| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component.
The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route. |
| Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component.
The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route. |
| Successfully using libcurl to do a transfer to a specific HTTP origin
(`hostA`) with **Digest** authentication and then changing the origin to a
different one (`hostB`) for a second transfer, reusing the same handle, makes
libcurl wrongly pass on the `Authorization:` header field meant for `hostA`,
to `hostB`. |
| When a user invokes curl using a schemeless URL combined with
`--proto-default` sftp (or scp), a disconnect occurs between the tool layer
and libcurl. The tool layer incorrectly infers the URL scheme, which
erroneously bypasses the initialization of critical SSH security options like
CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256 and CURLOPT_SSH_KNOWNHOSTS. Conversely, the
libcurl runtime successfully honors CURLOPT_DEFAULT_PROTOCOL and establishes
the connection via SFTP/SCP as specified. Because the tool layer skipped the
security configuration, these SSH host verification options are silently
omitted, causing curl to connect to an unverified SSH remote host without
throwing an error. |
| The curl logic that works with SASL authentication could end up cleaning up
the GSASL context *twice* without clearing the pointer in between, making it
`free()` the same pointer twice. |
| When asking curl to use a `.netrc` file to find credentials and at the same
time specifying a URL with a username(without a password), like
`https://user@example.com/`, curl could wrongly get and use the password for
*another* user set in the `.netrc` file for that host if such a one exists and
there is no match for the specified user. |
| Dell Client Platform BIOS contains an Authentication Bypass by Primary Weakness vulnerability. An unauthenticated attacker with physical access could potentially exploit this vulnerability, leading to Information Disclosure. |
| In Eclipse Theia since version 1.26.0, the backend /services/request-service RPC accepts an attacker-controlled URL from any client connected to the standard /services messaging endpoint, performs the HTTP request server-side, and returns the full response body to the caller.
Because the destination URL is neither validated nor allowlisted, a remote attacker with access to the Theia service connection can issue server-side HTTP requests to localhost or other backend-reachable hosts and read their responses, exposing internal administrative endpoints, cloud instance metadata services, and other resources that are intentionally outside the browser network boundary.
The vulnerability affects deployments where the Theia service connection is reachable by untrusted users (for example, multi-tenant or publicly-reachable Theia deployments). |
| Authentication Bypass by Spoofing vulnerability in Apache IoTDB.
Certain Thrift RPC query handlers lack strict validation of the sessionId
parameter. An attacker can construct requests with a forged sessionId and,
without performing openSession authentication, receive valid query results.
This allows authentication bypass and unauthorized reading of time-series
data.
This issue affects Apache IoTDB: from 1.3.3 before 2.0.8.
Users are recommended to upgrade to version 2.0.8, which fixes the issue. |
| Deserialization of Untrusted Data vulnerability in Apache Camel, Apache Camel JMS component.
JmsBinding.extractBodyFromJms() in camel-jms - and the equivalent JmsBinding in camel-sjms - deserializes the payload of an incoming JMS ObjectMessage via jakarta.jms.ObjectMessage.getObject() whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer. The CVE-2026-40860 hardening added a post-deserialization class check that rejects classes outside the default allow-list java.**;javax.**;org.apache.camel.**;!*. However org.apache.camel.support.DefaultExchangeHolder itself lives in the allow-listed org.apache.camel.** namespace, so an ObjectMessage whose top-level object is a DefaultExchangeHolder passes the check. The receiving side then calls DefaultExchangeHolder.unmarshal() on it without requiring the transferExchange option to be enabled - an asymmetric trust boundary, since the sending side gates ObjectMessage and transferExchange handling but the receiving side did not - writing every non-null field of the holder into the Exchange: the message body, the IN and OUT headers, the exchange properties, the variables, the exchange id and the exception. An attacker who can publish an ObjectMessage to a queue or topic consumed by an affected Camel application can therefore inject arbitrary Exchange state using only universally-trusted java.lang and java.util types, with no deserialization gadget chain required, to manipulate routing and headers, exchange properties and error handling. The same handling applies to camel-sjms and camel-sjms2, and to the JMS-family components built on JmsComponent and JmsBinding: camel-amqp, camel-activemq and camel-activemq6. This is a bypass of the CVE-2026-40860 fix rather than a flaw in it.
This issue affects Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0; Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, JMS ObjectMessage handling is disabled by default in camel-jms, camel-sjms and the JMS-family components (a new objectMessageEnabled option defaults to false at the component and endpoint level), so an incoming ObjectMessage - including a DefaultExchangeHolder payload - is no longer deserialized unless the option is explicitly enabled; only set objectMessageEnabled=true when the consumed JMS destination is fed exclusively by trusted producers. For deployments that cannot upgrade immediately, restrict publish access to the queues and topics consumed by Camel to trusted producers via JMS broker authorization, and do not expose JMS consumers that map ObjectMessage bodies to untrusted networks; a JMS-provider deserialization allow-list does not mitigate this specific bypass because the crafted payload uses only universally-trusted classes. |
| A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service. |
| A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption. |
| A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service. |
| Apache IoTDB DataNode’s internal RPC interface for creating Trigger instances uses the uploaded Trigger JAR name to build a file path without sufficient validation. If the internal DataNode RPC port is exposed to an untrusted network, an attacker may use path traversal sequences in the JAR name to write files outside the intended Trigger installation directory. This could allow arbitrary file write with the permissions of the IoTDB process.
This issue affects Apache IoTDB: from 1.3.3 before 2.0.8.
Users are recommended to upgrade to version 2.0.8, which fixes the issue. |
| Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component.
The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer. |
| A vulnerability has been found in ForceInjection AI-fundermentals 2.0/3.0. Affected by this vulnerability is the function get_conversation_history of the file 08_agentic_system/memory/langchain/code/smart_customer_service.py of the component Memory Recall Handler. The manipulation leads to use of weak hash. Remote exploitation of the attack is possible. A high degree of complexity is needed for the attack. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is f57277fdd9ba373ace72d83c272023ec67f720d6. It is suggested to install a patch to address this issue. The project confirms (translated from Chinese): "We now require session ownership verification in methods such as `username`, `sessionowner`, etc., and we've chat()changed the generation of `sessionowner` to include verified user identity and security context metadata." |
| A security vulnerability has been detected in kirilkirkov Ecommerce-CodeIgniter-Bootstrap up to 13fd582aaf49aeab7438acc0fc3eb973a1f5e6a7. The affected element is the function getCartItems in the library application/libraries/ShoppingCart.php. The manipulation of the argument shopping_cart leads to deserialization. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The identifier of the patch is 49b20f53de2b7ec34e920b11c863f1491d911a04. It is recommended to apply a patch to fix this issue. |
| Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel IRC component.
The camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint, and the message is sent only to the specified destination. This and the component's other control headers (irc.target, irc.messageType, irc.user.*, irc.num, irc.value) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into an irc: producer, any HTTP client could therefore set the irc.sendTo header and redirect a message that the route intended for a configured channel to an arbitrary IRC channel or user - exfiltrating the message content to an attacker-chosen nickname, leaking it into a public channel, or delivering messages that appear to come from the bot. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set IRC headers via the raw header names must use the CamelIrc* names (for example CamelIrcSendTo) instead of the old irc.* values. For deployments that cannot upgrade immediately, strip the irc.* headers from any untrusted ingress before the irc: producer (for example removeHeaders('irc.*') at the start of the route), and set the IRC destination from a trusted source. |
| A flaw has been found in AIAnytime Awesome-MCP-Server up to a884bb51bcd99e08e14fd712c749d55d9d9a13ab. Affected by this issue is some unknown functionality of the file mcp-wiki/src/mcp_wiki/server.py of the component mcp-wiki/wiki-summary. This manipulation of the argument url causes server-side request forgery. The attack may be initiated remotely. The exploit has been published and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.6, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an improper access control vulnerability in the RBAC. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to information tampering. |
