka Debug) exceptions, related to svm.c. |
| D-Link DIR-823G A1V1.0.2B05 was discovered to contain Null-pointer dereferences in sub_4484A8(). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| A vulnerability in the HTTP web interface for Cisco Wide Area Application Services (WAAS) could allow an unauthenticated, remote attacker to cause an HTTP Application Optimization (AO) related process to restart, causing a partial denial of service (DoS) condition. The vulnerability is due to lack of input validation of user-supplied input parameters within an HTTP request. An attacker could exploit this vulnerability by sending a crafted HTTP request through the targeted device. An exploit could allow the attacker to cause a DoS condition due to a process unexpectedly restarting. The WAAS could drop traffic during the brief time the process is restarting. Cisco Bug IDs: CSCvc63048. |
| A HTTP/2 implementation built using any version of the Python HPACK library between v1.0.0 and v2.2.0 could be targeted for a denial of service attack, specifically a so-called "HPACK Bomb" attack. This attack occurs when an attacker inserts a header field that is exactly the size of the HPACK dynamic header table into the dynamic header table. The attacker can then send a header block that is simply repeated requests to expand that field in the dynamic table. This can lead to a gigantic compression ratio of 4,096 or better, meaning that 16kB of data can decompress to 64MB of data on the target machine. |
| The RESTful control interface (aka RAPI or ganeti-rapi) in Ganeti before 2.9.7, 2.10.x before 2.10.8, 2.11.x before 2.11.8, 2.12.x before 2.12.6, 2.13.x before 2.13.3, 2.14.x before 2.14.2, and 2.15.x before 2.15.2, when used in SSL mode, allows remote attackers to cause a denial of service (resource consumption) via SSL parameter renegotiation. |
| A vulnerability in the Akamai Connect feature of Cisco Wide Area Application Services (WAAS) Appliances could allow an unauthenticated, remote attacker to cause a denial-of-service (DoS) condition on an affected device. The vulnerability is due to certain file-handling inefficiencies of the affected system. An attacker could exploit this vulnerability by directing client systems to access a corrupted file that the client systems cannot decompress correctly. A successful exploit could allow the attacker to cause the affected device to crash or hang unexpectedly and result in a DoS condition that may require manual intervention to regain normal operating conditions. Cisco Bug IDs: CSCve82472. |
| A vulnerability in the TCP normalizer of Cisco Adaptive Security Appliance (ASA) Software (8.0 through 8.7 and 9.0 through 9.6) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause Cisco ASA and FTD to drop any further incoming traffic on all interfaces, resulting in a denial of service (DoS) condition. The vulnerability is due to improper limitation of the global out-of-order TCP queue for specific block sizes. An attacker could exploit this vulnerability by sending a large number of unique permitted TCP connections with out-of-order segments. An exploit could allow the attacker to exhaust available blocks in the global out-of-order TCP queue, causing the dropping of any further incoming traffic on all interfaces and resulting in a DoS condition. Cisco Bug IDs: CSCvb46321. |
| Memory leak in ImageMagick allows remote attackers to cause a denial of service (memory consumption). |
| A vulnerability in the cluster database (CDB) management component of Cisco Expressway Series Software and Cisco TelePresence Video Communication Server (VCS) Software could allow an authenticated, remote attacker to cause the CDB process on an affected system to restart unexpectedly, resulting in a temporary denial of service (DoS) condition. The vulnerability is due to incomplete input validation of URL requests by the REST API of the affected software. An attacker could exploit this vulnerability by sending a crafted URL to the REST API of the affected software on an affected system. A successful exploit could allow the attacker to cause the CDB process on the affected system to restart unexpectedly, resulting in a temporary DoS condition. Cisco Bug IDs: CSCve77571. |
| A vulnerability in the detection engine parsing of Pragmatic General Multicast (PGM) protocol packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the Snort process unexpectedly restarting. The vulnerability is due to improper input validation of the fields in the PGM protocol packet. An attacker could exploit this vulnerability by sending a crafted PGM packet to the detection engine on the targeted device. An exploit could allow the attacker to cause a DoS condition if the Snort process restarts and traffic inspection is bypassed or traffic is dropped. This vulnerability affects Cisco Firepower System Software that has one or more file action policies configured and is running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series with FirePOWER Services; Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls; Advanced Malware Protection (AMP) for Networks, 7000 Series Appliances; Advanced Malware Protection (AMP) for Networks, 8000 Series Appliances; Firepower 4100 Series Security Appliances; FirePOWER 7000 Series Appliances; FirePOWER 8000 Series Appliances; Firepower 9300 Series Security Appliances; FirePOWER Threat Defense for Integrated Services Routers (ISRs); Industrial Security Appliance 3000; Sourcefire 3D System Appliances; Virtual Next-Generation Intrusion Prevention System (NGIPSv) for VMware. Fixed versions: 5.4.0.10 5.4.1.9 6.0.1.3 6.1.0 6.2.0. Cisco Bug IDs: CSCuz00876. |
| A vulnerability in Cisco Meeting Server versions prior to 2.2.2 could allow an authenticated, remote attacker to cause the system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to video calls being made on systems with a particular configuration. An attacker could exploit this by knowing a valid URI that directs to a Cisco Meeting Server. An attacker could then make a video call and cause the system to reload. Cisco Bug IDs: CSCve65931. |
| A HTTP/2 implementation built using any version of the Python priority library prior to version 1.2.0 could be targeted by a malicious peer by having that peer assign priority information for every possible HTTP/2 stream ID. The priority tree would happily continue to store the priority information for each stream, and would therefore allocate unbounded amounts of memory. Attempting to actually use a tree like this would also cause extremely high CPU usage to maintain the tree. |
