| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
A circular locking dependency involves INODE_ALLOC_SYSTEM_INODE,
EXTENT_ALLOC_SYSTEM_INODE, and ORPHAN_DIR_SYSTEM_INODE.
1. ocfs2_mknod() acquires INODE_ALLOC then EXTENT_ALLOC.
2. ocfs2_dio_end_io_write() acquires EXTENT_ALLOC for unwritten
extents, then ORPHAN_DIR via ocfs2_del_inode_from_orphan() while still
holding EXTENT_ALLOC.
3. ocfs2_wipe_inode() acquires ORPHAN_DIR then INODE_ALLOC via
ocfs2_remove_inode.
Break the cycle in ocfs2_dio_end_io_write() by freeing the allocation
contexts (releasing EXTENT_ALLOC) before acquiring ORPHAN_DIR.
WARNING: possible circular locking dependency detected
------------------------------------------------------
is trying to acquire lock:
ffff8881e78b33a0
(&ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE]){+.+.}-{4:4}, at:
ocfs2_evict_inode+0x1539/0x43b0 fs/ocfs2/inode.c:1299
but task is already holding lock:
ffff8881e78b4fa0
(&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]){+.+.}-{4:4}, at:
ocfs2_evict_inode+0xe97/0x43b0 fs/ocfs2/inode.c:1299
the existing dependency chain (in reverse order) is:
-> #2 (&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]){+.+.}-{4:4}:
inode_lock include/linux/fs.h:1029 [inline]
ocfs2_del_inode_from_orphan+0x12e/0x7a0 fs/ocfs2/namei.c:2728
ocfs2_dio_end_io+0xf9c/0x1370 fs/ocfs2/aops.c:2418
dio_complete+0x25b/0x790 fs/direct-io.c:281
-> #1 (&ocfs2_sysfile_lock_key[EXTENT_ALLOC_SYSTEM_INODE]){+.+.}-{4:4}:
inode_lock include/linux/fs.h:1029 [inline]
ocfs2_reserve_suballoc_bits+0x16d/0x4840 fs/ocfs2/suballoc.c:882
ocfs2_reserve_new_metadata_blocks+0x415/0x9a0
fs/ocfs2/suballoc.c:1078
ocfs2_mknod+0x10f3/0x2260 fs/ocfs2/namei.c:351
-> #0 (&ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE]){+.+.}-{4:4}:
__lock_acquire+0x15a5/0x2cf0 kernel/locking/lockdep.c:5237
lock_acquire+0x106/0x350 kernel/locking/lockdep.c:5868
down_write+0x96/0x200 kernel/locking/rwsem.c:1625
inode_lock include/linux/fs.h:1029 [inline]
ocfs2_remove_inode fs/ocfs2/inode.c:733 [inline]
ocfs2_wipe_inode fs/ocfs2/inode.c:896 [inline]
ocfs2_delete_inode fs/ocfs2/inode.c:1157 [inline]
ocfs2_evict_inode+0x1539/0x43b0 fs/ocfs2/inode.c:1299
Chain exists of:
&ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE] -->
&ocfs2_sysfile_lock_key[EXTENT_ALLOC_SYSTEM_INODE] -->
&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]);
lock(&ocfs2_sysfile_lock_key[EXTENT_ALLOC_SYSTEM_INODE]);
lock(&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]);
lock(&ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE]);
*** DEADLOCK *** |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx5: Properly support implicit ODP rereg_mr
Due to all the child mkeys in the implicit ODP configuration we cannot
change anything in place for the parent mkey. Instead the whole thing
needs to be rebuilt if any change is requested. If the user does not
specify a translation then force the implicit values which will then fall
through the logic into mlx5_ib_reg_user_mr() to allocate a completely new
MR.
Since implicit children were also touching the mr->pd, this removes
another case where the access was racy. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix buffer head management in ocfs2_read_blocks()
In ocfs2_read_blocks(), caller should't assume that buffer head returned
by 'sb_getblk()' is exclusively owned and so 'put_bh()' always drops
b_count from 1 to 0. If it is not so, buffer head remains on hold and
likely to be returned by the next call to 'sb_getblk()' unchanged - that
is, with BH_Uptodate bit set even if it has failed validation previously,
thus allowing to insert that buffer head into OCFS2 metadata cache and
submit it to upper layers. To avoid such a scenario, BH_Uptodate should
be cleared immediately after 'validate()' callback has detected some data
inconsistency. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tegra: gr2d/gr3d: Initialize address register map before HOST1X client is registered
The host1x_client_register() function is called just prior to register map
initialization loop, making the device available to userspace. This may
result in userspace attempting to submits a job before the register map is
initialized. Address this by moving register initialization before host1x
client registration. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: use check_add_overflow for shader size+offset bound
vmw_shader_define() validates the user-supplied shader window against
its backing buffer with
(u64)buffer->tbo.base.size < (u64)size + (u64)offset
drm_vmw_shader_create_arg::offset is __u64 in the uapi; when it is
near U64_MAX the unsigned addition wraps and the resulting tiny value
passes the check. The unbounded offset is then stored in
res->guest_memory_offset and forwarded to host SVGA shader-create
commands.
Use check_add_overflow() to detect the wrap and compare the resulting
endpoint against the buffer size. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Validate AIBV and AISB before pinning guest pages
The AIBV holds one bit per MSI-X vector for a given function. The size of
the bit vector is derived from the NOI and the AIBVO. If the size of the
AIBV exceeds a single page boundary, then reject the request as we cannot
safely pin the guest AIBV.
Similarly reject the request if the AISB address is not 8-byte aligned as
the architecture requires doubleword alignment for the summary bit address.
Since the AISBO can address up to 64 bits, the size of the AISB can only be
8 bytes for the function. This also ensures the AISB doesn't exceed a
single page boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix wrong hwpt passed to iommufd_auto_response_faults on replace
iommufd_hwpt_replace_device() calls:
iommufd_auto_response_faults(hwpt, old_handle);
passing the *new* hwpt together with the handle of
the device's *old* domain. This should be a parameter mismatch:
1. Semantically, iommufd_auto_response_faults(x, handle) scans
x->fault's deliver list and response xarray for groups matching
"handle". A group is queued under the hwpt that was attached at
fault-delivery time. old_handle is fetched *before* the domain switch,
so its group lives on old->fault, not on the new hwpt->fault.
2. Historically, the first argument was "old". The routine was
introduced by commit b7d8833677ba ("iommufd: Fault-capable hwpt
attach/detach/replace") as __fault_domain_replace_dev() in
fault.c, correctly calling iommufd_auto_response_faults(old, curr).
Commit fb21b1568ada ("iommufd: Make attach_handle generic than
fault specific") moved this into iommufd_hwpt_replace_device() in
device.c and swapped it to "hwpt". This should be a refactor regression,
not an intentional change.
Fix this by passing "old" instead. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: clear PG_private_2 on copy-to-cache append failure
netfs_pgpriv2_copy_to_cache() marks the folio with PG_private_2 before
netfs_pgpriv2_copy_folio() appends it to the copy-to-cache rolling
buffer.
If the append fails, the folio is not queued for cache writeback, so
the PG_private_2 state and its reference must be released immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Make UMP message size check more robust
If message offset was larger than the buffer length the size
check will pass incorrectly. Refactor the check such that it is
more robust to invalid sizes. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tap: fix wrong transport_header when sending VLAN-tagged frame
In tap_get_user_xdp(), when processing a VLAN-tagged frame (e.g.
ETH_P_8021Q), skb_set_network_header() is called first to advance
network_header past the VLAN tag to the inner protocol header.
skb_probe_transport_header() is then called with skb->protocol still
set to ETH_P_8021Q, while nhoff (derived from skb_network_offset())
already points past the VLAN tag to the inner protocol header.
In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff
points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it
reads a struct vlan_hdr at the current nhoff via __skb_header_pointer(),
but that offset contains the inner protocol header (e.g. an IP header).
The bytes are misinterpreted as a VLAN header, yielding a garbage
encapsulated EtherType that matches no known protocol. The dissector
returns false, so skb_probe_transport_header() never calls
skb_set_transport_header(), leaving transport_header at its uninitialized
sentinel value (~0U).
Move skb_set_network_header() to after skb_probe_transport_header(). At
the time skb_probe_transport_header() is called, network_header still
points to the VLAN header (offset ETH_HLEN), so nhoff is correct and the
flow dissector can parse the VLAN header, extract the inner EtherType,
and advance nhoff to the inner protocol header, allowing transport_header
to be set correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: lpass-wsa-macro: Fix enum kcontrol accesses
EAR SPKR PA Gain" and the four "WSA RX* Mux" controls are enumerated,
but their get and put callbacks access the value through
ucontrol->value.integer.value[0] (a long) instead of
ucontrol->value.enumerated.item[0] (an unsigned int).
This same pattern was fixed in the sibling drivers by
commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array
out of bounds for enum type") and
commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array
out of bounds for enum type"), but wsa-macro was missed.
On 64-bit kernels with CONFIG_SND_CTL_DEBUG this trips the elem value
sanity check and every read of these controls fails with -EINVAL. |
| Frappe CRM is an open-source customer relationship management tool. Prior to version 1.73.0, there is an authentication bypass vulnerability via logged invitation keys in crm/api. This issue has been patched in version 1.73.0. |
| In Ignition 8.1.53 and earlier, the Gateway "Create Project Role(s)" setting shipped blank, which permitted any authenticated user to create projects (if they can execute gateway scripts). Ignition 8.1.54 restricts project creation to Designer sessions and no longer relies on this setting. The 8.3 series is not affected. |
| An issue in the NetStaX EtherNet/IP Stack prior to v5.6.1 could allow a large Class 3 explicit-message request to exceed the application-side receive buffer without generating an error or warning. The result could be memory corruption, a device crash, or a potential remote attack vector without the originating device receiving a CIP error indicating that the request could not be processed. |
| A flaw was found in Flatpak. A Time-of-check to time-of-use (TOCTOU) race condition exists in the `org.freedesktop.Flatpak.SystemHelper` component. This vulnerability occurs because a privileged `chmod` operation executes before the OSTree repository validation within the `Deploy()` function. An attacker can exploit this timing window to redirect symlinks to arbitrary files, potentially leading to unauthorized file manipulation or information disclosure. |
| Tycon Systems TPDIN-Monitor-WEB3 versions 2.2.9 and prior are vulnerable to a Missing Authorization vulnerability. This could allow an attacker to extract system credentials, configurations, or flash contents. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbfs: fix use-after-free of usb_device in usbdev_release()
usbdev_release() drops its reference to the struct usb_device before
draining the list of completed async URBs, but that drain path reads back
through the same object: free_async() calls dec_usb_memory_use_count()
for any URB whose buffer came from the usbfs mmap() region, and its first
statement is bus_to_hcd(ps->dev->bus).
After a disconnect the usbfs reference can be the last one, in which case
usb_put_dev() frees the device and the subsequent loop reads offset 80 of
freed memory and uses the result as a struct usb_hcd *, which
hcd_buffer_free_pages() then dereferences.
This is reachable by an unprivileged process that has read/write access to
a /dev/bus/usb node: mmap() the fd, submit one URB with a buffer inside the
mapping, wait for the device to be unplugged, then munmap() and close().
It reproduces on every attempt rather than being a race, because a live
MAP_SHARED vma holds a reference on the struct file, so usbdev_release()
cannot run until the last vma is gone and the freeing branch of
dec_usb_memory_use_count() is always taken.
BUG: KASAN: slab-use-after-free in dec_usb_memory_use_count+0x3ae/0x410
Read of size 8 at addr ffff8880122ee050 by task poc/769
CPU: 1 UID: 1000 PID: 769 Comm: poc Tainted: G B 6.12.94 #3
Call Trace:
dec_usb_memory_use_count+0x3ae/0x410
free_async+0x2aa/0x4f0
usbdev_release+0x375/0x460
__fput+0x3ea/0xb50
__x64_sys_close+0x86/0x100
Allocated by task 11:
usb_alloc_dev+0x55/0xd90
hub_event+0x2524/0x43d0
Freed by task 769:
kfree+0x121/0x360
device_release+0xd2/0x280
usb_put_dev+0x23/0x30
usbdev_release+0x2d8/0x460
Release the device reference after the drain loop instead. Nothing between
the two points requires it to have been dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qce - fix CCM AAD buffer underallocation
The AAD buffer allocated in qce_aead_ccm_prepare_buf_assoclen()
can be smaller than the length later programmed into the DMA
scatterlist.
The allocation size is currently calculated as:
ALIGN(assoclen, 16) + MAX_CCM_ADATA_HEADER_LEN
while the DMA length is set to:
ALIGN(assoclen + adata_header_len, 16)
Since ALIGN() does not distribute over addition, the allocation
can be smaller than the DMA length. For example, when
assoclen = 32 and adata_header_len = 2:
allocation = ALIGN(32, 16) + 6 = 38
DMA length = ALIGN(32 + 2, 16) = 48
As a result, the QCE hardware can read beyond the allocated
buffer while computing the CBC-MAC over the associated data.
The extra bytes are folded into the authentication tag,
resulting in an incorrect tag and causing CCM self-test
failures such as:
alg: aead: ccm-aes-qce encryption test failed (wrong result)
on test vector 8
Fix the allocation by adding the maximum possible AAD header
length before alignment:
ALIGN(assoclen + MAX_CCM_ADATA_HEADER_LEN, 16)
This guarantees that the allocated buffer is large enough
for the fully padded AAD data for all supported header sizes. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Allocate full pages for {DE,EN}CRYPT ops on SNP-enabled hosts
When {de,en}crypting memory of an SEV or SEV-ES guest on an SNP-enabled
host via a temporary buffer, allocate a full 4KiB page for the buffer to
ensure the page containing the buffer is wholly owned by KVM, i.e. won't
be concurrently allocated and accessed by other kernel code while KVM is
using the buffer to {de,en}crypt memory. On SNP-enabled platforms, when
sending SEV/SEV-ES commands that trigger firmware writes to memory, the
to-be-written page(s) must be (temporarily) assigned to Firmware (as
required by the SNP architecture, to guard against using such commands as
gadgets to attack SNP guests). See snp_map_cmd_buf_desc() and friends.
Unfortunately, transferring ownership of a page to Firmware makes the page
inaccessible to software, and thus writes generate RMP #PF violations. If
KVM uses a sub-page allocation for its temporary buffer, some other actor
in the kernel can allocate and use the other portions of the page, and thus
trigger unexpected (and seemingly spurious) RMP #PF violations due to
software attempting to access a Firmware-owned page.
BUG: unable to handle page fault for address: ffff906ae30f0300
#PF: supervisor write access in kernel mode
#PF: error_code(0x80000003) - RMP violation
PGD 6b1b80d067 P4D 6b1b80d067 PUD 100231e2063 PMD 10055a88063 PTE 80000100630f0163
SEV-SNP: PFN 0x100630f0 unassigned, dumping non-zero entries in 2M PFN region: [0x10063000 - 0x10063200]
Oops: Oops: 0003 [#1] SMP
CPU: 70 UID: 0 PID: 10658 Comm: svw_WaiterThrea Tainted: G U W O 7.1.0-smp--c22293789940-seanjc-next #1 PREEMPTLAZY
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026
RIP: 0010:memset+0xf/0x20
Call Trace:
<TASK>
__kvmalloc_node_noprof+0x2a4/0x710
do_getxattr+0x4e/0x130
path_getxattrat+0x125/0x1b0
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f3a22cb6daa
</TASK>
Modules linked in: kvm_amd kvm irqbypass vfat fat ccp k10temp sha3 libsha3 i2c_piix4 gq(O) cdc_acm xhci_pci xhci_hcd
gsmi: Log Shutdown Reason 0x03
CR2: ffff906ae30f0300
---[ end trace 0000000000000000 ]---
RIP: 0010:memset+0xf/0x20
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x39e00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
gsmi: Log Shutdown Reason 0x02 |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix invalidate lock leak on setattr writeback failure
fuse_do_setattr() takes filemap_invalidate_lock() for a DAX truncate
(fault_blocked = true) and releases it at the out:/error: labels. But
when a writeback flush is also needed, a write_inode_now() failure
returns directly and leaks the lock, so any later fault or truncate on
the file stalls on the stale rwsem.
For example, truncate(2) on a setuid file reaches fuse_do_setattr()
with both ATTR_SIZE and ATTR_MODE set:
truncate(2)
└─ do_truncate()
├─ dentry_needs_remove_privs() # S_ISUID
└─ notify_change() # KILL_SUID -> ATTR_MODE
└─ fuse_setattr() # no killpriv:
│ # ia_valid |= ATTR_MODE
└─ fuse_do_setattr()
├─ filemap_invalidate_lock() # IS_DAX && is_truncate
└─ write_inode_now() # is_wb && ATTR_MODE
└─ if (err) # e.g. daemon -> -EIO
return err # <- lock leaked
Fix this by adding an unlock label that releases the lock before
returning the error, and use it for the fuse_dax_break_layouts()
failure path as well. |
