Export limit exceeded: 53059 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (616 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-88367 | 1 Memononen | 1 Nanosvg | 2026-09-27 | 6.5 Medium |
| NanoSVG 239e102ec contains an incorrect numeric conversion vulnerability in nsvg__curveDivs() during SVG stroke rasterization. A specially crafted SVG document containing an extremely large stroke-width can cause floating-point rounding to produce a zero subdivision angle. The subsequent arc division yields infinity, which is converted to int without range validation, resulting in undefined behavior and process termination, leading to denial of service. | ||||
| CVE-2026-88362 | 1 Ghostscript | 1 Mujs | 2026-09-27 | 7.5 High |
| MuJS e892c9fdb contains an incorrect numeric conversion vulnerability in jsR_isindex() in jsrun.c. A specially crafted JavaScript input containing an excessively large numeric array index can cause an out-of-range floating-point value to be converted to an integer without proper range validation. This results in undefined behavior and can cause process termination, leading to denial of service. | ||||
| CVE-2026-88368 | 1 Memononen | 1 Nanosvg | 2026-09-27 | 7.5 High |
| NanoSVG commit 239e102ec contains an incorrect numeric conversion vulnerability in the rasterizer's nsvg__addActive() function. A specially crafted SVG document containing sufficiently large geometry coordinates can cause fixed-point-scaled edge coordinates to exceed the range representable by int. The rasterizer subsequently converts these values to int without range validation, resulting in undefined behavior and possible process termination, leading to denial of service. | ||||
| CVE-2026-97550 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix unit conversions in per_binval computation LOLLM noticed that we're doing the unit conversion in the per_binval computation backwards -- xfs_buf_inval_log_space's second parameter is supposed to be in bytes, but max_binval is in units of fsblocks. Hence the conversion should be FSB -> B, not the other way around. | ||||
| CVE-2026-98148 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/gud: validate GUD_ROTATION_0 is present in supported rotations The rotation argument to drm_plane_create_rotation_property() is set to DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as the supported_rotations argument. The driver never validates that GUD_ROTATION_0 is present, so a device that omits it from its GUD_PROPERTY_ROTATION triggers the WARN_ON(rotation & ~supported_rotations) in drm_plane_create_rotation_property() Fix this by skipping the creation of rotation property if the device doesn't have the GUD_ROTATION_0 bit | ||||
| CVE-2026-97520 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: move quota_init qc iterator increment Move qc++ from the loop body into the for-loop increment expression in gfs2_quota_init(). This keeps iterator progression explicit and avoids mixing pointer advance with duplicate-slot handling in the loop body. | ||||
| CVE-2026-18459 | 1 Rti | 1 Connext Professional | 2026-09-22 | N/A |
| Incorrect Calculation vulnerability in RTI Connext Professional (Core Libraries) allows Abuse Existing Functionality. This issue affects Connext Professional: from 7.4.0 before 7.7.0.1, from 7.0.0 before 7.3.1.6, from 6.1.0 before 6.1.*, from 6.0.0 before 6.0.*, from 5.3.0 before 5.3.*, from 5.2.0 before 5.2.*, from 4.1x before 5.1.*. | ||||
| CVE-2026-18458 | 1 Rti | 1 Connext Professional | 2026-09-22 | N/A |
| Out-of-bounds Read, Function Call With Incorrect Number of Arguments, Access of Resource Using Incompatible Type ('Type Confusion') vulnerability in RTI Connext Professional (Core Libraries) allows Overread Buffers. This issue affects Connext Professional: from 7.4.0 before 7.7.0.1, from 7.3.0 before 7.3.1.6, from 6.1.2.21 before 6.1.*. | ||||
| CVE-2026-11389 | 1 Rti | 1 Connext Professional | 2026-09-22 | N/A |
| Out-of-bounds Read, Function Call With Incorrect Number of Arguments, Access of Resource Using Incompatible Type ('Type Confusion') vulnerability in RTI Connext Professional (Core Libraries) allows Overread Buffers. This issue affects Connext Professional: from 7.4.0 before 7.7.0.1, from 7.3.0 before 7.3.1.6. | ||||
| CVE-2026-84963 | 1 Mongodb | 1 C Driver | 2026-09-22 | 5.3 Medium |
| An incorrect numeric conversion in the JSON parsing component of the MongoDB C Driver's BSON library may cause an unusually large text value to be silently shortened, or the corresponding field to be omitted, while the parsing operation still reports success and returns no error. An unauthenticated party who can supply the input processed by an application that uses this component may cause that application to hold data that does not match what was submitted, which may result in unintended alteration of data. | ||||
| CVE-2026-84966 | 1 Mongodb | 2 C++ Driver, C\+\+ Driver | 2026-09-22 | 5.1 Medium |
| An incorrect numeric type conversion in the BSON document building component of the MongoDB C++ Driver may cause a length value to be interpreted incorrectly. When an application supplies an extremely large, non-terminated field name to the builder, the library may read memory outside the intended buffer and terminate the calling process. No authentication is required, but the calling application must pass the oversized name in a specific form. | ||||
| CVE-2026-90042 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: properly decrypt filenames in vmalloc() buffers The fscrypt subsystem uses the scatterlist crypto API, inheriting its requirement that any buffers are in the linear mapping region. However, the messenger client uses kvmalloc() to create buffers for messages, which will occasionally place those buffers in the vmalloc() region when physical memory fragmentation doesn't permit a large enough kmalloc(). The various callers of ceph_fname_to_usr() directly pass (slices of) raw messages from the MDS without considering that the messages may be in vmalloc() buffers, resulting in oopses especially on non-x86 platforms (see 'Closes:' for more details and a reproducer). Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated fname->ctext, fname->name, and/or oname->name buffers, using `tname` (which, when non-null, must be a linear address; when null, is briefly allocated as necessary) as a bounce buffer to avoid passing any inappropriate addresses to fscrypt_fname_disk_to_usr(). Additionally change parse_reply_info_readdir() -- the only function to supply its own `tname` -- to follow the new "tname must never come from vmalloc()" rule by passing NULL when the message is not in the linear region. Though this causes a per-dentry kmalloc()+kfree(), this overhead exists only when processing the minority of messages that spill into vmalloc(). My (crude) testing puts this at only about 1 in 8,000 readdir messages. Still, if the overhead proves unreasonable in the future, it is easy enough to mitigate: a future change could allocate a bounce buffer in parse_reply_info_readdir() and use that as `tname` instead. | ||||
| CVE-2026-65390 | 1 Apple | 8 Ios And Ipados, Ipados, Iphone Os and 5 more | 2026-09-20 | 8.8 High |
| An integer overflow was addressed with improved input validation. This issue is fixed in Safari 26.6.1, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, tvOS 27, visionOS 27, watchOS 27. Processing maliciously crafted web content may lead to memory corruption. | ||||
| CVE-2026-90063 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virtio-net: Ensure that TCP packets don't overflow gso_segs The user can specify any gso_size in a packet crafted with an AF_PACKET PACKET_VNET_HDR socket, even smaller than TCP_MIN_GSO_SIZE = 8. At the same time, GSO_MAX_SIZE = 8 * GSO_MAX_SEGS = 8 * 65535. When the user crafts a packet with gso_size < 8, there is a risk for partial GSO to overflow the 16-bit gso_segs field when dividing the SKB length by gso_size. Adjust gso_size of TCP packets to be at least TCP_MIN_GSO_SIZE = 8. Keep gso_size of UDP GSO packets, as gso_size=1 is valid and explicitly tested at tools/testing/selftests/net/tun.c:649. | ||||
| CVE-2026-90059 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: restore NET_IP_ALIGN in the RX DMA offset Since the RX path was converted to zero-copy, the page pool page is handed to the stack directly as the skb head, and the offset the DMA engine writes at is what determines the alignment of the packet headers. Before the conversion the payload was copied into an skb obtained from napi_alloc_skb(), which reserves NET_SKB_PAD + NET_IP_ALIGN. The conversion moved the headroom into stmmac_rx_offset() but did not carry over NET_IP_ALIGN, so on architectures where NET_IP_ALIGN is 2 the IP header now lands misaligned: 64 (NET_SKB_PAD) + 14 (ethernet) + 20 (IP) = 98 Same for the XDP branch: 256 (XDP_PACKET_HEADROOM) + 14 (ethernet) + 20 (IP) = 290 On ARM32 this is fatal, because ldm and ldrd trap on unaligned addresses even when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set. Any received echo request panics the machine, e.g: Unhandled fault: alignment exception (0x001) at 0x81873062 Internal error: : 1 [#1] SMP ARM Hardware name: Altera SOCFPGA Arria10 PC is at icmp_echo+0x38/0xa8 LR is at icmp_rcv+0x22c/0x370 Call trace: icmp_echo from icmp_rcv+0x22c/0x370 icmp_rcv from ip_protocol_deliver_rcu+0x2c/0x224 ip_protocol_deliver_rcu from ip_local_deliver+0xc8/0x1a0 ip_local_deliver from ip_sublist_rcv_finish+0x3c/0x50 ip_sublist_rcv_finish from ip_list_rcv_finish+0x110/0x118 ip_list_rcv_finish from ip_list_rcv+0xc8/0xdc ip_list_rcv from __netif_receive_skb_list_core+0x170/0x1c0 ... napi_complete_done from stmmac_napi_poll_rx+0xcb0/0x1030 Code: e24dd068 e59020a0 e28dc010 e0822001 (e8920003) Kernel panic - not syncing: Fatal exception in interrupt The faulting instruction is the ldm of *icmp_hdr(skb) in icmp_echo(). Fix by adding NET_IP_ALIGN back to the RX offset, which restores the alignment the stack used to get. Note that commit a955318fe67e ("stmmac: align RX buffers") made a similar change in 2021 and was reverted by commit 12d125b4574b ("stmmac: Revert "stmmac: align RX buffers"") because it caused packet corruption. That patch raised the offset from 0 without adjusting the buffer size accounting, so the DMA engine could arguably write past the end of the RX buffers, though this was never root caused. Commit df542f669307 ("net: stmmac: Switch to zero-copy in non-XDP RX path") since derives the page pool allocation from stmmac_rx_offset(), so the extra bytes are accounted for. | ||||
| CVE-2026-90075 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_codel: clamp default quantum and mtu fq_codel_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which overflows the signed flow->deficit to INT_MIN in fq_codel_dequeue(), causing an infinite loop and soft lockup. Emulate fq_codel_change() and constrain to [256, FQ_CODEL_QUANTUM_MAX]. The same unclamped psched_mtu() is assigned to q->cparams.mtu a bit below, and fq_codel_change() never updates it. codel_should_drop() tests "*backlog <= params->mtu"; with mtu == 0x80000000 (~2 GiB) and the default 32 MiB memory_limit, the test is always true, so CoDel is silently and completely disabled (no drops, no ECN). Declare a single clamped mtu and assign both q->quantum and q->cparams.mtu from it, which also removes the double psched_mtu() call. Conditions to recreate the bug: a device whose MTU (plus hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy device with max_mtu == 0 accepting MTU 2147483634). Requires CAP_NET_ADMIN in a user namespace. | ||||
| CVE-2026-90073 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: hhf: clamp quantum before hhf_change() to avoid overflow hhf_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) with no overflow check. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes weight * quantum overflow the signed deficit in hhf_dequeue(), spinning forever. Clamp q->quantum before hhf_change() so both the opt and !opt paths see a sane quantum. Without this, bare "tc qdisc add ... hhf" succeeds with a clamped quantum but "tc qdisc add ... hhf limit 1000" (any option present) fails with -EINVAL because hhf_change() re-validates the unclamped default (sch_hhf.c:559). 256 matches fq_codel's floor and is a sane minimum for a DRR quantum. Conditions to recreate the bug: a device whose MTU (plus hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy device with max_mtu == 0 accepting MTU 2147483634). Requires CAP_NET_ADMIN in a user namespace. | ||||
| CVE-2026-90435 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix integer overflow of user QP buffer size set_user_buf_size() computes the QP buffer size by left-shifting the user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers. A sufficiently large rq.wqe_cnt causes signed integer overflow, which is undefined behavior, and yields a small or negative buf_size, causing ib_umem_get() to map a buffer smaller than the hardware will actually write into. Replace the shifts and addition with check_shl_overflow() and check_add_overflow(), rejecting invalid user inputs. Moreover, guard the identical shift computing qp->sq.offset in _create_user_qp() before set_user_buf_size() is reached. | ||||
| CVE-2026-90200 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix integer overflow in MFT cluster validation In ntfs_init_from_boot(), the boot sector's MFT cluster numbers are validated against the volume size with: if (mlcn * sct_per_clst >= sectors || mlcn2 * sct_per_clst >= sectors) goto out; mlcn and mlcn2 are u64 fields read directly from the boot sector. sct_per_clst is bounded above by 4096 (true_sectors_per_clst() plus the is_power_of_2() check below it), but the multiplication is done in u64 and wraps when mlcn (or mlcn2) is large enough -- e.g. mlcn near 2^62 with sct_per_clst == 4 wraps to 0, which compares below any non-zero 'sectors', so the check is bypassed and the malformed record is accepted. The accepted mlcn is then used unchanged in sbi->mft.lbo = mlcn << cluster_bits; In practice the resulting reads fail at the block layer (sb_bread() returns NULL via grow_buffers()'s check_mul_overflow() guard), so today this manifests as mount failing in odd places rather than as something more dangerous, but the validation step is still wrong and there is no reason for callers to rely on the block layer to catch a value that should never have been accepted in the first place. Use check_mul_overflow() to compute the two sector positions and fail the mount if either multiplication wraps; this preserves the existing semantics (mlcn * sct_per_clst >= sectors) instead of switching to division (mlcn >= sectors / sct_per_clst), which would tighten the check at edge cases where 'sectors' is not a multiple of sct_per_clst. The check_*_overflow() style is the one ntfs3 already uses for similar on-disk arithmetic in fs/ntfs3/run.c. | ||||
| CVE-2026-90279 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: round bitmap stripes with sector division raid5_bitmap_sector_map() aligns the array range to full RAID5 stripe widths before converting it to component sectors. That width is chunk_sectors multiplied by the number of data disks, and it is not always a power of two. Reproduce with a 4-disk RAID5, 1024-sector chunks, and three data disks. The full-stripe width is 3072 sectors. For a one-sector write at array sector 3072, correct rounding gives array range [3072, 6144), which maps to component range [1024, 2048). The old round_down()/round_up() logic instead gives [1024, 4096), which maps to [0, 1024). Use sector_div() based arithmetic so the rounded range is aligned to the actual RAID5 stripe width. The deterministic mapper test now reports the fixed component range as [1024, 2048), while the old mask-based range was [0, 1024). | ||||