| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The YoSmart YoLink Smart Hub device 0382 exposes a UART debug interface. An attacker with direct physical access can leverage this interface to read a boot log, which includes network access credentials. |
| Components of the YoSmart YoLink ecosystem through 2025-10-02 leverage unencrypted MQTT to communicate over the internet. An attacker with the ability to monitor network traffic could therefore obtain sensitive information or tamper with the traffic to control affected devices. This affects YoLink Hub 0382, YoLink Mobile Application 1.40.41, and YoLink MQTT Broker. NOTE: The vendor states that the vulnerability described (related to insecure transmission) only impacts the legacy mobile application logic, not the Hub hardware or firmware. The Hub functions solely as a pass-through (transparent gateway) for LoRa wireless data and does not inspect or process the application layer data. |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it.
Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution.
This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow.
process_frame_obj initializes the buffers based on the frame resolution:
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data.
We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size.
We recommend upgrading to version 8.0 or beyond. |
| An issue in Orban Optimod 5950, Optimod 5950HD, Optimod 5750, Optimod 5750HD, Optimod Trio Optimod version 1.0.0.33 - System version 2.5.26 allows a remote attacker to escalate privileges via the application stores user privilege/role information in client-side browser storage |
| A stored cross-site scripting (XSS) vulnerability in Optimod 5950 - Optimod 5950HD - Optimod 5750 - Optimod 5750HD - Optimod Trio - Optimod version 1.0.0.33 - System version 2.5.26, allows remote attackers to execute arbitrary JavaScript in the web browser of a user, by including a malicious payload into the logs which would be returned in logs rendered in the UI. |
| python-socketio is a Python implementation of the Socket.IO realtime client and server. A remote code execution vulnerability in python-socketio versions prior to 5.14.0 allows attackers to execute arbitrary Python code through malicious pickle deserialization in multi-server deployments on which the attacker previously gained access to the message queue that the servers use for internal communications. When Socket.IO servers are configured to use a message queue backend such as Redis for inter-server communication, messages sent between the servers are encoded using the `pickle` Python module. When a server receives one of these messages through the message queue, it assumes it is trusted and immediately deserializes it. The vulnerability stems from deserialization of messages using Python's `pickle.loads()` function. Having previously obtained access to the message queue, the attacker can send a python-socketio server a crafted pickle payload that executes arbitrary code during deserialization via Python's `__reduce__` method. This vulnerability only affects deployments with a compromised message queue. The attack can lead to the attacker executing random code in the context of, and with the privileges of a Socket.IO server process. Single-server systems that do not use a message queue, and multi-server systems with a secure message queue are not vulnerable. In addition to making sure standard security practices are followed in the deployment of the message queue, users of the python-socketio package can upgrade to version 5.14.0 or newer, which remove the `pickle` module and use the much safer JSON encoding for inter-server messaging. |
| Bucket is a MediaWiki extension to store and retrieve structured data on articles. Prior to version 1.0.0, infinite recursion can occur if a user queries a bucket using the `!=` comparator. This will result in PHP's call stack limit exceeding, and/or increased memory consumption, potentially leading to a denial of service. Version 1.0.0 contains a patch for the issue. |
| KUNO CMS is a fully deployable full-stack blog application. In versions prior to 1.3.15, an SSRF (Server-Side Request Forgery) vulnerability exists in the Media module of the Kuno CMS administrative panel. A logged-in administrator can upload a specially crafted SVG file containing an external image reference, causing the server to initiate an outgoing connection to an arbitrary external URL. This can lead to information disclosure or internal network probing. Version 1.3.15 contains a fix for the issue. |
| PyVista provides 3D plotting and mesh analysis through an interface for the Visualization Toolkit (VTK). Version 0.46.3 of the PyVista Project is vulnerable to remote code execution via dependency confusion. Two pieces of code use`--extra-index-url`. But when `--extra-index-url` is used, pip always checks for the PyPI index first, and then the external index. One package listed in the code is not published in PyPI. If an attacker publishes a package with higher version in PyPI, the malicious code from the attacker controlled package may be pulled, leading to remote code execution and a supply chain attack. As of time of publication, a patched version is unavailable. |
| Akka.NET is a .NET port of the Akka project from the Scala / Java community. In all versions of Akka.Remote from v1.2.0 to v1.5.51, TLS could be enabled via our `akka.remote.dot-netty.tcp` transport and this would correctly enforce private key validation on the server-side of inbound connections. Akka.Remote, however, never asked the outbound-connecting client to present ITS certificate - therefore it's possible for untrusted parties to connect to a private key'd Akka.NET cluster and begin communicating with it without any certificate. The issue here is that for certificate-based authentication to work properly, ensuring that all members of the Akka.Remote network are secured with the same private key, Akka.Remote needed to implement mutual TLS. This was not the case before Akka.NET v1.5.52. Those who run Akka.NET inside a private network that they fully control or who were never using TLS in the first place are now affected by the bug. However, those who use TLS to secure their networks must upgrade to Akka.NET V1.5.52 or later. One patch forces "fail fast" semantics if TLS is enabled but the private key is missing or invalid. Previous versions would only check that once connection attempts occurred. The second patch, a critical fix, enforces mutual TLS (mTLS) by default, so both parties must be keyed using the same certificate. As a workaround, avoid exposing the application publicly to avoid the vulnerability having a practical impact on one's application. However, upgrading to version 1.5.52 is still recommended by the maintainers. |
| A null pointer dereference vulnerability exists in the IOMap64.sys driver of ASUS AI Suite 3. The vulnerability can be triggered by a specially crafted input, which may lead to a system crash (BSOD). Refer to the '
Security Update for for AI Suite 3
' section on the ASUS Security Advisory for more information. |
| Cursor is a code editor built for programming with AI. In versions and below, a vulnerability in the Cursor CLI Beta allowed an attacker to achieve remote code execution through the MCP (Model Context Protocol) server mechanism by uploading a malicious MCP configuration in .cursor/mcp.json file in a GitHub repository. Once a victim clones the project and opens it using Cursor CLI, the command to run the malicious MCP server is immediately executed without any warning, leading to potential code execution as soon as the command runs. This issue is fixed in version 2025.09.17-25b418f. |
| A flaw was found in Hive, a component of Multicluster Engine (MCE) and Advanced Cluster Management (ACM). This vulnerability causes VCenter credentials to be exposed in the ClusterProvision object after provisioning a VSphere cluster. Users with read access to ClusterProvision objects can extract sensitive credentials even if they do not have direct access to Kubernetes Secrets. This issue can lead to unauthorized VCenter access, cluster management, and privilege escalation. |
| KUNBUS PiCtory version 2.11.1 and earlier are vulnerable to a cross-site-scripting attack via the sso_token used for authentication. If an attacker provides the user with a PiCtory URL containing an HTML script as an sso_token, that script will reply to the user and be executed. |
| Missing Authorization vulnerability in WebToffee Order Export & Order Import for WooCommerce order-import-export-for-woocommerce allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Order Export & Order Import for WooCommerce: from n/a through <= 2.6.7. |
| A vulnerability was found in Shenzhen Mingyuan Cloud Technology Mingyuan Real Estate ERP System 1.0. It has been rated as critical. This issue affects some unknown processing of the file /Kfxt/Service.asmx of the component HTTP Header Handler. The manipulation of the argument X-Forwarded-For leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in Oiwtech OIW-2431APGN-HP 2.5.3-B20131128 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formScript of the component Personal Script Submenu. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| WebPros Plesk before 18.0.73.5 and 18.0.74 before 18.0.74.2 on Linux allows remote authenticated users to execute arbitrary code as root via domain creation. The attacker needs "Create and manage sites" with "Domains management" and "Subdomains management." |
| The HTMLSectionSplitter class in langchain-text-splitters version 0.3.8 is vulnerable to XML External Entity (XXE) attacks due to unsafe XSLT parsing. This vulnerability arises because the class allows the use of arbitrary XSLT stylesheets, which are parsed using lxml.etree.parse() and lxml.etree.XSLT() without any hardening measures. In lxml versions up to 4.9.x, external entities are resolved by default, allowing attackers to read arbitrary local files or perform outbound HTTP(S) fetches. In lxml versions 5.0 and above, while entity expansion is disabled, the XSLT document() function can still read any URI unless XSLTAccessControl is applied. This vulnerability allows remote attackers to gain read-only access to any file the LangChain process can reach, including sensitive files such as SSH keys, environment files, source code, or cloud metadata. No authentication, special privileges, or user interaction are required, and the issue is exploitable in default deployments that enable custom XSLT. |
