| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A specific version of the Node.js mongodb-client-encryption module does not perform correct validation of the KMS server’s certificate. This vulnerability in combination with a privileged network position active MITM attack could result in interception of traffic between the Node.js driver and the KMS service rendering client-side field level encryption (CSFLE) ineffective. This issue was discovered during internal testing and affects mongodb-client-encryption module version 1.2.0, which was available from 2021-Jan-29 and deprecated in the NPM Registry on 2021-Feb-04. This vulnerability does not impact driver traffic payloads with CSFLE-supported key services from applications residing inside the AWS, GCP, and Azure nework fabrics due to compensating controls in these environments. This issue does not impact driver workloads that don’t use Field Level Encryption. This issue affect MongoDB Node.js Driver mongodb-client-encryption module version 1.2.0 |
| When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool. |
| Kuma is a modern Envoy-based service mesh that can run on every cloud across both Kubernetes and VMs. Prior to 2.7.26, 2.9.16, 2.11.14, 2.12.11, and 2.13.7, a kumactl profile manually configured for an HTTPS control plane without --ca-cert-file disables TLS peer verification and sends API tokens over the unverified connection. An attacker on the network path can intercept user or administrator API tokens and act against the control plane as the compromised user. The default local profile is unaffected because it uses plain HTTP. This issue is fixed in versions 2.7.26, 2.9.16, 2.11.14, 2.12.11, and 2.13.7. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to protection mechanism bypass. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Certificate Validation vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to server-side request forgery. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access. |
| DIRAC is an interware, meaning a software framework for distributed computing. Prior to versions 8.0.79, 9.0.22, and 9.1.10, WorkloadManagementSystem/Utilities/PilotWrapper.py pilotWrapperScript uses ssl._create_unverified_context to download the second-stage pilot.tar archive without TLS certificate verification and downloads the reference checksum through the same unvalidated channel. An attacker able to redirect or intercept a grid site's network traffic through DNS or routing manipulation can substitute both the executable pilot code and its checksum, causing arbitrary code to run in the pilot context with access to pilot proxy credentials. The fixed implementation validates the server certificate through system trust and X509_CERT_DIR or the grid certificate directory. This issue is fixed in versions 8.0.79, 9.0.22, and 9.1.10. |
| Socket Firewall (socketdev/socket-registry-firewall) in registry mode before 2.0.0 does not verify upstream TLS certificates by default. When the api_ssl_verify and upstream_ssl_verify configuration keys are omitted from socket.yml, the generated configuration sets SOCKET_API_SSL_VERIFY='false' and UPSTREAM_SSL_VERIFY='false', and the OpenResty/Lua HTTP client used for outbound requests accepts any certificate, including self-signed and otherwise untrusted certificates, without validating the chain. An attacker positioned to intercept traffic between Socket Firewall and the Socket API or an upstream package registry can present a crafted certificate and modify responses in transit, including substituting malicious package content or altering the allow/block decisions the firewall enforces. Setting api_ssl_verify: true and upstream_ssl_verify: true enables verification; however, in versions before 1.1.334, the generated nginx configuration did not emit lua_ssl_trusted_certificate, and thus verification could not be used successfully without manually patching the generated configuration. Version 2.0.0 changes the default for both settings to true. |
| ASE/Kalkitech ASE2000 V2 Communication Test Set 2.35 through 2.37 on Windows contains an improper certificate validation vulnerability in the IEC 60870-5-104 TLS client (Task Mode). This allows a network-positioned attacker to bypass certificate validation via a certificate with multiple simultaneous faults, enabling a Man-in-the-Middle attack on protected communications. |
| Kuma is a modern Envoy-based service mesh that can run on every cloud across both Kubernetes and VMs. Prior to 2.7.26, 2.9.16, 2.11.14, 2.12.11, and 2.13.7, Universal mode kuma-dp connections to an HTTPS control plane disable TLS peer verification when --ca-cert-file is not supplied and KUMA_CONTROL_PLANE_CA_CERT is unset. The dataplane authentication token is sent over the unverified connection, allowing an on-path attacker to intercept the token, impersonate the control plane, inject a forged bootstrap configuration, and take over the proxy. Standard Kubernetes installations created by kumactl install control-plane or the official Helm chart are unaffected because the mutating admission webhook injects KUMA_CONTROL_PLANE_CA_CERT into each sidecar. This issue is fixed in versions 2.7.26, 2.9.16, 2.11.14, 2.12.11, and 2.13.7. |
| undici's BalancedPool constructor passes its entire options object through an internal deep-clone that serializes and reparses the value as JSON. Because JSON cannot represent functions, any function-valued TLS option, such as a caller-supplied checkServerIdentity callback or a custom connector inside the connect option, is silently discarded before it reaches the TLS layer. As a result a peer whose certificate the application's custom checkServerIdentity was written to reject, but which still passes Node's default hostname and chain checks, is accepted when reached through BalancedPool. The Client, Pool, and Agent dispatchers are not affected because they extract the connect and tls options before cloning. This affects undici versions from 7.24.1 up to 7.29.1 and from 8.0.0 up to 8.10.2, and only when the application supplies a function-valued connect or tls option to BalancedPool. Users should upgrade to undici 7.29.1 or 8.10.2. |
| Previously, a revoked 'SignatureKey' belonging to a CA was not correctly checked for revocation. Now, both the 'key' and 'key.SignatureKey' are checked for @revoked. |
| When verifying a certificate chain which contains a certificate containing multiple email address constraints which share common local portions but different domain portions, these constraints will not be properly applied, and only the last constraint will be considered. |
| With the wolfSSL backend, when CA caching is enabled and an
`CURLOPT_SSL_CTX_FUNCTION` callback replaces the trust store, libcurl can
silently reinstall the cached store after the callback returns. A certificate
trusted by the cached store but rejected by the callback-selected store is
then incorrectly accepted. |
| A flaw in libcurl makes it wrongly reuse an existing HTTPS connection setup
for a given hostname even when using a different Native CA Store setting
(`CURLSSLOPT_NATIVE_CA`) than when the connection was created. |
| When `CURLOPT_PINNEDPUBLICKEY` is configured alongside options that disable
standard peer verification (`CURLOPT_SSL_VERIFYPEER = 0` and
`CURLOPT_SSL_VERIFYHOST = 0`), libcurl fails to enforce public key pinning on
connections established without a presented server certificate. Bypassing the
pinning check under these disabled-verification conditions allows
unauthenticated connections to succeed when they should be rejected. |
| In this scenario, libcurl first uses a proper HTTP/3 server for the initial
transfers, and when it makes a second transfer to the same site it has been
replaced by the attacker's impostor machine - without a valid certificate.
When libcurl returns to the hostname the second time with a cached SSL session
(`CURLOPT_SSL_SESSIONID_CACHE` is not disabled) and early data enabled (the
`CURLSSLOPT_EARLYDATA` bit is set in `CURLOPT_SSL_OPTIONS`), libcurl might
send off the second request's bytes on that new connection *before* enforcing
the certificate verification failure. Potentially leaking sensitive
information. |
| When a user invokes curl using a schemeless URL combined with
`--proto-default` sftp (or scp), a disconnect occurs between the tool layer
and libcurl. The tool layer incorrectly infers the URL scheme, which
erroneously bypasses the initialization of critical SSH security options like
CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256 and CURLOPT_SSH_KNOWNHOSTS. Conversely, the
libcurl runtime successfully honors CURLOPT_DEFAULT_PROTOCOL and establishes
the connection via SFTP/SCP as specified. Because the tool layer skipped the
security configuration, these SSH host verification options are silently
omitted, causing curl to connect to an unverified SSH remote host without
throwing an error. |
