| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The do_change_cipher_spec function in OpenSSL 0.9.6c to 0.9.6k, and 0.9.7a to 0.9.7c, allows remote attackers to cause a denial of service (crash) via a crafted SSL/TLS handshake that triggers a null dereference. |
| Race condition in ip_vs_conn_flush in Linux 2.6 before 2.6.13 and 2.4 before 2.4.32-pre2, when running on SMP systems, allows local users to cause a denial of service (null dereference) by causing a connection timer to expire while the connection table is being flushed before the appropriate lock is acquired. |
| The Negotiate Security Software Provider (SSP) interface in Windows 2000, Windows XP, and Windows Server 2003, allows remote attackers to cause a denial of service (crash from null dereference) or execute arbitrary code via a crafted SPNEGO NegTokenInit request during authentication protocol selection. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: detach and close netdevs while handling a reset
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: Fix RSS LUT NULL ptr issue after soft reset
During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20
** display the RSS LUT
ethtool -x eth1
[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793] <TASK>
[82375.558804] rss_prepare.isra.0+0x187/0x2a0
[82375.558827] rss_prepare_data+0x3a/0x50
[82375.558845] ethnl_default_doit+0x13d/0x3e0
[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886] genl_rcv_msg+0x1ad/0x2b0
[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937] netlink_rcv_skb+0x58/0x100
[82375.558957] genl_rcv+0x2c/0x50
[82375.558971] netlink_unicast+0x289/0x3e0
[82375.558988] netlink_sendmsg+0x215/0x440
[82375.559005] __sys_sendto+0x234/0x240
[82375.559555] __x64_sys_sendto+0x28/0x30
[82375.560068] x64_sys_call+0x1909/0x1da0
[82375.560576] do_syscall_64+0x7a/0xfa0
[82375.561076] ? clear_bhb_loop+0x60/0xb0
[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip> |
| Null pointer dereference in Windows LDAP - Lightweight Directory Access Protocol allows an unauthorized attacker to deny service over a network. |
| The application does not validate the presence of required appearance (AP) data before accessing stamp annotation resources. When a PDF contains a stamp annotation missing its AP entry, the code continues to dereference the associated object without a prior null or validity check, which allows a crafted document to trigger a null pointer dereference and crash the application, resulting in denial of service. |
| In systemd 260 before 261, a local unprivileged user can trigger an assert via an IPC API call with an array or map that has a null element. |
| A NULL Pointer Dereference vulnerability in Cesanta Frozen versions less than 1.7 allows an attacker to induce a crash of the component embedding the library by supplying a maliciously crafted JSON as input. |
| A null pointer dereference vulnerability in the Palo Alto Networks Cortex® XDR agent on Windows devices allows a low-privileged local Windows user to crash the agent. Additionally, malware can use this vulnerability to perform malicious activity without Cortex XDR being able to detect it. |
| In Alinto SOPE SOGo 2.0.2 through 5.12.2, sope-core/NGExtensions/NGHashMap.m allows a NULL pointer dereference and SOGo crash via a request in which a parameter in the query string is a duplicate of a parameter in the POST body. |
| A null pointer dereference in Palo Alto Networks PAN-OS software on PA-800 Series, PA-3200 Series, PA-5200 Series, and PA-7000 Series hardware platforms when Decryption policy is enabled allows an unauthenticated attacker to crash PAN-OS by sending specific traffic through the data plane, resulting in a denial of service (DoS) condition. Repeated attempts to trigger this condition will result in PAN-OS entering maintenance mode.
Palo Alto Networks VM-Series, Cloud NGFW, and Prisma Access are not affected.
This issue only affects PA-800 Series, PA-3200 Series, PA-5200 Series, and PA-7000 Series running these specific versions of PAN-OS:
* 10.2.7-h12
* 10.2.8-h10
* 10.2.9-h9
* 10.2.9-h11
* 10.2.10-h2
* 10.2.10-h3
* 10.2.11
* 10.2.11-h1
* 10.2.11-h2
* 10.2.11-h3
* 11.1.2-h9
* 11.1.2-h12
* 11.1.3-h2
* 11.1.3-h4
* 11.1.3-h6
* 11.2.2
* 11.2.2-h1 |
| An unauthenticated attacker can perform a null pointer dereference in the DHIP Service (UDP port 37810). This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111. |
| Joda Time v2.12.5 was discovered to contain a NullPointerException via the component org.joda.time.format.PeriodFormat::wordBased(Locale). NOTE: this is disputed by multiple third parties who believe there was not reasonable evidence to determine the existence of a vulnerability. The submission may have been based on a tool that is not sufficiently robust for vulnerability identification. |
| NULL pointer dereference in some Intel(R) PROSet/Wireless WiFi and Killerâ„¢ WiFi software for Windows before version 23.80 may allow an unauthenticated user to potentially enable denial of service via adjacent access. |
| A NULL pointer dereference in the component libPdfCore.dll of Wondershare PDF Reader v1.0.9.2544 allows attackers to cause a Denial of Service (DoS) via a crafted PDF file. |
| Cairo through 1.18.4, as used in Poppler through 25.08.0, has an "unscaled->face == NULL" assertion failure for _cairo_ft_unscaled_font_fini in cairo-ft-font.c. |
| Watchdog Antivirus v1.6.415 is vulnerable to a Denial of Service vulnerability by triggering the 0x80002014 IOCTL code of the wsdk-driver.sys driver. |
| A NULL pointer dereference vulnerability has been identified in the JavaScript library microlight version 0.0.7, a lightweight syntax highlighting library. When processing elements with non-standard CSS color values, the library fails to validate the result of a regular expression match before accessing its properties, leading to an uncaught TypeError and potential application crash. NOTE: this is disputed by multiple parties because there is no common scenario in which an adversary can insert those non-standard values. |
| A vulnerability has been identified in JT Open (All versions < V11.5), JT2Go (All versions < V2406.0003), PLM XML SDK (All versions < V7.1.0.014), Teamcenter Visualization V14.2 (All versions < V14.2.0.13), Teamcenter Visualization V14.3 (All versions < V14.3.0.11), Teamcenter Visualization V2312 (All versions < V2312.0008), Teamcenter Visualization V2406 (All versions < V2406.0003). The affected applications contain a null pointer dereference vulnerability while parsing specially crafted XML files. An attacker could leverage this vulnerability to crash the application causing denial of service condition. |
