| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rpcrdma: arm rn_done before publishing the notification
rpcrdma_rn_register() inserts @rn into rd_xa with xa_alloc() before
storing the caller's callback in rn->rn_done. The xarray makes @rn
reachable to rpcrdma_remove_one(), which walks rd_xa and invokes
rn->rn_done(rn) for every registered notification. A device removal
that races a fresh registration can therefore observe @rn with
rn_done still NULL, because the notification objects are zero
allocated by their owners, and call through a NULL function pointer.
Store rn->rn_done before xa_alloc() publishes @rn. The xarray's
store-side and load-side ordering then guarantees that any CPU which
finds @rn in rd_xa also observes the armed callback.
rpcrdma_rn_unregister() treats a non-NULL rn_done as the sentinel
for a completed registration, so the early store must not survive a
failed registration. Clear rn_done again when xa_alloc() fails.
Were it left set, the failed-accept cleanup path would call
rpcrdma_rn_unregister() on an @rn that was never inserted, erasing
an unrelated rd_xa slot and underflowing rd_kref. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Avoid req_q_map double-read in qla2x00_error_entry()
qla2x00_error_entry() reads ha->req_q_map[que] twice: once for the NULL
check and again when assigning it to req. The map slot is cleared by
qla25xx_free_req_que() (ha->req_q_map[que_id] = NULL under mq_lock)
during queue teardown, while the response-queue interrupt that drives
qla2x00_error_entry() is still registered (the IRQ is released later in
qla25xx_free_rsp_que()). If the slot is set to NULL between the two
reads, req becomes NULL and is dereferenced.
Read the slot once into req and NULL-check the local before use. mq_lock
is a mutex and cannot be taken from interrupt context, so the single
read plus local check is the appropriate fix for the reported NULL
dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: check MMIO mapping errors in probe
devm_platform_ioremap_resource() returns an error pointer when the register
resource cannot be mapped. ethosu_probe() stores it and continues until
initialization dereferences it through MMIO accessors.
Return the mapping error before initializing the device. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: storage: realtek_cr: fix use-after-free on disconnect
realtek_cr_destructor() calls timer_delete() before the chip containing
the timer is freed. The timer callback may still be running and can
rearm itself, resulting in a use-after-free.
Use timer_shutdown_sync() to wait for the callback and prevent further
rearming. Do this unconditionally because ss_en may be changed after
the timer is armed.
Move timer_setup() into init_realtek_cr() so the timer is initialized
before any failure path can invoke the destructor.
Found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped
Wire up a gmem_invalidate_range() call for SNP VMs, and use it to force
vCPUs to reload/recheck their guest-provided VMSA if the backing gmem
page is being invalidated, e.g. is being PUNCH_HOLE'd. Use the same core
logic to handle invalidations as VMX does for the APIC-access page, as the
two concepts are nearly identical: shove the physical address of a page
into the vCPU's control structure:
1. Snapshot the invalidation sequence counter
2. Grab the pfn (from guest_memfd in this case)
3. Acquire mmu_lock for read
4. Re-request reload if retry is needed, otherwise commit the change.
Note, the re-request action in #4 is necessary as KVM's retry logic is
fuzzy, i.e. can get false positives. If the guest_memfd page has been
dropped, at some point a subsequent reload will fail to get a PFN from
guest_memfd, and KVM will fail KVM_RUN. If the retry was due to a false
positive, KVM will retry until there are no relevant MMU notifier events
(and will retry in the "outer" loop, i.e. will drop locks and resched as
needed).
Note #2! Take care to invalidate the VMSA when a relevant memslot is
DELETED or MOVED, as invalidations in response to PUNCH_HOLE are predicated
on memslot bindings (KVM doesn't know what GFN range(s) to invalidate
without a binding). And more importantly, the VMSA mapping requires a
memslot, i.e. must be invalidated if its memslots disappears, regardless of
the state of the underlying guest_memfd inode.
Failure to invalidate the vCPU's control.vmsa_pa (which is checked by
pre_sev_run()) can prevent KVM from properly freeing the page as firmware
will reject the RMPUPDATE to reclaim the page with FAIL_INUSE if the vCPU
is actively running, i.e. if VMSA page is in-use. That in turn leads to an
RMP #PF on the next use, as the page will still be assigned to the SNP VM.
SEV-SNP: RMPUPDATE failed for PFN 78d198, pg_level: 1, ret: 3
SEV-SNP: PFN 0x78d198, RMP entry: [0xfff0000000144001 - 0x000000000000000f]
CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026
Call Trace:
<TASK>
dump_stack_lvl+0x54/0x70
rmpupdate+0x12c/0x140
rmp_make_shared+0x3b/0x60
sev_gmem_invalidate+0xe0/0x170 [kvm_amd]
delete_from_page_cache_batch+0x1d8/0x220
truncate_inode_pages_range+0x120/0x3d0
kvm_gmem_fallocate+0x19a/0x270 [kvm]
vfs_fallocate+0x1bc/0x1f0
__x64_sys_fallocate+0x48/0x70
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x496c7e
</TASK>
------------[ cut here ]------------
SEV: Failed to update RMP entry for PFN 0x78d198 error -14
WARNING: arch/x86/kvm/svm/sev.c:5160 at sev_gmem_invalidate+0x126/0x170 [kvm_amd], CPU#3: sev_snp_vmsa_pu/31345
CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026
RIP: 0010:sev_gmem_invalidate+0x12b/0x170 [kvm_amd]
Call Trace:
<TASK>
delete_from_page_cache_batch+0x1d8/0x220
truncate_inode_pages_range+0x120/0x3d0
kvm_gmem_fallocate+0x19a/0x270 [kvm]
vfs_fallocate+0x1bc/0x1f0
__x64_sys_fallocate+0x48/0x70
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x496c7e
</TASK>
irq event stamp: 20689
hardirqs last enabled at (20699): [<ffffffff8e76092c>] __console_unlock+0x5c/0x60
hardirqs last disabled at (20708): [<ffffffff8e760911>] __console_unlock+0x41/0x60
softirqs last enabled at (20722): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140
softirqs last disabled at (20717): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140
---[ end trace 0000000000000000 ]---
BUG: unable to handle page fault for address: ffff99
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix debugfs UAF on adapter removal
i2c_del_adapter() frees the adapter's debugfs directory before it
unregisters the adapter device, but the new_device sysfs attribute
stays writable until device_del(). A write racing with removal still
reaches i2c_device_probe(), which passes the freed adap->debugfs to
debugfs_create_dir() as the new client's parent:
BUG: KASAN: slab-use-after-free in lookup_noperm_common+0x407/0x430
Read of size 4 at addr ffff88803ef87810 by task syz.0.61/6090
lookup_noperm_common+0x407/0x430
simple_start_creating+0x9c/0x110
debugfs_start_creating+0xdb/0x1a0
debugfs_create_dir+0x24/0x350
i2c_device_probe+0x814/0xbf0
It's technically possible to create a client after i2c_deregister_clients
has run. That client will never be unregistered and make
wait_for_completion hang.
Close the window by removing the new_device attribute at the start of
i2c_del_adapter(). device_remove_file() will drain any clients left. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: midi2: Fix null-pointer dereference in f_midi2_free_ep_reqs
A null-pointer dereference occurs in f_midi2_free_ep_reqs() when attempting
to clean up an endpoint that was never initialized.
When configuring the MIDI 2.0 gadget via configfs and setting the block
direction to SNDRV_UMP_DIR_INPUT, the initialization of the midi1_ep_out
endpoint is explicitly skipped during the gadget bind phase
(f_midi2_bind()). As a result, the usb_ep->card field remains NULL.
Later, when the host sets the alternate setting, f_midi2_set_alt()
unconditionally stops both the IN and OUT endpoints by calling
f_midi2_stop_eps(), which in turn calls f_midi2_free_ep_reqs() for both
endpoints. When f_midi2_free_ep_reqs() is called for the uninitialized
midi1_ep_out, it attempts to dereference usb_ep->card to determine the
number of requests to free, leading to a crash.
Fix this by using usb_ep->num_reqs instead of usb_ep->card->info.num_reqs
in f_midi2_free_ep_reqs(). usb_ep->num_reqs is correctly set during
f_midi2_init_ep() and remains 0 if the endpoint was never initialized,
safely avoiding the loop. For consistency, apply the same change to
f_midi2_alloc_ep_reqs().
Oops: general protection fault, probably for non-canonical address
0xdffffc00000000ee: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000770-0x0000000000000777]
...
RIP: 0010:f_midi2_free_ep_reqs drivers/usb/gadget/function/f_midi2.c:1166
[inline]
RIP: 0010:f_midi2_stop_eps+0x28e/0x4d0
drivers/usb/gadget/function/f_midi2.c:1246
...
Call Trace:
<TASK>
f_midi2_set_alt+0x11c/0xf00 drivers/usb/gadget/function/f_midi2.c:1296
composite_setup+0x1ffd/0x3480 drivers/usb/gadget/composite.c:1933
configfs_composite_setup+0xbd/0x100 drivers/usb/gadget/configfs.c:1877 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix infinite loop in pcpu_freelist push with one possible CPU
__pcpu_freelist_push() can loop forever when only one CPU is possible
and an NMI re-enters pcpu_freelist_push() while the interrupted context
holds that CPU's freelist lock.
After the current-CPU fast path fails, the fallback loop walks
cpu_possible_mask while skipping the current CPU. With CONFIG_SMP=n, or
when an SMP kernel is limited to one possible CPU with nr_cpus=1 or
possible_cpus=1, there are no other possible CPUs to examine. The loop
therefore makes no lock acquisition attempt and can never make progress.
The following stack was observed on a UP system:
NMI context:
pcpu_freelist_push
free_htab_elem
htab_map_delete_elem
[perf-event BPF program]
__perf_event_overflow
perf_event_nmi_handler
exc_nmi
Interrupted context:
__pcpu_freelist_push
pcpu_freelist_push
free_htab_elem
htab_map_delete_elem
[raw_tp/sys_enter BPF program]
__bpf_trace_sys_enter
do_syscall_64
raw_res_spin_lock() detects the same-CPU recursive acquisition and
returns -EDEADLK, but the subsequent fallback loop has no candidate head
on a system with one possible CPU.
Restore the extra fallback head that existed before the rqspinlock
conversion. Keep the current-CPU fast path, then try the other possible
CPUs and finally the extra head. The additional head lets a push, which
cannot fail without losing a preallocated element, make progress when the
only per-CPU head is held by the interrupted context.
Also check the extra head from the pop path so that nodes placed there
can be reused. |
| A use-after-free vulnerability in the Linux kernel's af_unix component can be exploited to achieve local privilege escalation.
The unix_stream_sendpage() function tries to add data to the last skb in the peer's recv queue without locking the queue. Thus there is a race where unix_stream_sendpage() could access an skb locklessly that is being released by garbage collection, resulting in use-after-free.
We recommend upgrading past commit 790c2f9d15b594350ae9bca7b236f2b1859de02c (or backported equivalents). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: synopsys: dw-dp: Support unregistering the AUX channel
The DisplayPort AUX channel gets initialized and registered during
dw_dp_bind(), but it is never unregistered, which may lead to resource
leaks and/or use-after-free.
Add the missing dw_dp_unbind() function to allow the users of the
library to handle the required cleanup, i.e. unregister the AUX adapter. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/powerplay: fix VoltageObjectInfo zero-stride loop and OOB read
Reject voltage objects whose usSize is smaller than the header or would
advance the cursor past the table end, preventing an infinite loop or
heap OOB read when the VBIOS supplies a malformed VoltageObjectInfo table. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/mes: Fix hung_queue_db_array loop limit for multi-XCC
The loop iterated only AMDGPU_MAX_MES_PIPES times, leaving entries
uninitialized for multi-XCC GPUs. This causes null pointer dereferences
when accessing arrays indexed by XCC ID >= 2. Extend the loop to cover
all XCCs (AMDGPU_MAX_MES_PIPES * num_xcc), matching other per-XCC
arrays. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: glink: fix deadlock in endpoint destroy during driver detach
During driver detach, the device core holds the device mutex throughout
the driver's remove callback chain. When the rpmsg endpoint is
destroyed as part of that teardown, the GLINK endpoint destroy
implementation attempts to unregister the underlying rpmsg device.
That unregistration calls device_del(), which tries to re-acquire the
same device mutex already held higher up the stack, causing rmmod to
hang indefinitely.
The deadlock manifests with the following call chain:
[<0>] device_del+0x44/0x414 <- tries to acquire same mutex
[<0>] device_unregister+0x18/0x34
[<0>] rpmsg_unregister_device+0x28/0x4c
[<0>] qcom_glink_remove_rpmsg_device+0x70/0xc0
[<0>] qcom_glink_destroy_ept+0x58/0xbc
[<0>] rpmsg_dev_remove+0x50/0x60
[<0>] device_remove+0x4c/0x80
[<0>] device_release_driver_internal+0x1cc/0x228 <- acquires device mutex
[<0>] driver_detach+0x4c/0x98
[<0>] bus_remove_driver+0x6c/0xbc
[<0>] driver_unregister+0x30/0x60
[<0>] unregister_rpmsg_driver+0x10/0x1c
[<0>] fastrpc_exit+0x28/0x38 [fastrpc]
[<0>] __arm64_sys_delete_module+0x1b8/0x294
[<0>] invoke_syscall+0x48/0x10c
[<0>] el0_svc_common.constprop.0+0xc0/0xe0
[<0>] do_el0_svc+0x1c/0x28
[<0>] el0_svc+0x34/0x108
[<0>] el0t_64_sync_handler+0xa0/0xe4
[<0>] el0t_64_sync+0x198/0x19c
The rpmsg device unregistration inside endpoint destroy is redundant.
In both contexts where endpoint destruction is triggered:
- Driver detach path: the driver core already tears down the rpmsg
device.
- Channel close path: the rpmsg device is already unregistered before
endpoint destruction is reached.
Remove the redundant unregistration to fix the deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: Fix cleanup ordering
Commit 173e02d67494 ("OPP: Initialize scope-based pointers inline")
added initialization for all pointers. In some cases, the ordering was
changed so that *opp_table was initialized after *opp. This also changes
the order of the registered cleanup functions.
When the cleanup happens, this can cause use-after-free errors when the
last reference is released and the release function _opp_kref_release
tries to access the already freed opp->opp_table.
Initialize *opp_table before *opp again to fix this and ensure the
correct cleanup order. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition()
mtd_add_partition() does not reject the special offset value
MTDPART_OFS_RETAIN (-3), which leads to a WARN_ON in
add_mtd_device() when called through the BLKPG ioctl on NAND
devices. The RETAIN value depends on cur_offset being the end of
the previous partition, but in the dynamic partition path
cur_offset equals the offset argument itself, causing undefined
behavior.
Commit 5daa7b21496a ("mtd: prepare partition add and del functions
for ioctl requests") introduced mtd_add_partition() and correctly
rejected MTDPART_OFS_APPEND (-1) and MTDPART_OFS_NXTBLK (-2),
since those special offsets rely on cur_offset tracking the
previous partition's end. However, commit 1a31368bf92e ("mtd: add a flags
for partitions which should just leave smth. after them")
later added MTDPART_OFS_RETAIN (-3) for the static
partition table path without updating mtd_add_partition() to
also reject this value.
With offset=-3 passed via BLKPG, the RETAIN size calculation in
allocate_partition() underflows (parent_size - 0xFFFFFFFFFFFFFFFD
= parent_size + 3). If the underflow result does not appear to
leave enough space, allocate_partition() jumps to out_register via
goto, skipping erasesize initialization. This results in
erasesize=0, which triggers:
WARN_ON((!mtd->erasesize || !master->_erase) &&
!(mtd->flags & MTD_NO_ERASE))
in add_mtd_device(). If the underflow result appears to leave
enough space, a bogus partition size is calculated, but the
"out of reach" sanity check catches the invalid offset and
creates a disabled empty partition (offset=0, size=0) instead
of returning an error.
Fix this by adding MTDPART_OFS_RETAIN to the rejection list in
mtd_add_partition(), consistent with the existing handling of
APPEND and NXTBLK. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Prevent leak in its_vpe_irq_domain_alloc()
When its_irq_gic_domain_alloc() fails, the following
its_vpe_irq_domain_free() fails to invoke its_vep_teardown() for the
corresponding interrupt, which leaks the resource.
Invoke its_vpe_teardown() in the error handling path to avoid the leak.
[ tglx: Massaged change log ] |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: keembay - Initialize completion before requesting IRQ
kmb_ocs_aes_probe() requests the device IRQ before initializing
irq_completion. Once the handler is registered it can run immediately,
and ocs_aes_irq_handler() unconditionally calls complete(). An
interrupt in this window would therefore use an uninitialized
completion.
Initialize the completion before requesting the IRQ, as the sibling
OCS HCU and ECC drivers already do. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix BUG in nilfs_copy_dirty_pages() on dirty state mismatch
Syzbot reported a kernel BUG triggered within nilfs_copy_dirty_pages(),
which copies dirty DAT file folios/pages to its shadow page cache. The
BUG occurs when a retrieved dirty folio/page unexpectedly loses its
'dirty' status.
This issue arises because, since the commit referenced below, the 'dirty'
flag of a folio/page can be cleared asynchronously after the filesystem
detects metadata corruption and transitions to read-only mode.
Resolve the issue by returning an -EROFS error if the filesystem has
transitioned to read-only mode. Also change the behavior to issue a
kernel warning only once instead of triggering a kernel BUG when this
unexpected 'dirty' state is detected while the filesystem is not in
read-only mode. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix non-AQL packet accounting for MLO stations
__mt76_tx_queue_skb() overrides the wcid passed by the driver with
sta->drv_priv, so the wcid might incorrectly be changed after TX,
causing wcid->non_aql_packets to be counted on the wrong wcid. For
example, on the AP side, if a station's setup link is the 5G link and
the station uses 2G to transmit a frame, the value of non_aql_packets
is increased on the 5G wcid but decreased on the 2G wcid. Once the
inflated counter exceeds MT_MAX_NON_AQL_PKT, the TX scheduler
permanently refuses to service the station.
Drop the reassignment and account on the wcid used for transmission.
This also records the actual wcid in the queue entry. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix mmap_lock deadlock on arena lock failure
Reported by the Sashiko AI review.
arena_vm_fault() returns VM_FAULT_RETRY when it can't take
arena->spinlock, but it never took mmap_lock. The fault path assumes a
VM_FAULT_RETRY handler already dropped mmap_lock and re-takes it on the
retry, so mmap_lock gets taken twice and can deadlock:
do_user_addr_fault()
{
fault = handle_mm_fault(...); // calls arena_vm_fault()
if (fault & VM_FAULT_RETRY)
goto retry; // re-locks mmap_lock
mmap_read_unlock(mm);
}
Return VM_FAULT_SIGBUS instead, for two reasons:
1. We could keep VM_FAULT_RETRY, but then we'd have to drop the fault
lock first and cap the retry ourselves, the way __folio_lock_or_retry()
does.
2. A failed raw_res_spin_lock_irqsave() already means a possible deadlock
was detected, so retrying just hits the same lock again.
So returning VM_FAULT_RETRY here is overkill. |
